VERY URGENT.... DUMP IN PRODUCTION STOPPED TRANSACTION .

"FUNCTION GROUP J1I7 CONTAINS ERROR"
THIS DUMP ERROR IS COMING FOR ALL EXCISE AND INVOICE TRANSACTION IN PRODUCTION.
CAN ANY BODY TELL WHY THIS ERROR COMING AFTER TRANSPORTING A REQUST.
PLEASE HELP ITS VERY CRITICAL.

Hi!
Check out the given function group in SE80 transaction and try to activate it in the production system.
It will navigate you to the error.
Regards
Tamá

Similar Messages

Hi all..very urgent..problem with the transaction VL10.

Hi gurus,i having trouble in executing the transaction VL10.
the procedure is as follows.
1.Enter the transaction VL10
2.Select Sales orders Tab
Enter sales document number 16283319 to 16283320
Remaining all fields should be blank
3.Click on Execute Icon.
4.Selected two Sales Documents.
5.Clickd on Back ground icon.
6.Error i am getting is OBJECT REQUESTED IS CURRENTLY LOCKED BY USER PSREDDY.
Can anybody help me with this..very urgent and full marks wud be given.

Hi Sahil,
Go to transaction SM12, put user name PSREDDY.
Exceute it, and select all entry and delete.
After follow the same procedure, you followed early.
Hope it will solve the problem.
Regards
Krishnendu

Very Urgent : Dumps Generated in Production System, reason unknown

We are getting ABAP Dumps every second for some reason on the production system. The error analysis message is as follows :
Error analysis
The data type "MCVBAPB" was reloaded from the database while the program
was running.
However, the system found a version of the type that was newer than
the one required.
Any pointers to the reason for this will be helpful.
Kindly contribute.

Hi Booma,
Probably structure MCVBAPB was changed (either directly or by importing a transport from the QA system). These structures are stored in buffers and users already logged on will work with these buffered structures. After the change/import the system will notice a difference between the structure in the buffer and the actual one and will dump.
Normally this should only happen once for each user currently logged on. Any user logging on after the change should not have this dump.
Regards,
John.

Very Urgent : Reordering of fields in Transaction Form

Hi All,
I am trying to reorder fields on the transaction form using form personalization.
I would want to interchange the positions of Batch Source Name field and Transaction Number field.
Although I am able to interchange the fields. The Prompt of Transaction Number doesnt move with the field and hence i see an overlap of prompts of these two fields.Can you please tell me how to resolve this.
Thanks,
John.

Which version of Apps are you running ? 11.5.9 or 11.5.10 ?
Ugur YILMAZ
http://oracle-master.com

Very Urgent !!!! Transactional iviews in opening giving the error :

Hi,
Error: -5
Version: 7000
Component: ICM
Date/Time: Tue Mar 18 10:34:11 2008
Module: icxxthr_mt.c
Line: 2698
Server: sapepp_HRP_32
Error Tag: {-}
Detail: Connection to partner timed out after 60s
Any modifications i need to do ....in backend or in Portal ....
Thanks ,
Srini

Hi,
check the below threads too
[' 500 Connection time out ' error while executing the BW reports.;
[Howto increase timeout of the server when generating BI report in portal?;
Please check icm params(PROCTIMEOUT,keep-alive...) for the BW ICM and WebDispatcher both
[http://help.sap.com/saphelp_erp2005/helpdata/en/25/7e153a1a5b4c2de10000000a114084/content.htm]
vv

Very urgent: Travel Request Error in production server

Hi All,
While creating Travel request in production server, we are getting an error..
Error while writing to the database PTRV_HEAD/PTRV_PERIO/Cluster TE
Someone please help me on this. This is very urgent..
Thanks in advance!

Solved..by setting up trip number ranges..
Thanks!

Very urgent, no Transacctions Types possible to create Business Transaction

Hello, this question is very urgent, please I will be very pleased if anybody can helps me.
When I want to create a Business Transaction, at CRMD_ORDER, I dont have any Transaction Type to choose to create the Business Transaction, so I can't create anyone.
I have got many Transaction types, I am usign CRM 5.0 and I have got many Transaction Types with all Channel communication allowed.
Please check this image for further information:
<a href="http://img380.imageshack.us/my.php?image=businesspq5.jpg">http://img380.imageshack.us/my.php?image=businesspq5.jpg</a>

HI Fernando,
Please check whether all your Transaction type are in Active mode or Not.
Also check the Allowed Channels status, if it is not filled please add the same from the drop down.
Regards
Arun Kumar

Impdp error while attaching the job - Urgent - Prod batches are stopped

I am getting following error, when I invoke the following command.
impdp "'/ as sysdba'" attach ="SYS"."SYS_IMPORT_TABLE_01"
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORA-39006: internal error
ORA-39065: unexpected master process exception in DISPATCH
ORA-44003: invalid SQL name
ORA-39097: Data Pump job encountered unexpected error -44003
The actual import job was stopped with stop_job in impdp> prompt.
DB Version: 10.2.0.2.
Please throw some lights to fix this issue. Production batches are already on hold. It is very urgent.

I can't remember the number of the bug sorry, but i haven't the same issue and I had to update to 10.2.0.3.0 (I opened a SR before in my previous company when i worked)

Please help me with the following two questions, very urgent

Hi All,
Please help me with some scenerios about what are the common problems when modifying a standard script such a standard Invoice script and how can we overcome them.
What are the common problems encountered when working with SAP SMARTFORMS and how to overcome them?
Please help me with these questions, its very urgent.
Thanks in advance.
MD.

hi
hope it will help you.
reward if ehlp.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)

Dump in Production due to CALL_FUNCTION_OPEN_ERROR???

Hi all,
I am getting lot of dumps in Production with following details
What happened?
Error in ABAP application program.
The current ABAP program "SAPLOLEA" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An error occurred when executing a Remote Function Call.
"Protocol error when communicating with SAPGUI."
Status of connection.... "RFC DRV=GUI INPUT"
Internal error code.... "RFC_IO20"
When communicating with SAPGUI, a protocol error was detected.
Any have Idea for this ?

Dear Vipin
That is a very complicated error, difficult to analyze.
First I would recommend an update of the SAP GUI onto the newest patch
level. Additionally please update the SAP kernel to the latest patchlevel and the RFC libraries!
If that all should not help, deeper analyses are to be made so in your system.
For that you should then create a support message.
Best regards
Sven

Personnel Data Iview Error (It's very Urgent)

Hi All,
Personal Data
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
failed to create or init instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN' in scope APPLICATION_SCOPE with instanceId 'null'
Caused by: com.sap.tc.webdynpro.progmodel.model.api.WDModelException: failed to create instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN'
     at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getNewModelInstance(WDModelFactory.java:392)
     at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getOrCreateModelInstanceFromScopeMaintainer(WDModelFactory.java:329)
     ... 65 more
Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: no jcoMetadata found for RFC function 'HRXSS_PER_GET_F4_P0002_IN'! Please verify, that your model is consistent with the ABAP backend: 'EC6'.
Hi Please help me to solve this error it's very urgent ?
thanks and regards,
Phanikumar.

Hi Ashutosh Gulkhobre,
I coppied the dump from the ST22.
Now please tell me solution fro this error ?
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception              CX_SY_REF_IS_INITIAL
Date and Time          27.06.2007 09:54:55
     Short text
          Access via 'NULL' object reference not possible.
     What happened?
          Error in the ABAP Application Program
          The current ABAP program "SAPLHRXSS_PER_MAC" had to be terminated because it
           has
          come across a statement that unfortunately cannot be executed.
     What can you do?
          Note down which actions and inputs caused the error.
          To process the problem further, contact you SAP system
          administrator.
          Using Transaction ST22 for ABAP Dump Analysis, you can look
          at and manage termination messages, and you can also
          keep them for a long time.
     Error analysis
          An exception occurred that is explained in detail below.
          The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
           caught in
          procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
           clause.
          Since the caller of the procedure could not have anticipated that the
          exception would occur, the current program is terminated.
          The reason for the exception is:
          You attempted to use a 'NULL' object reference (points to 'nothing')
          access a component.
          An object reference must point to an object (an instance of a class)
          before it can be used to access components.
          Either the reference was never set or it was set to 'NULL' using the
          CLEAR statement.
     How to correct the error
          Probably the only way to eliminate the error is to correct the program.
          If the error occures in a non-modified SAP program, you may be able to
          find an interim solution in an SAP Note.
          If you have access to SAP Notes, carry out a search with the following
          keywords:
          "OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
          "SAPLHRXSS_PER_MAC" or "LHRXSS_PER_MACU04"
          "HRXSS_PER_CLEANUP"
          If you cannot solve the problem yourself and want to send an error
          notification to SAP, include the following information:
          1. The description of the current problem (short dump)
             To save the description, choose "System->List->Save->Local File
          (Unconverted)".
          2. Corresponding system log
             Display the system log by calling transaction SM21.
             Restrict the time interval to 10 minutes before and five minutes
          after the short dump. Then choose "System->List->Save->Local File
          (Unconverted)".
          3. If the problem occurs in a problem of your own or a modified SAP
          program: The source code of the program
             In the editor, choose "Utilities->More
          Utilities->Upload/Download->Download".
          4. Details about the conditions under which the error occurred or which
          actions and input led to the error.
          The exception must either be prevented, caught within proedure
          "HRXSS_PER_CLEANUP" "(FUNCTION)", or its possible occurrence must be declared
           in the
          RAISING clause of the procedure.
          To prevent the exception, note the following:
     System environment
          SAP-Release 700
          Application server... "ptgsap10"
          Network address...... "192.168.1.18"
          Operating system..... "Windows NT"
          Release.............. "5.2"
          Hardware type........ "2x Intel 80686"
          Character length.... 16 Bits
          Pointer length....... 32 Bits
          Work process number.. 0
          Shortdump setting.... "full"
          Database server... "PTGSAP10"
          Database type..... "ORACLE"
          Database name..... "EC6"
          Database user ID.. "SAPSR3"
          Char.set.... "C"
          SAP kernel....... 700
          created (date)... "Aug 29 2006 00:18:21"
          create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
          Database version. "OCI_10201_SHARE (10.2.0.1.0) "
          Patch level. 75
          Patch text.. " "
          Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
          SAP database version. 700
          Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
          Memory consumption
          Roll.... 8176
          EM...... 2090448
          Heap.... 0
          Page.... 0
          MM Used. 1208256
          MM Free. 880672
     User and Transaction
          Client.............. 001
          User................ "ESS_USER1"
          Language Key........ "E"
          Transaction......... " "
          Program............. "SAPLHRXSS_PER_MAC"
          Screen.............. "SAPMSSY1 3004"
          Screen Line......... 2
          Information on caller of Remote Function Call (RFC):
          System.............. "########"
          Database Release.... 645
          Kernel Release...... 700
          Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
          Call Type........... "synchron and non-transactional (emode 0, imode 0)"
          Inbound TID.........." "
          Inbound Queue Name..." "
          Outbound TID........." "
          Outbound Queue Name.." "
          Client.............. "###"
          User................ "############"
          Transaction......... " "
          Call Program........." "
          Function Module..... "HRXSS_PER_CLEANUP"
          Call Destination.... "ptgsap10_EC6_10"
          Source Server....... "EPSAND1"
          Source IP Address... "192.168.1.36"
          Additional information on RFC logon:
          Trusted Relationship " "
          Logon Return Code... 0
          Trusted Return Code. 0
          Note: For releases < 4.0, information on the RFC caller are often
          only partially available.
     Information on where terminated
          Termination occurred in the ABAP program "SAPLHRXSS_PER_MAC" - in
           "HRXSS_PER_CLEANUP".
          The main program was "SAPMSSY1 ".
          In the source code you have the termination point in line 13
          of the (Include) program "LHRXSS_PER_MACU04".
          The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
          procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", but it was neither handled locally
           nor declared
          in the RAISING clause of its signature.
          The procedure is in program "SAPLHRXSS_PER_MAC "; its source code begins in
           line
          1 of the (Include program "LHRXSS_PER_MACU04 ".
     Source Code Extract
     Line     SourceCde
         1     FUNCTION hrxss_per_cleanup.
         2     *"----
         3     ""Local interface:
         4     *" EXPORTING
         5     *"     VALUE(MESSAGES) TYPE BAPIRETTAB
         6     *"----
         7
         8     * CALL METHOD mac_adapter->cleanup
         9     *    IMPORTING
        10     *      messages = messages.
        11
        12     * TRY.
     >>>>>       CALL METHOD xss_adapter->cleanup
        14         .
        15     * CATCH CX_HRPA_VIOLATED_ASSERTION .
        16     * ENDTRY.
        17       IF NOT xss_adapter2 IS INITIAL.
        18         CALL METHOD xss_adapter2->cleanup.
        19       ENDIF.
        20
        21     ENDFUNCTION.
     Contents of system fields
     Name     Val.
     SY-SUBRC     0
     SY-INDEX     2
     SY-TABIX     13
     SY-DBCNT     30
     SY-FDPOS     0
     SY-LSIND     0
     SY-PAGNO     0
     SY-LINNO     1
     SY-COLNO     1
     SY-PFKEY
     SY-UCOMM
     SY-TITLE     CPIC and RFC Control
     SY-MSGTY
     SY-MSGID
     SY-MSGNO     000
     SY-MSGV1
     SY-MSGV2
     SY-MSGV3
     SY-MSGV4
     SY-MODNO     0
     SY-DATUM     20070627
     SY-UZEIT     095455
     SY-XPROG     SAPLHRXSS_PER_MAC
     SY-XFORM     HRXSS_PER_CLEANUP
     Active Calls/Events
     No.   Ty.          Program                             Include                             Line
           Name
         4 FUNCTION     SAPLHRXSS_PER_MAC                   LHRXSS_PER_MACU04                      13
           HRXSS_PER_CLEANUP
         3 FORM         SAPLHRXSS_PER_MAC                   LHRXSS_PER_MACU04                       1
           HRXSS_PER_CLEANUP
         2 FORM         SAPMSSY1                            SAPMSSY1                               85
           REMOTE_FUNCTION_CALL
         1 MODULE (PBO) SAPMSSY1                            SAPMSSY1                               30
           %_RFC_START
     Chosen variables
     Name
         Val.
     No.          4     Ty.      FUNCTION
     Name      HRXSS_PER_CLEANUP
     MESSAGES
          Table[initial]
     SY-XFORM
          HRXSS_PER_CLEANUP
             455555545544444552222222222222
             82833F052F3C51E500000000000000
             000000000000000000000000000000
             000000000000000000000000000000
     %_DUMMY$$
             2222
             0000
             0000
             0000
     XSS_ADAPTER2
             F0000000
             F0000000
     No.          3     Ty.      FORM
     Name      HRXSS_PER_CLEANUP
     SYST-REPID
          SAPLHRXSS_PER_MAC
             5454455555545544422222222222222222222222
             310C82833F052FD1300000000000000000000000
             0000000000000000000000000000000000000000
             0000000000000000000000000000000000000000
     %_%_MESSAGES
          Table[initial]
     No.          2     Ty.      FORM
     Name      REMOTE_FUNCTION_CALL
     %_DUMMY$$
             2222
             0000
             0000
             0000
     SY-REPID
          SAPMSSY1
             5454555322222222222222222222222222222222
             310D339100000000000000000000000000000000
             0000000000000000000000000000000000000000
             0000000000000000000000000000000000000000
     SYST-REPID
          SAPMSSY1
             5454555322222222222222222222222222222222
             310D339100000000000000000000000000000000
             0000000000000000000000000000000000000000
             0000000000000000000000000000000000000000
     HEADER
             000000000000
             000000000000
     TYPE
          3
             0000
             3000
     SY-XPROG
          SAPLHRXSS_PER_MAC
             5454455555545544422222222222222222222222
             310C82833F052FD1300000000000000000000000
             0000000000000000000000000000000000000000
             0000000000000000000000000000000000000000
     %_ARCHIVE
             2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
             0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
             0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
             0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
     RC
          0
             0000
             0000
     SY-XFORM
          HRXSS_PER_CLEANUP
             455555545544444552222222222222
             82833F052F3C51E500000000000000
             000000000000000000000000000000
             000000000000000000000000000000
     %_SPACE
             2
             0
             0
             0
     No.          1     Ty.      MODULE (PBO)
     Name      %_RFC_START
     %_PRINT
              000                                                                                0###
             2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
             0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
             0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
             0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
     RFCTYPE_INTERNAL
          3
             0000
             3000
     Internal notes
          The termination was triggered in function "method_call_iref"
          of the SAP kernel, in line 2203 of the module
           "//bas/700_REL/src/krn/runt/abmethod.c#7".
          The internal operation just processed is "METH".
          Internal mode was started at 20070627095455.
     Active Calls in SAP Kernel
     Lines of C Stack in Kernel (Structure Differs on Each Platform)
     SAP (R) - R/3(TM) Callstack, Version 1.0
     Copyright (C) SAP AG. All rights reserved.
     Callstack without Exception:
     App       : disp+work.EXE (pid=24080)
     When      : 6/27/2007 9:54:55.565
     Threads   : 2
     Computer Name       : PTGSAP10
     User Name           : SAPServiceEC6
     Number of Processors: 2
     Processor Type: x86 Family 6 Model 11 Stepping 1
     Windows Version     : 5.2 Current Build: 3790
     State Dump for Thread Id 6cd0
     eax=000a7358 ebx=00000464 ecx=00000248 edx=00000000 esi=00000464 edi=00000000
     eip=7c82ed54 esp=0549c640 ebp=0549c6b0 iopl=0         nv up ei ng nz ac po cy
     cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000             efl=00200297
     function : KiFastSystemCallRet
             7c82ed54 c3               ret
             7c82ed55 8da42400000000   lea     esp,[esp]              ss:0549c640=7c822124
             7c82ed5c 8d642400         lea     esp,[esp]              ss:27f2ac53=????????
     FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
     0549c6b0 77e6ba12 00000464 0001d4c0 00000000 0549c6e8 ntdll!KiFastSystemCallRet
     0549c6c4 0101f939 00000464 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
     0549c6e8 005641c2 005641fb 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess [ntstcdbg.c (501)]
     0549c6ec 005641fb 7c38b5c8 7c38b5c8 7c38b5c8 01d87888 disp+work!NTStack [dptstack.c (1367)]
     0549c708 0056422f 7c38b5c8 00000000 0085f2b9 7c38b5c8 disp+work!CTrcStack2 [dptstack.c (352)]
     0549c714 0085f2b9 7c38b5c8 00000000 005f0059 00300030 disp+work!CTrcStack [dptstack.c (182)]
     0549c738 008626fb 3ccf0c10 00008006 00000000 00660bd8 disp+work!rabax_CStackSave [abrabax.c (7020)
     0549cfe0 0067f9fc 01285324 012852e4 0000089b 2054de20 disp+work!ab_rabax [abrabax.c (1243)]
     0549d010 006914a8 00000003 3cda5308 00000000 0549d078 disp+work!method_call_iref [abmethod.c (2203
     0549d078 007c8d1e 00000000 3cda5308 0549d1c4 3cda67e8 disp+work!ab_extri [abextri.c (552)]
     0549d08c 008433d6 00000000 3cda6768 0059fdb0 3cda64b4 disp+work!ab_xevent [abrunt1.c (281)]
     0549d098 0059fdb0 3cda64b4 00000008 3cda6768 00000000 disp+work!ab_dstep [abdynpro.c (491)]
     0549d1c4 005a2ae2 3cda5308 3cda5308 0549fd04 005a2654 disp+work!dynpmcal [dymainstp.c (2394)]
     0549d1d4 005a2654 3cda5308 3cda5308 00000003 0549fd04 disp+work!dynppbo0 [dymainstp.c (542)]
     0549d1f0 00577116 3cda5308 00000004 00000000 0000001a disp+work!dynprctl [dymainstp.c (359)]
     0549fd04 004741c6 0000001a 00000001 00000001 0049792f disp+work!dynpen00 [dymain.c (1464)]
     0549fd14 0049792f 00000004 00000000 00000003 00000002 disp+work!Thdynpen00 [thxxhead.c (4683)]
     0549fee0 00497ead 00000001 00000000 00000000 00430000 disp+work!TskhLoop [thxxhead.c (4395)]
     0549ff00 004214f1 00000000 00000000 7ffd5000 0549ff60 disp+work!ThStart [thxxhead.c (1153)]
     0549ff14 00401080 00000003 056368d8 00000001 00000000 disp+work!DpMain [dpxxdisp.c (1119)]
     0549ff60 011bf720 00000003 056368d8 056378c8 01c05000 disp+work!nlsui_main [thxxanf.c (82)]
     0549ffc0 77e523cd 00000000 00000000 7ffd5000 80938fd6 disp+work!wmainCRTStartup [crtexe.c (395)]
     0549fff0 00000000 011bf5dd 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
     State Dump for Thread Id 6408
     eax=00000001 ebx=00000103 ecx=0770fee8 edx=7c82ed54 esi=00000000 edi=00000000
     eip=7c82ed54 esp=0770fec0 ebp=0770ff04 iopl=0         nv up ei pl zr na po nc
     cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000             efl=00000246
     function : KiFastSystemCallRet
             7c82ed54 c3               ret
             7c82ed55 8da42400000000   lea     esp,[esp]              ss:0770fec0=7c821514
             7c82ed5c 8d642400         lea     esp,[esp]              ss:2a19e4d3=????????
     FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
     0770ff04 0110e0b7 000006e0 00000000 00000000 059ca9d8 ntdll!KiFastSystemCallRet
     0770ff84 7c349565 00000000 00000000 00000000 0563a508 disp+work!SigIMsgFunc [signt.c (594)]
     0770ffb8 77e66063 0563a508 00000000 00000000 0563a508 MSVCR71!endthreadex
     0770ffec 00000000 7c3494f6 0563a508 00000000 00000000 kernel32!GetModuleFileNameA
     List of ABAP programs affected
     Index     Typ     Program     Group     Date     Time     Size     Lang.
          0     Prg     SAPMSSY1          0     11.04.2005     09:27:15         21504     E
          1     Prg     SAPLHRXSS_SER_AUTHORITHY_CHECK          1     13.02.2005     19:00:30         16384     E
          2     Prg     SAPLASTAT_TRIG          2     09.09.2004     14:18:33         13312     E
          3     Typ     ASTAT_TYP2          0     10.11.1998     05:35:18          2048
          4     Typ     ASTAT_TYP1          0     30.11.1998     15:54:16          2048
          5     Prg     SAPLSAUTHTRACE          5     07.03.2005     08:51:05         57344     E
          6     Typ     USOBHASH          0     02.07.2003     13:15:24          3072
          7     Prg     SAPLSECH          7     05.07.2005     13:10:18         26624     E
          8     Typ     CVERS          0     09.11.2000     14:05:49          2048
          9     Prg     SAPLHRXSS_PER_MAC          9     10.02.2004     14:21:15         49152     E
         10     Prg     CX_SY_REF_IS_INITIAL==========CP         10     05.07.2005     13:10:16         10240     E
         11     Typ     SCX_SRCPOS          0     18.05.2004     14:07:11          2048
         12     Prg     CX_DYNAMIC_CHECK==============CP         12     05.07.2005     13:10:16         10240     E
         13     Prg     CX_ROOT=======================CP         13     05.07.2005     13:10:16         11264     E
         14     Prg     CX_NO_CHECK===================CP         14     05.07.2005     13:10:16         10240     E
         15     Prg     CX_SY_NO_HANDLER==============CP         15     05.07.2005     13:10:16         10240     E
         16     Typ     SYST          0     09.09.2004     14:18:12         31744
     Directory of Application Tables
     Name                                     Date       Time       Lngth
         Val.
     Program      SAPMSSY1
     SYST            . .            : :          00004612
          \0\0\0\0\x000D\0\x000F\0\0\0\0\0\0\0\0\0\0\0\0\0\x001E\0\0
     ABAP Control Blocks (CONT)
     Index     Name     Fl     PAR0     PAR1     PAR2     PAR3     PAR4     PAR5     PAR6     Source Code     Line
       246     FUNC     03     0020                                   LHRXSS_PER_MACU03            1
       247     PAR2     02     0000     001B     C000                         LHRXSS_PER_MACU03            1
       249     FUNC     13     0003                                   LHRXSS_PER_MACU03            1
       250     PAR2     01     0000     0011     C001                         LHRXSS_PER_MACU03            1
       252     FUNC     FF     0000                                   LHRXSS_PER_MACU03            1
       253     ENDF     00     0000                                   LHRXSS_PER_MACU03            1
       254     -
     00     0000                                   LHRXSS_PER_MACU03            1
       255     STCK     02     C001                                   LHRXSS_PER_MACU03            1
       256     CPOP     00     0000                                   LHRXSS_PER_MACU03            1
       257     -
     00     0000                                   LHRXSS_PER_MACU03            1
       258     FUNP     3E     0000     0011     8000     0000     8000     0000     0000     LHRXSS_PER_MACU04            1
       262     FUNP     80     0000     0000     0000     0000     0000     0000     0000     LHRXSS_PER_MACU04            1
     >>>>>     METH     03     0000     0000     8006     0000     0000     0000     0000     LHRXSS_PER_MACU04           13
       270     PAR2     00     0000     0001     0000                         LHRXSS_PER_MACU04           13
       272     CMPS     20     024B     001B     001B                         LHRXSS_PER_MACU04           17
       274     BRAF     05     0007                                   LHRXSS_PER_MACU04           17
       275     METH     03     0000     0001     8006     0000     0000     0000     0000     LHRXSS_PER_MACU04           18
       279     PAR2     00     0000     0001     0000                         LHRXSS_PER_MACU04           18
       281     FUNE     00     0000                                   LHRXSS_PER_MACU04           21
       282     -
     00     0000                                   LHRXSS_PER_MACU04           21
Thanks and Regards,
Phanikumar

Change in material prices- very urgent

Dear Gurus
We have a very urgent issue to be resolved,
we have a situation where in we are finding a huge difference in the inventories posted in SAP to that of the legacy data for a particular month(JUNE) these inventories where first initially uploaded according to the data given by the client.
But the client has later realised that the price given for the materials was including Excise Duties, thats the reason there is a huge difference in the inventories.
The MM period for June was closed and july was opened, then the client wanted us to change the prices to the original rates that is without ED. so we have run MR21 as on 1st of july. even then the changed prices where not seen in Material
master.
Now the client is insisting on getiing the JUNE inventories exactly matching with legacy.
Note: The july transactions are already running online i.e all PO's have been closed for JULY but the PRoduction orders are still in pending.
In this kind of situation how can we get those inventories back correctly(for JUNE month).
Solution will definately be rewarded.
Thank you in advance
kavitha

If GRs have been done for POs already in July, you should not change the prices for June.
In such a scenario, one option is to have stock accounts with Credit balances (a purely FI entry) which will bring the value of the inventory down in the books.
Another option is to calculate the value manually for each material - i.e. the correct value (uploaded) and the PO Prices and do an MR21 to correct the stock value. This is the ideal solution but may not be practical to implement.
Hope this helps,
Lakshman

ORA-04062 - very urgent, please help

Error "ORA-04062: timestamp of package "SYS.DBMS_SNAPSHOT_UTL" has been changed" appears while refreshing materialized view with DBMS_MVIEW.REFRESH, the configuration is described below, please, any suggestions what cause the problem?
I have the master database:
db_master
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
and replica database:
db_replica
Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
the master and replica databases are installed at different hosts
At db_master:
1. I create table TEST
CREATE TABLE TEST (ID NUMBER PRIMARY KEY);
2.Then create materialized view log on TEST
CREATE MATERIALIZED VIEW LOG ON TEST;
At db_replica:
1. create dblink MASTER to db_master
2. create materialized view
CREATE MATERIALIZED VIEW MV_TEST REFRESH FAST AS SELECT * FROM TEST@MASTER
At db_master:
1.Insert some test values to TEST
INSERT INTO TEST VALUES (1);
INSERT INTO TEST VALUES (2);
INSERT INTO TEST VALUES (3);
COMMIT;
At db_replica:
1. call in job (every 10 sec) DBMS_MVIEW.REFRESH(‘MV_TEST’), or manually:
begin
DBMS_MVIEW.REFRESH('MV_TEST');
end;
sometimes (not at every call the below error callstack appears)
17:07:22 ORA-04062: timestamp of package "SYS.DBMS_SNAPSHOT_UTL" has been changed
17:07:22 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2254
17:07:22 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2460
17:07:22 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2429
17:07:22 ORA-06512: at line 4
Please, help me solve this problem, what cause ORA-04062?

Zjawka,
This forum doesn't consist of paid support personell.
Labeling your request as 'very urgent' must be considered rude.
If you would have looked up the error at all in the online documentation,
you would have got:
ORA-04062: %s of string has been changed
Cause: Attempt to execute a stored procedure to serve an RPC stub which specifies a timestamp or signature that is different from the current timestamp/signature of the procedure.
Action: Recompile the caller in order to pick up the new timestamp.
No why do you do take the trouble to dump all in this junk in a volunteer forum, and you can't be bothered to look up the error message?
Sybrand Bakker
Senior Oracle DBA

Badi's on vi01. Pls Its very urgent

Hi Experts,
      I have given the requirement below I am not aware of badi's. Pls tell me the info about Business event 1120P. And also post the coding for this functionality . Its very urgent
Enhancement Summary
Two user exits are needed to determine the correct G/L Account and Cost Center on Shipment Cost documents and post the Material Group on the Accounting document. BADI_SCD_ACCTG and Business Event 1120P can be used to accommodate the new functionality.
Business Process
Specific G/L Accounts and Cost Centers have to be determined to post on the Shipment Cost document. This is needed to provide accurate management reporting capabilities on shipments for Sales Order or Stock Transfer Order. A new custom table must be created which contains the following information: Distribution, Mode of Transport, Account, Cost Center Material group. Distribution is an identifier here if this shipment originated from an SO or STO.
There are no screens involved in this enhancement.
Components
Table: ZTABLE1
Field     Data Element     Type     Length     Description
MANDT     MANDT     CLNT (key)     3     Client
DISTRIBUTION     Z_DISTRIBUTION     CHAR (key)     1     Distribution
MOT     ZZDEF_MOT     CHAR (key)     2     Mode of Transportation
MATKL     MATKL     CHAR (key)     9     Material group
SAKNR     SAKNR     CHAR     10     G/L Account Number
KOSTL     KOSTL     CHAR     10     Cost Center
This table gets updated manually by the FI team.
Values for Distribution are:
1 = Primary Distribution to Refinery
2 = Primary and Secondary Excluding refinery
All entries must be checked against SAP config and master tables
User exit BADI BADI_SCD_ACCTG will be used to determine the correct G/L Account, Cost Center and Product Group based on Distribution and Mode of Transport. This BADI gets called only when a new Shipment Cost document get created.
Once the BADI determined the new values it populates field c_vfkn-sakto with the G/L account, field c_vfkn-kostl with the Cost Center and exports the Product group to memory.
There is no field on the Shipment Cost Document to store the Product group. Therefore another mechanism must be used to get the Product Group on the accounting document.
Business Event 1120P can be used to import the Product group out of memory and put it on BSEG-MATNR. Structure BSEG_SUBST must be enhanced with field MATNR for this purpose.
Function, Rules, Exits      Description of Functionality, Rules, Exits
BADI_SCD_ACCTG     Business Add-In for Shipment Cost Account Assignment
Business Framework     Business Event 1120P can be used to import the Product Group from memory and to populate field BSEG_SUBST-MATNR.
This event gets called from different places. It needs to be ensured that it only populates the value when it was called from BADI_SCD_ACCTG.
Custom Table     A look-up Table needs to be maintained for Distribution, Mode of Transport, G/L Account, Cost Center and Material Group
Transaction code     To maintain the new table
Append Structure     To enhance structure BSEG_SUBST with MATNR
      Business Add-In BADI_SCD_ACCTG can be used to determine the account assignments for a shipment cost item to set the G/L Account and Cost Center. All data needed to determine the new information gets provided in this BADI.
Logic:
     Determine if STO or SO based on Document Category from internal table I_REFOBJ-VTRLP field VGTYP If is C then Distribution type is Sales Order (Primary and Secondary Excluding Refinery 2 ) else we need to check the receiving plant. If the receiving plant (I_REFOBJ-VTRLK field WERKS) is a refinery the Distribution type is Primary (1) else its a (Primary and Secondary Excluding Refinery 2 ). Refineries can be identified via Function Module Z_M_GET_PLANTCLASSIFICATION. The plant must be passed into Import Parameter IP_SAPPLANT and field INT_PLANTCHAR-ATNAM must be looked up with value SAPTYPE. If it exists and field ATWRT contains RFY, the plant is a refinery.
     Product Group can be determined from the Material master through Material group field MARA-MATKL.
     Mode of Transport will be passed in the BADI in VTRLK-OIC_MOT.
     Select single entry from table ZTABLE1based on Distribution, Mode of Transport and Material Group. If nothing gets selected, error message No entry exists in table ZTABLE1for Distribution (distribution), MOT (MOT) & Mat. Group (material group) should be triggered.
     Move ZTABLE1-SAKNR to c_vfkn-sakto and ZTABLE1-KOSTL to c_vfkn-kostl
     The Material group must be exported to memory in BADI_SCD_ACCTG
     The Material group must be imported from memory in Business Event BP1120P
     Free Memory in Business Event BP1120P
This is VI01 Creation of Freight Cost Item screen

check the reply of ur Same Post .
regards
prabhu

DUMP in the MFBF transaction

Hi Folks,
Users getting the frequent dumps in production systems. actaully we observed that dumps are coming when the users accessing the MFBF transaction manually when the batch job was running for backflush and NRIV (number ranges) table is getting locked.
The dump details is:
ABAP/4 runtime error   DBIF_RSQL_SQL_ERROR
       Occurred on     16.04.2007 at 15:57:10
>> Short dump has not been completely stored. It is too big.
SQL error 60 occurred when accessing table "NRIV ".
What happened?
The database system detected a deadlock and avoided it by rolling back
your transaction.
Information on where termination occurred
The termination occurred in the ABAP/4 program "SAPLSNR3" in
"READ_NRIV".
The main program was "SAPLBARM".
The termination occurred in line 231
of the source code of program "LSNR3F01" (when calling the editor 2310).
The error occurred during batch input processing
Source code extract
002010             NRIV-TOYEAR    = BNRIV-TOYEAR.
002020             G_FOUND        = YES.
002030           WHEN 4.
002040           WHEN OTHERS.
002050             G_ERROR_IN_BUFFER = YES.
002060         ENDCASE.
002070       ENDIF.
002080
002090       IF BUFFER_ACTIVE = NO OR G_ERROR_IN_BUFFER = YES.
002100   *          Die Pufferversion ist nicht aktiv oder es wurde bereits
002110   *          ein Fehler im Puffer oder NrKreisServer festgestellt.
002120   *          Gⁿltiges NrKreisIntervall mit Bis-GeschΣftsjahr aus der
002130   *          DB ermitteln
002140   *
002150         SELECT * FROM NRIV WHERE OBJECT    = P_OBJECT
002160                              AND SUBOBJECT = P_SUBOBJECT
002170                              AND NRRANGENR = P_NR_RANGE_NR
002180                              AND TOYEAR   >= P_TOYEAR
002190                       ORDER BY PRIMARY KEY.
002200           G_FOUND = YES.
002210           EXIT.
002220         ENDSELECT.
002230       ENDIF.
002240
002250       IF G_FOUND = YES.
002260   *          Intervall lesen, um zu sperren
002270         SELECT SINGLE FOR UPDATE * FROM NRIV WHERE
002280                                     OBJECT    = NRIV-OBJECT
002290                                 AND SUBOBJECT = NRIV-SUBOBJECT
002300                                 AND NRRANGENR = NRIV-NRRANGENR
>                                 AND TOYEAR    = NRIV-TOYEAR.
002320         IF SY-SUBRC <> 0.
002330       MESSAGE E751 RAISING INTERVAL_NOT_FOUND WITH P_OBJECT
002340                                                    P_NR_RANGE_NR.
002350         ENDIF.
002360       ELSE.
002370       MESSAGE E751 RAISING INTERVAL_NOT_FOUND WITH P_OBJECT
002380                                                    P_NR_RANGE_NR.
002390       ENDIF.
002400     ENDIF.
002410
002420     IF NRIV-EXTERNIND <> SPACE.
002430       MESSAGE E752 RAISING NUMBER_RANGE_NOT_INTERN.
002440     ENDIF.
002450
002460   *    LΣnge (maximale Anzahl Stellen) der Nummern berechnen
002470     G_NR_LENGTH = STRLEN( NRIV-FROMNUMBER ).
002480
002490   *    Nummern in numerische Felder fⁿr spΣtere Berechnungen ⁿbernehmen
002500     ASSIGN NRIV-FROMNUMBER(G_NR_LENGTH) TO <G_F>.
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0                             SY-INDEX 1
SY-TABIX 1                             SY-DBCNT 1
SY-FDPOS 32                            SY-LSIND 0
SY-PAGNO 0                             SY-LINNO 1
SY-COLNO 1
Chosen variables
Any help will get full points.
Regards
TAJUDDIN

Dear All,
Notes are available for 4.6c version. This problem is in 3.1i and for this there is no note. Can we modify this 4.6c note and use in 3.1?
Regards
TAJUDDIN

VERY URGENT.... DUMP IN PRODUCTION STOPPED TRANSACTION .

Similar Messages

Maybe you are looking for