Very Urgent Extn.Material Group and Material Group.

Hi Guru's,
      I was created Generic D.S Using table (AFRU) for Orders Confirmation.I was Created Info Source AND ODS.
     I nedd to maitain ODS Extn.Material Group and Material Group.but These fields are not Avilable in Data Source (AFRU Table not having).
    Data source having Field AUFNR (order number) I was mapped To BW Object 0prodorder. I was maitained master data for 0prodorder.
  0prodorder master data (0prodorder_attr) having 0material (PLNBEZ Field mapeed to 0material) as a navigational Attribute.
i am asking to all is it possible to bring Extn.Material Group and Material Group update rule level using master data attribute option?
Please help to me Above issue.it's very urgent.
Thanks & Regards,
Guna.

Hi Manju & Gopi,
    This Order Confirmations cube having data from 2 data sources.
    There is a performence issue to clubbing so many tables.
     Any way i was maitained 0material is attribute(Nav Attr) of 0proorder.i was loaded 0prodoreder master data.
   0material having master data .Extn mat group & Material group are Nav Attributes of 0material.
  Now is it possible to maitaining the data in cube Extn mat group & Material group ?
Please Give me Suggestion with out adding another table using view.
Thanks & Regards,
Guna.

Similar Messages

  • Filtering R/3 Material Groups and Material Types

    Hi,
    I am trying to filter the Material groups and material types during master data upload from R/3 to SRM 4.0
    I am tried doing the following:
    1. In Txn R2AR2, i set up the request for DNL_CUST_PROD1 for MARA-MATKL(Material Group) & MARA-MTART(Material Type)and then run the Txn R3AR4 with DNL_CUST_PROD1. The replication was successful, but it pulled in all the R/3 backend material groups and material types.
    Now i deleted the replicated material types and Material groups in SRM using SRM Std reports and this too was successful.
    2. Now i tried another method - In Txn R3AC3, i selected the Object DNL_CUST_PROD1 and i added table MARA and set up the filter requirements for MARA-MTART(Material Types) and MARA-MATKL(Material Groups), i synchronized the filters and then when i selected the object DNL_CUST_PROD1 in Txn R3AS for initial upload, even this is pulling in all the material types and material groups from R/3 without filtering
    Can anyone please let me know the exact procedure to filter out the R/3 Material types and material groups during initial upload of this data into SRM 4.0
    Thanks

    Hi,
      Before starting the INitial load for MATERIAL,for filetr settings ,Go in tcode R3AC1.
      There select the Object name as MATERIAL and click on the "filter settings" tab.
    There in OBJECT FILTER SETTINGS
    Enter the relevant filter criteria:
    e.g. If you wnat to filter on Material type(MARA-MTART):
    The input will be as follows:
    Table /Structure :MARA
    Field :MTART
    OP :EQ Equality (= Low)
    Low: "Material type name"
    Incl/EXcl: Inclusive defined   
    And then click on the button "FILTER SYNC".
    The filter settings are complete for the Material download.
    HTH,
    BR,
    Disha.
    Pls reward points for helpful answers.

  • Description of material group and material type

    hi,
    i want to know which are the tables for the description of material group and material type.
    Edited by: Alvaro Tejada Galindo on Apr 2, 2008 3:49 PM

    table name :MARA
    Field name:
    Material group:MATKL
    for Material description
    Table name :MAKT
    fieldname:MAKTX
    Rewards plz..........

  • Creation of new employee groups and sub groups

    Hi All,
    What all the steps should I follow to create new employee groups and sub groups? and  How many structures should I create for this?
    Its urgent pls.......
    Good replies will be rewarded!!!!
    Regards,
    Sita

    Hi
    You can create the employee groups depending up on your clients requirement, Eg: Permanent, Temporary, Seasonal, Trainee, Advisor etc
    And define the employee subgroups and assign them to the employee groups Like
    Enterprise structure>Definition>Human Resource Management-->Employee Groups & Employee Groups
    Enterprise structure>Assignment>Human Resource Management-->Assign employee subgroup to employee group
    you can create employee subgroups depending up on your requirement like asst manager, manager, GM, MD, VP ETC an assign them to the employee subgroups ok.
    Ensure that certain empployee subgroups may not be assigned to employee group based on requiremen, but create all the employee sub groups which is existing in the organization.
    Regards

  • Primary Group and Additional Group in Solaris 10

    hi!
    We've just freshly installed a Solaris 10 system. I'm very new in Solaris. There's something i noticed, and i'm not sure whether is that normal.
    In the user screen in solaris management console, i notice that i'm not able to see the Primary group and additonal group list. What i can see is only the Primary group in ID format. I'm able to see it only the first time when i launch the Solaris management console or switch from one workplace to another. After right clicking on the user properties for the second time, it disappear and show only the primary group id in integer. On the left hand side of the screen, it says "The group cannot be listed. You can change the primary group 10 to another valid integer. Because of error or oversight, group membership cannot be found. You can enter a number for the primary group, but cannot choose from a list of groupnames. Also you cannot choose Seconday Group until the group info is available". "Check group files, NIS maps, or load for possible corruption. If you have not already populated appropiate files or maps, See administrator guide, Naming and Directory Services(DNS, NIS, LDAP) or docs.sun.com for LDAP see also Solaris Management console help, about the toolbox editor to manage LDAP"
    Is that normal? What could be wrong here? Please advise. Thanks.

    hi! Anyone can provide advise on the issue i encountered?

  • A report for MM where basic list will contain the material no and material

    how to develop a report for MM where basic list will contain the material no and material description for the range of material no chosen by user. ...plz help me...how to do this step by step..

    Hi Raja,
    Firstly declare a select-option for material number.
    write a select query specifying the required field and specify a where clause
    as
    WHERE MATNR IN S_MATNR.
    Obviously you will select the records into internal table and so loop that internal table and display the records...
    The records will be displayed on the basic list.
    Hope this will solve your problem.
    Regards,
    Narin Nandivada

  • Change employee group and sub group

    Hi all,
    During the new hire if an employees group and subgroup are enetered wrongly, how shouldl they be corrected. We have scenarios when the emplooyes group and sub group are corrected after a month or so and the users want to correct the same
    How do we do it?

    Goto PA40 reselect the same Hire action for this employee and click execute. In IT0000 screen enter the new EG/ESG.
    and save it. Then Save the IT0001, then fill rest of the infotypes.
    If you have already process the payroll and the new Emp group / Sub group is in different payroll area you wont be able to change it.

  • Default excise group and series group issue

    Hi Gurus
    I have a doubt. Is it possible to maintain the default excise group and series group in this order
    sales org     dis chnl    division    ship pt    plant    excise group    series group
    1000               EX         CD             1000     1000       10                       A1
    1000               EX         CD             1000     2000       20                       A2
    i tried this combination, but getting the error message that a key already exists....The header data sales area and shipping point already exists.... I cant understand why we cant give the same sales area and shipping point for a new plant combination
    Thanks in advance
    Mathan

    Hi Mathan,
    When we say Excise group then it is maintained for the plant as it is maintained with Excise authorities. We can have same shipping point for 2 different plants but the possibilities are less and when 2 plants share the resources and facilities then those plants are registered as a single excise entity with the authorities. That is the reason that the option of having the same sales area and shipping point as header data is not allowed for more than one excise group. This is more business related than SAP.
    Hope this clarifies the doubt.
    Regards,
    Antima

  • Singapore - Employee Group and Sub groups

    Hi Gurus
    While making employee groups and sub group for SG what factors should one keeep in mind??

    Hi,
    When we are assigning the employee groups to sub groups select 25 singapore country allowed in the table V_T503Z.
    that factor we need to remember.
    Good luck
    Devi

  • Valuation Group and Tolerance Group - FS00

    Hi all,
    Can someone please tell me what the field 'valuation group' and 'tolerance group' are used for? I've found a brief description online, but if you could provide me with an example that would be great.
    thanks,

    Hi
    We will use Tolerance group for below mentioned activities
    the maximum document amount the employee is authorized to post
    the maximum amount the employee can enter as a line item in a customer or vendor account
    the maximum cash discount percentage the employee can grant in a line item
    the maximum acceptable tolerance for payment differences for the employee
    For Valuation Group suggest you to refer below links
    Valuation group code in Account determination?
    Regards
    Praveen

  • What is meant by article grouping and site grouping and how to define

    what is meant by article grouping and site grouping and how to define in SAP.

    Hi Charan,
               Article Grouping in its broader sense  means grouping of Articles for ease of maintenance and business functions, either on the basis of Hierarchy or on the basis of Merchandise Category.Article Grouping is also primarily useful in promotions,wherein you can define a set of articles(which may not necessary fall under the same MC or Hierarchy) and club them together and assign them in a promotion.Txn codes used are : VBG1/2/3 - Create/Change/Display Article Group
    For more information refer the link below
    http://help.sap.com/saphelp_47x200/helpdata/en/12/08485c470311d1894a0000e8323352/frameset.htm
    Site Grouping is used for ease of maintenance by grouping the sites.It is also used to maintain the characteristics as well.This can also be used in Allocation Tables,promotion and Listing etc
    Some of the Txn codes -
    WB50 - Site Group,Create Alloc,.table
    Wb56 - Site Group, Alloc.table,Maintain Sites in Class
    WB60 - Site Group,Create Promotions
    WB64 - Site Group,Maintain SItes to Class
    Wb80 - Create Site Group Other
    For more information,refer the link below
    http://help.sap.com/saphelp_47x200/helpdata/en/12/08485c470311d1894a0000e8323352/frameset.htm
    Hope it helps
    Rgds,
    Aram K.
    For more information refer to the link below

  • Relation between Material Number and Material document Number.

    hi xperts,
         I want to Know Is there any Relation ship between the <b>Material Number</b> and <b>Material Document Number</b>.
      If So can i get any Tcodes to check them?
    Thanks in advance.
    Message was edited by:
            STALIN JOSEPH

    Hi,
      Thanks for your reply.
    I want to Load the Inventory Management Data into Business warehouse ,there the Only way i correlate the Data between is by taking some material Number.
    and Material Document.
    In step 1 i load Material Number data and step 2 i load material document data,so i want to make cure those two loads i load the same material numbers.
    Please help me to collerate between them.

  • FM to get Material Charecterstis  and Material Charecterstiscs of Material

    Hi Experts.
    do we have any funtion module for getting the Material Charecterstis and Material Charecterstiscs values for a metrial..
    Ex: Input = Material : JDMPPLUS
          output = class:                      WTY_MAINT_PLAN
                       Charecterstic value : JDCSP
    Thanks

    Hi,
         Try this FM CLAF_CLASSIFICATION_OF_OBJECTS
    CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
          EXPORTING
    *     CLASS                      = ' '
    *     CLASSTEXT                  = 'X'
            classtype                  = w_klart    " Material class
    *     CLINT                      = 0
    *     FEATURES                   = 'X'
    *     LANGUAGE                   = SY-LANGU
            object                     = w_matnr    "Material
    *     OBJECTTABLE                = ' '
    *     KEY_DATE                   = SY-DATUM
    *     INITIAL_CHARACT            = 'X'
    *     NO_VALUE_DESCRIPT          =
    *     CHANGE_SERVICE_CLF         = 'X'
    *     INHERITED_CHAR             = ' '
    *     CHANGE_NUMBER              = ' '
          TABLES
            t_class                    = wa_sclass
            t_objectdata               = wa_clobjdat      
    *     I_SEL_CHARACTERISTIC       =
    *     T_NO_AUTH_CHARACT          =
    EXCEPTIONS
       no_classification          = 1
       no_classtypes              = 2
       invalid_class_type         = 3
       OTHERS                     = 4
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
    Regards
    Bala Krishna

  • Customer group and price group mapping

    Hi All ,
    I want to know where do we set the mapping for the customer group versus price group in the system .
    Is there any customizing t-code for this?
    Please advice.
    Thanks in advance,
    Swati

    Dear Swathi,
    There is no T-Code for Setting Customer Group and Pricing gorup in Customizing
    But we assign generally this two in front end due to requirements,
    like we consider in this two in Pricing condition creation in VK11, here suppose we maintain Key Combination in Customer Group and Pricing Group then we consider
    Hope this may helps you
    Prem.

  • Difference between Material Master and Material ledger

    Can anyone tell me the difference if any between Material Master and Material ledger and its usage and interlink with SAP modules.
    Thanks for your time
    suresh arya

    Hi Suresh,
    The application component Actual Costing/Material Ledger fulfills two basic objectives: The ability to carry material prices in multiple currencies/valuations, and actual costing.
    The material master records are all information your company needs to manage a material is stored in a data record in the material aster, sorted by various different criteria.
    For more information regarding the functionality, you can see in path below, help SAP...
    Material Master data:
    http://help.sap.com/saphelp_47x200/helpdata/en/03/abb8f85fbe11d396a600a0c930e0da/frameset.htm....
    Material ledger:
    http://help.sap.com/saphelp_47x200/helpdata/en/a2/5cd63835e211d38a710000e83234f3/frameset.htm..
    Regards,
    Paulo

Maybe you are looking for

  • How to get Outlook 2010+ to connect up externally using Outlook Anywhere (EXCH2013)?

    I have a on-premise EXCH2010 / EXCH2013 deployment and I would like to allow our users to be able to access their email using their domain joined and non-domain joined (workgroup) laptop/outlook. The clients are running Outlook 2010 and/or Outlook 20

  • How do you create sprite reference in javascript format?

    I am a flash developer who is new to director. I am using java script syntax. I have done a bit of looking around with no luck, I assume I am missing something obvious. I declare a global array and try to add sprite references to it. Basically like I

  • How to obtain the value at the end of quarter

    Hi, I am new to CR2008. I need to obtain the value of a particular field (say inventoryEndValue) at the end of each quarter, and use it as the starting value (say inventoryStartValue) for the next quarter. I want to show these values (the end value o

  • Airport Express and Audio

    I'm new to Macs and Airport but so apologies for my ignorance... but I want to know is it possible to send all audio to my airport express connected speakers or can it only be done with itunes. At the moment i have my speakers connected to my airport

  • How to see decimal part of float value?

    How to see only value of decimal part of float value? For example, if I have 1.455, i need only to see .455 part.