VGA adapter works with my iPad3 but not my iPhone4

I just purchased a VGA Adapter from Apple. It seems to work fine when connected to my iPad3 but I have been unable to get it to work with my iPhone4. The monitor shows a 1024x768 signal is being received but the iPhone screen does not appear on the monitor. Is there something I need to configure to get the iPhone4 to project an image on the VGA monitor?

Iphone4 dont support mirror so only when Apps which support av out is used Will it display out of the vga port

Similar Messages

Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

It's a VGA adapter. Nothing special about that. If your Samsung monitor supports VGA then it will work.
But why not go completely digital and use a Mini DisplayPort to HDMI adapter to skip the analog conversion? It also supports passing audio over HDMI.
About Mini DisplayPort to HDMI adapters

Will the mini display port to vga adapter work with a 2007 mac book?

will the mini display port to vga adapter work with a 2007 mac book?

I think your Macbook came with a Mini DVI port instead of a Mini Display port.

Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.

I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter). Already attempted: 1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.2) Close (from taskmgr) anything that looks like it might use Webcam. 3) Run Skype for Desktop in Windows 7 and 8 compatibility modes None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam". I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it Thanks, - Matt Symes

OK - I appear to have resolved the issue. I restricted my google terms to [vx-7000 site:microsoft.com "windows 8.1"] Which uncovered this article: http://support.microsoft.com/kb/933311 I noticed there were a couple of Windows 7 x64 specific registry settings that were mentioned so I checked these and they weren't as per the article. In fact - one of the Registry Keys was already used by other software "AI Charger+" which is some ValueAdd software that came with my motherboard. I uninstalled AI Charger+, uninstalled LifeCam driver. Reinstalled LifeCam driver in Windows 7 compatibility mode. Still not working. I returned to the registry and noticed the settings still differed from the above article. I corrected them (which involved not just amending Data but having to add new Values). I then disabled and reenabled the LifeCam from dvcmgmt.msc I was then able to get video from the webcam in the Skype for Desktop preview screen.

Isight works with photo booth but not in ichat or google talk or skype?

isight works with photo booth but not in ichat or google talk or skype?

Hi
Is this an Internal or External iSight ?
In iChat, in the Video Menu (This is to the right of Buddies and may read Audio) is Camera Enabled Ticked ?
If it reads Audio open the Connection Doctor from that same menu.
In the connection Doctor open the Capabilities tab
Does it say your Internet Connection is too slow ?
At this point I would need to know which iChat Version.
However also look in the View Menu.
Is Show VIdeo Status ticked ? (this shows green Icons next to your Buddy Pic and those of your Buddies
Next go to the iChat Menu > Preferences > Video Section
Do you see a preview here ?
Re: GoogleTalk
Have you enabled TALK on your Google Account Settings ?
You need to have a Google Mail ID (Not any other sort of Google ID)
Have you downloaded the Intel only Web Browser Plug-in to do Video in a Web Browser.
10:48 PM Tuesday; August 30, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

My firewire port works with ext hd but not with audio interface

2010 Imac 21.5 running 10.8.5. My firewire port works with ext hd but not with audio interface. The local authorized Apple tech said that I need a new motherboard, but my firewire ext drive works perfectly. I don't understand. Thanks.

You must go to the website of the audio interface manufacturer and look for, download and install updated drivers for the audio device you are using.
This is not, neccessarily, an Apple issue.

Enterprise Mgr works with one db but not the other

Hi
We have two Oracle 10g databases installed. Enterprise Manager works with the second, but not the first. I believe the problem started when we migrated the host server to another network domain. Everything else works fine, but I'm getting a page load failure when attempting to access enterprise mgr.
The second db was installed after the migration and EM works fine.
Can anyone tell me how to reconfigure this?
Thank you

by any change hostname or ip was changed during migration
also can u paste the emoms.trc ?

Have Sony reader 505, ADE doesn't recognize when attached to mac OX 10.6.8. works with reader library but not with ADE

Have Sony reader 505, ADE doesn't recognize when attached to mac OX 10.6.8. works with reader library but not with ADE

YEAY!
I just got the solution (that worked for me, anyway) from a Sony support rep. No PC or VMWare needed.
OK, you've installed Sony eBook Library v3, and Adobe Digital editions, you've set up your acocunts and authorized your computer on both of them, and you've authorized your Reader with the Sony Library application.
You go to the public library ebook download page, either through the Sony Library or just through a bookmark.
You check out a book, and open it in Adobe Digital Editions, which still won't recognize your Reader.
BUT, in the Sony Library app, you can now click "File, Import.." and go find the pdf you downloaded with the Adobe app.
On my Mac, it was in ~/Documents/Digital Editions
Import it, and drag it to your Reader.
The first time you do this, it will ask you to authorize the Reader with your Adobe ID.
Worked like a charm.

Home sharing works with one account but not another?

My family has an apple tv, we've been having problems setting up the home sharing and tried everything. We eventually decided to try my brother's apple id instead of my mother's and it worked. So my question is; why does home sharing not work with one id but works with the other? any suggestions to get it to work with my mother's id?

Try resetting the Apple TV. enter your mother's ID again. Then remove her ID on iTunes and re-add it. Then see if it works this time.

Will a Mini-Displayport to VGA adapter work with new macbook pro 2011

I was thinking of getting a mini-displayport to vga adapter for my external monitor I wanted to hook up but I wasnt quite sure whether it would work as my macbook pro has the new thunderbolt port, I was confused if the new port would only work with the thunderbolt displays. Could anyone help me as I'm not too sure what will work.

I tried the Apple miniDisplayport to VGA in a Thunderbolt MBP and iMac and they both worked. Same for the Apple miniDIsplayport to DVI.

Why won't any Mini DisplayPort to VGA adapter work with my 2012 13" MacBook Pro?

Hello!
A few month ago, I purchased a new 2012 13" MacBook Pro. I quickly realised that my non-Apple MDP to VGA adapter was not working, but put off the problem as it wasn't neccesary -- and I thught that the adapter was to blame. However, after using the adapter sold by Apple, I can asafely say that the problem is with my computer. In review on the product, several 2012 MacBook Pro users mention this. I was hoping someone here would be able to point me towards a solution! Thank you.

I tried the Apple miniDisplayport to VGA in a Thunderbolt MBP and iMac and they both worked. Same for the Apple miniDIsplayport to DVI.

Does the mini display to vga adapter work with a pc (win 7 64-bit)

Its not a thunderbolt adapter. its a mini display to vga adapter. my hp ency pc has a mini display port next to the hdmi port.

First make sure the mini-displayport is firmly seated. They are a bit "sneaky" in that they look like they are fully in but aren't.
I assume that windows has something similar to the mac Displays system preferences. So you need to check that and set if necessary the proper refresh rate and resolution for the projector.
how do i make it work or is it formated for macs only?
What's "it"? The projector shouldn't care where it gets its vga signal from (when using the proper refresh rate and resolution). The adapter is passive and just converts a digital mini-displayport signal to analog vga to pass over the cable (is the cable ok?). That leaves your laptop. I can't speak about it or its video card. But I have to assume that if it supports mini-displayport it should follow the standards for mini-displayports.

HT3235 Will generic DVI to VGA adapter work with Macbook Pro (Early 2008 Model)??

I have a 15" MacBook Pro (Early 2008 model). I lost the Apple DVI to VGA adapter for use with my projector, and it appears this older model is no longer available. Will a generic DVI/VGA adapter, from Best Buy for example, work? I wasn't sure if there was anything specific to the Apple adapter? I am supposed to give a lecture in 2 days and can't find my adapter! Any help is greatly appreciated.

Yes it will, assuming that you do not have a display like the 30" Apple Cinema Display that requires dual-link DVI.

ESR,ID working with 8000 port but not with 50000

Hi experts,
I am working with PI 7.1. I am working with SOAP to ABAP SERVER Proxy scenario. I have downloaded the WSDL from ID and using XMLSPY sent a SOAP request to PI server and I got an error in SXMB_MONI under the Call Adapter step saying CLIENT_RECEIVE_FAILED.
We cross checked the services in SMICM transaction, and we missed the HTTP port 8000 for the parameter icm/servr/port_xx.
Then basis team changed the port 8000 in SMICM for the same parameter and restarted the Java stack.we checked the icm/HTTP/j2ee parameter which is having 50000 port.
Now ESR,ID,SLD,RWB... etc are working with ABAP port 8000 but not with 50000 java port and also I am getting an error in SXI_ CACHE while doing my delta refresh if_http_client receive http_communication_failure : http_communication_failure:ICM_HTTP_CONNECTION_FAILED. Kindly suggest me to resolve this error.
Naveen

Hi,
Re: Architecture of PI 7.1
NW PI 7.1 - ICM is not binding to port 5$$00
from the above two threads it is very clear that from PI 7.1 both the ABAP and J2EE ports are same.
Now we maintained both the ICM and j2ee port as 50000. Now ESR,ID,SLD are working with port 50000.
But in my SOAP to Proxy scenario I am getting the same error. When I try to send request to XI server using Altova xmlspy I am getting following error in SXMB_MONI under Call Adapter
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
When i click that HTML error It shows
404 Resource not found
I am getting the following error in CC monitoring .
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIServer:CLIENT_RECEIVE_FAILED
My reciever communication channel is in green status CC monitoring.
I tested my server proxy in my end system which is successfully fetching data.
I am using the following URL format for generating the WSDL from Integration directory.
http://host:port /XISOAPAdapter/MessageServlet?channel=p:s:c
Do we need to maintain the Fully qualified host name in the above URL?
I tried with a test scenario which is an asynchronous communication with the above mentioned URL format. I got a success message in SXMB_MONI.
Since I am using PI 7.1 I tried the following URL also but i this case,the XML spy itself throws error. I couldnt see any messages in SXMB_MONI.
http://host:port/XISOAPAdapter/MessageServlet?senderParty=&sender
Service=FS&interface=IF&receiverParty=&receiverService=TS&interfa
ceNamespace=IFNamespace
I have seen many threads in SDN for this same error but I didn't get an answer for my scenario.
Lakshman and Manjusha
Thanks for the quick responses.
Regards
Naveen
Edited by: naveen perumal on Jul 24, 2009 8:00 PM

Why does my Web Handler work with Internet Explorer, but not with Firefox

I am trying to develop a web page that uses the Simile Timeline (http://code.google.com/p/simile-widgets/wiki/Timeline) with data from SQL Server.
In initial testing of my timeline I tested it with Example.xml, a static XML file in the correct format to be event data. I wrote the following in the appropriate place within mytimeline's Javascript: -
var WebHandler = "Example.xml"
tl.loadXML(WebHandler, function (xml, url) { eventSourceFamily.loadXML(xml, url) });
This worked fine with both Firefox and Internet Explorer. I then changed the assignment to
var WebHandler = "GDBTimeline.ashx?Type=Family&Userid=" + getControlValue("input", "hdnUser");
so that invoked a web handler that could look up the SQL database and return the XML that I wanted, and wrote this web handler.
This works perfectly with Internet Explorer, but with FireFox the timeline band is blank. Yet when I examine the http traffic with Fiddler2 (http://www.fiddler2.com/fiddler2/) I see that with either browser there is a response from URL
/GDB_pages/GDBTimeline.ashx?Type=Family&Userid=robertb
that returns the XML that it is supposed to.
I have previously used web handlers with Firefox before, with no problems. The Fiddler results conclusively show that the web handler is invoked, and returns the appropriate XML, and this XML is identical to the XML from the static test with Example.xml.
Where do I start looking for answers? I don't even know if this is a Simile problem, a Firefox problem, or an ASP.NET problem.
Thank you, Robert.

Problem solved. The issue: Content Type was not correct.
Visual Studio creates the web handler with dummy code like this: -
Public Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest
context.Response.ContentType = "text/plain"
context.Response.Write("Hello World")
End Sub
I wrote a database query that set a string variable to the XML I wanted: -
Public Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest
Dim Outstring as string
' my logic to fill Outstring with XML
context.Response.ContentType = "text/plain"
context.Response.Write(Outstring)
End Sub
This works with Internet Explorer. However it's not strictly correct: to make it work with other browsers as well,
context.Response.ContentType = "text/plain"
should be
context.Response.ContentType = "text/xml"
It now works with IE, FF, and Chrome, and presumably all others.

VGA adapter works with my iPad3 but not my iPhone4

Similar Messages

Maybe you are looking for