VI server registration error

I have a VI-based server in DSC 7.1, and I try to upgrade to DSC 8.0.
I followed the instructions from NI, but I cannot register the VI server with the registration VI.
I get :
Error -1967362038 occurred at an unidentified location
Possible reason(s):
IAK_SHARED: (Hex 0x8ABC700A) Not found.
can anyone explain this error?

Hi, i suggest you file this bug to the support at national instrument.
However as a help, this means that either your server or device inside the server is not being registered correctly. One possibility is that the device name used has xml special characters in it.
One way to check it is to check the xml file that gets generated. You should find them in Program Files\National Instruments\Shared\DSC|VI Based Server\8.0\ directory. There should be 2 files, one is DSC Server.xml and if you open this you should see the server you just registered.
The other file is the server file itself, open this and see if you have malformed device name or property.
You could always attach the two XML files and the registration VI data for your server.

Similar Messages

Anyone ever figure out how to correct FaceTime Registration Error?

I am getting the same old error when trying to turn on FaceTime. I reinstalled lion and now FaceTime will not register when I turn it on and type in my AppleID and password. I have seen this before but it started working all of a sudden??? The console log shows an error:
"imagent: (warning) - TRUST validation failed with result 5"
I have talked to applecare and they were stumped also, but said they would call engineering. They tried all the usual stuff; reset permissions/acl's, deleted plist files, deleted some certificates. I was hoping since this is a reocurring issue with FaceTime someone might know a solution to this validation error by the imagent.
Any info would be appreciated.

Solved by AppleCare! Good job Gary...thank you. The trick was to delete all the files in the home/library/preferences folder and then rebooting the computer, which replaces them to defaults. Then it worked...but it requires you to re-setup all your preference settings like you had them before. I am not sure exactly what was fixed by doing this but it worked after that. However, the next day after setting up my preferences like they were before FaceTime got the same server registration error.? So, I had a thought...maybe it is the certificate settings in keychain access which I had changed to be more restrictive. Once I changed the certificate settings back to defaults, FaceTime worked again. Evidently something about the OCSP or CRL verification setting for certificates in the keychain preferences caused the registration error with the FaceTime server.
Hope this helps anyone else who has similar problem with FaceTime registration error.

Product Instance Registration Error: "System Failure: Error while retrieving xml file from database"

Hi S9 installation Gurus,
Please try to resolve this long awaited issue with Planning installation as this is purely configuration related issue.
Detail of Problem:-
After Susessful configuration of
1) Foundation Services (Hyperion Shared Services)
2) Essbase administration services
3) Essbase Server
4) Hyperion reporting and analysis
5) Planning -----> Product options, Register with shared services, configure database, deploy to application server (Appache)
Error Point: when i tick ckeck box in front of Product instance registration
click next
create instance
click next
instance name-Plan1
Web tier host name: my machine name (neeraj-pc, as i installed locally all component of hyperion)
server port: 8300 (system suggesting)
tick on active instance
click next
Error Pop Up "System Failure: Error while retrieving xml file from database"
Details of PlanningSystemDB (file :- \Hyperion\common\config\PlanningSystemDB.properties)
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=puser
SYSTEM_DB_PASSWORD=GGAKFJ
SYSTEM_DB_CATALOG=p1db
SYSTEM_DB_TYPE=SQL
INSTANCE=
Note: puser (SQL Authenticated user)
Thanks
Kumar
Edited by: user10385300 on Dec 4, 2008 5:44 AM

This has been resolved at :- Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"
Cheers
John
http://john-goodwin.blogspot.com/

Registration error in Jdeveloper while registering the portlet

Hello All,
As per the Tutorial for Oracle WebCenter Developers 11g Release 1 (11.1.1) E10273-01 guide . I am creating the sample application. I have created the portlet and deployed it on integrated weblogic server and created the connection too in the portal application.But when i am dragging the Products portlet onto the cust:PanelCustomization then it gives error.
Registration Error :- An error occured while trying to register the portlet producer products
and the error details are :-
oracle.portlet.client.container.PortletException: oracle.portlet.client.persistence.PersistenceException: Error creating MDS MO : typeName=wsrpProducer mdsId=/oracle/adf/portlet/Products.pxml
* at oracle.adfinternal.model.portlet.manager.PortletProviderManager.registerWSRPProducer(PortletProviderManager.java:2024)*
* at oracle.adfinternal.model.portlet.manager.PortletProviderManager.registerPortletProvider(PortletProviderManager.java:1582)*
* at oracle.adfinternal.model.portlet.manager.PortletProviderManager.registerPortletProvider(PortletProviderManager.java:545)*
* at oracle.adfdtinternal.model.portlet.wizards.registration.wsrp.WSRPProducerRegUtil.registerProducer(WSRPProducerRegUtil.java:308)*
* at oracle.adfdtinternal.model.portlet.wizards.registration.wsrp.WSRPProducerRegUtil.executeAppProducerRegistration(WSRPProducerRegUtil.java:189)*
* at oracle.adfdtinternal.model.portlet.wizards.registration.common.ProducerRegUtil.registerProducerWithAppForPortletDrop(ProducerRegUtil.java:293)*
* at oracle.adfdtinternal.model.portlet.datatransfer.PortletNodePluginInfo.constructPortletDocumentFragment(PortletNodePluginInfo.java:525)*
* at oracle.adfdtinternal.model.portlet.datatransfer.PortletNodePluginInfo.getData(PortletNodePluginInfo.java:132)*
* at oracle.bali.xml.model.datatransfer.operation.CreateFromFragmentOperation$1.performTask(CreateFromFragmentOperation.java:52)*
* at oracle.bali.xml.model.task.StandardTransactionTask.runThrowingXCE(StandardTransactionTask.java:172)*
* at oracle.bali.xml.model.datatransfer.operation.CreateFromFragmentOperation.apply(CreateFromFragmentOperation.java:42)*
* at oracle.bali.xml.model.datatransfer.operation.OperationProcessor._apply(OperationProcessor.java:393)*
* at oracle.bali.xml.model.datatransfer.operation.OperationProcessor._forceSimpleApplyImpl(OperationProcessor.java:346)*
* at oracle.bali.xml.model.datatransfer.operation.OperationProcessor.forceSimpleApply(OperationProcessor.java:293)*
* at oracle.bali.xml.model.datatransfer.operation.OperationProcessor.forceSimpleApply(OperationProcessor.java:243)*
* at oracle.bali.xml.gui.swing.dnd.DropHandlerHelper._doRegularDrop(DropHandlerHelper.java:273)*
* at oracle.bali.xml.gui.swing.dnd.DropHandlerHelper.performDrop(DropHandlerHelper.java:87)*
* at oracle.bali.xml.gui.swing.dnd.ModelDropHandler.drop(ModelDropHandler.java:158)*
* at java.awt.dnd.DropTarget.drop(DropTarget.java:434)*
* at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(SunDropTargetContextPeer.java:500)*
* at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEvent(SunDropTargetContextPeer.java:812)*
* at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(SunDropTargetContextPeer.java:736)*
* at sun.awt.dnd.SunDropTargetEvent.dispatch(SunDropTargetEvent.java:30)*
* at java.awt.Component.dispatchEventImpl(Component.java:4487)*
* at java.awt.Container.dispatchEventImpl(Container.java:2099)*
* at java.awt.Component.dispatchEvent(Component.java:4460)*
* at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)*
* at java.awt.LightweightDispatcher.processDropTargetEvent(Container.java:4309)*
* at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4163)*
* at java.awt.Container.dispatchEventImpl(Container.java:2085)*
* at java.awt.Window.dispatchEventImpl(Window.java:2478)*
* at java.awt.Component.dispatchEvent(Component.java:4460)*
* at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)*
* at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)*
* at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)*
* at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)*
* at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)*
* at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)*
* at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)*
Caused by: oracle.portlet.client.persistence.PersistenceException: Error creating MDS MO : typeName=wsrpProducer mdsId=/oracle/adf/portlet/Products.pxml
* at oracle.portlet.client.persistenceimpl.mds.MDSPersistenceContext.create(MDSPersistenceContext.java:576)*
* at oracle.portlet.client.beanimpl.persistence.PersistenceBeanFactory.create(PersistenceBeanFactory.java:213)*
* at oracle.portlet.client.beanimpl.persistence.PersistenceBeanContext.create(PersistenceBeanContext.java:98)*
* at oracle.portlet.client.techimpl.wsrp.WSRPClientImpl.newProducer(WSRPClientImpl.java:3395)*
* at oracle.portlet.client.techimpl.wsrp.WSRPClientImpl.register(WSRPClientImpl.java:155)*
* at oracle.portlet.client.techimpl.wsrp.WSRPClientImpl.createProducer(WSRPClientImpl.java:3155)*
* at oracle.portlet.client.containerimpl.wsrp.WSRPProducerFactoryImpl._createProducer(WSRPProducerFactoryImpl.java:130)*
* at oracle.portlet.client.containerimpl.wsrp.WSRPProducerFactoryImpl.createProducer(WSRPProducerFactoryImpl.java:107)*
* at oracle.adfinternal.model.portlet.manager.PortletProviderManager.registerWSRPProducer(PortletProviderManager.java:1976)*
* ... 38 more*
Caused by: oracle.mds.exception.ReadOnlyStoreException: MDS-01273: The operation on the resource /oracle/adf/portlet/Products.pxml failed because source metadata store mapped to the namespace / BASE DEFAULT is read only.
* at oracle.mds.core.MDSSession.checkAndSetWriteStoreInUse(MDSSession.java:2211)*
* at oracle.mds.core.MDSSession.createMetadataObject(MDSSession.java:478)*
* at oracle.portlet.client.persistenceimpl.mds.MDSSessionWrapper.createMetadataObject(MDSSessionWrapper.java:227)*
* at oracle.portlet.client.persistenceimpl.mds.MDSPersistenceContext.create(MDSPersistenceContext.java:572)*
* ... 46 more*
Please help!!!

sorry for the late reply. Yes I have checked all and see everything is fine there. Still not sure what cause this.
I have now installed 11.1.1.4.0, which is working fine.
--VipC

Re: Product Instance Registration Error Message: "System Failure: Error w

Hi S9 installation Gurus,
Please try to resolve this long awaited issue with Planning installation as this is purely configuration related issue.
Detail of Problem:-
After Susessful configuration of
1) Foundation Services (Hyperion Shared Services)
2) Essbase administration services
3) Essbase Server
4) Hyperion reporting and analysis
5) Planning -----> Product options, Register with shared services, configure database, deploy to application server (Appache)
Error Point: when i tick ckeck box in front of Product instance registration
click next
create instance
click next
instance name-Plan1
Web tier host name: my machine name (neeraj-pc, as i installed locally all component of hyperion)
server port: 8300 (system suggesting)
tick on active instance
click next
Error Pop Up "System Failure: Error while retrieving xml file from database"
Details of PlanningSystemDB (file :- \Hyperion\common\config\PlanningSystemDB.properties)
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=puser
SYSTEM_DB_PASSWORD=GGAKFJ
SYSTEM_DB_CATALOG=p1db
SYSTEM_DB_TYPE=SQL
INSTANCE=
Note: puser (SQL Authenticated user)
Thanks
Kumar

Answered by Mr, JohnGoodwin

Server encounters error processing cannot complete sign in

Trying to set up face time for mac. Cannot get past the which email to you wish to use page. "server entountered error processing registration" keeps popping up.
Help

Hi chickfeed,
Thanks for your friendly response.
Many thanks.
Managed to get this sorted - the microsoft user account was corrupted. Did a refresh on the PC. VS is sort of working after several hours of downloading updates.
So the precious issue has been resolved, am I right? If so, would you mind marking the useful reply as the answer?
VS states that I have visual studio extensions for windows library for javascript - but I do not. I think it is referring to a previous download of VS. I cannot get tools>extensions to download it again.
For this new issue, my suggestion is that you could post a new case in this forum, you know that one thread for one issue, it would be better if you open up a new thread for the new question. In this way, our discussion here will not deviate too much from
the original issue. This will make answer searching in the forum easier and be beneficial to other community members as well.
Thank you for supporting my work:)
As far as I know, we could uninstall it under Programs and Features, if you make sure that you didn’t install it before, maybe you could check it whether you could get it there.
Actually we could download this library here:
http://www.microsoft.com/en-us/download/details.aspx?id=40793
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ULN registration error

I am having a problem with uln_register.
My account is in good standing with a valid CSI for 6 registrations to ULN.
It accepts my username / password / CSI.
Two screen collecting hw stats and rpm information flash by.
It then says uploading data to oracle.
Fatal Error
Problem registering system:
Error communicatingwith server.
The message was: Server communication error. Please see http://linux.oracle.com for futher assistance.
There is no logging in /var/log/up2date.
I am running the CD image of 6.3 with a few updates from the public yum server. (Kern: 2.6.32-279.el6.x86_64)
Tcpdump indcates traffic flowing to and from linux-update.oracle.com (141.146.44.24)
17:25:26.519985 IP 141.146.44.24.https >SCRUBBED.51847: Flags [P.], seq 4418:5182, ack 1866, win 6005, options [nop,nop,TS val 1860263174 ecr 88292864], length 764
17:25:26.519998 IP 141.146.44.24.https >SCRUBBED.51847: Flags [F.], seq 5182, ack 1866, win 6005, options [nop,nop,TS val 1860263174 ecr 88292864], length 0
17:25:26.520445 IP SCRUBBED.51847 > 141.146.44.24.https: Flags [P.], seq 1866:1889, ack 5183, win 442, options [nop,nop,TS val 88293314 ecr 1860263174], length 23
17:25:26.520543 IP SCRUBBED.51847 > 141.146.44.24.https: Flags [F.], seq 1889, ack 5183, win 442, options [nop,nop,TS val 88293314 ecr 1860263174], length 0
Any ideas would be appreciated.

Short Version:
If running on Xen:
1) Check /sys/hypervisor/uuid. If it exists, is non-zero, and is unreadable, you have hit a bug.
2) This condition is created by rebooting instead of stopping then starting.
3) A stop and start will correct the condition.
Long Version (with more details):
Attempted to run:
$ ulnreg_ks username <<acct>> password <<pass>> csi <<CSI>> profile <<profile name>>
System needs a non-empty identifier
Was told this means that the system can't find its uuid.
Digging deeper you can see the python code that does this under /usr/share/rhn/up2date_client/rhnreg.py.
Looking at the comments for get_virt_info():
This function returns the UUID and virtualization type of this system, if
it is a guest. Otherwise, it returns None. To figure this out, we'll
use a number of heuristics (list in order of precedence):
1. Check /proc/xen/xsd_port. If exists, we know the system is a
host; exit.
2. Check SMBIOS. If vendor='Xen' and UUID is non-zero, we know the
system is a fully-virt guest; exit.
3. Check /sys/hypervisor/uuid. If exists and is non-zero, we know
the system is a para-virt guest; exit.
4. If non of the above checks worked; we know we have a
non-xen-enabled system; exit.
My system is OEL 6.3 running on citrix xen 6.1.
1) False (is not a host)
2) False (no bios entrypoint; no data in dmidecode)
3) Found a bug with this one. File exists but is not-readable due to bug.
4) Exits this and ends up with no UUID even though it is a virtual system.
Bug Information:
Cross referenced from https://answers.launchpad.net/nova/+question/214413.
A xen guest / host can get into a state where /sys/hypervisor/uuid is unreadable but exists.
It is triggered by rebooting the guest instead of halting and then starting.
Simple solution. Halt the system and then start it.
Code Fix: Unknown (It might have to be in kernel or xen hypversior not sure which)
Thanks for pointing me in the right direction. Hope this post might help someone a bit down the road.
Edited by: TWLinux on Jan 28, 2013 3:46 PM -- Typographical errors

Can not refresh server manager Error:0x8007045b

OS: Windows 2012 R2 Core
Services: Hyper V
I was trying to remote reboot and the session hung. No worries I decided I could just reboot the next morning. So I rebooted the next day but when I go into server manager I get
an errror can not refresh server manager Error:0x8007045b. Did some research found suggestions to fix it using a DISM.exe /Online /Cleanup-image /Restorehealth.
But then I get an error 1115 A system Shutdown is in progress. I attempt to fix this issue using pskill winlogon but the issue pursistest. I have restarted the server several times now. Not sure how to fix this.
Thanks in advance,
Jake

Hi,
In addition to the above information,
Checkout the below thread for similar discussion,
http://social.technet.microsoft.com/forums/windowsserver/en-US/a700e9f6-4491-4c70-8bd0-d9d3111e2f70/windows-reboot-error
Regards,
Gopi
JiJi
Technologies

WIndows Server 2012 - Server Manager Error CLR20r3

WIndows Server 2012 - Server Manager Error CLR20r3
I have just experienced this error of ( CLR20r3) when trying to add or remove server roles.
Server Manager crashes when trying to go into the Add/ Or Remove server roles
What I have tried.
.NET Diag
.NET Fix
Lots of research, and didn't find any resolution.
Apparently this is not strictly tied to Windows Server 2012, as I see that Windows Server 2008 R2 , and even Windows desktop users have experienced this issue. With no direct resolution.
Here is a screen shot for reference.......
If anyone should obtain the MS Fix or hear of it, please post so that others who are experiencing this issue can find peace in their day.
I have given up, ended up performing a reinstall. ( sadly)
RF

Hi RF,
Based on your description, would you please refer to following operations and troubleshoot this issue?
Please use
Sytem File Checker tool to scan all protected system files.
Please
perform a clean boot to check if some third-party services affected.
Please backup the registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Ole. Then delete following two registry key (if exist): LeagcyImepersonationLevel and LegacyauthenticationLevel
Then log off and logon and monitor the result.
In addition, please navigate to %windir%\logs and check ServerManager and CBS log file if you can find some
relevant errors.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

"Connection to server failed" error with Gmail exchange server

Hi,
I upgraded my iPhone 4 to iOS 4.3 on Friday and now I can't access my Gmail account using the Microsoft Exchange settings, I just get a "Connection to server failed" error.
I also have a Google Apps email account for my website and I am able to access it using exchange... it's just my regular Gmail account that I can't access (and that's where all my contacts are stored).
I can access the account using the regular Gmail email settings but that doesn't sync my contacts over the air, which is the advantage of using Exchange that I love the most.
I don't know if it is related or not, but I had a really hard time upgrading to iOS 4.3. I guess the update file was corrupt and it put my phone into restore mode. I had to use a different computer for the upgrade to finally work. Because I was using a different computer I had to restore it as a new phone rather than restoring from a backup, so maybe that has something to do with my email problem.
Message was edited by: KJones75

I seem to have solved the problem. I deleted my Gmail account from the phone and then changed my Gmail password from my computer, and then tried adding the account to my phone again... and surprise, surprise, it worked.
I'm not sure why changing the password fixed the problem, but I'm glad it's working again.

Problem with scanning - printer display shows "Server connection error"

My printer has been working great and I have had no problems with scanning. But two days ago, all of a succen I rec'd message "server connection error". I tried to send to email as well as computer. Got the same message. As usual, I don't recall any action on my part that could have caused this problem. The copying and printing functions work fine. Detailed advice to someone technically challenged will be much appreciated. Thank you.

Ran
into a problem with connecting to the DB on the SQL server from the IPAM server. The Dba and I checked the target SQL instance was enabled TCP and listening on a valid TCP port. SQL server was set to use port 1443 for incoming connections.
IPAM was set by default to use 1433.
Also used
netstat-n to identify issue and verified 1443 on SQL server was
being used. Made the correction under the IPAM provisioning wizard and connected to the database. Fixed.
Important note I was able to connect to the database with a .udlfile
without any issues
Also note that 2012 R2 IPAM only supports 2012 SQL Enterprise. Why?

There is a problem with the security certificate of the proxy server. Error code 18 and 38.

Hi All,
After several hours and a short night of sleep I'm out of ideas and hopefully someone here can help me trying to solve this one. First of all the situation:
Exchange 2013 on a remote location with a CA-certificate.
Outlook 2010 and 2013 on different locations, locally installed and on RDS.
When I open Outlook on my laptop all is fine, no errors, good sync, no problem. But when I open Outlook on our Remote Desktop Servers with Outlook 2013 I'm getting errors like "There is a problem with the security certificate of the proxy server. The
name on the security certificate is invalid or does not match the name of the site. Outlook is unable to connect to this server. (Error code 18)". Opening Outlook 2010 the message is the same, but the error code now is 38.
After this Outlook opens and is working, there's one more error though. After a while an security warning pops up with the message: "Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the
site's security certificate. * The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority. * The security certificate is valid. * The name on the security
certificate is invalid or does not match the name of the site."
Strangest thing is, it is the certificate of my RDS! It isn't my valid en officially bought certificate from my mailserver. What's going on? I'm out of options, what I've tried so far (in random order):
- restarting mailserver and AD;
- restarting switches;
- restarting routers;
- restarting RDS, AD and all other servers;
- bypassed proxyserver for RDS;
- created a new profile;
- checked recently installed updates;
- checked certificate on mailserver;
- checked RDS on a different location, working fine.
Nothing helped, what can I do next? Please advice.
Regards.

Found a thread that solves half my problem (https://social.technet.microsoft.com/Forums/office/en-US/70d18244-889a-4d95-ac3f-e234672a82b2/there-is-a-problem-with-the-proxy-servers-security-certificate-error-when-starting-outlook?forum=exchangesvrclients).
The first message can be suppressed by adding this to the Exchange config:
set-outlookprovider -Identity EXCH -CertprincipalName msstd:webmail.domain.tld
set-outlookprovider -Identity EXPR -CertprincipalName msstd:webmail.domain.tld
Giving the command get-outlookprovider, gives me empty information regarding the certprinipalname. Filled
this and after recreating the profile or deleting the ost-file I still have the second alert with the local certificate of my RDS.
Not completely where I want to be, any help regarding the second alert is greatly appreciated!

How to fix server identity error on iPhone 5s iOS 8.0.2

I will preface this question with saying that i am not a a tech savy person so please use layman terms and treat it as though i a don't know everything there is to know about apple products.
I get the following pop up message on my phone everytime it resets or powers on and occasionally throughout the day.
[Cannot Verify Sever Identity
The identity of "phobos.apple.com.lp.mydas.mobi" cannot be verified by phobos.apple.com.lp.mydas.mobi/sites/E/ESPN/MM_47763/ESPN_College_GameDay.ics. Review the certificate details to continue.]
Now i have no idea what would cause me to get this message as i am a girl i hate sports i would never bother to go on an ESPN site on my phone or computer or even bother to pause for more than a second on ESPN on my computer so I'm compeleltey confused how i have an error on my phone for what i presume is an ESPN site or app idk.
Please help me get rid of this ****** server error because i am at the point where i am considering taking a hammer to my phone -_-
When i view the details there is no option to delete this error or whatever might be causing it so i am stuck in this matrix of pop up window server identity error and i cannot take it.
<Edited By Host>

Hi Progmusicman,
If you are having an issue with touch ID on your iPhone, I would suggest that you troubleshoot using the steps in this article -
Using Touch ID on iPhone
Specifically -
Make sure that you're using the latest version of iOS.
Make sure that your fingers and the Home button are clean and dry.*
Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning. Make sure that your finger touches the metal ring around the Home button.
If you're using a protective case or screen protector, it must leave the Home button and the surrounding ring completely unobscured. If it doesn't, remove the case or screen protector and try again.
Tap Settings > Touch ID & Passcode and verify that:
iPhone Unlock or iTunes & App Store is on.
You enrolled one or more fingerprints.
Try enrolling a different finger.
If you can't enroll any of your fingers, take your iPhone to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for further assistance.
Thanks for using Apple Support Communities.
Best,
Brett L

Creating Open Directory Replica fails with Server Admin Error Value 1127

Hallo,
I have seen a lot of similar threads here and they were helpful up to a certain point, but in the end, they did not solve my problem.
Currently, it comes down to this. The Server Admin Error message ist really meaningless and I could not find a single for the error value on the whole wide web. As such, I switched to the command line versions of the tools involved to geht more meaningful results. It worked. Specifically, creating a replica of an openldap master means using slapconfig.
When executing
slapconfig -createreplica master.ourdomain.com diradmin
as root on the prospective replica machine, I get the following error message:
ssh command failed with status 127
That command is not allowed with the root account via public key authentication.
That makes perfect sense to me, but how is it meant to work then?
Executing slapconfig as admin tells me that this tool is to be executed as root. On the other hand, root login via ssh is not allowed in Mac OS X by default, which seems fine to me. I even changed /etc/sshd_config on the Open Directory Master machine to "PermitRootLogin yes". However, neither reloading ssh using launchctl nor restarting the whole server made this setting operational. Trying to login from command line as root still tells me:
root login is not permitted to this machine via public key authentication.
While this is the current state where I need help urgently, I changed some other things before. I tell about to exclude these issues as possible reason of failure. I got this message for quite a while:
Replica Setup failed : This machine does not have a valid computer name
I was sure, this machine meant the target machine, the open directory master, because the domain had changed there once before I had taken over responsibility as an admin in this environment. And in fact, changeip disguised an issue there. The command proposed by changeip to fix the situation did not seem appropriate because this machine is multihomed with a public and a private IP adress. Proper name resolution is available for both interfaces including reverse lookup. I dont like this setup, but it was the only way to get mail service running smoothly. Running changeip on the machine itself using these arguments
changeip /LDAPv3/127.0.0.1 internalIP internalIP old.ours.com current.ours.com
reported success in updating password server, open directory, both interfaces, hostconfig (which in fact did not change) and samba. It reported an issue with kadmin which is related to Kerberos (we dont use Kerberos yet).
Changing the hostname of the server using changeip did not solve the issue. I then found the hint to check with scutil. This showed that the Hostname was not set on the prospective replica machine. (A question aside: in how many place is the hostname stored? The traditional /etc/hostname has gone, but seems to be replaces with several other configuration files and databases. I cant see this as an advantage). Setting the hostname using scutil worked fine. However, it did not solve the problem either. At least, slapconfig now started to complain about not being able to log in as root instead of failing from the start.
I also checked all log files on bboth machines that might have to do with openldap, as there are /var/log/slapd.log, /var/log/system.log and /Library/Log/slapconfig.log. I also checked the log of th layer on top of openldap which is /Library/Log/DirectoryService.server.log. None of them revealed anything noticeable beside a lot of of entries that I have googled in the last few hours and which all dont seem to be associated with the problem in question.
I will take a break now, but I have to fix this until tomorrow and I hope to get the ultimate hint from you, dear reader.
Thanks and bye, Christian Völker

ssh command failed with status 127
That command is not allowed with the root account via public key authentication.
Initial OD replication takes place via 'ssh'. If you have 'sshd' configured on the OD Master to authenticate with public keys then the OD replica will not be able to communicate with the OD Master via 'ssh'. You must configure the OD Master to use 'ssh' with password authentication and root login enabled.
Demote the replica back to standalone. Stop any services that you may have running on the primary network interface. Then stop any services that you may have running on the secondary network interface. In the 'Network' System Prefpane remove the IP number from the secondary interface then deactivate the secondary network interface.
Assign the private IP address and hostname that you wish to use for the replica to the primary network interface. Assign the 'public' IP number to the secondary interface. Check the DNS to see that the IP address and hostname for the primary network interface resolve both forward and reverse for the hostname of the replica that you have chosen. If it does not, fix your DNS before proceeding.
In the 'Sharing' System Prefpane, change the name of the machine to the hostname (server.domain.tld) of the replica that you have chosen. Then use 'changeip -checkhostname' to see if the IP/hostname matches. Fix it if it doesn't.
Then configure the /etc/sshd_config file on the OD master like this:
\# Authentication:
PermitRootLogin yes
PasswordAuthentication yes
PubkeyAuthentication no
and the /etc/ssh_config file on the OD replica like this:
PasswordAuthentication yes
PubkeyAuthentication no
Then from the OD replica as the 'root' user issue:
slapconfig -createreplica <ODMasterIPorFQDN> <diradmin user>
Make sure that the 'diradmin' user's password contains only alpha-numeric characters -no 'option-characters' or symbols, change it first if it does. Once the process completes, reactivate the secondary interface for the 'public' IP and check the configuration of services that will be using that IP, then start your other services. Secure the 'ssh' service on both machines to disable password authentication and 'root' logins.

My iPhone gets a "web server proxy error" connecting to wifi @ home

Ever since installing Comcast Xfinity with Motorola SB6121 and Apple Extreme 5th generation, my iPhone 4 gets a web server proxy error or similar message for any apps seeking to go online. My iPod Touch 3rd generation works as does my MacBook Pro.
I've reset the router, harangued Comcast (no help - it's your phone, sir), rebooted the iPhone, checked all my settings (VPN - what's that? it's not connected), Proxy in the VPN settings is set to off. The phone will show the signal and it will check Apple Mail but Safari, Google APP anything needing web access will either hang or give the proxy error message. Apple Customer Care said call Comcast, Comcast said call Apple & I'm surprised to find little help on the web.
Here's what I found to work on a MacForum sight from 2 years ago.
1.
Settings->WiFi->under choose a network, click the blue arrow (on the right of the network nameyou use)->DHCP
     *now check the IP address with the one on your iPod Touch or computer to see if they are in sequence
     *scroll down to HTTP Proxy & make sure it is off
     -> renew lease may work
It was the making sure the IP address was correct/in sequence which I moved to the STATIC tab and input all the same information (use a screen shot to remember it - home button and on/off button at the same time, it will store in your pictures folder) and give that a shot.
The problem appears to be where multiple machines or devices are using the same router. The iPhone 3GS assigned an IP Address in order of preference, therefore 192.175.1.1 and then 192.175.1.2 etc. The iPhone 4 will assign a strange IP address which the router will not accept. You therefore need to look at the other devices linked and see what number is next in the sequence. Then go to static on the top tab and type in the IP adress manually followed by the Subnet mask, router and DNS details. Once you have completed the info press the DHCP button and HTTP Proxy as off - this is important.
2.
This is how i fixed the wifi problem...(i used my mac)
So basicly I created a new WiFi hotspot on my iMac, then I connected my iphone to it and it WORKS!
1. open System Preferences (Apple -> System Preferences) and click Sharing.
2. select Internet Sharing at the left side.
3. Then check off AirPort.
4. Then creat a newtwork name, and password
5. VOILA! look at the Wifi connections on your iPhone and it should be there!
(IF YOU HAD ANY PROBLEMS GO TO THIS LINK..
http://maketecheasier.com/create-wif...s-x/2009/10/20
THIS SITE SHOWS YOU HOW TO SET IT UP)
3.
reset Network
Same problem, but none of the above worked for me. Finally went to Settings/ General/ Reset/ Reset network settings. Saw this in a different thread.
Hope these help.
Cheers,
cs

This has solved loads of people who have this issue and have used an alternate DNS setting. Below are instructions for both iPhone OTA and on you Mac
If you are getting the error message "Unable to check for update" when you try an OTA (over the air update)
Change DNS Servers
Settings -> Wi-Fi
Click the blue arrow on your connected network
Delete everything in DNS and replace it with 208.67.222.222, 208.67.220.220
Try again
If this works, you will probably want to remove the WiFi network using "Forget This Network" and then reconnect to it to get your original DNS servers back. Alternatively, make a note of the original DNS servers before deleting them and replace it after you are done.
If you are getting the error message "Unable to check for update" when you try through iTunes
On your Mac
Choose Apple menu > System Preferences, and then click Network.
Select the network connection service you want to use (such as Wi-Fi or Ethernet, unless you named it something else) from the list, and then click Advanced.
Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 address for the DNS server.
You can use OpenDNS
208.67.222.222
208.67.220.220
or
You can Google Public DNS if you want
8.8.8.8
8.8.4.4
I have actually repointed my routers DNS so all my devices now point to OpenDNS servers

VI server registration error

Similar Messages

Maybe you are looking for