Vibrate function stopped working

The vibrate function has stopped working on my iPhone suddenly. I have an 8gb that i purchsed in July of last year. It was fine until today.

Hi pokestate73.
Have you tried resetting the iPhone? Hold down the Home button and the Sleep/Wake button until the Power Off slide screen appears, disappears, and then the Apple logo appears. Then let go of the buttons.
If that doesn't work, you'll need to try restoring the iPhone in iTunes.
If you've already tried these steps, you may need to make an appointment at your local Genius Bar. The vibration mechanism may have died.

Similar Messages

  • HT201401 Vibrate function stopped working! Help!!

    I have the iphone 3gs and i woke up one morning and it was laying on my bed and it fell of hit the carpet and seemed fine but then vibrate function stopped working now i have seen that giving it a 'whack or a knock' may put it back in place but it hasnt any suggestions as to what i could do or if i was to get it fixed what would need fixing and how much would it cost thanks?!

    Hi pokestate73.
    Have you tried resetting the iPhone? Hold down the Home button and the Sleep/Wake button until the Power Off slide screen appears, disappears, and then the Apple logo appears. Then let go of the buttons.
    If that doesn't work, you'll need to try restoring the iPhone in iTunes.
    If you've already tried these steps, you may need to make an appointment at your local Genius Bar. The vibration mechanism may have died.

  • My vibrate function stopped working

    Any ideas how to fix or why its not working???
    I have had the phone about 8 months.
    Thanks racer

    I would suggest that you double check your vibrate settings, etc., to confirm your device is truly set to vibrate.
    If all testing fails, you can seek repair. Call your carrier first should your device be in warranty.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Upon sync or backup, I receive the message, "iTunes could not back up the iPhone "iPhone name" because and error occurred. I have deleted my backup file and tried another computer, with no success.  Also, the bluetooth function stopped working.

    Upon sync or backup, I receive the message, "iTunes could not back up the iPhone "iPhone name" because and error occurred. I have deleted my backup file and tried another computer, with no success.  Also, the bluetooth function stopped working.

    Hi, EJ13. 
    I see you are having issues with backing up you iPhone and have tried a couple troubleshooting steps.  There are a couple more steps I could recommend in the article below. 
    iOS: Troubleshooting backup issues in iTunes
    http://support.apple.com/kb/ts2529
    Regards,
    Jason H. 

  • Copy and paste function stopped working?

    The copy and paste function stopped working on my laptop (ibook g4, OSX 10.3.9). It does not work in any applications, tried MS word, safari, preview.
    How do I recover this function?
    Thanks.

    Hi Magno2002
    Your Finder may have lost contact with the clipboard, so try this.
    In ~/library/preferences locate these two files and trash them
    com.apple.finder.plist
    com.apple.sidebarlists.plist
    To re-establish them, log out and log back in again.
    You will need to reset your finder and sidebar as you had them before.
    regards roam

  • Autofill function stopped working- Suggestions?

    MacBookPro, OS X - 10.8.5
    Why did my Autofill function stop working? It has always worked fine, but now when I click on the Autofill box that pops up when needed, the box turns blue and then locks on the screen.  No autofill function occurs, the box simply freezes in that screen location and stays there in front screen.  All other functions continue, but the pop-up box remains highlighted blue and frozen in place on the screen.  I can't close it or put behind other windows.  I need to close Safari to eliminate the Autofill pop-up box. 
    Open for suggestions, please.
    Thanks,
    Homey

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.

  • My iphone 4 the vibrate has stopped working and the txt tone wont work even tho it says its got a tune and when i go to turn it up on side buttons it say (headfones) but they arent plugged in, but the sound works when someone rings me???

    my iphone 4 the vibrate has stopped working and the txt tone wont work even tho it says its got a tune and when i go to turn it up on side buttons it say (headfones) but they arent plugged in, but the sound works when someone rings me???

    ATtempt to power off your device and power it back on, if that doesn't work reset all settings should resolve it for you

  • Need help with magic trackpad.  some touch functions stopped working.  battery full and all touch options checked appropriately.  whats the deal?

    i have tried everything but the tap functions stopped working.  any ideas?

    Update: I mucked about more after making this post; I installed gnome-alsa-mixer and checked the "internal mic" option and "Auto-Mute mode" (both were off), after this my headphone output works again, and does the built-in microphone (!)
    I have no idea how I ended up in this "broken" situation, or even what this option does, or how to use it without gnome-alsa-mixer (I had to install 15 packages to get this, as I normally don't use gnome)... Sound on Linux still seems no better than when I started using it 15 years ago :-( (I spent about 5 hours on this...)

  • IPod functions stops working.

    The iPod functions stops working after 5 seconds. I have set the phone with no luck.

    Same thing happened with my mine after downloading a new song from my iphone. I just plugged it into the computer and even before it synced it was working again. Hopefully this helps you.

  • Faces function stopped working

    The 'Faces' function stopped working automatically in aperture and iPhoto. Works only when specifically asked to scan for missing faces and then stops again. Anyone have any ideas?

    First reboot the computer.
    Second make sure the keyboard is plugged in (if it is a desktop).
    Third confirm the copy key combination work in other applications
    Fourth see if you over rode the key combination in the System Preferences > Keyboard preferences pane

  • Copy function stopped working

    Copy function stopped working in Numbers 2.2 (516). The Copy command in menu is still active, but it copies nothing. Any ideas how to solve this?

    First reboot the computer.
    Second make sure the keyboard is plugged in (if it is a desktop).
    Third confirm the copy key combination work in other applications
    Fourth see if you over rode the key combination in the System Preferences > Keyboard preferences pane

  • Some keys and functions stop working when i switch users.

    2 people use my computer and just recently when i switch to my user, the special function keys stop working (screen and keyboard brightness - not sure what other keys aren't working. spaces works and so does play/pause etc). also i can't log out using the key short cuts nor by going to the menu and selecting Log Out.
    switching back to the other user, the keys still work. and if i set the brightness there when i switch back the setting remain on my side. but i can't control them. the only way to get them back is to restart the computer which i can't do from my user. when i select restart, it beach balls for a few seconds then nothing happens.

    Search for PRAM Reset On Mac.  Unless restrictions of some kind are set on that other user, this shouldn't be happening.

  • Apple mouse right click function stopped working

    After 4 and a half years my Apple mouse right click function on my iMac stopped working.  However the mouse works perfectly on my other iMac.  The apple store said the problem is in the iMac.  Any ideas how to fix this?
    Thanks, jpm3577

    First log into another user account on your Mac and see if it work correctly there.  If not boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and try there.  Also try another USB port on the Mac if it's a wired mouse.

  • Image resize function stopped working

    I have been using Elements for quite a few years and have had no problem in resizing images until last week. I often use the option of resizing using the cm measurements I want. When I tried this on my laptop last week the programme would not allow me to change any of the figures in the resizing dialog box. I tried cm, pixels and percentage and none of them would work.
    I tried a number of different images from one file but could not resize any of them however I opened an image from another file which I know i have resi9zed in the past and this time the function worked fine.
    I copied the image I couldn't resize to my main computer which also has Photoshop Elements and the resize function worked fine on this computer.
    I uninstalled Elements and then re-installed it on my laptop but still have the same problem. I also have Photosphop Cs4 on my laptop and the resize function has stopped working in this programme as well.
    Hope someone can help.

      The editor saved prefs often get corrupted. You may need to rebuild the editor preferences to resolve any conflicts.
    Hold down the Ctrl+Shift+Alt keys and simultaneously click on the Edit button on the welcome screen. Release the three keys and look behind the welcome screen by closing it. Or hold down the keys whilst clicking on the desktop icon for the Editor or PhotoshopElementsEditor.exe in the Programs folder. Keep holding down all three keys until you get the settings option.
    You should see a pop up box with the words: Delete Adobe Photoshop Elements Settings File?
    Click on Yes
    Then wait whilst Elements rebuilds the preferences.
     

  • Touch function stopped working for good

    Hello everyone. I have a ThinkPad X230T convertible tablet with multi touch and pen input
    I was using GIMP when suddenly touch function stopped. The display, display buttons, system indicators, and fingerprint reader all work properly, but I am unable to use the computer using my fingers or the digitizer pen.
    Please help! I have only few days before I leave for someplace else for nearly a whole month. I want to work on an art project while I am there.
    I was working on an illustration project using the tablet.

    By the way, it keeps saying my webcam camera above the display is "used by another program"
    it may have something to do with the problem with touch fuction

Maybe you are looking for

  • How to do calculations on the combinational data.

    Hi,    I am not able to do calculations on the combinational data. I have four combinations the formula what I am expecting comb4 = comb1*comb2/comb3. For this I have written formula like below by using REC syntax. Let me know how could I do this. Pl

  • NVRaid for Nforce 4 and Win XP Pro x64?

    Well, I just assembled my new box today (Neo4 Platinum SLI is the mainboard) and I was attempting to install Win XP 64-bit. Much to my disappointment, when I went to install the raid drivers I got a message saying they aren't compatable with the x64

  • "Drive not ready" can't boot the Sun Enterprise 250 Server 400MHz

    Hi, Because I can't ping it and got no response on the console, so I had to reboot the E250 server. When I reboot SUN E250, I got the following message on the console and then it stops. Sun (TM) Enterprise 250 (2 X UltraSPARC-II 400MHz), No Keyboard

  • Navigating thru Cached Rowset

    I am trying to come up with a search page which brings 15 results at a time out of around 900 records. I have finally settled with using Cached RowSet as MS Access (97 or 2000) probably doesn't support Scrollable resultsets. Can somebody tell me how

  • How do I magnify an audio waveform vertically and display its dB level?

    How do I magnify an audio waveform vertically, either in the sample editor or in the arrange window? I'm not referring here to the track's magnification though. Also, how do I display the WAV's amplitude in dB? Only samples or percentage seem to be p