Video and audio not synchrone with apple tv after update mountian lion on macbook pro

i have a problem with my apple tv. after i bought and instaled mountain lion on my mac book pro i have trouble with apple tv and my laptop. when my laptop conects with apple tv most of the time my wifi doesnt work on my macbook but on my apple tv it stil does work. when it does work and i play a movie of my own by using itunes the first second the video and audio is synchrone but after that audio is at normal speed but the video gets behind. and i am getting sick of it. does sumbody reconize the problem and can help me with this problem?????

Same issue here- I can airplay my amazon prime library just fine from my iphone 5 but on my macbook- (mavericks, 15 inch 2013 retina with quad core i7, nvidia 650 M and SSD) it just sputters and lags.
I have noticed web video is considerably worse than local content, giving me pauses of up to 2 or 3 seconds in which video stops but audio continues in the amazon player. Youku video, however, seems relatively stable. Our subscription speed is 25 mbps, so that should be plenty to stream SD video from Amazon and doesn't account for why it would be nice and stable from the iphone, but not the mbp.
Playing light, locally hosted steam sidescrollers like Limbo is better but gives periodic drops in framerate on the Tv. when mirroring the framerate remains steady on the MBP screen.
Games airplayed from my iphone seem relatively stable, though with a noticably lower framerate on the TV than on the phone.
It seems these issues have abated considerably since yesterday's Apple TV update, but are still curious nonetheless and I'm not sure that the update yesterday was specifically meant to address those issues or if I'm just getting a time with less network interference now.
Comcast recently installed a new router/modem/phone combo, replacing our old separate modem and router setup. I'm going to test if putting the network on a different channel helps.

Similar Messages

After updating to Lion my macbook pro does not startup, it is stuck to the grey apple screen

After updating to Lion my macbook pro does not startup, it is stuck to the grey apple screen

See Here for Troubleshooting Grey Screen on Startup:
http://support.apple.com/kb/TS2570

After updating the soft my macbook pro can not mount G Drive mobile, after updating the soft my macbook pro can not mount G Drive mobile

I need a suggestion about G Drive mobile which can not be mounted with my macbook pro

Hi Buterem,
I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
How to use Activity Monitor - Apple Support
If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden

FaceTime can't be installed on "Macintosh HD" because the version of Mac OS X is too new. I removed all traces of FaceTime and still not able to install from App store. New to macbook pro with Lion

FaceTime can’t be installed on “Macintosh HD” because the version of Mac OS X is too new. I removed all traces of FaceTime and still not able to install from App store. New to macbook pro with Lion.any help with this would be greaty appreciated.

FaceTime is included in Lion. The App Store version is for 10.6. If you deleted it, restore it from a backup, or reinstall the Mac OS.

When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks

When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks

http://osxdaily.com/2014/10/17/os-x-yosemite-installation-stuck/
also use the Command-L to view logs during installation

Video and audio not in sync

Anybody else experiencing video & audio not in sync since upgrading to Lion? I have a MacBook Pro 15-inch, Early 2011 with
AMD Radeon HD 6490M 256 MB graphics. I mostly stream You Tube, Netflix, & news videos and occasionally watch movies I have in iTunes or on DVD, and since upgrading, I've seen out of sync video and audio in every one of these situations. Sometimes it starts out OK and then slowly deteriorates. Other times it just starts out that way and stays that way. Happens with all browsers as well as iTunes and DVD Player. Tried a few Google searches but haven't come across any postings reporting this with Lion, so I thought I would try here. Thanks for any confirmations and/or pointers to a solution if there is one.

Ahh...boom. I have it too. Forgot it was even there. I had it turned off back when running Snow Leopard since it was glitchy. Apparenty, I somehow reenabled it and wasn't even aware it was on since its volume was turned down. After disabling it, all video & audio appears to be in sync.
boom...the sound you'll hear as I nuke it from my system.
Thanks efrancis76 for figuring this out. Much appreciated!

Video and audio not in sync. Other answers here do not help.

My audio and video are not in sync in many streams but some are OK.
I do not have any extensions, add-ons and I am using the default theme. I have disabled hardware acceleration. I am now running in Safe Mode and the problem persists.
The video and audio sync for the first few minutes and then they work their way futhter and further apart, usually several seconds out of sync. I don't think this particular situation has been covered in the other posts.

You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

Video and Audio not in sync after capture

Hi there,
This is probably a common problem, I have trawled the site but can't seem to find and explanation for it.
I'm capturing vide/audio into final cut pro from my SONY DVR. The video i have streaming into the sony DVR is from a small covert video device which records video/audio onto an SD card. SO I'm running that into the DVR and then DVR is outputting that as DV PAL firewire (uncontrollable device).
I'm capturing the 40 minutes of video as one clip, and when i drag it into the timeline the audio and video are WAY out of sync. Is there a simple reason for why this is happening?
It's almost as if not capturing it right.
I hope someone can help,
Thanks in advance.
Jamie McIntyre

It is interesting that you are having this problem. I recently purchased a brand new Mac Pro (a week ago) and I am using Premiere Pro and it is doing the exact same thing. I mean this video and audio is REALLy out of sync. I tried capturing an hour at a time, and 30 minutes at a time. Still, no luck. I was debating on getting Final Cut, but after reading this post I am rethinking not only Final Cut, but using Apple all together. Part of me thinks that it is not a Premiere or Final Cut problem but a Mac OS problem. But hey, what do I know. I only edit for a living.

Video and audio not linking

Hello all:
I'm using FC 4.5 and for some reason the video and audio has decided to no longer link together... even though they are captured as merged files. The Stereo Pair and Link command under the Modify tab seem to have no effect (even though the clips indicate that they are - a line runs through them). Only recently started to occur. Real pain the in the buttocks. Any ideas out there?
Thanks
Adrian S

If diligent work with the link and stereo pair t'aint
What does FCP rescue do... other than trash/restore my settings?
Thanks
A.S.
working, perhaps it is time for FCP Rescue.
It can be found at the site listed below - be sure to
select the appropriate version for the FCP you run.
http://www.pistolerapost2.com/fcprescue/
cheers,
x

Quick Time 7.67 video and audio not playing in CourseCompass MyMathLab

When I first used MyMathLab through Course Compass, the video and audio played with the digital picture broken up. Since then it stopped running the video and audio. I have tried uninstalling and reinstalling Quick Time more than once without any change. Now when it is trying to load,I just get white screen with Q logo and an arrow running across the bottom of its window.

I forgot to mention I use Firefox. I just updated to Firefox 3.6.9 today. The quick Time problem already existed before I update Firefox.Is there a problem with Quick Time being compatible with Firefox?

Video and Audio not synced on .mov file in final cut, but perfect in QT!

I recently just captured a miniDV tape onto final cut. I captured it in 23.98fps. After I captured it and opened it up in final cut's sequence, the video and audio was not synced at all. it's way off and even when i try to move the audio around on the timeline and get one voice synced up, about a minute into the video it's off again.
i tried opening the video in quick time under the captured scratch folder, and when it plays in quick time, it's perfect. there is no sync problem at all. only when i open it in final cut is there a problem.
does anyone know how to fix this or what is going wrong?!
HELP ME

well i mean we recorded it in 24PA, which is what we've been doing for this project of ours. And when we go to capture in final cut we choose the Advanced Pull Down setting. So in the end, our video is in 23.98 fps.
I just thought I'd mention that just to give more details. idk if it's helpful or not

Video and audio not linked after upgrade to cc

I recently upgraded from 5.5 to CC. Every project that I know open, the video and audio are no longer linked. I right click and enabled is checked. It's a huge pain when editing!!
Another starnge thing, after I reopen a project I'll notice that the audio tracks duplicated themselves??

You're welcome.
http://blogs.adobe.com/kevinmonahan/2013/09/11/marking-posts-as-correct-or-helpful-on-the- adobe-forums/

Video and audio (in one direction only) deteriorate after about 90 seconds

I begin a two-way video chat as normal, both parties can see and hear clearly. After about one and a half minutes of normal video chat, the person on the other end suddenly starts getting a highly pixelated image of me, and they start to lose chunks of audio from me. Meanwhile I continue to get a very nice clear video and audio from them. We usually end up closing the chat, because they are unable to hear or see me enough to continue.
The first 1.5 minutes or so is always clear, it starts after that. I always receive good audio and sound from the other party throughout the chat. I have never had problems receiving video/audio.
It happens with most (but not all) people I connect to. I am in California, and I always have this trouble when connecting to a relative in Connecticut. I have the problem again with one relative in Sydney Australia, but not with a different relative in Sydney. These are just a few examples by location.
I have repeatedly tested my connection speeds, and I have good up and down speeds - more than the minimum requirements. (My speed today is 8200 kb/s Down, 1309 kb/s up).
I have also tried:
Checking my Quicktime settings - (set to 1.5 Mbps T1/Intranet/LAN)
Bypassing my Airport modem/router, by connecting directly by ethernet to my Comcast cable modem (which has no router built in)
Replaced the cable modem with a brand new one.
Changed locations - tried it at a friend's house, still had the same problem.
So, I think I have isolated the problem to my PowerBook. This PowerBook used to do iChats really well for at least 18 months. I have been having this issue for about 5 or 6 months now. I have no idea what the problem could be. Any tips would be much appreciated.
Thanks, Martin
My setup:
ISP: Comcast Cable (Cable modem)
Apple Airport Exteme Base Station
Powerbook G4 1.67Ghz, 1 GB RAM, 80 GB HD
O/S: Tiger 10.4.10
iChat 3.1.8 (with Chax)
External iSight camera

With Comcast.
Try rebooting the Modem.
This seems to refresh the connection in some manner.
Also speak to them. They may not admit any connection management but thing may "magically" get better.
1:17 PM Wednesday; August 29, 2007

My ipod touch calendar is not syncing with outlook 2007 after updating itunes

My ipod touch 4g, ios6.1 is not syncing with outlook 2007 since updating itunes last month.Also my calendar entries i added before one
month are missing in my ipod touch.Those entries are automatically deleted from my outlook and i found those entries in the deleted data
folder in my outlook. Even new entries i added in my ipod touch later are also not syncing with outlook.

See:
iTunes 11 for Windows: Sync contacts, calendars, and other info with iPod, iPhone, or iPad
or
iTunes 11 for Mac: Sync contacts, calendars, and other info with iPod, iPhone, or iPad

Itunes 10.4.1: does not sync videos and does not communicate with outlook calendars

Hellos,
Since upgrade to itunes 10.4 I have found the following problems and no solutions yet from apple (altought version 10.3 worked flawlessly):
1)When you check "include videos" on the sync photos tab, you get an error. The "solution" is to uncheck sync videos, but what if you want your videos?
2)I noticed today the calendar has issues. Appointments you input in outlook (on a calendar that is supposedly synched with iphone/ipad) do not show on the devices and viceversa (although they do show on iphne and ipad if you sync both, but outlook is left behind.
In outlook I have calendar and calendar mobile (the second is the one I sync to iphone). To test, I included a new calendar (calendar mobile test) and I as suspected when trying to sync, the new calendar does not show in itunes options to check the selected calendars. The previous library info probably show my mobile calendar (that was synched already) but the new one does not show up, so I think there is really a problem in itunes.
These bugs have been around now for some time now, and I am really surprised that are not adressed more agressively by apple developers.
While videos may seem as a secondary thing if you look at it from a corporative point of view (but ****!!! I WANT my videos on the my ipad and iphone!!!!), not synching appointments you add to the ipad/iphone and you expect to show on outlook and viceversa, are meant to be an unplesant surprise for those who rely on these devices.
Bottomline: I like ipad/iphone, but APPLE..., you need to solve these issues that have been around the forum for some time now. Common!!!
Windows 7-64 bits
Ourlook 2007

I had a similar problem. My iTunes didn't start automatically when I connected any of my devices after the upgrade to iTunes 10.4.1.
I found I had to add the iTunesHelper.app in System Preferences->Users & Groups under my account on the Login Items tab.
You have to navigate to it in finder, because I couldn't seem to do "Show Package Contents" on iTunes.app in the Applications folder from the file dialog you get when you hit '+'.
Once you have opened the package contents of the iTunes.app then the iTunesHelper.app is in Contents/MacOS. I just dragged and dropped into the Login Items window, then ticked it to start on login.
Note, this will only start it when you log in, to start it immediately just double click iTunesHelper.app in finder.

Video and audio not synchrone with apple tv after update mountian lion on macbook pro

Similar Messages

Maybe you are looking for