Video and GPS data from iPhone movie?

Hi, I have following problem/ idea for a solution: I lost the canopy of by model airplane during a flight in a wheat field. Now I am looking for a solution to find it: what about a video camera and a GPS device, flying over the field, recording video and GPS data, play back video and (hopefully) find the canopy at frame xyz. Then read out the GPS position at this frame and go back in the field to the GPS coordinates and find what I lost.
So the questions are:
1. are the Video recordings stamped (?) with a continuous GPS position
2. can this data be read out
3. is there an app that can do this
4. is this the correct forum for this question?
Thanks for any ideas
BTW: I already tried to order a new canopy, no luck...

Let me get this straight... You lost the canopy for your model airplane... Now you want to strap your iPhone to another model airplane and fly it all over in the area where you lost the canopy.
Piece of advice: Make sure you set up find my iPhone on it before you send it out on its mission. you may need it, in combination with its ability to emit an alarm when triggered remotely, to find the iPhone after it falls off the search plane.
With luck, the fallen iPhone will land near the canopy you seek.
To try and answer the questions:
1. I believe the entire recording gets 1 location coded in the metadata. It is not a continuous stream of location data.
2. Not relevant based on the answer to 1.
3. I seriously doubt it, but I won't be shocked if someone has come up with something among the half million or so apps out there.
4. I don't think there is a correct forum for this, but this works as well as any.

Similar Messages

  • Why can't I import gps data from iPhone photos in aperture 3

    I have an iPhone 4 (it's already an old model!) and why can't i still not import GPS-data from photo's on my iPhone 4 in Aperture...
    Importing photos from the iphone just goes fine...

    Richie:
    But do you see the GPS of the iPhone data in Meta data section of the Inspector (set to a preset that shows GPS), as Frank Caggiano asked?
    If the images do import the EXIF data, then you should be able to lift and stamp the GPS coordinates. I do that freuently.
    Select on of your iPhone images and lift the sata
    In the lift&stamp HUD deselect everything but the GPS coordinates, like this.
    If no GPS-coordinates do appear in this setting, then your iPhone images do not have the EXIF info required, and you may need to check the iPhone settings.
    If you see the EXIF data, then you just need to select the DSLR images that were taken at the same location and you can stamp the EXIF data to the DSLR images.
    And after that you should be able to see their locations in the Places view.

  • I try to update and backup data from iphone to iMac but keep fail

    Hi, I have problem with updating and backup my iphone to imac. If you can help me about my problem that will be great.

    Hello jennywijaya,
    I would be concerned too if I was not able to backup my iPhone.  I recommend the following article for troubleshooting backup issues with iTunes:
    iOS: Troubleshooting backup issues in iTunes
    http://support.apple.com/kb/TS2529
    If you are still unable to update after creating the backup, I recommend the following article:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Can i get GPS data from my Iphon 4S?

    can i get GPS data from my Iphone 4S?

    There are several apps that will give you lat, long and elevation.  GPS Ally and GPS Recorder are two.

  • When I first attached a cable from iphone6 to hdmi on tv, I was able to read kindle on tv. After watching movies and playing Pandora from iphone to tv through the cable, I can no longer read kindle through it. What settings do I need to change?

    When I first attached a cable from iphone6 to hdmi on tv, I was able to read kindle on tv. After watching movies and playing Pandora from iphone to tv through the cable, I can no longer read kindle through it. What settings do I need to change?

    Hi,
    Already mentioned on the following post:
       http://h30434.www3.hp.com/t5/Other-Notebook-PC-Que​stions/VGA-on-laptop-HDMI-on-TV-needs-connected/m-​...
    You need a CONVERTER, not ADAPTER The setup:
    The following list may help:
         http://www.ebay.com.au/sch/sis.html?_kw=HDMI+To+VG​A+COMPONENT+Adaptor+A+V+Digital+Converter
    Laptop (VGA) ---- Converter from VGA to HDMI ------ TV
    You also need sound, you can buy a converter with sound OR connect sound directly from laptop to TV.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I need to back up and sync multiple iPhones to a single iMac.  Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others.  How can I do this without getting all of the contacts, etc. mixed? Tnx

    I need to back up and sync multiple iPhones to a single iMac.  Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others.  How can I do this without getting all of the contacts, etc. mixed? Tnx

    This might help: http://support.apple.com/kb/HT1495.

  • Best way to export and import data from an iPhone app?

    How do people here prefer to export and import data from an iPhone app?
    For example, suppose your app creates or modifies a plist. It might be nice to provide that plist to the user for separate backup and later allow them to re-import it.
    How do people do that? Email the plist to an address? If so, how would one later get it back in?
    Is there a common way people do this kind of thing?
    Thanks,
    doug

    Or maybe the best approach for this is some sort of file synchronization feature? Is there a way of having files from the app's filesystem automatically get stored on the computer's filesystem when synchronizing and vice-versa?
    doug

  • How do you transfer pictures,video's and text messages from iphone 4 to the new model

    How do you transfer pictures,video's and text messages from iphone 4 to the new model?

    http://support.apple.com/kb/ht2109

  • Why won't my wife's new iPad2 upload the "contacts" and "calendar" data from Outlook when I sync it.  Her iPhone does it just fine.

    Why won't my wife's new iPad2 upload the "contacts" and "calendar" data from Outlook when I sync it.  Her iPhone does it just fine.

    Hi!  check out the answers given here:
    https://discussions.apple.com/message/15387968#15387968

  • Am unable to transfer/sync my "Notes" data from iPhone 6 to my MacAir and MacMini PC. Just doesn't work. Please advise.

    Am unable to transfer/sync my "Notes" data from iPhone 6 to my MacAir and MacMini PC. Just doesn't work. Please advise.
    regards / krishnakumar
    Cochin/India

    There may be other ways, but the best way I've found is:
    Set up an iCloud email account so that you can use the Notes part of this service.  Note that I said "iCloud email" not "iCloud" ... you need to enable the email service of iCloud in order to get the iCloud Notes feature.  Otherwise, the "Notes" app on your device will only store notes on your device, or maybe sync them with some other email account (e.g. Gmail, Yahoo ... but does so poorly IMO).
    On your Macs, set up the same iCloud account as on your iPhone.  Now that you've set up the email part of iCloud, you can enable the Notes feature of iCloud on your Macs.
    Be sure to set iCloud as the default account to store your notes, in case you have other email services with a Notes feature.
    New notes that you create on any device will sync to each other.
    Notes that you created before doing all this cannot sync to your Macs, since the notes were not in iCloud.  Just turning on iCloud Notes does not cause them to enter iCloud and sync -- you'd have to copy and paste them into a new note, after ensuring that iCloud is the default account for any new notes.

  • How to find when and what date my iphone was first switched on from a retailer

    how to find when and what date my iphone was first switched on from a retailer

    Depending on the Code version you are running you can look for this output . It will show when a SFP was removed and inserted.
    module-2# show port-config internal all  (This command wil differ of earlier versions of SAN OS )
    Mar 20 08:53:45 2011  00449361  fc2/20         ---   DOWN   Xcvr inserted          
    Mar 20 08:53:32 2011  00829429  fc2/20         ---   DOWN   Disable                
    Mar 20 08:53:32 2011  00826403  fc2/20         ---   DOWN   Disable                
    Mar 20 08:53:32 2011  00818936  fc2/20         ---   DOWN   Xcvr removed  

  • I've just upgraded to iPhone 4S and restored data from my old iPhone through iTunes.  I'm being asked for a password to get into my phone and the old password I had doesn't work.  I don't know what password it's looking for

    I've just upgraded to iPhone 4S and restored data from my old iPhone through iTunes.  I'm being asked for a password to get into my phone and the old password I had doesn't work.  I don't know what password it's looking for

    Thanks for replying, I'm a real techno-cretin.  What do you mean by not using the backup?  I'm busy trying to restore my new phone and it's doing a 6 hour download with updates.  Can I restore the data from my old phone backup onto the new iPhone 4S when the download is done?

  • How come although iPads are getting more powerful, the iOS apps from apple are so mediocre and just not that great? We spend all this money for the latest ipad and all we get is these $5 video and music apps from apple. Why create the iOS platform and onl

    How come although iPads are getting more powerful, the iOS apps from apple are so mediocre and just not that great? We spend all this money for the latest ipad and all we get is these $5 video and music apps from apple. Why create the iOS platform and only offer so so apps like IMovie and GarageBand ? While other developers are offering much better apps like pinnacle studio for video, Cubasis and Auria for music production, apple has not showed much growth in terms of innovation. While there's nothing wrong with making an app like GarageBand where "anyone " can make a song, how about something for real musicians or an app not so basic as it get for video editing? After spending 0ver $700 on an ipad I'd be willing to spend more than $5 for a better video or audio app.

    First, try a system reset although I can't give you any confidence.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Retrieving calendar and contacts data from OSX Server Time Machine

    Due to a system failure I went out an brought a Macbook Air. My other Mac is away being assessed by a repair shop.
    By plugging in the Time Machine drive from the other Mac I have managed to recover my files, videos, photos etc. Contacts and Calendars however are proving to to more difficult.
    The old Mac was setup using Mavericks Server as a workaround for the removal of Calendar and Contacts iTunes sync in Mavericks.
    The Contacts and Calendars are currectly synced with an iPad and an iPhone.
    Is there anyway of recovering the Contacts and Calendars data from the Time Machine backup drive, My iPad or iPhone?
    Any help appreciated with this complicated problem.
    John

    It sounds as if it is the same, or closely related, to this thread  Time Machine Service Page in Server App says "Error Reading Settings"

  • Is it possible to remove or edit gps data from photos?

    Just listened to a Mac Roundtable podcast and they were talking about removing or editing gps data from photos taken with an iPhone but they never explained how to do it.
    Is it possible to remove or edit out latitude and longitude info from photo files?

    Thanks for this, though after looking at it I'm not too inclined to use an app that requires getting into the terminal. Way too technical for me. But thanks.

Maybe you are looking for

  • Solaris 8 Zone

    Hi, What's wrong with my config ? I can't create a Solaris 8 Zone. I think there is problem with the template... Thanks ! Test 1 : # zonecfg -z s8-zone s8-zone: No such zone configured Use 'create' to begin configuring a new zone. zonecfg:s8-zone> cr

  • How do I change the "Open In" default from "Photoshop CS6" to "Photoshop CC 2014" in Bridge CC? I'm using a Mac

    I have Photoshop CC 2014 and Bridge CC when I double click or Open in Bridge CC Photoshop CS6 opens instead of Photoshop CC 2014. How can I change this dynamic link to open Photoshop CC 2014? Help!

  • BI Accelerator Project

    Hi, We have BI 7.0. Current database size is nearly 600gb. We have started a new BI project to extract data from IS-U-CCS module. We expect nearly 1TB of data for this new project. Right now we are about to complete the designing phase and start the

  • Smart form variable Prob.

    I hav a z report connected to smart form for printing. i hav main page and other windows too. on main page, Items are displayed with qty, disc., price. And on other window I m displaying Total qty, at bottom grand total of all above Items. Qty on mai

  • How to Export an Aperture Slideshow to a DVD?

    I am using Snow Leopard 10.6.8 and Aperture 3.2.2 on an iMac. I have followed the procedure set out in the Manual by selecting "Export" and choosing "Export for HD1080p" and then burning the exported slideshow to a DVD-R but neither my DVD player nor