Video Bitrate Too High

Building Project Portfolio
05/10/29 11:14:33 AM
Build Folder /Volumes/Scratch Disc/FortNite DVD
Starting DVD Build PORTFOLIO...
Compiler Initializing...
Precompiling Project PORTFOLIO
Compiling VMG Information...
Created 29 PGCs in VTSM1
Created 5 PGCs in VTSM2
Created 5 PGCs in VTSM3
Created 5 PGCs in VTSM4
Created 8 PGCs in VMG.
5 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Rendering Menu:Menu 1,Language:1...
Compiling Menu#2 (Menu 2)...
Rendering Menu:Menu 2,Language:1...
Compiling Menu#3 (Menu 3)...
Rendering Menu:Menu 3,Language:1...
Compiling Menu#4 (Menu 4)...
Rendering Menu:Menu 4,Language:1...
Compiling Menu#5 (Menu 5)...
Rendering Menu:Menu 5,Language:1...
Generating Transition: VTSM #01, VOB #1...
Generating Transition: VTSM #01, VOB #2...
Generating Transition: VTSM #01, VOB #3...
Generating Transition: VTSM #01, VOB #4...
Generating Transition: VTSM #01, VOB #5...
Generating Transition: VTSM #01, VOB #6...
Generating Transition: VTSM #01, VOB #7...
Generating Transition: VTSM #01, VOB #8...
Generating Transition: VTSM #01, VOB #9...
Generating Transition: VTSM #01, VOB #10...
Generating Transition: VTSM #01, VOB #11...
Generating Transition: VTSM #01, VOB #12...
Generating Transition: VTSM #01, VOB #13...
Generating Transition: VTSM #01, VOB #14...
Generating Transition: VTSM #01, VOB #15...
Generating Transition: VTSM #01, VOB #16...
Generating Transition: VTSM #01, VOB #17...
Generating Transition: VTSM #01, VOB #18...
Writing VIDEO_TS.VOB
Compiling Menu PGCs...
Writing VTS020.VOB
Compiling Menu PGCs...
Writing VTS030.VOB
Compiling Menu PGCs...
Writing VTS040.VOB
4 VTSs and 4 Titles will be created...
Compiling VTS#1 (Track 1)...
Muxing VTS011.VOB
Video Bitrate Too High
Build cancelled
I've been having this problem for a couple days now. I'm not sure what to do. I have 4 videos and they seem to render well under 3 GB, but it's mainly the menu that doesn't work. Can anyone suggest anything? If you have any more questions, just ask.

Well if you're using PCM audio (.aif) you've got no chance with a bitrate that high. PCM audio takes up 1.536Mbps of your total bandwidth. So at 9 you are way over already!
Even if you use DD AC-3 you pretty much have no chance too cause many encoders will spike over the max for VBR or target with CBR and at the bitrate you are leaving no headroom,
Reduce your bitrate, cause as the message says, it's too high,
-jake

Similar Messages

  • Stereo audio causes "Video Bitrate too High" error

    SOS, Whizzkids.
    I try to make a build of a DVD with 1 menu and 3 tracks. , and I get an error message "Video Bitrate Too High." I check the compression setting and they're set to factory default for SD 4by3. (4 and 7 MB).
    Get this: I delete one channel of audio from each of the 3 tracks and it compiles perfectly.
    I duplicate audio channel 1 by option-dragging to channel 2 for one track, recompile and get the same error.
    I give in. Wassup?
    Any help gratefully received.

    Did you convert your audio to AC-3 (Dolby Digital)?
    If not, this is the likely cause of your problem. Run your audio through A.Pack (if using DVDSP 3 or earlier) or Compressor 2 (if using DVDSP 4). The "Dolby 2.0" presets in Compressor 2 are the Dolby Digital, but it's recommended to change the following settings and make a new preset.
    Set dialog normalization to -31 and the Compression Preset to "None". They default to -27 and "Film Standard", respectively.

  • Video Bitrate Too High...Wha?!?! NO!!

    hello. i just spent 24 hours compressing (with compressor, from fcp) a bunch of projects of various length with various bitrates. when i tried to burn them with dvd studio pro, they all said "video bitrate too high." now, some of the projects had a video bitrate of 7.2, while others were 3.5...and they all said "video bitrate too high." what's up with that! i was using aiff audio...is there a chance that the problem was caused by that? right now, i'm re-compressing everything with ac3 as the audio format. in another 24 hours, i'll know if it worked.
    can someone help me?!?!?!

    well a maximum bit rate of 8.8 with 1.5 of AIFF file, gives us a 10.3 bitrate, unfortunetly DVD maximum bit rate is 9.8, so here you go, you are well out of spec, use a 224kbs on the AC-3 encode for the audio with a dialogue normalization of -31, and a maximum of 8.5 bitrate on your video compression and you should be a happy man next time!!!!!
    good luck,
    PJ

  • Video bitrate too high... Okay now what?

    Hello,
    As usual, when I try to build my DVD in DVD Studio Pro I get the error 'video bitrate too high'.
    I checked it out on the net, and I get what the error message means. I wanna ask you guys what I should do next. Apparently I should reduce the bitrate, by how much? Should I recompress the m2vs I have in Compressor then put them back in Studio Pro, or can Studio Pro reduce the bitrate internally?
    Thanks a lot a lot!! Please help!
    Kenji

    One of the least understood issues, bitrates. Among the more common misunderstood causes is the total bitrate includes audio processing and, because the DVD spec is so old and primitive, your total bitrate must never exceed the top end; there is no headroom for transient peaks so you could have a single frame that spikes and this can terminate the encode.
    You must use a less intensive audio file structure, that's AC3, I think.
    bogiesan

  • "Video Bitrate Too High" error on build, but i KNOW it's not too high.

    i keep getting the error "Video Bitrate Too High" when i try to build a DVD. i think its a bogus error, because A) i've successfully built a DVD with the media that it claims is too high a bitrate, and B) the media was ripped from an existing DVD and is already in .m2v and .ac3 format (with some titlecards that i added in DVD studio pro to the timeline). it shouldn't be recompressing it at all.
    any thoughts? when i took out the offending track, it just gave me the same error on another track.
    thanks much for any help!
    dav.

    thanks for the tips! can you provide me with some more info?
    1) how do i demux with another program? which program?
    2) how can i cut the last ibbp frame-group?
    its very strange. if i create a new project and try to build it from there, it works. but if i import it into my main project, it gives me the error. any thoughts? is there a setting that i can change that controls the allowable bitrate?
    thanks again.
    dav.

  • "Video Bitrate too high" message - DVD Studio Pro

    I have been using the workflow of; video from FCP, through Compressor (best 60 minutes & Dolby Audio) and then on to the build & burn format in DVD Studio Pro and a final burn through Disk Utility for about two years with flawless success.
    4 days ago I got the following "failed" message in the build & burn process in DVD SP: "Video Bitrate too high."
    I have been trying to solve this problem with these solutions:
    I threw away my DVD SP .plist file(s), exported new video from Compressor at a lower bit rate, Followed all the suggestions on the DVD SP troubleshooting basics web page, checked the discussions on this topic and followed some suggestions, uninstalled and reinstalled the whole FCP Studio, deleted files so my hard drive has more space, to no avail... I still get the message.
    I have tried everything and can't imagine what else I can do. Would really appreciate if anyone has any suggestions.

    Welcome to the boards
    Take a look at these couple of things
    http://dvdstepbystep.com/faqs_3.php
    http://dvdstepbystep.com/faqs_7.php
    Try deleting the MPEG and PAR files that were made and/or create a newly named M2v after re-encoding, could be something in those were corrupted. If you dropped in Dolby audio and using the preset without having changed it, it should work, but something can be glitchy. Also a chance there is a spike somewhere in the encoding...

  • Burn failure because "Video Bitrate Too High"

    Hi all, I'm trying to burn a dvd with 10 short films on it and just got this error:
    Starting DVD Build TESTING_DVD...
    Compiler Initializing...
    Precompiling Project TESTING_DVD
    Compiling VMG Information...
    Created 25 PGCs in VTSM1
    Created 5 PGCs in VTSM2
    Created 13 PGCs in VMG.
    19 Menu(s) will be created...
    Compiling Menu PGCs...
    Compiling Menu#1 (Ravens)...
    Rendering Menu:Ravens,Language:1...
    Compiling Menu#2 (Cowboys in Kosovo)...
    Rendering Menu:Cowboys in Kosovo,Language:1...
    Compiling Menu#3 (Red Rubber Boots)...
    Rendering Menu:Red Rubber Boots,Language:1...
    Compiling Menu#4 (Images From the Corner)...
    Rendering Menu:Images From the Corner,Language:1...
    Compiling Menu#5 (House of Wisdom)...
    Rendering Menu:House of Wisdom,Language:1...
    Compiling Menu#6 (A Conversation with Haris)...
    Rendering Menu:A Conversation with Haris,Language:1...
    Compiling Menu#7 (Its Only Mine)...
    Rendering Menu:Its Only Mine,Language:1...
    Compiling Menu#8 (I Don't Know Where)...
    Rendering Menu:I Don't Know Where,Language:1...
    Compiling Menu#9 (Father, Son, Holy Ghost)...
    Rendering Menu:Father, Son, Holy Ghost,Language:1...
    Compiling Menu#10 (Menu 1)...
    Rendering Menu:Menu 1,Language:1...
    Compiling Menu#11 (Menu 3)...
    Rendering Menu:Menu 3,Language:1...
    Compiling Menu#12 (About AMMAM)...
    Rendering Menu:About AMMAM,Language:1...
    Compiling Menu#13 (Zel bio)...
    Rendering Menu:Zel bio,Language:1...
    Compiling Menu#14 (Roberto bio)...
    Rendering Menu:Roberto bio,Language:1...
    Compiling Menu#15 (Corrine bio)...
    Rendering Menu:Corrine bio,Language:1...
    Compiling Menu#16 (Jasmila bio)...
    Rendering Menu:Jasmila bio,Language:1...
    Compiling Menu#17 (Sheila bio)...
    Rendering Menu:Sheila bio,Language:1...
    Compiling Menu#18 (HoW statement)...
    Rendering Menu:HoW statement,Language:1...
    Compiling Menu#19 (CiK statement)...
    Rendering Menu:CiK statement,Language:1...
    Writing VIDEO_TS.VOB
    Compiling Menu PGCs...
    Writing VTS020.VOB
    2 VTSs and 12 Titles will be created...
    Compiling VTS#1 (Animation demo)...
    Muxing VTS011.VOB
    Done.
    Compiling VTS#2 (Play All)...
    Writing VTS020.VOB
    Muxing VTS021.VOB
    Video Bitrate Too High
    Build cancelled
    Formatting finished.
    Building was not successful. See log.
    Does this mean the first film in the Play All track needs to be adjusted? Or that they all need to be adjusted? And adjusted to what? They fit on the disc in terms of space. Please help!
    Message was edited by: ErinSayHi

    Hi.
    I'm having a similar problem here.
    This is the log I get:
    Starting DVD Build DEMOREELOMARVELAZQUEZ...
    Compiler Initializing...
    Precompiling Project DEMOREELOMARVELAZQUEZ
    Parsing Assets...
    Encoding Assets...
    Compiling VMG Information...
    Created 7 PGCs in VTSM1
    Created 5 PGCs in VTSM2
    Created 14 PGCs in VMG.
    1 Menu(s) will be created...
    Compiling Menu PGCs...
    Compiling Menu#1 (Menu Principal)...
    Writing VIDEO_TS.VOB
    Compiling Menu PGCs...
    Writing VTS020.VOB
    2 VTSs and 4 Titles will be created...
    Compiling VTS#1 (Pizarra Lúdica Omar)...
    Muxing VTS011.VOB
    Done.
    Compiling VTS#2 (Track Spots)...
    Writing VTS020.VOB
    Muxing VTS021.VOB
    Video Bitrate Too High
    Build cancelled
    Formatting finished.
    Building was not successful. See log.
    This is a project that I already had burned to DVD with no problems whatsoever, but I recently moved from OSX 10.4 to OSX 10.5 and also moved from DVDSP 3 to DVDSP 4 and there my problem began. At the moment I have 768mb of RAM and I'm aware that DVDSP 4 is asking me for at least 1gb to work properly. Would the RAM be the problem?.
    I hope you can help me out.
    Thanx.
    Omar

  • Video Bitrate Too High-DVD

    I have edited many videos and burned the DVDs in FCX 10.1.3 without any problem until now with the dreaded warning message: "Video bitrate too high." The video is around 1 hour and 8 min. I had no problem with other videos as long as this one for sharing with the DVD. I have looked for help in Google by using this warning message. Most of the messages are related to older version of FCX. I have tried to use Compressor 4 without success. Now, I can't find any solutions from them due to the different features in the current FCX. How do I fix it? Is there anyway I can reduce the video bitrate by tweaking the software? Any suggestions? Your help will be much appreciated.

    C4 is Compressor? Do you have 4.1 or later or still in version 4.
    Duplicate the MPEG-2 preset and in the video tab adjust the maximum and average bit rate. See if this helps you get started working with the application
    http://www.fcpxbook.com/articles/compressor41/

  • Urgent help! VIDEO BITRATE TOO HIGH

    i have prepared a very simple project - 1 menu and 1 track - and when i try to burn or build and format the build is cancelled and the error message reads VIDEO BITRATE TOO HIGH. What am I doing wrong? Last week I successfully made a much more complicated DVD and havent changed any of the settings...

    Figure out the rates for your video and audio here
    http://dvd-hq.info/Calculator.html & http://www.videohelp.com/calc.htm
    to try to find what bitrate works for encoding, then encode outside DVD SP. (Make new ones with files with distinct new names. Merely changing the settings insdie of DVD SP will not work except for new projects, this way is quicker.)
    Remember to A.Pack your audio also.
    Even if the settings worked last time, if you exceeded the rate for DVDs (and encoding can have spikes in it) this problem can still occur. If you were importing movies straight into DVD SP without A.Pack/Dolby, ths increases the chance of problems.
    Usually A.Pack/Dolby of the audio will cure many issues assuming the settings for the video are not excessive.

  • "Video bitrate too high", but DVDSP burned the same project before

    I go the "Video Bitrate Too High" error. Normally I'd go back and "fix" it, but I just re-opened an old project. Same assets, same everything. Last time DVDSP burned it, this time it won't.
    DVDSP 4.2.1

    not sure if you're saying they were pre-encoded or not, If a previous project is coming up with warnings it did not have before and refuses to burn, you might try throwing away the PAR files associated with the assets - these may be giving DVDSP inaccurate info about the bitrate and GOP structure.

  • "Video Bitrate too High" error when i build/format

    Help! Ive reduced my bitrate to 2mbps for a 2 hour dvd project, and I still get a "bitrate too high error" when I try to burn. Even if i try to create an image and burn with toast, I still get the same error. I've also tried burning with a dual layer dvd and still no luck. Any help would be much appreciated.

    iami
    Are you encoding inside DVDSP? Then the cause of the error most probably is related with your audio. DVDSP use uncompressed audio (AIFF) what takes a lot of the available total bitrate. Use Compressor to encode your video & audio as follow:
    For 2hs of video you must be fine using the standard *120 min* MPEG2 preset AND the Dolby2 (AC3) audio preset. Ue those files in the DVDSP project and try to build again.
    Hope that helps !
      Alberto

  • Video Bitrate too high in DVD Studio Pro

    I have recently just purchased a new system. I export from FCP using compressor. The settings that I use are mpeg2 and dolby 2.0 for the DVD that I am trying to produce. I build the menu and press simulate the project and everything works.
    As soon as I hit the burn button a warning hazard sign flashes up saying video bitrate to high. What should I do so that I can produce DVD's.
    Thanks
    G5    

    Hi:
    What encoding settings or hat preset did you use to get the mpeg2 video? Are you using just the AC3 audio or AIFF too?
    Are you using multiple video angles?
    NOT RELATED WITH HIGHBITRATE, BUT ADVICED
    Before selecting burn, you can (and it's adviced!) make a build&format in your hard drive. After that you can create a Disc Image and use Disk Utility and/or Toast to burn. Read here: Creating Disc Image in DVDSP
    PLEASE, complete your system profile info (hardware and OSX and FCS versions).
    . . . and wellcome to the forums !
      Alberto

  • Burn in DVD Studio Pro only says Video Bitrate too high

    My camera is a Sony Ex1 and I have a 1 hour and 7 minute video that I have sent through Compressor to DVD Studio Pro, which I have done many times before upgrading to FCP 7, and now when I try to build it, it always tells be that the video bitrate is to high. I have gone though preferences and reduced the bitrate to 3 and max 5 and it still does it. I have also made a Quicktime movie and tried to build and burn it in DVD Studio Pro and that does not work either. I have no problem viewing it in DVD Studio Pro when I simulate it.
    I would appreciate any help you guy could give me. This is just a hobby, but I have been doing it for over 5 years and have never had this problem.

    Dexil Rold wrote:
    When I got DVD Pro 7, I installed 10.6 on a new 1 Tb hard drive and then installed DVD Pro 7, so it was installed on a completely new drive. When I ran my movie through Compressor, I did it two times. One with the DVD 90 Best, one with a suggestion by the new book on Studio Pro 4 (average 4.5 Mbps, Max 7.5 Mbps. I also made a Quicktime Movie. I did have to try several times to get it through Compressor, after hours FCP would quit before it was finished, but I did get it to work
    It could be spiking with the 7.5, doubtful, but could be even with AC3 audio.
    Try this to see if it works - Export the Final Cut movie as self contained movie (is that what the QuickTime Movie was, the entire timeline self contained?) Sorry I am a bit unclear as to whether you got that to go through Compressor or was it the timeline from FCP, which quit, but successfully went through Compressor. Perhaps it is related to Snow Leopard.
    When you look at the build files on your hard drive, is it crashing out at the same point?
    Take a look here http://dvdstepbystep.com/vts.php at the image at the bottom, does the build get to the same spot and/or does it throw the error in the log at the same part? Anything else in the log?
    Anyway, there would be a few things to try.
    I would think the easiest is to
    1.) Export a small section of the movie from Final Cut as a self contained movie.
    2.) Bring that movie into Compressor and run Compressor on it (including AC3 files) then bring that into DVD SP to see if it builds.
    If it does, it would seem to be that there may be a spike causing the error (are you using multiple video streams, subtitles or anything else or is is a straight one video/one audio on the track.)
    If that works it would seem to be a spike issue, especially if the error is thrown at the some spot in the building process.
    If it gets past that, export the entire timeline and run it through Compressor and see if that works, dial down the top bitrate a bit for the video.
    You could also do some other things (make another partition for an install of Leopard, not Snow Leopard, try a new user, etc.) but the above may be the easiest to start with.
    When you say it takes hours to send from Final Cut, is that sending from Final Cut to Compressor or Final Cut to a self contained movie? Of course alot of this depends on your Final Cut timeline, codecs, color corrections, renders and the rest, but on a Octo it should not be painfully long for a 1 hour few minutes movie. I ave Final Cut 7 on a laptop and it does a pretty good job speedwise on some HDV timelines, which are a pain to send out. You may want to check things like where you set your scratch disks, when you are putting the media etc. (More as an aside FYI)

  • Blu-ray Fatal Error Code 6: Video Bitrate too High?

    So I get this error every time I try to encode my Blu-ray disc. I am assuming that the bit rate I used to encode from Premiere was too high. Am I correct? If so, does this mean that I need to re-encode all of my assets at a lower bit rate before bringing them into Encore? Or is it some other issue? I did read all previous posts on this topic and couldn't really find an answer.
    Thanks for any help.

    Stan,
    I don't fully understand either of your questions, but I am sure I can provide an answer that you will understand so here goes.
    My audio files in Encore are actually wav files, but in my the root project folder they are ac3. Is ac3 an audio codec or something? I don't understand this. I guess they are session files, whatever that is... And why does this matter?
    And what do you mean that Premiere and Adobe Media Encoder should not allow any peaks. Do you mean bit rate peaks?
    And my only worry with making a modest drop in the bit rate is the fact that I have to render out almost 20 files before I can test out my Bluray burn again. This obviously takes some time to do and if it ends up not working it can be quite frustrating.
    Thanks again for all of the help Stan. Hopefully I can fix it by just adjusting the bit rate.
    - Jason

  • Video Bitrate too high, even reducing video quality

    I'm having difficulties on building a DVD9 that I need to send to the factory.
    Even though I reduced the video quality from 6.6 to 6.4, the problem still happens.
    Does anybody have any idea of how to make this thing build, without converting the 2.0 audio to .ac3?
    Is the problem, anyhow related to the Max Bitrate, on VBR?
    If yes, using a 6.5Mbps CBR will my problem be solved? The quality of the video will be harmed? How bad?
    Here are the specifications:
    Space occupied: 7.3 GB
    Main video:
    Duration: 85'
    Encode: mpeg2 One pass VBR
    Average Bitrate: 6.4Mbps
    Max Bitrate: 7.5Mbps
    Audio: 2.0 PCM
    5.1 Dolby .ac3
    Making of:
    Duration: 15'
    Encode: mpeg2 One pass VBR
    Average Bitrate: 6.3Mbps
    Max Bitrate: 7.4Mbps
    Audio: 2.0 PCM
    Menus
    3 motion Menus with .ac3 audio
    3 static Menus with .ac3 audio

    There is a tutorial on the proper settings for AC3 encoding at; http://www.kenstone.net/fcphomepage/a_packwarmouth.html
    The tutorial is on A.Pack, which has been since folded into Compressor, but the settings are the same. If its done right, the ac3 file will sound identical to the PCM file.
    BTW when you provided audio samples for the client to listen to did you tell them, "This is the compressed ac3 file, and this is the PCM file." Or did you correctly tell them, "Listen to these two files, sample A and sample B, and tell me which sounds better, or do they sound the same." And obviously you cannot have them look at the files because one will be significantly smaller than the other.

Maybe you are looking for

  • ADF View objects question

    Hello, I created a view object (which bases on an entity object) that I'd like to use for searching for records in a table called "CARS". Cars will be searched by names. I also have a JSP page for adding cars (administration functionality). The situa

  • Image Quality - how to preserve it?

    I have a web application in which I draw into a BufferedImage and Graphics2d created as follows: BufferedImage bi = new BufferedImage(xlen,ylen,BufferedImage.TYPE_INT_BGR); Graphics2d g2 = bi.createGraphics(); At this time, I am creating plots that m

  • How do I reference another table value in Pages?

    Hi there, I have a quote set up in Pages with a number of tables that refer to different products.  At the end, I want a summary table that refers to the values of each of these separate tables, but want to make sure it updates automatically if one o

  • Stock overview per vendor

    Hi Experts, I have an question. Made an query but need 2 extra coloms with the total amount sales and puchase per item. SELECT T2.[CardName], T0.[ItemCode], T0.[ItemName], T0.[OnHand], T0.[IsCommited] AS 'Bevestigd', T0.[OnOrder] AS 'In Bestelling',

  • How to transfer notes between your mac and Ipad without an internet connection?

    Let's say you write a note on your Ipad. Then you want to use this very note on your macbook (mountain lion) but unfortunately you have no internet connection available at this moment. Normally, you could just plug in the Ipad using a USB cable and s