Video cannot be played after exiting and reentering Apple's video app.
When I play a video in Apple's video app, leave the app and then reenter the app I cannot play the video anymore. The screen is just completely black, but the device is definitely active (e.g. the sign for assistive touch is still there). The controls that are normally shown after tapping the display cannot be coaxed to appear.
I used to have this problem under 4.3 already but then the video played if I used the controls in the taskbar (where the symbol for stopping screen rotation also is). But now these controls always start the Music app.
By the way, all videos were synced to the device after the upgrade.
Anyone else have this problem and have a solution? Any help would be appreciated.
I seriously wish I hadn't upgraded to iOS 5. No more MTG, no more chapters in audiobooks. It shouldn't be called an upgrade but a downgrade.
I'm having the same problem. I have been downloading and playing tikibar for over a year. Now, I can download it to itunes, but when I try to drag and drop it to my ipod, it says that it was not copied because it cannot be played on this ipod.
I recently had to import my music files after upgrading itunes, but I downloaded this episode after that. Audio podcasts work fine.
I tried right clicking and "converting" it to ipod. It did something, but I get the same message afterwards as well.
Similar Messages
-
Can't sign in in to iTunes (home sharing) after reset and update apple tv3
can't sign in in to iTunes (home sharing) after reset and update apple tv3
I'm experiencing the exact same thing. Netflix, Youtube and everything else works perfectly, but I'm unable to wirelessly stream anything from my Mac, iPad, or iPhone. All on same wireless channel, all new updates, all have home sharing turned on. Never had a problem the last 2 years.
-
Video podcasts won't play after archive and install
I'm one of the folks having capture issues with FCP 4.5 and OS X 10.4.9. So I decided to archive and install to 10.4.8. Now it seems I'm having all kinds of video problems, including downloading and playing video podcasts in iTunes (7.2). When I download a podcast, say "Tiki Bar TV", the file downloads, but in the podcast screen, I get an error message which reads,
"There is a problem adding the video to iTunes. The file might be corrupted, or a file type that iTunes cannot play." For the record, I have never run into anything like this before. And it's the same way with every video podcast.
I had some similar wonkiness going on with QuickTime, too. But after I installed a divx plug-in, and flip for mac, everything seems to be okay with the QT. iTunes is still a mystery. Any ideas on what my next step should be would be appreciated.
Thank you.
Ben
PowerMac G5 Dual 2.5Ghz Mac OS X (10.4.8) 3GB RAM, 500GB hard drive, ATI9800XTThere are files that are not brought along with Archive and Install.
Some are invisible and not accessible without enabling "root" access and even then you have to know exactly which files have to be moved from the 'previous System' folder.
Archive and Install never works with Apple's Pro apps.
If Niel's suggestion doesn't work you'll have to erase your hard drive and reinstall everything making sure you first backup important data to another hard drive.
(don't forget to save your mail and addresses) -
I am trying to sync my music on a new iPad mini but get a box which tells me "some of the music was not copied because it cannot be played on the iPad", then no music is show on the iPad at all any suggestions please
Make sure that yo have the boxed chanced to only sync the checked music. It appears that it is trying to sync ore than those.
You can try unsycing all music and resyncing. -
Whatsapp Audio Note from Android, cannot be played after iOS6
Hi,
I update my 4S to iOS6 last night and today when my friend sent me an AUDIO NOTE on whatsapp - it said " Audio Fille Cannot Be Played "
where as it use to play all the time earlier. I tried mailing it to my eamil add and then playing in Safri - but still it did not help. It has a file format 3GA which apparently iphone is not playing
Is it something to with iOS6 ?? or is it some Andriod / iPhone compatibility issue lately ?The only way now in order to play the sound is through mailing that AUDIO NOTE to myself, Opening in my laptop - saving it - changing the file extension from .3ga to .mp3
Thought might be useful for some, who has not resolved this pathetic problem -
Playing my music and sounds in the Music app in iOS5
I've loaded sounds and music that I've made onto my iPad via iTunes and they have played in the Music app quite happily in iOS4.
Now that I've updated to iOS5, only songs I've purchased in the iTunes store play, those sounds and music I have made will not play.
Is there a setting I should be aware of that will enable them to play?
It's annoying because it means I cannot use my iPad to play my sound work to directors...It would help if you said exactly what steps you took to get your music from your old computer to your new one. Also where your music was located i.e. was it all in the iTunes Music folder or was it in other folders in My Music - this tends happen if you saved music outside iTunes.
The exclamation marks mean that iTunes can't find the tracks.
Note that one thing that can go wrong is that your account name is not exactly the same as it was on the old computer.
The default loction for iTunes music files is:
c:\Documents and Settings\<youracountname>\My Documents\My Music\iTunes\iTunes Music.
You can see that the accountname is part of the location. -
My iPad was logging me out so I have reset it - it retained all apps but I cannot now log into iCloud and when downloading apps it defaults to the wrong email details so the iPad doesn't recognise it to update - can anyone suggest how to resolve this
Have you attempted to access your Apple ID through iforgot.apple.com ?
If you have access to the internet, you should be able to go through the process of resetting your Apple ID password via security questions or email.
Assuming that you use the same Apple ID for iCloud and the iTunes/App Stores, resetting your password may help you log back into iCloud and the iTunes/App Stores. -
The screen where you should select the apps you want to share is greyed out. It won't et me drag them either. Any thoughts?
Thanks!Hi skippy2012trev,
Welcome to the Apple Support Communities!
I understand that you updated your Apple Id and password but now you are being prompted for the old information in iCloud. You are on the right track by changing the Apple ID back to the previous email address temporarily so that you can sign out. You should not need to verify the email address. After you edit the Apple ID back to the old email address and then sign out of iCloud on your iPhone, edit the Apple ID back to the address you would currently like to use. There is no need to change the password again, only the email address, unless you prefer to update the password again.
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Cheers,
Joe -
Login problem after installing and activating OS X Server app in Yosemite
After installing and activating file sharing on OS X Server on my MacBook Air, the MBA was restarted. At the login screen I enter my password into my account and it directs me to a 'Guest' login screen, asking for a password which I did not create.
HELP!!!!!There is no longer any provision for starting a PostgreSQL process other than the ones reserved for built-in services. Create a launch daemon with content such as the following:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<dict>
<key>Label</key>
<string>org.postgresql.postgres</string>
<key>UserName</key>
<string>_postgres</string>
<key>GroupName</key>
<string>_postgres</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Server.app/Contents/ServerRoot/usr/bin/postgres</string>
<string>--apple-configuration</string>
<string>/Library/Server/PostgreSQL/Config/org.postgresql.postgres.plist</string>
</array>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/Library/Server/PostgreSQL/Data</key>
<true/>
</dict>
</dict>
<key>StandardErrorPath</key>
<string>/Library/Logs/PostgreSQL/PostgreSQL.log</string>
<key>StandardOutPath</key>
<string>/Library/Logs/PostgreSQL/PostgreSQL.log</string>
</dict>
</plist>
<plist version="1.0">
Also create these directories and files, owned by _postgres:_postgres:
/Library/Logs/PostgreSQL
/Library/Server/PostgreSQL
/Library/Server/PostgreSQL/Backup
/Library/Server/PostgreSQL/Config
/Library/Server/PostgreSQL/Config/org.postgresql.postgres.plist
/Library/Server/PostgreSQL/Data
Finally, initialize the database with a suitable invocation of initdb(1).
For more details, see the PostgreSQL documentation. You may find it easier to use a packaged third-party distribution independent of the built-in one. -
Iphone4s and iCloud/Apple Movie Trailers app stuck in loop using battery on wifi
This one is a long story and took me a day or so of looking around to figure out. I don't know if it causes all the battery drain issues, but it was at times causing some usage on my 4s.
Background:
I use my mac as an iTunes server - always running - so AppleTV can reach it etc via homesharing. I have a TimeCapsule too and a neat feature is wake on demand proxy where if the the mac is set for wake on demand and it is a sleep, the AppleTV will wake it via the proxy. Works great. Even the iOS remote apps will wake it. Anything requesting a bonjour service that is active on that sleeping mac will wake it. All was good.
Then one day, I noticed it waking in the middle of the night - whenever the iPhone turned on with a notification. I thought that was weird. I quit the apps. hard reset, etc. Still occured. I could put the mac to sleep and just turn on my iPhone and it would wake. Note I have an iPad and it did not exhibit this behavior. I gave up for a few days. Mac would go back to sleep after 10 minutes so no big deal.
Side note I also have wifi sync OFF. I had it on for itunes syncing but noticed that iTunes maintained a constant connection to the phone even when not wired so you can drag and drop to the phone etc. So to be sure that was not draining battery, it turned it back off. It also would wake on demand when it was enabled so I knew it wasn't that setting causing the issue.
Investigation:
I started with netstat and my airport logs. I found my mac address, ip address, and then found when I turned on the phone a connection established everytime to port 49166 on the phone. It would create a connection everytime the phone turned on.
I used 'sudo lsof -i -P' to find the process opening the host port on the mac to that phone port. It was 'ubd'. Looking that up on google, I found it was the Ubiquity process. I also found that it had a log in '~\Library\Logs\Ubiquity'. Looking at the log, I found the following occuring whenver I turned on my phone and usually very few minutes while the phone was on:
[ERROR] 99090c4718 [11/11/22 09:50:34.347] {D2650C3E} 264.connect-https://xxxxx-xxxxx-iPhone.local.:49166 parse_cert_challenge:608 signer 0: com.apple.idms.appleid.prd.4243556669426c674b3255694250464d4d41395633513d3d
[ERROR] 9911fa663c [11/11/22 09:50:34.497] {D2650C3E} 264.http_runloop client_received_error:401 client 0x7fa868433850 error The operation couldn’t be completed. (OSStatus error -9801.) userinfo <CFBasicHash 0x7fa86862e5b0 [0x7fff74f3af40]>{type = immutable dict, count = 0,
[ERROR] 9911fa663c [11/11/22 09:50:34.497] {D2650C3E} 264.http_runloop client_received_error:401 entries =>
[ERROR] 9911fa663c [11/11/22 09:50:34.497] {D2650C3E} 264.http_runloop client_received_error:401 }
[ERROR] 9911fa663c [11/11/22 09:50:34.497] {D2650C3E} 264.http_runloop client_received_error:401
[ERROR] 9b655ad834 [11/11/22 09:50:44.486] {D2650C3E} 264.ubd-main-loop save_local_state:5772 NOT saving identity 0: 'com.apple.idms.appleid.prd.4243556669426c674b3255694250464d4d41395633513d3d' of type 2
[ERROR] 9d5e1dfa80 [11/11/22 09:50:52.954] {D2650C3E} 264. shutdown_file_transfers:714 cancelling any pending ftrs from peer 0x0003
I assumed those 401 errors were http errors. The logging would kick in whenver the phone was turned on. I figured a loop like that must be using battery at least on wifi. I don't think it does this on 3g. I didn't know if this was related to the wake issue but it was the only clue.
I found a macworld article on problems with iCloud/Ubquity causing a hang. I didn't have a hang but I wondered if there was a file sync of some sort going on. I remembered reading somewhere that on OSX, documents for sync are kept in '~/Library/Mobile Documents'. So I looked there. I found one file called '43LU875E5~com~apple~movietrailer' and a hidden directory called '.ubd'. which has files with names and id's that matched some early parts of the log.
I was at a loss. Since it was a connection problem, I took Safari on OSX, turned on the phone, and connected to the https address in the log. Sure enough, I got messages from keychain to add roots and ccerts etc. Did this and eventually got an error returned. But it did connect which meant the phone was running a web server. Neat. And ubd wanted to connect to it and couldn't and was going to keep trying forever.
Since the only clue I had was the movies trailer data file, I went to my iCloud control panel and sure enough there is a movies trailer data file in iCloud (along with my ipad and iphone backups). So I tried to delete it . iCloud returned an error and could not delete. OSX console log showed an http 500 error.
So, I figure not much else to do, so I delete the app from my phone and my ipad. It even gives a nice warning when deleting that you have a file in iCloud that you may want to delete. Unfortunately, I still couldn't.
Final Testing
After deleting the app from the phone, I checked the ubiquity log. I could turn on and off the phone and it would no longer create the log entries, no netstat connection, no web server running anymore. I put the mac to sleep, and turned on the phone, It would not wake it up. Repeated test. Passed. Opened the Remote App and it woke up the Mac as expected. Everything was back to normal and I no longer had a looping connection between my Mac and my phone. Note - this occured even when the trailers app was shutdown on the iphone. This appeared to be an iCloud sync issue.
Final Thoughts
- This did not occur with my iPad and it had the same app. I deleted it there to be safe.
- I have no clue how much battery this uses. I have pretty good life most of the time and my assumption is no matter what, it would help to turn this loop off. It was really the waking the mac all the time that had me bothered. I just stumbled on a bigger issue.
- I doubt the problem is occuring all the time. My ipad did not have the issue, only the iPhone. It was likely an anomoly that showed up and may or may not occur. I thought posting the experience and if anyone else is having similar problems this may help. I am not advocting that everyone remove the app. Just take a look around if you are using the app and are seeing issues.Thank you!!! Thank you!!! Thank you!!! Thank you!!!
Hallelujah!!! Thanks for the correction (fat fingers, as you suspected).
Now to the good news. I started Safari, then pasted the URL in and pressed Enter. To my utter amazement the quicktime "Q" logo appeared briefly, then a "screen" box in the window and the movie itself began to load. After a short while it began to play, just like it should!
More good news. The exact same technique worked in Firefox as well!
Now the not-so-good news. When I enter the URL in Quicktime Player "Open URL", the player window opens showing the audio and video controls but no "viewing screen". I let it run for about 5 minutes and nothing ever appeared. I must qualify this by saying that right now my wireless connection is running very slow, so I will try QTP again when things are moving faster.
Believe it or not, this is the very first suggestion I tried that actually made a noticable difference. Of course, this is still a workaround (which I will gladly use). Hope there is a permanent resolution to this somewhere.
BTW, I plan on downloading and re-installing OS X 10.5.2 using the "Combo" package. My original install of both 10.5.1 and .2 were done via "Software Update" and this is the only other suggestion I've seen that might resolve my issue. My plan is to do the re-install only on the G5. If it corrects the problem there, I'll wait a week and then do the same with my MacBook.
In either case I will let you know the results in a follow-up post to this topic. -
RAC database cannot be connected after Grid and RAC DB have been installed
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (main VM rac1 and slave VM rac2) with Oracle Linux 5.6
according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
Grid and RAC database have been installed successfully for both VMs rac1 and rac2. I am using the slave VM rac2 to test Grid and RAC database.
I have run the commands as below:
[ora11g@rac2 bin]$ pwd
/u01/app/grid/bin
[ora11g@rac2 bin]$ ./crsctl status resource
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Status failed, or completed with errors.
[ora11g@rac2 bin]$ ./srvctl config database -d racdb
PRCD-1027 : Failed to retrieve database racdb
PRCR-1070 : Failed to check if resource ora.racdb.db is registered
Cannot communicate with crsd
[ora11g@rac2 bin]$ ./sqlplus SYS/SYS
SQL*Plus: Release 11.2.0.1.0 Production on Sat Mar 10 14:07:07 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name: SYS
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name: SYSTEM
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
[ora11g@rac2 /]$ /u02/11g_db/ora11g/racdb/sqldeveloper/sqldeveloper.sh
In its GUI, the inputs are below:
Connection: C1
Username: SYS
PWD: SYS
Role: SYSDBA
Connection Type: Basic
Hostname: rac2.localdomain
Port: 1521
SID: racdb2
Test: failed. Network Adapter could not establish connection.
Browser url: https://rac2.localdomain:1158/em
Its output: cannot connect to the server at https://rac2.localdomain:1158/em
As we see the outputs for commands above, Grid is running at the beginning but now is not running. SQLPLUS and SQLdeveloper cannot connect with database. Browser url cannot connect to the console https://rac2.localdomain:1158/em.
My question is:
Do any folks understand how to solve the above 4 problems ?
Thanks.Folks,
Hello. Thanks a lot for replying. The last 50 lines of the file "ocssd.log" is as below:
[ora11g@rac1 cssd]$ pwd
/u01/app/grid/log/rac1/cssd
[ora11g@rac1 cssd]$ ls
cssdOUT.log ocssd.log ocssd.trc
[ora11g@rac1 cssd]$ cat ocssd.log
2012-03-08 21:13:54.415: [ CLSF][1150617920]Destroying CLSF context
2012-03-08 21:13:55.418: [ CLSF][1150617920]Allocated CLSF context
2012-03-08 21:13:55.418: [ SKGFD][1150617920]Handle 0x7105660 from lib :ASM:/opt/oracle/extapi/64/asm/orcl/1/libasm.so: for disk :ORCL:ASMDISK1:
2012-03-08 21:13:55.418: [ CLSF][1150617920]Opened hdl:0x710d800 for dev:ORCL:ASMDISK1:
2012-03-08 21:13:55.470: [ CLSF][1150617920]Closing handle:0x710d800
2012-03-08 21:13:55.470: [ SKGFD][1150617920]Lib :ASM:/opt/oracle/extapi/64/asm/orcl/1/libasm.so: closing handle 0x7105660 for disk :ORCL:ASMDISK1:
2012-03-08 21:13:55.470: [ CLSF][1150617920]Destroying CLSF context
2012-03-08 21:13:56.472: [ CSSD][1685425920]clssnmlfmtlease: uniqueness 1331259161, gipc addr nm_rac-scan#192.168.137.35#36456
2012-03-08 21:13:56.608: [ CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
2012-03-08 21:13:56.697: [ CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
2012-03-08 21:13:56.754: [ CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
2012-03-08 21:13:57.425: [ CSSD][1685425920]clssnmlgetslot:lease acquisition for node rac1/slot 1 completed in 19380 msecs
2012-03-08 21:13:57.559: [ CSSD][1685425920]clssnmvDHBValidateNCopy: node 1, , has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 89443, LATS 4294905400, lastSeqNo 89443, uniqueness 0, timestamp 1331258081/38436564
2012-03-08 21:13:57.559: [ CSSD][1685425920]clssnmvDHBValidateNCopy: node 2, , has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 80216, LATS 4294905400, lastSeqNo 80216, uniqueness 1331259094, timestamp 1331259236/4294905820
2012-03-08 21:13:57.860: [ CSSD][1685425920]clssnmvDHBValidateNCopy: node 1, rac1, has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 89444, LATS 4294905700, lastSeqNo 89444, uniqueness 0, timestamp 1331258081/38436564
2012-03-08 21:13:57.860: [ CSSD][1685425920]clssnmvDHBValidateNCopy: node 2, rac2, has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 80217, LATS 4294905700, lastSeqNo 80217, uniqueness 1331259094, timestamp 1331259237/4294906920
2012-03-08 21:13:58.049: [ CSSD][1685425920]clssnmvDHBValidate2012-03-10 12:07:08.298: [ CSSD][471957248]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331399227
2012-03-10 12:07:08.300: [ CSSD][471957248]clssscmain: Environment is production
2012-03-10 12:07:08.300: [ CSSD][471957248]clssscmain: Core file size limit extended
2012-03-10 12:07:08.518: [ CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-10 12:07:08.518: [ CSSD][471957248]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-10 12:07:08.519: [ CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-10 12:07:09.675: [ CSSD][471957248]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-10 12:07:09.675: [ CSSD][471957248]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-10 12:07:09.675: [ CSSD][471957248]clssscmain: Running as user ora11g
[ clsdmt][1088276800]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-10 12:07:09.821: [ clsdmt][1088276800]PID for the Process [5971], connkey 4
2012-03-10 12:07:09.822: [ CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-10 12:07:09.823: [ CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-10 12:07:09.847: [ CSSD][471957248]clssscmain: initgminfo done
2012-03-10 12:07:09.971: [ CSSD][1098766656]clssgmclientlsnr: Spawned
2012-03-10 12:07:09.971: [ CSSD][1098766656]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-10 12:07:09.971: [ CSSD][1098766656]clssgmEvtInformation: reqtype (13) req (0xadd7b20)
2012-03-10 12:07:09.971: [ CSSD][1098766656]clssnmQueueNotification: type (13) 0xadd7b20
2012-03-10 12:07:09.973: [ CSSD][1098766656]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-10 12:07:09.975: [ CSSD][1098766656]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))
2012-03-10 12:07:09.975: [ GPnP][471957248]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-10 12:07:09.975: [ GPnP][471957248]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0xade1aa0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e1fdf67e-e0b9ca68-5971))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e0b9ca68-e1fdf67e-5976))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1758, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A2370613
2012-03-10 12:07:10.045: [GIPCXCPT][1098766656]gipcmodMuxTransferAccept: internal accept request failed endp 0xade0740 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-10 12:07:10.045: [ GIPCMUX][1098766656]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0xade0740 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))', remoteAddr '', numPend 02012-03-10 12:21:34.610: [ CSSD][4216872704]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331400094
2012-03-10 12:21:34.612: [ CSSD][4216872704]clssscmain: Environment is production
2012-03-10 12:21:34.612: [ CSSD][4216872704]clssscmain: Core file size limit extended
2012-03-10 12:21:34.675: [ CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-10 12:21:34.675: [ CSSD][4216872704]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-10 12:21:34.676: [ CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-10 12:21:34.770: [ CSSD][4216872704]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-10 12:21:34.770: [ CSSD][4216872704]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-10 12:21:34.771: [ CSSD][4216872704]clssscmain: Running as user ora11g
[ clsdmt][1123064128]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-10 12:21:37.926: [ clsdmt][1123064128]PID for the Process [6687], connkey 4
2012-03-10 12:21:38.276: [ CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-10 12:21:38.276: [ CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-10 12:21:39.171: [ CSSD][4216872704]clssscmain: initgminfo done
2012-03-10 12:21:42.815: [ CSSD][1144043840]clssgmclientlsnr: Spawned
2012-03-10 12:21:42.815: [ CSSD][1144043840]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-10 12:21:42.815: [ CSSD][1144043840]clssgmEvtInformation: reqtype (13) req (0x1a5a7160)
2012-03-10 12:21:42.815: [ CSSD][1144043840]clssnmQueueNotification: type (13) 0x1a5a7160
2012-03-10 12:21:42.822: [ CSSD][1144043840]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-10 12:21:42.872: [ CSSD][1144043840]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))
2012-03-10 12:21:42.873: [ GPnP][4216872704]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-10 12:21:42.873: [ GPnP][4216872704]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x1a5b10e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=c53aa194-7b930898-6687))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=7b930898-c53aa194-5928))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1728, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A3702366
2012-03-10 12:21:43.201: [GIPCXCPT][1144043840]gipcmodMuxTransferAccept: internal accept request failed endp 0x1a5afd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-10 12:21:43.201: [ GIPCMUX][1144043840]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x1a5afd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))', remot2012-03-11 11:17:15.417: [ CSSD][1249378048]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331479035
2012-03-11 11:17:15.418: [ CSSD][1249378048]clssscmain: Environment is production
2012-03-11 11:17:15.418: [ CSSD][1249378048]clssscmain: Core file size limit extended
2012-03-11 11:17:15.797: [ CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-11 11:17:15.797: [ CSSD][1249378048]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-11 11:17:15.798: [ CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-11 11:17:17.472: [ CSSD][1249378048]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-11 11:17:17.472: [ CSSD][1249378048]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-11 11:17:17.473: [ CSSD][1249378048]clssscmain: Running as user ora11g
[ clsdmt][1098090816]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-11 11:17:17.517: [ clsdmt][1098090816]PID for the Process [5960], connkey 4
2012-03-11 11:17:17.573: [ CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-11 11:17:17.574: [ CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-11 11:17:17.586: [ CSSD][1249378048]clssscmain: initgminfo done
2012-03-11 11:17:17.617: [ CSSD][1141242176]clssgmclientlsnr: Spawned
2012-03-11 11:17:17.617: [ CSSD][1141242176]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-11 11:17:17.617: [ CSSD][1141242176]clssgmEvtInformation: reqtype (13) req (0x129d5160)
2012-03-11 11:17:17.617: [ CSSD][1141242176]clssnmQueueNotification: type (13) 0x129d5160
2012-03-11 11:17:17.619: [ CSSD][1141242176]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-11 11:17:17.621: [ CSSD][1141242176]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))
2012-03-11 11:17:17.621: [ GPnP][1249378048]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-11 11:17:17.621: [ GPnP][1249378048]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x129df0e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=22574215-7bcb9bab-5960))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=7bcb9bab-22574215-5919))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x171f, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A2554722
2012-03-11 11:17:18.168: [GIPCXCPT][1141242176]gipcmodMuxTransferAccept: internal accept request failed endp 0x129ddd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-11 11:17:18.168: [ GIPCMUX][1141242176]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x129ddd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))', remot2012-03-11 13:50:45.588: [ CSSD][1847344896]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331488245
2012-03-11 13:50:45.589: [ CSSD][1847344896]clssscmain: Environment is production
2012-03-11 13:50:45.589: [ CSSD][1847344896]clssscmain: Core file size limit extended
2012-03-11 13:50:45.812: [ CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-11 13:50:45.812: [ CSSD][1847344896]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-11 13:50:45.813: [ CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-11 13:50:46.364: [ CSSD][1847344896]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-11 13:50:46.364: [ CSSD][1847344896]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-11 13:50:46.365: [ CSSD][1847344896]clssscmain: Running as user ora11g
[ clsdmt][1106819392]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-11 13:50:46.512: [ clsdmt][1106819392]PID for the Process [5598], connkey 4
2012-03-11 13:50:46.518: [ CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-11 13:50:46.521: [ CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-11 13:50:46.548: [ CSSD][1847344896]clssscmain: initgminfo done
2012-03-11 13:50:46.611: [ CSSD][1090939200]clssgmclientlsnr: Spawned
2012-03-11 13:50:46.611: [ CSSD][1090939200]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-11 13:50:46.611: [ CSSD][1090939200]clssgmEvtInformation: reqtype (13) req (0x196b6160)
2012-03-11 13:50:46.611: [ CSSD][1090939200]clssnmQueueNotification: type (13) 0x196b6160
2012-03-11 13:50:46.618: [ CSSD][1090939200]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-11 13:50:46.621: [ CSSD][1090939200]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))
2012-03-11 13:50:46.621: [ GPnP][1847344896]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-11 13:50:46.622: [ GPnP][1847344896]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x196c00e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=629302b2-9f0ad2aa-5598))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=9f0ad2aa-629302b2-5616))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x15f0, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A8205079
2012-03-11 13:50:47.159: [GIPCXCPT][1090939200]gipcmodMuxTransferAccept: internal accept request failed endp 0x196bed80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-11 13:50:47.159: [ GIPCMUX][1090939200]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x196bed80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))', remot2012-03-11 14:15:32.370: [ CSSD][2372304640]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331489730
2012-03-11 14:15:32.383: [ CSSD][2372304640]clssscmain: Environment is production
2012-03-11 14:15:32.384: [ CSSD][2372304640]clssscmain: Core file size limit extended
2012-03-11 14:15:32.933: [ CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-11 14:15:32.933: [ CSSD][2372304640]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-11 14:15:32.935: [ CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-11 14:15:48.413: [ CSSD][2372304640]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-11 14:15:48.413: [ CSSD][2372304640]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-11 14:15:48.421: [ CSSD][2372304640]clssscmain: Running as user ora11g
[ clsdmt][1119824192]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-11 14:16:21.102: [ clsdmt][1119824192]PID for the Process [7155], connkey 4
2012-03-11 14:16:22.219: [ CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-11 14:16:22.221: [ CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-11 14:16:27.367: [ CSSD][2372304640]clssscmain: initgminfo done
2012-03-11 14:16:43.377: [ CSSD][1140803904]clssgmclientlsnr: Spawned
2012-03-11 14:16:43.378: [ CSSD][1140803904]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-11 14:16:43.378: [ CSSD][1140803904]clssgmEvtInformation: reqtype (13) req (0x6964160)
2012-03-11 14:16:43.378: [ CSSD][1140803904]clssnmQueueNotification: type (13) 0x6964160
2012-03-11 14:16:43.389: [ CSSD][1140803904]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-11 14:16:43.554: [ CSSD][1140803904]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))
2012-03-11 14:16:43.555: [ GPnP][2372304640]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-11 14:16:43.555: [ GPnP][2372304640]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-11 14:16:44.146: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x696e0e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=0448e4a3-ad06465f-7155))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=ad06465f-0448e4a3-7132))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1bdc, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A8989982
2012-03-11 14:16:44.147: [GIPCXCPT][1140803904]gipcmodMuxTransferAccept: internal accept request failed endp 0x696cd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-11 14:16:44.147: [ GIPCMUX][1140803904]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x696cd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))', remoteAddr[ora11g@rac1 cssd]$
My question is:
Could any folk find out the problem that Grid becomes not running after install RAC database ?
Thanks. -
"cannot find file" after formatting and moving!!
Wanted to have iTunes library included in Time Capsule backup. So had to reformat external hardrives where all my songs are from Windows do OS. Copied everything on other HD, reformatted HD with OS, copied back all songs. HD still has same name "MUSIC", but iTunes cannot find files.
Changed in iTunes preferences the location of files to ensure it searches in the right place AND also replaced with text editor in "iTunes Music Library.xml" file all links with new address of HD (now after reformatting to OS I found it to be slightly different despite still same name).
But iTunes still cannot find the files. Everything is the same as before, HD name, directory structure, file names, etc. ONLY difference is it all is on "OS formatted" drive. Don't want to lose ratings and playlists of over 15,000 songs....is there still a solution?The moment I "drag out" the Tunes Library File, then there is nothing left there, and when I open iTunes it is empty.
That's as expected. That file is the database iTunes uses that keeps track of everything, so when you then launch iTunes, it's starting from scratch.
I can import the Playlists from the XML and they do appear, but still no songs, all is empty. If I try to reimport from the new location, then they "do not fit into the playlists", meaning ratings etc. are lost.
Then you apparently didn't get the XML file edited properly; it's not easy to do.
Why does the simple location function in iTunes Preferences not work?
It does, when used as designed. The preference is where new additions (imports & purchases) will be stored. It does not change the location for existing files.
Put the original library file back. Then launch iTunes, Get Info on a representative track, and look at the path to where it thinks the files should be and compare that to the actual path. Any difference at all will break things. If there are differences (drive name slightly different, any difference in folder names/structure, etc.; letter case counts), try correcting them in Finder and see if that gets things working again. If not, then you'll have to use the Add to Library command to get back your tracks which will lose all your ratings, etc.
Where does iTunes save the links to the original files so it can simply be changed?
In the iTunes Library file, which cannot be manually edited. -
Cannot log in after archive and install
Hello, everyone. ive been searching the support pages of the apple site for an hour and i cannot seem to find a resolution to this...
I just peformed an archive and install ad now i cannot log in. i think this happened once before and i called apple support and i was told to log in as root. the problem i am having is that the login window does not give me the option to change the user field, it only allows me to type a password. every time i type my password, the login screen shakes. so even if i wanted to type root into the user field, i cant. any suggestions would be greatly appreciated. thank you.
p.s. i was running tiger but lost my tiger disc so i am using the disc that originally came with my g5 which has panther on it...
daynaHi, Dayna.
1. Be sure the Caps Lock key isn't active: passwords are case sensitive. You may see an exclamation point on the right side of the password field if the Caps Lock key is engaged.
2. There was a similar problem if one performed an Archive and Install (A&I) of Jaguar (10.2) over Panther (10.3): see "Can't log in after installing Mac OS X 10.2 over 10.3." I've not heard of a similar problem with performing and A&I of Panther over Tiger, but it may be related. However, before trying the advice therein to perform the A&I without selecting "Preserve Users and Network Settings" you'd need to have a backup of your data, otherwise you risk losing everything in your account. IMO, the most expedient solution would be to buy a replacement Mac OS X Tiger disc. If there is an Apple Retail Store in your area, that would be the quickest place to purchase one.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X -
Cannot open Editor after installation and sign in to Adobe ID
I installed elements 13 on two computers. Then as directed, I signed up for an Adobe ID.
Elements works fine on one computer, but not on the other. On the one with the problem, I can access the organizer and use the organizer, but when I try to open Editor, I am asked to sign in with Adobe ID to activate the software, which I have done many times but still nothing happens. I signed in to check my Adobe account and I have a valid account, but still cannot open the editor. It just keeps asking me to sign in, which I have done many times and still cannot open the Editor.Have you managed to update to 13.1 by loading the organizer, going to the Help menu and selecting Updates.. ?
The sign in process can be blocked by your system, you can try disabling your firewall to see if that is blocking you.
The following document is for CS but contains information that will affect elements too.
Sign in, activation, or connection errors | CS5.5 and later
Recently, an add on has been found to block the Adobe access - please see this thread.
How do I get past the required "sign in" requirement on Elements 12 EDITOR after entering my password?
Good luck
Brian -
Nomad MuVo will not play after deleting and re-installing so
I hope this question has not been answered anywhere in the forums and I have missed it. If so, I am sorry. I have looked and looked at all the discussions, and nobody's advice has been able to fix my player yet. This is the second MuVo I've had that has had this problem. I deleted songs from my player, but now when I try to play the new songs I put on the player, I get nada. I press the play button, and as soon as I let go of it, it turns red. Won't play. The songs are definitely on the player, and I can play them on my computer, but not through the MuVo. I have tried everything suggested on the Creative support site, and everything people have suggested through this forum - nothing works. Creative says my product has reached the "end of service" life and will not give me customer support. Might be time to buy an ipod, but I thought I would give this one more try. Please help!!
Sorry, should have been more articulate in my description.
During the installation of Livetype, after choosing the destination for livetype to be _Application support_ and starting the installation, the program goes up to 20% during the writing files procedure... and stops.
Says Please try install again.
Maybe you are looking for
-
Can not refresh page after save properly(When not saving master record)
I am using jdeveloper 11g R2 (11.1.2.3) JSF Facelet In some use case I have Address as master table and Person as detail table For some business reason I need to don't save same addresses eg: If +1 Test St+ is in database already and new user coming
-
Exporting BOXI Report to Excel
Hi, When I am exporting my BOXI report to Excel, formatting is not being exported as is. I had formatted BO report to print in Landscape. When I export to pdf, it working fine,but when exported to Excel, it is not priting in Landscape. Is there any w
-
Hi Guru's, It is a STO process, I have 2 plantS MKTO and MPTO, MKTO acts as a Warehouse and MPTO acts as manufacturing plant, Materials in MKTO are Re-order point planning, when ever stock is below re-order point and when we run MD02, i
-
How do I set up a Laser Jet 4000 to work wirelessly?
How do I set up a Laser Jet 4000 to work wirelessly? I followed the prompts but don't know what IP address to enter. Is it 192.168.1.1 or is it unique to us? We have Verizon FIOS. Where can I find the best ongoing support online? In looking a
-
A friend gifted me a copy of The Amazing Spider-man, I redeemed the code, now it tells me I can't download it onto my Ipad (1st Gen) because it does not have a gyroscope. Is there a way for my friend to get his money back, or a way for me to download