Video capture does not work Java 1.5 or 1.6
I could not run jmstudio on 1.5, but on 1.6 I could, and jmregistry says there is a device with a Locator "v4l://0" and jmstudio can display the video. Yet my old program that worked with Java 1.4 can not now capture the video any more, createDataSource(locator) in the code:
locator = MediaLocator("v4l://0");
source = javax.media.Manager.createDataSource(locator);
throws NoDataSourceException, that says something about "Could not configure video device". Is the code bad? Or is there something other broken? JMFHOME is set correctly.
Where is your jmf.properties file? Do you have the performance pack installed?
Does JMStudio work. (if you're on linux w/ java 5.0 use: java -Dawt.toolkit=sun.awt.motif.MToolkit JMStudio)
My bet is that you don't have jmf.properties in your current dir or the camera hasn't been added to your properties.
Another idea:
try this before your code:
try {
Class.forName("V4LAuto").newInstance();
} catch(Exception e) {}in order to autodetect the camera.
Peace
Similar Messages
-
Using FW800 as 'scratch' disk for SD video capture does not work?
New iMac buyers beware - if you plan to capture video via FW400 (most SD camcorders do), you cannot capture directly to a FW800 disk. Workaround is to capture to your Mac HD first - there is no problem there.
When my FW800 external disk is mounted and I connect my camcorder via FW400, the FW800 drive keeps unmounting/remounting and is unusable. I noticed on Profiler that iMac groups the firewire devices in the same category (for FW800 and FW400) implying the bandwidth is shared and not independent.
I should have bought the Mac Pro.
Any suggestions?Looby - yeah, I tried that - works for DV/DVCPRO NTSC (max write of 4MB/sec) but not for uncompressed 8-bit (max 21.52MB/sec) - I drop frames.
George - Yes, using FCP. Maybe, but even without FCP launched, and my OWC 2 drive external on FW800, when I turn on my camcorder on FW400, the drives unmount/remount continuously. Hmmmm... maybe it's the OWC? See below...
Noiseboy - Hmmm... interesting. Is your "lacie 250 triple" a single drive or multiple all in one chassis? My OWC is 2 drive RAID chassis configured as two independent drives - maybe that is the problem. I am going to try removing one drive.
Anyone else buy a FW800/400/USB2 RAID system in hopes to increase thruput? With the OWC I get a whopping 68MB/sec RAID-0 vs. 66MB/sec non-RAID. Bummer. Those advertising people should get what they deserve!
Thanks everyone! -
Installed Premiere Pro CS4 but video display does not work?
I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
RonI would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2 -
Satellite 1800-100: video-out does not work
He,
I just installed windows XP on my old Satellite 1800-100, but now my video-out does not work anymore. So I just downloaded the latest driver, but there's no way I can get it installed. According to Windows the new driver isn't newer, so it won't let me update it. And when i try to unistall the display driver, I have to reboot before it takes effect, and wile rebooting it automaticly installs the standard driver again.
Can anybody help me?
Greets,
DaanHi
Do you mean TV- out port or monitor port? As far as I know this unit is preinstalled with WXP Home and all drivers can be also used for WXP Pro.
Did you preinstall your own OS (non recovery image)? -
Video Filter does not work.
Hello.
I have been using Final Cut Pro 4 for a while and it worked fine before. But recently, any function of Video Filter does not work. I apply them to the clip, but the image does not show any changes on Canvas.
Is the software's problem?
Thanks in advance.
YingFor a reason unknown to me, FCP's preference files (there's 3 of them) will sometimes become corrupted and need to be trashed. Usually the symptoms are things just not working as they did earlier, or weird issues like the 3 Way Color Corrector looks different than before ... stuff like that.
FCP Rescue is a freeware app (yes, you'll need to download it) that will create a backup set of preferences, thereby retaining all of your settings. Then when (not IF, but when) FCP's preferences become corrupted, you can run FCP Rescue to replace the bad set with a fresh new set.
Otherwise you can delete the files yourself (make sure FCP isn't open at the time) and the next time you launch FCP, it will revert back to the factory settings.
-DH -
After upgrading to Lion, Image Capture does not work, even though it is intel software. Gives error 9931. What gives?
Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
Didn't used to be this way before Lion/10.7.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS. -
Audio in video messages does not work
When I record a video message for someone, the audio does not work properly. It either doesn't work at all (silence is recorded), or cuts out after a 1-2 seconds. The problem seems to be confined to the MP4 video/audio encoder used by Skype for video messages.
My webcam (Logitech HD615) works properly when used for Skype calls (including the built in microphone), and when used in other applications. With other applications, I can also record videos and the audio is captured and encoded correctly. Although the problem does not seem to be the webcam, I have re-installled the webcam drivers and I have tried changing USB ports for the webcam.
I have re-installed the latest version of Skype and verified that Windows has the latest updates (I'm using Windows 7). I have tried re-booting a number of times when debugging this issue.
I have looked at the mp4 file that's created in the temp folder when Skype records the message - the audio is missing/broken regardless of what player I use. This, and the fact that the webcam works makes me believe that the problem is in the Skype use of the audio/video encoder, or the encoder itself.
Any ideas on how to solve this problem?
Thanks,
K.
Solved!
Go to Solution.When you change the USB ports, make sure not to use USB 3.0 ports. I had a very similar issue with Logitech c920 webcam. Changing the port to USB 2.0 has solved the issue.
http://community.skype.com/t5/Windows-desktop-client/No-sound-on-video-messaging-playback/m-p/274382... -
Quicktime plugin for screen capture does not work in flash player 11.2
Hello,
I have created a quicktime plugin (it is .component file) for screen sharing purpose.
I have used quicktime framework for that. plugin is detected in flash player.
This plugin is working perfectly for flash player 11 and below.But,
It does not working in latest flash player 11.2.
I have seen following error on console -
Google Chrome Helper EH[240:e92b] *** QTCaptureSession warning:
Session received the following error while decompressing video:
Error Domain=NSOSStatusErrorDomain Code=-8974
"The operation couldn’t be completed. (OSStatus error -8974.)".
Make sure that the formats of all video outputs are properly configured
Note - Compression format used in plugin is kBMPCodecType.
Please, help me.The issue ended up being the change in resolution to my external monitor. Flash was unable to detect the proper coordinates of the color I was trying to select because I was running my monitor in HD mode rather than selecting an actual resolution from my monitor preferences. Changing the settings to an acutal resolution, instead of generic "HD mode" fixed the issue.
-
My video zoom does not work on my iphone or ipad after IOS 7.0.2 update.
After updating iPad and iPhone 4S to IOS7.0.2 the video zoom function does not work. I have also lost the function to zoom on video playback.
Is somebody from Apple monitoring these forums? I do have the same problem, i just recently noticed that the zoom in my video camera is no longer available since I upgraded my 4S iPhone to the newest version.
-
Google talk audio/video plugin used to work fine on Firefox 3, but does not work anymore on Firefox 4. Every time I click on the video chat icon on google talk, I am asked to install the plugin, even if I have already installed it before. The plugin works properly on the latest version of IE on the same PC.
Thanks for your help. I do not want to switch to Chrome or Opera, but if this bug is not fixed, I will have to.Not sure if installing IE 9 did it or not but I now see the camera in IE, FF and Chrome. Could be Facebook fixed the problem also.
Thanks for the reply.
George -
I have a spare Mac Pro here so I decided to remove the video card and put it in the one I'm using. Both machines were purchased in '09 and use the same video card (ATI Radeon HD 2600). The two monitors I have hooked into the original video card work fine but the monitors I hooked into the newly placed video card are not working. Under the About This Mac specs >> PCI cards it shows up and says driver is installed. Is there anything special you need to do to get a second video card to work?
Thanks.I tried the SMC reset. I removed the card and reseated it. I'm seating it in slot 2 because that's the only other one that is x16. The other slots 3-4 are x4. Still nothing is showing up. When I go to System Preferences >> Displays >> Detect Dispalys nothing happens. The two displays plugged into the original video card work fine but the newly installed on does not show up. Here is what the Mac Info is detecting. Maybe this makes sense to someone. Not sure what MSI is referring to and the second video card is reading as "display" instead of "ATI Radeon HD 2600". Link speed on the second card is half that of the original.
About This Mac >> More Info >> PCI Cards >> Slot-1
ATI Radeon HD 2600:
Name: ATY,Lamna
Type: Display Controller
Driver Installed: Yes
MSI: Yes
Bus: PCI
Slot: Slot-1
Vendor ID: 0x1002
Device ID: 0x9588
Subsystem Vendor ID: 0x106b
Subsystem ID: 0x00a6
Revision ID: 0x0000
Link Width: x16
Link Speed: 5.0 GT/s
About This Mac >> More Info >> PCI Cards >> Slot-2
display:
Type: VGA-Compatible Controller
Driver Installed: Yes
MSI: No
Bus: PCI
Slot: Slot-2
Vendor ID: 0x10de
Device ID: 0x0393
Subsystem Vendor ID: 0x0000
Subsystem ID: 0x0400
Revision ID: 0x00a1
Link Width: x16
Link Speed: 2.5 GT/s -
Tecra S1 video out does not work
Hi,
I tried to connect my TS1 via cinch to a beamer. Unfortunately because of other reasons I can not use VGA.
However I do not get any signal at all. I tried nearly everything. I installed Windows XP with Toshiba Recovery CDs again, but it does not work either.
Is there anyone knowing what to do?
Best wishes,
Markus924hi Markus924,
do you have a picture on the internal lcd?
via chinch to a beamer - this wont work...
you get a pal/ntsc signal from this connector.. i am not sure if your beamer can handle this sort of signal...
take a vga cable to try *and* install the "fn-f5" tool from toshiba to switch the picure to external display. -
IPhoto video clips does not work in iMovie
I just installed Leopard and ilife '08 into my MAC.
The video clips from my iPhoto library are not shown properly in iMovie. I'm only able to hear the sound of the clip but unable to watch it. when i skim through the clip, i don't see anything on the viewer, i just hear skimming through the sound. when i tried to play the clip, just the sound began to play. even the thumbnail does not show a picture of the clip, its just grey.
Can someone help me please???Format: Apple OpenDML JPEG, 640 x 480, Millions 16-bit Integer (Little Endian), Mono, 44.100 kHz
As post in your other topic, this looks like it should be compatible.
I've captured video from my built-in isight camera in my MacBook. when i was trying to skim through or play the video clip in iMovie, the clip didn't appear in the side viewer. I am able to hear the voice of the clip and even see the thumbnail clearly but not in the viewer.
This sounds like part of your original problem. Suggest you try importing the same files to an alternative platform and/or possibly an alternative user account to see if the problem is "global" on your system and "limited" to your system only. Suspect you may have a bad install or corrupted application that may simply be generating unusable "thumbnails" here. You basically need to isolate the problem to see if it is in OS and/or application. For instance, did you update to iMovie v7.1 before or after installing Leopard or better yet, have you installed all of the updates? -
Macromedia Flash MX Professional 2004 Video Update does not work
When I import an MPEG video into Flash MX 2004 Pro, it works
every time except when I try to edit the video and create mulitiple
clips. If I try to create clips, it lets me go through the import
process, right up to when I click Finish. When I click Finish, it
just goes back to the first Import Screen (where it asks whether
you want to import the whole video or edit it first). It does not
import the video at all. This seems like it is an obvious bug. I
have tried installing the Macromedia Flash MX Professional 2004
Video Update and that does not help. I'm on a Windows XP machine
with Flash MX 2004 Pro v. 7.2. Thanks in advance for any help.
KurtI'm on a Mac and don't had this problem. But I do watch for
video issues on this site and haven't seen this – I might
have missed a few, but most Flash users are on Windows so I think
it would be common if it were something wrong with Flash in
general.
Then again, what do I know? Because the more I'm thinking
about it the more I think I might have had this problem. But I
really can't remember. And sorry to say the solution was to not use
the import function to edit my videos.
You also might want to just see if it is the format of the
file you are importing. Perhaps a different source will work
better? I'm just grasping at straws here.
If you have many of these to do and a budget I suggest
getting a third party tool like Squeeze. Otherwise if you have some
third party editor you might want to use that.
Good luck! -
LR5 Tetherd Capture does not work
Im an event photographer and just upgraded to LR5 and am having nothing but trouble with the tetherd capture. I am using a Nikon D800e on a PC windows 8 and after a few shots it quits working. Anyone have a solution as it appears Adobe does not.
Ok, received the recovery media today. 24 hours, it was fast!
Did a factory reset and all is working now! (at least all I could test this evening) Apparently I had all the wrong software in my Sprout.
Many thanks for all the input.
NC
Maybe you are looking for
-
Issue when uploading Sales data from DSO to Cube.
Dear All, I have an issue when I am uploading Sales data from DSO to Cube. I am using BI 7.0 and I have uploaded all sales document level data to my DSO. Then I use a transformation rule to calculate the Sales Value when I am doing DTP to cube. Cu
-
Hi Everyone. I've got some lovely XML IDocs. I'd like to read them into the IDOC Class Library and send them to SAP with JCo.......... But I can't get some simple code to parse the XML. I've been sending XMLs to SAP for a long time and they were al
-
Archive & Install - Possible with error ' the underlying task reported fail
I have tried to repair my drive in disk utility however i get a error message ; 'the underlying task reported failure one exit' My question is , am i able to do a archive and install?? im worried about doing a reformat as i have only just put new pho
-
On Facebook I'm able to delete 1 of the duplicate posts. On Ebay after I click "buy now" & go to the next page I find I have 2 of the same item to pay for separately. This happens about 50% of the time.
-
How to get the RGB value of each pixel of a hole image?
Hi, I'm trying the get the RGB(between 0 and 255) value of each pixel of a hole image. I writte this code: public void convertImage() int w = bufferedImage.getWidth(); int h = bufferedImage.getHeight(); int[] rgbs = new int[w*h];/* cre