Video Files absent from Streming after restart

If I connect to an iTunes library that has video in it (pod casts/movies/TV Shows) after I restart the aTV all the videos go missing from the play lists. I have to turn off itunes, disconnect from that iTunes streaming computer and reconnect it to get the videos back. This also happens when I add content to an iTunes library that is already attached to the aTV as source. Some content shows up, some content doesn't. This is uber frustrating. Has anyone else seen this and figured out a way around it?

Hi. Did you ever resolve this problem? I'm having the same issue and can't find a resolution.
Thanks!

Similar Messages

  • Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop  After restart error message appears:  - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

    PROBLEM: Cannot print from Photoshop
    After restart error message appears:
    — “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
    • All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
    The printer printed fine until about 2 weeks ago when this error message appeared.  Printing continues from Pages, I-photo, preview etc. —  only Photoshop fails.
    The printer has been turned on and off, as have open documents been closed and open etc..   Preferences reset.  Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
    Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
    Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
    Attempting unsuccessfully to print to Epson 3880
    What Adobe support will be of help.
    Robert Darling —  2/19, 20, 21,22,23/2015

    Probably best to ask in Photoshop General Discussion
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • I am not able to add video files to my itunes after installing itunes 10.7

    I am not able to add video files to my itunes after installing itunes 10.7.0.21

    I Have been using, Ipad for only around a month or so (Ipad 2), and it was only yesterday that i tried to use the Itunes. I first downloaded the latest itunes (10.7.0.21), and took backup of all my Ipad data.
    After this, I wanted to add some video to my ipad, as it was essential to add the same to My itunes first, I roceeded to do just that. I went through this command {File - Add File to Library}, and then went on to select the Video file. There's just a flicker, and then nothing happens at all - the itune screen remains, and there is no error message too. Whereas, I can easily add Audio Files.
    After this, I even downaload the latest Quick time (7.7.2), as I had read somewhere that the same is necessary. When I tried to open the Video file in Quick time, it did not open. After that I downloaded the codec DivX and DivX player. Though the Video plays in DivX, it refuses to open in Itune and does not play properly in Quicktime (slider moves, but sound and video is not there).
    Frankly, I am utterly confused.
    Regards, Shekhar

  • Using the new iPad, what's the best way to watch video files (away from home) which are stored on a NAS (WD My Book Live)? Any help would be appreciated!

    Using the new iPad, what’s the best way to watch video files (away from home) which are stored on a NAS (WD My Book Live)?  Any help would be appreciated!

    Before you go, move the files to I tunes and sync them down.  There is no viable way to stream from your nas drive to the pad.

  • How do I transfer video files shot from my camera (Canon 5DMk2) which is in .MOV format into iTunes ?

    how do I transfer video files shot from my camera (Canon 5DMk2) which is in .MOV format into iTunes ?  My photos and video files are first imported into Aperture then synced with iTunes. However, itunes does not capture the Video files but uploads the phtos from Aperture during sync.
    I tried dragging the video files into iTunes but it still would not be captured into iTunes ?
    Appreciate any help on this. Thanks

    Open them in Quicktime Player 10.1. Then, use Quicktime's Share menu > iTunes.  That will create an iTunes compatible version and automatically load it into your iTunes movie library.

  • How to transfer videos, files, photos from iPhone to mac

    how to transfer videos, files, photos from iPhone to mac, how can the bluetooth transfer be done

    dssheorey wrote:
    how can the bluetooth transfer be done
    You don't. File transfer, by Bluetooth, has never been supported on any iPhone. To import pics/videos in your camera roll, read here:
    http://support.apple.com/kb/ht4083

  • How to stop youtube videos from playing after restart

    every time I restart firefox (currently 24.1.1 or 14.0.1) any tabs with youtube videos start playing and I have to wait until after restart is complete before I can find it/them.
    is there a way to stop this?

    I don't know of a way to stop auto-play on restart only. There are some extensions that can stop auto-play in general (i.e., all the time). I haven't tried any of them myself, but it looks as though these might help:
    * [https://addons.mozilla.org/En-us/firefox/addon/smartvideo-for-youtube-mytube/ SmartVideo For YouTube]
    * [https://addons.mozilla.org/En-us/firefox/addon/stop-youtube-autoplay/ Stop YouTube Autoplay] (updated version not yet reviewed)

  • After running Magician app many files where deleted and after restarting I received the language portion of when you first start to set up a new Mac

    After running Magician app many files where deleted from my computer, nothing new,  After restarting I received the language portion of when you first start to set up a new Mac. Except after the language portion it went immediately to 5 options; install back-up from Time Machine, Disk Utility, Restart from start up disc, etc. I tried doing them all. Disc repair, rebooting from TM, but I don't save everything from TM I use an external HD for backup. None of those options are working for me. Now I get a grey screen with a flashing globe for so many minutes then a folder appears with a ? In the middle of it. What am I to do? Can anyone help me, please!!!

    I appreciate the extra forums you suggested I look into. I ended up forceing a Safe Mode reboot on my Mac  holding the Shift key. I let the installation process commence and I'm back to the way things were.

  • Updated to 7.0 and lost video file purchased from iTunes

    I updated my iTunes today and a video file I purchased from iTunes in February is gone. The file is still on my iPod because I have not sync'ed it yet. I know that once I do the file is lost for good. Is there a way of preserving it and putting it back into iTunes without repurchasing it?
    Thanks,
    Dotdan
    AMD 64 Bit   Windows XP  

    This happened to me, but I lost all my purchased music files when I downloaded itunes 7. I should of waited, so all the bugs could be worked out, cause I lost over $100 worth of songs, and have no idea how to get them back. Anybody?

  • Can I pull iWeb files back from MobileMe after hard drive failure?

    I suffered a recent hard drive failure and while I had my pictures backed up I didn't have my iWeb files back up and don't want to start the website from scratch if at all possible. Is there any way to save the files I uploaded to MobileMe back to my computer so I can continue my website?

    Welcome to the Apple Discussions. Chapter 2.3 of the iWeb FAQ.org site has tips on using some of the existing image, audio and/or video files in the published site in the reconstruction of the site.
    OT

  • Too much rendering of video files imported from iMovie

    I am new to mac so maybe someone can help me out. I imported all my video to my hard drive from iMovie. When I use these files on FCE it always has to render, there is no sound. Just by putting a video clip on the timeline with no effects or anything, it always has to render and there is no sound. When i import video files from another hard drive imported from a different program and i drop it to the timeline, it doesnt have to render and i do hear the sound. How can i fix this?

    Hello and welcome to the forum
    Listen to Tom; he's one of the chief gurus and most frequent contributors to this forum! Here's how to export your iMovie footage so you can easily use it in FCE:
    In iMovie, select Share>QuickTime and choose Expert Settings. On the next screen select Export: Movie to QuickTime Movie and click the Options button. In the resulting Movie Settings window, select DV/DVCPRO-NTSC for video compression and Linear PCM Stereo @48kHz for Sound Settings. Uncheck the Prepare for Internet Streaming box.
    Realize that you'll be making an entirely new movie file, around 13GB per hour of standard def footage. Hope you have a big honker of a hard drive!
    Good luck!

  • Fonts missing from CS6 after restarting laptop

    I've installed (and reinstalled) open-type Stone fonts on a new laptop with Windows 7x64 and CS6.  After restarting the laptop, why are the fonts gone from the list of fonts available in CS6?  I have to reinstall them each time I turn the laptop on.

    Nothing to do with Adobe. Some security tool or your system restore is removing them to retain a specific state or you do not have proper permissions to make permanent changes on your system in the first place.
    Mylenium

  • Opening video files transfered from phone to pc

    transfered video from phone to pc and downloaded pc suite to pc but when i click on video file i get a message "cannot open file"

    Which phone? Which version of PC Suite? Did you use the PC Suite "View multimedia" app/feature or some other app to view the videos?
    What is the video file format (at least the file extension, such as .3gp, .3g2 or .m4a or whatever)?
    What if you try some other video player like Apple QuickTime?

  • 5th gen ipod, video file import from P.C

    Pleeeeeeeese help.
    Have followed help advice to import video file from my p.C to Itunes, however nothing appears to be imported!?!?
    Any ideas peeps.

    Hey Littsy,
    Are you seeing any error messages?
    Click on File(inside iTunes)> Add File to Library>select the file.
    What type of video file are you trying to add to itunes? Where did the video come from?
    Jason

  • NTFS issue: video files copied from Arch won´t load on other devices

    Hi!
    I'm having this odd issue... I'll start from zero:
    I have a 1TB external HDD (usb3, iomega). It has an NTFS filesystem since it was always my Windows backup drive. Since I've buyed a Digital TV that supports video playback from external drives and almost any video format, I'm using it as a movie/etc device. Previusly I had installed Ubuntu... but since I've installed Arch, any video file that I copy to the external HDD won't work on the TV. When I try to reproduce those files copied from Arch on the TV it hags and reboot several times.
    I don't know where to start. I've installed ntfs-3g-fuse package for mounting r/w without root privileges... and my user is part of "disk" and "storage" group.
    Any ideas?
    PD: Sorry, I'm not an english speaker... If it's not legible I'll try to write it again.

    Usually crash on access indicates damaged filesystem. For example drive was removed without umount-ing it.
    For start you can run file system check on your drive from Windows - "chkdsk /f X:"
    You also can run it as "chkdsk /f /r X:" to check for bad-blocks (though it is not so critical now days).
    Keep in mind - NTFS is proprietary system so 'ntfsfix' from ntfsprogs in Linux could help sometime but do not hold you breath with it.
    Better find Windows for Windows filesystem.
    Or you can just recreate files system from scratch with mkntfs - all data on the drive will be lost, obviously. But you do not need windows for that.
    Regards,
    Eugene.

Maybe you are looking for

  • Send a mail thro abap report

    Hi,    i am using SO_NEW_DOCUMENT_ATT_SEND_API1 function module to send a mail of my text file to the customer. My problem is, the attachment file alignment is not correct. that means it is not aligning to the left or right. i am using tables paramet

  • Dv6095 motherboard

    I need to replace the motherboard on my dv6095 and this needs a 443774-001  - can anyone tell me if there is difference between this board supplied for the US market compared with one for the UK?    I can obtain one from the US which is an updated ve

  • HFM deployment issue on EPMA - The application already exists

    The first time I deploy the HFM application everything works fine until I try to redeploy after deleting the application. I have tried registering the application to SS and then try deleting it from there but that does not work. Here is my deployment

  • Form based authentication HTTP 403 access forbidden in WL 8.1

    Hi there.. I found following message posted in April-2004 by Sandeep very useful. I also ended up getting the following HTTP 403 Forbidden access error while using Pageflow controller and Form based authentication. I noticed 2 things. If you have a n

  • Graphics rendering

    pardon the stupid question, but . . . when i import a photoshop graphic (pict file, 720x480) into a FCP 3.0.2 sequence which is set up as a DV-NTSC sequence, 720x480; then 2x click it so it loads into the viewer, then drag it onto the timeline, it ha