Video on my4s no longer displays th tv logo and can't connect to all tv help?
What to do to restore all tv connect?
I'm confused. Are you talking about connecting an iphone to a tv using a cable converter on the iphone and wires to a tv?
Similar Messages
-
My printer menu is no longer displaying in English. I can't read the display to try to troubleshoot
My boss' printer HP Color LaserJet CP2025 - menu no longer displays in English. I can't read the display to troubleshoot or reset. Is there another way to change the setting?
I have not verified these steps, but this is what I located:
A. To change the display language back to English, please perform the following steps:
1. Press the right arrow 2 times, press the OK button (you should be in the System Setup menu).
2. Press the OK button again (you should be in Language).
3. Press the right arrow until you see something that may be English, press OK button. The menu is a continuous loop, so if you miss it the first time the option will return.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you. -
The screen which comes up no longer displays a playlist column and when I hit the plus sign and choose new playlist the screen doesn't display the narrow right side column for a new playlist. Does this have something to do with the new iTunes version I installed?
iOS: Unable to update or restore
-
My ipod is displaying the itunes logo and a usb cord. I've tried resetting it but it didn't work. Any suggestions?
Your in DFU mood do this:
iOS: Unable to update or restore
Follow these steps to perform a recovery-mode restore on your iPhone, iPad, or iPod touch
You may need to perform a recovery-mode restore if you experience any of the following situations on your iPhone, iPad, or iPod touch. The device:
Displays the Apple logo with no progress bar or a stopped progress bar for over ten minutes.
Restarts but never displays the Home screen.
Is no longer recognized in iTunes after an update or restore did not complete.
Automatically goes into recovery mode after having an issue while installing an update or performing a regular restore.
How to perform a recovery-mode restore
If your iPhone, iPad, or iPod touch is already showing the "Connect to iTunes" screen, please go to step 5.
Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
iTunes should automatically open and display the following message:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
Use iTunes to restore the device.
If you see the Connect to iTunes screen but the device does not appear in iTunes, follow these troubleshooting steps if you're using a Mac, or these steps for Windows computers.
Additional Information
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. -
Since updating my airport utility app to iOS 8, it can no longer see my base station and will not connect to wifi. My son's 4s with an older version of the app sees it and connects fine, so I know it's working. The internet works fine for everyone else in the house but my
Please take a look at this Apple support document to see if it help solve your issue:
iOS: Troubleshooting Wi-Fi networks and connections
If this does not help, we would recommend that you post in the iPhone community support area, since you have an iPhone / iOS issue. The link is just below.
Using iPhone -
Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?
Read this
http://support.apple.com/kb/ts1583 -
hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success anyone got any idears?
Try here:
iOS: Not responding or does not turn on -
texmate and git 1.8.4.2 won't work on OS X Mavericks. I've downloaded them repeatedly and the following errors display "Textmate is damaged and can't be opened" and Git states "can't be opened because it's from an unidentified developer". Please help!
MedlockDustin,
for TextMate, you’ll need to download TextMate 2.0 alpha, since earlier versions of TextMate aren’t supported on Mavericks. The file will be named “nightly”; save it to your desktop. Once the “nightly” file has finished downloading, rename it to “TextMate.app.tar.bz2” — that will give it the “BZ” icon on your desktop. Once it’s been renamed, you can double-click on it, and TextMate.app will appear on your desktop. Use your administrative login to move TextMate.app to your Applications folder.
Regarding the “unidentified developer” message displayed by trying to open git 1.8.4.2, please refer to this Apple page for the workaround. -
My computer no longer find my iPhone wirelessly, I can pnly connect to my personal hotspot my using the cable.
There may be something in the following "Troubleshooting Personal Hotspot" that will help: http://support.apple.com/kb/TS2756
-
how can i fix my iphone 3g if and only it displays the apple logo when it is connected to its charger but it displays nothing when the charger is removed?
Plug it into a wall outlet and leave it plugged in for approximately 20 minutes.
Then try a reset by pressing and holding the home and power buttons for 15-20 seconds.
Does the device power on at this point? If not, the battery or logic board is gone.
Take it to Apple for evaluation.
It may be worth replacing the battery, but I personally wouldn't spend the $149US for an Out of Warranty replacement on a 3+yr old device. -
My iPod was stolen a long a few months ago and I've given up all hope in finding it. I have never purchased item on iTunes, and I think the iCloud might have been deleted. It doesn't show up in "My products" too and I tried Find My iPhone.
No. Apple won't do anything without a court order. Since it wasn't upgraded to iOS 7 before it was stolen then there's nothing you can do. You could file a police report with your serial number but there may be a small chance.
-
my iphone 4s said it needed updating to ios7.2 and so far its displaying the itunes logo and saying plug into itunes so i tried updating with itunes and it keeps saying it has failed (3194)
Hello Amz_Bajwa,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694#error3194
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
Best of luck,
Mario -
My ipod touch screen displays the itunes logo and connecter wire
my ipod is locked and i cannot get it to work. on the screen it displays the itunes logo and the connecting wire. i have tried updating, restarting, restoring, and nothing works. looking for a little help.
Have you tried placing the iPod in Recovery mode and then restoring via iTunes?
In the future, say what happens when you do various things, saying it does not work provides no information. -
I'd tried to restored my iphone but after that its just display the apple logo and nothing to work on?
Hello there, Shaneol10.
The following Knowledge Base article provides some great steps for troubleshooting your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
If the iPhone still isnt recognized, refer to these documents (depending on which Operating System you are using)
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
When I conect my iPod touch to my iMac. The screen on the iPod touch displays the iTunes logo and a picture of a USB connector. The iPod touch seems to be frozen in this state. can anybody help with this problem?
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Maybe you are looking for
-
I have a Flash website with a contact form that has all the standard input fields and one combo box with some selections pertaining to how a viewer found the site. When I set the tab order, if I inlcude the combo box, the tab function works fine unti
-
Server Problem, thanks for your help
Hi there, We have 2 informix database instabce running on same machine. Call devdb and systestdb. The structure are same. The question is, when I run application on systestdb, it works. But if i run same app on devdb, seems nothing happen. I do belie
-
X Standard and missing maker files
I have installed X Standard, using Windows 8.1 and Office XP. I cannot create documents as the "missing maker files" error comes up. I have updated X (I think) to no avail....help please!
-
Please tell me about this alert in udump Dump file /orahome/PROD/db/tech_st/10.2.0/admin/PROD_dbprod/udump/prod_ora_21580.trc Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production With the Partitioning, OLAP and Data Mining options O
-
Cut, Copy and Paste accross applications 3.0
According the promotional information, you are supposed to be able to cut, copy or paste across applications? Does this mean ALL applications or just a few? I was unable to "copy text" from a text file in "QuickOffice" and paste it too a Craigslist p