Video Pixelation occurs while recording the video using flash player

Hello,
I am recording the video using flash player 9 ( using the
flash media server 2.0 on the back end). Everything used to work
fine in the past. The quality of the flv video was good. Now
suddently, I have started seeing the pixelation in the recorded
video (very poor video quality). Nothing has been changed in the
code. However on the server side, I am not very sure if there is
any windows update has taken place and have caused the problem with
the codec on server.
However my understanding is that when we record the video
then flash player use its own codec not the flash media server.
Can any one help me on how I can get rid of pixelation
issues?
Thanks for your help.
Best Regards
Pradeep

Hello Melissa,
I might not be understanding the question right, but if you
are using Flash
Player 6, and the Flash Player 6 video player component, you
can resize the
video by resizing the component on the stage (just drag and
make it larger).
Let me know if that works for you.
Jesse H.
Adobe Community Expert
My site:
http://www.jharding.com
Free Blog Radio:
http://www.tornadostream.com
> I'm streaming video using Flash Player 6. The problem I
am having is
> that the
> video will only play at a super small size, something
like 180 x 60
> (that's a
> guess). Is there a way to play the video at the 320
width that I
> redered it as?
> I'm using Flash Player 6 because some code that came
with my
> purchased Flash
> Template does not work unless it's published to Flash
Plaey 6.
> Thanks in advance!

Similar Messages

  • I have a JVC video camera and it records the video to a .mod format (which Apple devices don't support). I figured out how to get them to iPhoto using iMovie but I want to be able to get the videos on my iPad 2 but it won't let it sync. Any help?

    I have a JVC video camera and it records the video to a .mod format (which Apple devices don't support). I figured out how to get them to iPhoto using iMovie but I want to be able to get the videos on my iPad 2 but it won't let it sync. Any help?

    Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
    Thanks

  • HT1338 Hi everybody..i have an enigmatic problem since i bought MacBook Air..i can't watch youtube videos and i did install the latest adobe flash player BUT when i start to install it the system keeps asking me to enter a password ? which password i need

    Hi everybody..i have an enigmatic problem since i bought MacBook Air..i can't watch youtube videos and i did install the latest adobe flash player BUT when i start to install it the system keeps asking me to enter a password ? which password i need ??????

    Your admin account password.

  • Workflow Activity "Lookup Value" returns An error occured while enumerating the filter using [//WorkflowData/customvalue]

    I want to generate an Accountname using EmployeeID, FirstName and LastName via a workflow.
    I'm using the Granfeldt Workflow Activity Library (https://fimactivitylibrary.codeplex.com/)
    I'm using the FIM Powershell Workflow Activity (https://fimpowershellwf.codeplex.com/)
    Steps:
    Passing the EmployeeID, FirstName and LastName to the powershell Activity, generating a logonid based on logic.
    Add-PSSnapin FIMAutomation
    $EmployeeID = $fimwf.WorkflowDictionary.EmployeeID
    $Forename = $fimwf.WorkflowDictionary.Firstname
    $Lastname = $fimwf.WorkflowDictionary.Lastname
    'logic creating a custom logonid here
       ==> This works
    Returning data back to the workflow via that powershell script:
    $fimwf.WorkflowDictionary.Add('NewAccountName',$newlogonid)
       ==> This works
     Using Lookup Value Activity to read the Workflow data and update the [//Target/AccountName] fails.
    This gives an error:
           An error occurred while enumerating the filter 'string' .
    (where string is the actual generated userid that I've got back from the powershell script. Example dab2563)
    I tried with only [//WorkflowData], then this gives the error:
          Index was outside the bounds of the array.
    Any hints to solve this?    
    Kind regards,
    David

    The Lookup Activity is for looking up an object in the FIM Service. Seems like thats not what you're trying to accomplish.
    For updating the target of the workflow, just use the built-in Function Evaluator. The Lookup WF was not built for that and it is failing because you have not specified a valid XPAth lookup filter, such as /Person[AccountName='BillG']
    Regards, Soren Granfeldt
    blog is at http://blog.goverco.com | facebook https://www.facebook.com/TheIdentityManagementExplorer | twitter at https://twitter.com/#!/MrGranfeldt

  • Is there a way to mute video in FaceTime while watching the video of the person you are calling using the MacBook Pro?

    I am using FaceTime to look in on a meeting being held on the other end, but I don't want the people on the other end to be able to see me. Is there a way to disable the camera while watching on FaceTime on my MacBook Pro?

    First of all, if you want to run video inside a .pdf on an iPad, you should be aware that the Adobe Tablet and Mobile reader does NOT support rich media ( audio or video ).  Despite trying to encourage Adobe to 'get real', it seems that they have no intention to do so in the short term.  SO ... I have been working with a company called Readdle, and beta testing their 'PDF Expert' application, and it is probably the most sophisticated .pdf  reader for iOS on the market.
    It supports rich media, and certain levels of JavaScript that are particularly useful for this kind of work.
    However, if all you want to do is insert video into a single .pdf document, that will run on iOS ( with 'PDF Expert only' ) as well as desktop Mac or PC, the video needs to be h264 .mp4 format ( basically avoid ANY based Flash content for iOS ).
    You should also note, that active Buttons ( not hyperlinks, which are different ) which you might wish to create in say InDesign or even Acrobat, need to be made up of just imagery (and that also means converting your text to outlines ).  However, this is only necessary for iOS with PDF Expert.  Also be aware that I have not done much work which includes .pdf on Android.
    I do think though that if you stick with basic navigation, avoid active 'Layers' authoring and only want to run simple video, the h264 .mp4 encoding is going to work across ALL platforms.
    If you want to have a look 'under the hood' of  an example, please DOWNLOAD and save this item
    https://dl.dropboxusercontent.com/u/11563257/3.%20Interactive_iPad_test_for_PDF_EXPERT.pdf

  • Import movie from iPhone gives "An unknown error has occurred while reading the video file. Connecting to Dynamic Link server failed. (1)

    Tried previous suggestions about purging the Camera Raw Cache and I raised it to 20.0 GB.
    Still lightroom fails to read most of the videos that I create on my iPhone 6 plus.
    Aperture, iMovie, and Image Capture have no problem with these files.
    Respectfully,
    Kay Fisher

    This is an iPhoto problem. It is, IMHO, one of the worst photo/video programs ever thought up by any company.
    I suggest you find your original video files, which won't contain any edits and or adjustment you have made in iPhoto, and copy them to some other folder on your drive that you create and then import them to LR.
    Usually iPhoto stores all original image and video files in a folder called Masters buried deep inside the iPhoto Photolibrary package folder. Which makes almost impossible for any normal computer user to get to.
    Next time you are in the market for a new computer think long and hard before you drink the Apple Mac Cool-aid.

  • [urgent ]runtime error  occured while creating the material using mm01

    hai
    am configure the ale program now . the problem is occured during the creating the material using mm01.
    am using client 000 (sending system). and i want to send the material to the client 400(receiving system)
    while am  save the created material using t-code mm01 in client 000 . it depicts the error as
    syntax error in program SAPLC140. 
    plz resolve this problem.
    regards
    surender

    Hi,
        In MM01 transaction code u have a problem..normally u will go to mm01 screen to create the material..i thought the same error will occur...so call basis to rectify this problem..
    Thank u,
    Manjula Devi.D

  • Error occur while protecting the document using RMS sharing application

    The set-up in which the error occurs has the following details,
    Server name :    hcdc1.ad.com
    RMS SCP :            adrms.ad.com
    http:// adrms.ad.com /_wmcs/licensing/license.asmx
    http:// adrms.ad.com /_wmcs/certification/certification.asmx
    Unable to protect the document and error as "An internall error occured error code 0X8007054F" 

    Hi,
    What Office Suite version you use? If Office 2010, I suggest you uninstall RMS Sharing App and install it once again using following command: 
    setup.exe /s /configureO2010Admin
    After that, run one of the following commands, depending on you operating system:
    For Windows 8 and Windows 8.1, 64-bit: x64\aadrmprep.exe /configureO2010  ; 32-bit: X86\aadrmprep.exe /configureO2010
    For Windows 7, 64-bit: x64\win7\aadrmpep.exe /configureO2010
    Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

  • Keep getting error occurred while formatting the disk using boot camp with usb

    So I keep getting the above error when trying to use boot camp with a USB drive. I have tried with more than one flash drive, all formatted to FAT32, multiple isos, both ripped right from a windows 7 ultimate dvd and downloaded, and I have made sure the iso was unmounted. I have also tried all different combinations of checking the options in the boot camp assistant menu. Any ideas on how to get this to work?

    I was mistakenly thinking of the Fat16 limit. That is my mistake.
    When bootcamp assistant failed to create the USB from my iso disk (with no explanation), I decided to experiment a little with the dd and cp utilities. dd failed, and cp told me the install file was too big.
    The install.wim on my iso is 4,351,019,025 bytes. So even if 4GB is the file size limit, it is too big. 4GB is 4,294,967,296 bytes if I recall.
    If I am still right about the file size, smaller editions of windows 7 would be able to fit on the flash drive, or people can have an actual DVD with windows 7 and install from there.

  • Black Screen when trying to view videos that use Flash Player

    Hi all,
    Sometimes when I'm trying to view videos on Youtube or BBC iPlayer, which use Flash Player, I'll click play and after around 2-3seconds of the video playing, my screen will go black/dark blue and the audio will stop. I'm then forced to hard reset my computer as no keyboard shortcuts work. This is starting to annoy me. Any help would be appreciated.
    I have the latest Catalyst, 12.1, the latest Chipset and BIOS. I have even tried re-installing Windows to no avail. I have also tried uninstalling Adobe Flash Player using your official uninstaller and then re-installing and yet I still get this problem.
    System Specs;
    AMD-FX 4100 Quad Core Processor @ 3.6GHz
    8GB Corsair 1333MHz RAM
    320GB Samsung SpinPoint HDD
    Powercolour Radeon HD 6870 1GB
    ASUS M5A97 PRO Motherboard
    OCZ Fatal1ty 750W PSU

    Your video card should be fine for GPU acceleration, but to rule this out can you try disabling hardware acceleration to see if that helps?
    How do I disable or enable hardware acceleration?
    If this works, please open up a new bug report so we can take a further look.  Here's a page that describes what we'll need.
    How do I troubleshoot and report problems with Flash Player Video?
    Thanks,
    Chris

  • I'm having problems when Firefox 5 uses Flash Player.

    Whenever the browser uses Flash player ''(ex. Facebook games)'', my browser becomes so slow, that even opening a new tab takes time to load.
    One more thing, whenever I watch videos from youtube, although the buffer is finish, the video is choppy.
    Any solutions with this?

    No solution but some general comments
    It may be worth disabling firebug, and any other unnecessary extensions, also consider any other background tasks, for instance is the computer indexing drives, or doing other downloads or security scans.
    Experiment with hardware acceleration on and off, in both firefox prefs, and FlashPlayer settings. Ensure any video drivers are up-to-date.
    Do you need the multiple java consoles, and is there any possibility skype may slow things down ?
    It may be worth considering a new separate profile just for flashplayer gaming.

  • Is there any way to PAUSE/RESUME the actual recording while recording a Video Demo slide in Captivate 8?

    If I have to take an "off-screen" action while recording a video demo slide in Captivate I am forced to END and start a separate video demo to continue.
    This fragments my demo and seems an unnecessary set of steps.
    Is there a way to pause the recording for long enough, say to clear my throat, and then resume?
    Thanks.

    Hi kjjr54,
    Please refer to the link below:
    Create Mobile Learning & Elearning Content. Screen Capture, Screen Recorder | Adobe Captivate 8
    Hope this helps!
    Regards,
    Sheena

  • Is it possible to record an image while recording a video??

    Is it possible to record an image while recording a video??, i know it is possible when the camera is just showing.

    Ok i 'm developing an aplication for a hospital where the doctors use the system. For example a pacient goes to take an endoscopy chekup, where the doctor introduces a little camara into the pacient body to see the problem,so the system must be showing that, with this there is no problem JMF uses a Player to do that, the doctor can see what is going on and take a snapshot(image) at the same time. The problem is that when the doctor starts to record a video and at the same time wants to take some snapshot of that video recording.
    I use this line of code, but it returns null, and got this message: player doesn't support FrameGrabbingControl.
    FrameGrabbingControl cg
    cg = (FrameGrabbingControl) processor.getControl("javax.media.control.FrameGrabbingControl");

  • I'm having a problem while recording a video

    'm having a problem while recording a video
      When the memory card and the highest quality ..
    Stop and is working
    I recorded video works normally on the memory card.

    Nokia C5-00 5MP

  • TS3850 how to import a video from a tape recorder the brand is Canon XL1 mini DV into Final Cut or iMovie?

    how to imort a video from a tape recorder the brand is canon XL1. i use firewire 6ping befort but the new Mac have not 6ping, they have 9ping

    This is what you need:
    http://rocketfish-prod-live.teletech.com/products/computer-accessories/RF-AP309. html

Maybe you are looking for

  • Missing:  RSDS 2LIS_03_BF   from Content

    When activating from BI_CONT the cube 0IC_C03 some content is missing. It came with the Transformations and DataSources of: RSDS 2LIS_03_BX -> TRCS 2LIS_03_BX_TR But is missing the ones: RSDS 2LIS_03_BF -> TRCS 2LIS_03_BF_TR RSDS 2LIS_03_UM -> TRCS 2

  • Creation of Polite db in Palmtop having Win CE 2.11

    We are using a palmtop having Win CE version 2.11. we have the following problems in installing 9i lite. 1) We have tried executing cesetup.exe from mobile\SDK\WinCE\WCE211 directory. It hangs at \ORACE\createdb polite polite statement from the Ceset

  • First of all I dont speak english very well but ok. I lost my cell phone and I want track it, how can I do it?

    First of all I dont speak english very well but ok. I lost my cell phone and I want track it, how can I do it? My cell were turned pdf

  • Extract balanced parantheses from String

    Hi community, I am getting back to work on LabVIEW after long. Currently implementing an algorithm and I need to work with tree like structures presented in the form of strings with parantheses. So, for example, a string such as A(B(c,d),P(q,r),U(V(w

  • Reporting reqirement

    Hi all, can any one give me please the transaction code or path for the following report like: Printing all Vouchers: Sales Invoice, Purchase order, Bank Check Paymennnt. Debit Note, Credit Note,Sales Order, Bank payment and receipt, cash paymennt an