Video Streaming stops go stops from Air to ATV3

Hello,
I have buyed ATV 3. When I look youtube video on my Mac Air perfect. But when I want to stream it
to ATV3. 
After 3 seconds the video stops go stops go .....
What can be the reason?
Distance to router perfect. ATV3 can stream from inside software perfect.
Thank you
Regards from Germany
Robert

Hello Winston,
I was initially just trying to watch ANY trailers. Virtually everything on ATV stalled after a minute or so. Switching to exclusively wireless n transmission from the AEBS seems to have fixed everything. We haven't tried to download movies, but probably won't since we're on satellite internet and have a fair access policy that limits our downloads to 17 gig a month. That's plenty for youtube and other normal usage, but I'm afraid too many movies would mess things up.
Wildblue has a configuration utility that we can set up on the computers, but nothing like that for ATV. I had thought that might be the problem originally, so I used a macbook (2.0 CD) that hadn't run the configuration setup, and it still worked fine for youtube stuff.
I didn't know things were streaming from different sources, when I was trying to watch the same video. Makes sense though. Thanks for the reply.

Similar Messages

  • JMF - client server video streaming how to stop

    Hi
    I am able to stream video from a server to multiple clients using AVReceive2 and AVTransmit2 from the JMF site.
    Iam developing a client server project. I have modified the above code such that Iam able to start and stream the videos by calling on servlets and socket connections.
    The AVTransmit2 code does not however have a stop button and it uses a thread.sleep method. I do not know how to add a stop button in the GUI on AVReceive2 to call on AVTransmit2.
    I am using sockets to communicate to and from the server. Do i have to use RMI or is there another easier way to call stop from the client which would stop the transmission on the server?
    Also, after the video file has been successfully streamed, when I refresh and try to connect again, the server is invoked and __it starts transmission_,_ but the servlet which calls the AVReceive fails and the frame does not show. Any possible reasons why?
    Thanks in advance.
    Junior

    I don't know the speed of the connection.
    4-10 users usually.
    .11b or .11g I don't know.
    microwave nearby - I don't know
    5-6 other wifis - yes
    I will try Safari, thanks!
    Thanks for the update. The speed of the Wi-Fi in the
    coffee shop will depend on many factors. What is the
    speed of their connection to the Internet? How many
    people are sharing the Wi-Fi? Is it 802.11b or
    802.11g? Do they have a microwave operating nearby?
    That will often interfere. Are there additional Wi-Fi
    networks nearby? That can interfere as well. It's
    possible that it was their network that's causing
    your trouble. But, to rule that out, did you try
    using Safari instead? You might make sure you have an
    up-to-date version of the Flash player which you can
    get at http://www.adobe.com
    I have Clearwire
    at home, it's basically like wireless DSL. It's not
    as fast as cable Internet access, but it is portable.
    I only mentioned it because it would indicate that
    you don't need cable speed to watch the videos
    without buffering.
    -Doug

  • Video Streaming - How to stop buffering time?

    Hi
    I am trying to watch a tv show I missed on NBC,
    "age of love" but the replay stops every minute
    to download more video I think. How do I improve
    the performance so I can watch the show without
    the constant interruption?
    thanks in advance
    Mark S
    iBook G4   Mac OS X (10.4.8)   756 RAM

    I don't know the speed of the connection.
    4-10 users usually.
    .11b or .11g I don't know.
    microwave nearby - I don't know
    5-6 other wifis - yes
    I will try Safari, thanks!
    Thanks for the update. The speed of the Wi-Fi in the
    coffee shop will depend on many factors. What is the
    speed of their connection to the Internet? How many
    people are sharing the Wi-Fi? Is it 802.11b or
    802.11g? Do they have a microwave operating nearby?
    That will often interfere. Are there additional Wi-Fi
    networks nearby? That can interfere as well. It's
    possible that it was their network that's causing
    your trouble. But, to rule that out, did you try
    using Safari instead? You might make sure you have an
    up-to-date version of the Flash player which you can
    get at http://www.adobe.com
    I have Clearwire
    at home, it's basically like wireless DSL. It's not
    as fast as cable Internet access, but it is portable.
    I only mentioned it because it would indicate that
    you don't need cable speed to watch the videos
    without buffering.
    -Doug

  • Video Streaming on Web Browser from Web Camera

    How to run Web Camera on to the Web Browser through JAVA and JMF?

    How to run Web Camera on to the Web Browser
    through JAVA and JMF? As someone who has written dozens of applets, and
    helped debug hundreds of them, I can tell you that
    applets are not for beginners.
    Whenever I must have an applet that is any more
    than completely trivial, I will code it as a combined
    application/applet, if only for making testing faster
    and easier.
    Further, if you have a working application, it can be
    'launched from a link', just like an applet, but using
    web start.
    I suggest you put aside the applet idea for the
    moment, and concentrate on doing this in an
    application.
    When that is working, you can decide whether
    to launch it using web start, or embed it as an
    applet in a web page.
    Here is an example of launching JMF (the
    player) using web start.
    http://www.javasaver.com/testjs/jmf/#test5
    As far as coding for a web cam, a quick Google leads to..
    "Here is the source code to JMF Webcam app + saves jpeg"
    http://forum.java.sun.com/thread.jspa?threadID=247253
    2 notes:
    1) I found that URL for the web cam code using
    Google. I have never dealt with web cams myself.
    2) Normally I ignore threads with no dukes. I am
    usually pretty busy, and dukes indicate how
    important a thread is - to whoever is asking.
    So, if you want to complete this task faster, you might
    - search for answers first.
    - add dukes to any question, to indicate interest.
    HTH

  • EA6500 Choppy Video Stream to Xbox360

    I've been viewing some videos streamed through the EA6500 from a Qnap 419p II NAS, and several video files are playing back extremely choppy.
    I can confirm that the video files play fine on the Xbox360 using a USB key and have also previously streamed these videos without any problems using a Belkin Wireless Pre-N router (that I upgraded from) streamed from the same NAS.
    I've attempted to configure the Media Prioritization feature, but haven't noticed any different results. I have also adjusted other various settings that haven't affected the playback in any way.
    My only guess is that some of the files are encoded in a format that the router is struggling with - the video files are not HD videos, and their bitrates are generally quite low - if my old Belkin router can do it, the EA6500 shouldn't have any problems either.
    Any help would be greatly appreciated! 
    Here's my router's configuration:
    - Software version: 1.0.0.145954/1.0.0.159292
    - EA6500 firmware version: 1.1.28.146072
    Thanks for reading my post!

    Hey jamay,
    Below you'll be able to find the information about the video file I'm trying to stream from my Qnap NAS to my Xbox360.
    Note that I'm not actually using the routers USB attached storage / Media Server DLNA features to stream the file, but simply streaming the file from one network device to another. The codec that the video was encoded with won't necessarily apply.
    The video does stream okay to my Home PC, but not the Xbox360. My Home PC is using a static IP address, but the Xbox is currently configured to aquire an ip address from the routers DHCP server. I might try and see if using a static IP address will change anything.
    Here's the Video File Information:
    Format : AVI
    Format/Info : Audio Video Interleave
    File size : 236 MiB
    Duration : 23mn 35s
    Overall bit rate : 1 400 Kbps
    Video
    ID : 0
    Format : MPEG-4 Visual
    Format settings, BVOP : No
    Format settings, QPel : No
    Format settings, GMC : No warppoints
    Format settings, Matrix : Default (H.263)
    Codec ID : DX50
    Codec ID/Hint : DivX 5
    Duration : 23mn 35s
    Bit rate : 1 198 Kbps
    Width : 720 pixels
    Height : 480 pixels
    Display aspect ratio : 3:2
    Frame rate : 23.976 fps
    Standard : NTSC
    Color space : YUV
    Chroma subsampling : 4:2:0
    Bit depth : 8 bits
    Scan type : Progressive
    Compression mode : Lossy
    Bits/(Pixel*Frame) : 0.145
    Stream size : 202 MiB (86%)
    Title : Video
    Writing library : DivX 5.2.1 Alpha (UTC 2004-09-08)
    Audio
    ID : 1
    Format : MPEG Audio
    Format version : Version 1
    Format profile : Layer 3
    Codec ID : 55
    Codec ID/Hint : MP3
    Duration : 23mn 34s
    Bit rate mode : Constant
    Bit rate : 192 Kbps
    Channel(s) : 2 channels
    Sampling rate : 44.1 KHz
    Compression mode : Lossy
    Stream size : 32.4 MiB (14%)
    Alignment : Split accross interleaves
    Interleave, duration : 42 ms (1.00 video frame)
    Interleave, preload duration : 500 ms
    Title : Audio
    Writing library : LAME3.92

  • Why is my ipad2 not buffering videos streaming from web as quickly as it can play them and keep making my videos stop playing?

    When I try watching videos streaming from itunes or u tube or any streaming source the ipad2 does not buffer the videos as fast as they are being played. This makes the videos stop playing within a few seconds after they start and I have to continuously hit the play button to watch videos in bits and pieces. This makes the streaming of videos on this device virtually impossible.

    You may be having some problem in your local network or your internet connection is not fast enough to properly stream the videos.
    What type of internet connection are you using (cable, DSL, etc?)
    What sort of local network do you have? router make/model, etc.
    What other traffic is on your network?

  • Video Gallery, How to Stop overlapping streams when user navigates to next item? Bug or syntax?

    My NASA Multimedia News App is exhibiting behavior that I would very much like to change. The app is in the store at
    http://apps.microsoft.com/windows/en-us/app/nasa-multimedia-news/7e74f3fb-b550-4ac6-b437-388f034ee6df
    If you look at one of the three video galleries, here is the scenario:
    1. Start one of the videos, for example the most recent one.
    2. without MANUALLY pausing the first video and before it finishes, scroll to the next item in the same gallery and PLAY it.
    3. two streams are now playing, audio overlapping.
    4. move on to the next item in the gallery OR GO TO A DIFFERENT PAGE/SCREEN, cover your ears.... 
    in fact the stream needs to stop if you navigate away from it by either starting a different video in the same gallery or when you navigate to a different screen/page in the app. and it doesn't.
    5. in fact, if you close the app by dragging it down and don't final close it by drag/hold flip or using taskmgr, if you re-open it the multiple audio streams will still be playing from where they left off.
    I don't honestly know if it is the video control or something I didn't do in the syntax (or even if something CAN be done), but with the overlapping cacophony that results, it is less than optimal. My expectations/hopes, were that if one stream was already
    playing, that moving to a new item and starting THAT stream would automatically terminate the original one that was playing so that only a single audio stream can be heard.
    I hope the issue is clear.
    Is this a bug? If it is by design, ugh. And is there a work around?
    -- Barb Bowman

    On Sat, 5 Apr 2014 01:20:04 +0000, thorwm wrote:
    >All kidding aside, I did some searching in the forum and I found this post that may help?
    >
    >http://social.technet.microsoft.com/Forums/en-US/6037342d-2575-411b-a496-90d306f82b00/unable-to-stop-a-video-playing-using-updatecontextvideopause-true?forum=projectsiena
    >
    >Btw, what you're talking about sounds very similar to how Adobe Flash works - it figures that you (the end user) must know what you're doing when you start another audio file / video so it keeps adding to the stream.  The way I helped
    the end user was to add the code to stop the media file playing when another one was selected.
    >
    >Hopefully the thread above gives you some ideas how you might do this in your situation. 
    >
    >
    >I look forward to hearing what you find - sounds like a neat app (no pun intended!)
    Thor, it is my NASA Multimedia App - I resubmitted it last night and I guess a
    different tester got it and the update went through. But the issue still exists.
    The difference between what I have in my app and that other thread is that I
    have a video GALLERY as opposed to individual players. I did try messing around
    with that  syntax
      UpdateContext({videoPause: false}); UpdateContext({videoPause: true});
    Navigate(scrHome, ScreenTransition!Fade)
     But it didn't work between screens in my App and anyway, half of the issue is
    that it wouldn't work on a single screen that contains a video gallery that has
    say 10 videos, there is no OnSelect function used. I tried experimenting to see
    if I could get syntax working at least for when the navigation is to a different
    screen, but it doesn't work for me. Probably because it is a gallery.
     Hoping that Robin has a solution...
    -- Barb Bowman

  • Video streaming stop after a few seconds

    this happens in all browser. Video streaming stops after afew seconds and stop loading. i have to refresh the page and will happen the same. The only video i can play is from youtube videos only. it is happening is internet explorer, firefox and google chrome.  Im using windows 7, operating system 64 bit. My internet is working right.  please i need help

    Try increasing your storage? http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html

  • How do I stop Final Cut from seperating video on timecode breaks?

    Working on a dive video which has many start/stops breaking time code and final cut wants to create a new video for each one, how do I stop it from doing that?  I want just one long video, timecode breaks and all.

    You can control whether start/stop indicators create individual media files by selecting or deselecting the “Create new clip on Start/Stop” checkbox in the Clip Settings tab of the Log and Capture window.
    In the General tab of the User Preferences window, the option you choose from the “On timecode break” pop-up menu determines how timecode breaks affect capture, but the Warn After Capture option is disregarded to avoid capturing media files that contain breaks in the middle of an MPEG-2 GOP.
    To choose how Final Cut Pro handles start/stop detection when capturing HDV footage
    If you have not already done so, choose Final Cut Pro > Easy Setup, choose HDV from the Format pop-up menu, and then choose an Easy Setup from the Use pop-up menu.
    Choose File > Log and Capture (or press Command-8), then click Clip Settings.
    Select or deselect the “Create new clip on Start/Stop” checkbox to turn start/stop detection on or off:
    Start/Stop detection on: When the checkbox is selected, a new media file and corresponding clip are created each time Final Cut Pro detects start/stop indicators in the incoming HDV stream.
    Start/Stop detection off: When the checkbox is deselected, one continuous media file and corresponding clip are created, and start/stop indicators are ignored.
    Note: The option to turn off start/stop detection is not available when capturing footage shot on a JVC HDV camcorder because the nature of the MPEG-2 stream requires creation of a new media file at each start/stop indicator.
    Link

  • When I select a sound email or video, decide I want to go to another video or email, the sound from the first video continues to completion before I can listen to my new selection. How can I stop this?

    How do I stop the sound from a video or email when I want I click out of the video. Presently, the sound continues and I have to escape out to home screen to stop it.

    Now as you may know there is some icons at the bottom of the mail app, at the top left conner you should have the inbox button and on the upper right conner you should have two arrows to shift between emails. If any of those options works try :
    Settings>General>Reset>Reset all Settings
    If that does not work try to re add the account
    Last but not least, restore as new.
    Hope that helps.

  • Video streams in some apps stop after some seconds (S6000)

    Hi,
    In the apps DEL and Laola1.tv, video streams start with the first ~5 seconds, then stop, then repeat once and then stop.
    Problem does not occur with android phone or laptop in the same wlan. Other streaming like youtube works fine.
    Any hints or ideas greatly appreciated.
    Lenovo IdeaTab S6000, Android 4.2.2
    Thanks,
    Sven

    I already have radeon.modeset=0 on the end of my kernel line, I think I disabled KMS a month or two ago when it was (very briefly) enabled by default.  IIRC my system was very broken with KMS enabled back then, I haven't tried turning it back on.
    I've found xf86-video-ati-6.12.4-3 to work, and xf86-video-ati-6.12.192-1 not to work, irrespective of ati-dri version. I've just noticed 6.13 seems to be out, so I may try building that with ABS, and see if it fixes it.
    EDIT: or maybe I won't, as that needs xorg 1.8 and I don't have enough time to build that and all it's deps just now
    For now I've just set pacman to ignore the package, which works as a temporary solution. Are there any diagnostics I can do to help pin down the problem?
    Last edited by Jack B (2010-04-20 22:05:07)

  • All video streaming stops

    All video streams (NBC, ABC, Netflix) stop playing and require a system reset to begin playing again. When one service's video stops, all stop until the reset. Everything else still works. This began about a week ago on our iPad 1. Ideas?

    I've tried both things, but video still stutters.. Have also tried removing profile, and complete reinstall of firefox.
    I'm on 24 Mbit cable and the only user atm. IE and Chrome seems to work without stuttering.
    I've having this stuttering every ~5th second, like a small "1/4 sec buffering".

  • On my ipad video streaming stops after a few seconds only sound is playing .what could be the reason.

    on my ipad 2 video streaming stops after a few seconds, only sound is playing .what could be the reason and how to solve this problem.
    I have a feeling that it may have started after upgrading to ios6.

    Hi,
    Is this failing with Error 20 ?
    Sometimes in a the router or modem if you use Port Forwarding then you are your Buddy may be missing the Screen Sharing Port.
    The Screen Sharing part uses a different port to the Audio port.
    As the port for Audio (And therefore Video) are known and can be port Forwarded it is the random Screen Sharing port that can be the problem.
    iChat 3 info http://support.apple.com/kb/HT1507 that includes Bonjour and Jabber info
    iChat 4 info http://support.apple.com/kb/HT2282
    If you are not using (or your Buddy) UPnP then I would change the method of opening the port to that.
    6:14 PM Saturday; June 20, 2009

  • HT4437 how  can i stream audio to ipad from video playing on the apple tv using air play?

    how  can i stream audio to ipad from video playing on the apple tv using air play?

    I don't know what AppleTV can handle as far as bit rate is concerned, but increase the bit rate as high as it will let you. You are taking DV which is 25Mb/s and compressing it. If you're making an H.264, you should get great results needing no more than 6Mb/s. Bear in mind, the higher the bit rate, the larger the file size.

  • My iCloud stopped pushing photos from my iPhone to my iPad.  The photo stream has disappeared.  There is enough storage as well

    My iCloud stopped pushing photos from my iPhone to my iPad.  The photo stream has disappeared.  There is enough storage as well

    The answer to that is because your phone and your Mac are signed into different accounts. Sign the phone in using the same credentials as the Mac.

Maybe you are looking for

  • Split clips in Final Cut Pro X are losing audio

    So I am new to final cut and on my maiden voyage I came across an interesting problem: Whenever I use the blade tool to split my clips I am losing audio on the rest of the clip. I am using footage uploaded from a P2 card. The raw footage has audio an

  • DWM is not installing properly

    I have followed and read the arch wiki top to bottom, but am still unable to boot into dwm from LXDM. Here is what I did: First I downloaded the base-devel packages (using pacman) Then I downloaded all the abs packages (also using pacman) Then I ran:

  • Contacts full screen caller id

    do I have to set the contacts that are on my iphone 3gs to sync in from icloud only so that i can get a full screen caller id photo ?? I had tried this but i found that if there are any other contacts from google or yahoo the contacts photo when they

  • Simple LinkedList query

    Hi, I was just curious as to how a LinkedList would work in the following case: [ A ] -------> [ B ] ---------> [ C ] Say I am currently at position B in the LinkedList and I decide to remove the element at position B, would position C still be the n

  • Recent crashes of PS CS6 when saving a file

    Hi, Just started having an issue with PS CS6 crashing each time I try to save a file, no idea what this is or why it's happening, I've scoured multiple forums, re installed, checked fonts library. I'm at my wits end... Some help would be hugely appre