"View failed to load" error when I open Resources - Project Server 2013

Hello,
I get the following error when I open the Resources Page (I am using Project Server 2013):
"The view failed to load. Press OK to reload this view with the default settings. Press Cancel to select another view"
Help please.

Hi,
Is your environment up to date with the latest SP/CU?
HAve you tried selecting another view?
See those hotfix :
http://support.microsoft.com/kb/2760261/en-us
http://support.microsoft.com/kb/2863881/en-us
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Similar Messages

Error while creating a Timesheet - Project Server 2013

Hi everyone,
One of user of PWA encounters an issue when he tries to create a timesheet. This error only occurs with a timesheet of
a specific period, he can create all the other timesheet.
So, when he creates the timesheet, this error occurs : "The timesheet creation failed, because of problems with Project Web App or with data validations"
After reloaded the list of the timesheets, a link to go to the specific timesheet
is available but if we click on it, we have this error :
"View Failue - The view failed to load"
I think , this error occurs
because the timesheet is not realy existing even if we have a link to it.
In the log (full log at the end), I've got this error :
Exception occured in method 'TimeSheet.CreateTimesheet' System.ArgumentException: These columns don't currently have unique values.
I've found this link with the same kind of problem :
http://social.technet.microsoft.com/Forums/projectserver/en-US/b0a92afc-11fc-40ef-9a44-357d953b31f6/unable-to-open-or-create-timesheets-these-columns-dont-currently-have-unique-values?forum=projectserver2010general but I've checked and published all the
user project but still have the error.
Have you got any idea where are these columns ? How can I found them without checked every project of PWA ?
Thanks,
Patmol
Full logs, for information :
[bucketHash:E3B9DED0] Exception occured in method 'TimeSheet.CreateTimesheet' System.ArgumentException: These columns don't currently have unique values. at System.Data.ConstraintCollection.AddUniqueConstraint(UniqueConstraint constraint) at System.Data.ConstraintCollection.Add(Constraint constraint, Boolean addUniqueWhenAddingForeign) at System.Data.DataTable.set_PrimaryKey(DataColumn[] value) at Microsoft.Office.Project.Server.DataAccessLayer.Generated.TimesheetDalBase.ReadCustomFieldsForAssignments(ISet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportCustomFields(HashSet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportActualsAndCustomFields(IEnumerable`1 assignmentUids, ISet`1 userImported) at Microsoft.Office.Project.Server.BusinessLayer.TimesheetLoaderForGrid.Load() at Microsoft.Office.Project.Server.BusinessLayer.TimeSheet.CreateTimesheet(TimesheetDataSet dsDelta, PreloadType preloadType) at Microsoft.Office.Project.Server.Wcf.Implementation.TimeSheetImpl.<>c__DisplayClass45.<CreateTimesheet>b__44() at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions) StackTrace: at Microsoft.Office.Project.Server.Native.dll: (sig=6ea170d1-988e-4153-9f1d-0305c0ea0309|2|microsoft.office.project.server.native.pdb, offset=3C1E) at Microsoft.Office.Project.Server.Native.dll: (offset=1255D)
Watson bucket parameters: Microsoft Project Server 2013, ULSException14, 070f6ea0 "project server", 0f0011db "15.0.4571.0", ea364808 "system.data", 0400766f "4.0.30319.0", 52310bef "thu sep 12 02:33:51 2013", 00000e02 "00000e02", 00000020 "00000020", 44395864 "argumentexception", 00101621 "aeby7"
Error is: GeneralUnhandledException. Details: General Unhandled Exception in _TimeSheet.CreateTimesheet_ Attributes: System.ArgumentException: These columns don't currently have unique values. at System.Data.ConstraintCollection.AddUniqueConstraint(UniqueConstraint constraint) at System.Data.ConstraintCollection.Add(Constraint constraint, Boolean addUniqueWhenAddingForeign) at System.Data.DataTable.set_PrimaryKey(DataColumn[] value) at Microsoft.Office.Project.Server.DataAccessLayer.Generated.TimesheetDalBase.ReadCustomFieldsForAssignments(ISet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportCustomFields(HashSet`1 assignmentUids) at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportActualsAndCustomFields(IEnumerable`1 assignmentUids, ISet`1 userImported) at Microsoft.Office.Project.Server.BusinessLayer.TimesheetLoaderForGrid.Load() at Microsoft.Office.Project.Server.BusinessLayer.TimeSheet.CreateTimesheet(TimesheetDataSet dsDelta, PreloadType preloadType) at Microsoft.Office.Project.Server.Wcf.Implementation.TimeSheetImpl.<>c__DisplayClass45.<CreateTimesheet>b__44() at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions) . Standard Information: PSI Entry Point: Project User: i:0#.w|wavenet\cev Correlation Id: 9709e41b-9a18-e411-941e-00155d029b05 PWA Site URL: http://intranet.wavenet.lan/PWA SA Name: Project Server Application PSError: GeneralUnhandledException (42), LogLeve...

Hi Patmol,
Have you tried to go to the previous or next timesheet and then navigate with the "previous period" or "next period" to the timesheet in question.
Also have you tried to open it using a delegation session?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Error using Line Classifications in Project Server 2013 Timesheets

Background:
I'm working on a Project Server 2013 environment that is using Timesheet Line Classifications. In our environment we are not utilizing the Standard Classification but, we are instead using Billable Onsite, Billable Offsite and Nonbillable.
Issue:
If I have created a timesheet, then I am assigned an additional task and try to add the task to my timesheet using a Line Classification other than standard, I get an error pop-up. As long as I add the Standard line classification first, everything
works fine. If I delete and recreate the timesheet it prepopulates the standard tasks which also resolves the issue.
Questions:
1.) Has anyone else ran across this issue and have a fix?
2.) Is anyone aware of a product fix in a CU or Hotfix to resolve this issue?
Thanks,
Dustin

Dustin - as I understand it Timesheet Line Classifications allow you to
"Duplicate" Timesheet lines for business purposes or accounting reasons. When I first saw this explanation I was at a loss as to the benefit or purpose of this feature, fortunately I work with some smart customers and they soon opened my eyes to the
potential of this feature.
The operative word in the description is "Duplicate". Additional Timesheet line classifications are available but
not in lieu of the Standard Line Classification. As you have experienced if the "Standard" line is added to a Timesheet then an associated Duplicate Line Classification for the same task can be
added to the Timesheet.
To realise your requirement you might just decide what type of work is it you do that is most prevalent and regard that as being "Standard" and then use other line classifications to identify other Billable time - Non Billable Time reporting in a Timesheet
is available by default if it is enabled in Timesheet Settings and Defaults.
As an alternative do your Timesheet compilers decide the classification of the work they are booking time to?
You could consider Task Custom Fields using a lookup table to denote whether work is on-site or off-site with the Calculation for Assignment Rows option set to "Rolldown unless manually specified" - this will associate the task field value with the associated
Assignment. Using Task level fields set by whoever creates the project plan would remove the responsibility for differentiating the work "type" for your Timesheet users.
The querying and reporting of the different classifications of work as recorded in Timesheets would then be possible by virtue of the task field.
Dominic Moss | MAPM Microsoft Certified Technology Specialist | Our Newsletter:
PM News Project Server Specialists
Project Server PRIME | Twitter:
@Twitter | Facebook:
@Facebook | Linkedin:
Wellingtone

Document Failed to Load Error When Scanning a PDF

Every time I try to scan a document as a Pdf, I get a failed to load message. The scanner works fine if I use the JPEG setting. I've tried reloading Adobe Acrobat, but it doesn't solve the problem.
Any suggetions?

The PDF file does not appear to be saved or properly scanned. Normally, the scan ends and a preview appears in a window that can be saved. In the case of PDF, the preview doesn't appear. It's as if the document has not been scanned at all.
If I try to scan a document using a JPEG setting everything works fine. That is the preview document appears, which can then be saved.
Very perplexing.
D.

Error when try to install exchange Server 2013 in windows server 2008 R2 Sp1

Hi
I'm getting these errors while trying to install Microsoft Exchange Server 2013 on my Windows Server 2008 R2 SP1 the user i'm using is the Administrator and it is already a member of "Enterprise
Admins" and "Schema Admins"
in my organization there is 6 Exchange server 2013 in 3 site windows server 2012 in this case
I have to install exchange 2013 in windows Server 2008 r2 sp1
the functional level 2008 R2 I getting these errors please help.
Errors:
This computer doesn't belong to a valid Active Directory site. Check the site and subnet definitions.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.InvalidADSite.aspx
Error:
A reboot from a previous installation is pending. Please restart the system and then rerun Setup.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.RebootPending.aspx
Error:
There is a pending reboot from a previous installation of a Windows Server role or feature. Please restart the computer and then run Setup again.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.PendingRebootWindowsComponents.aspx
Error:
You must be a member of the 'Organization Management' role group or a member of the 'Enterprise Admins' group to continue.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalServerInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedBridgeheadFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedCafeFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedFrontendTransportFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedMailboxFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install or upgrade the first Client Access server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedClientAccessFirstInstall.aspx
Error:
You must use an account that's a member of the Organization Management role group to install the first Mailbox server role in the topology.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DelegatedUnifiedMessagingFirstInstall.aspx
Error:
Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See the Exchange setup log for more
information on this error.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
Error:
Either Active Directory doesn't exist, or it can't be contacted.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspx

I think it's from subnet in site and services
have 3 site A,B,C and new site is "D"I have problem in "D" site
A subnet is 10.33.50.0/24 AD 2012 ,exchange 2013
B subnet is 10.35.50.0/24 AD 2012 ,exchange 2013
C subnet is 10.36.50.0/24 AD 2012 ,exchange 2013
D subnet is 10.100.100.0/25 AD 2008 ,exchange 2013 error when install it
find event error
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair
the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
test-SetupPrerequisites
{Roles={LanguagePacks, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport, Cafe}, LanguagesAvailableToInstall=True, DomainController=, CustomerFeedbackEnabled=True, ExchangeVersion=15.0.847.32, LanguagePackDir=D:\Exchange
Server Software, SufficientLanguagePackDiskSpace=True, ADInitError=Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites
or by rep, ScanType=PrecheckInstall, LanguagePackVersioning=True, HostingDeploymentEnabled=False, TargetDir=C:\Program Files\Microsoft\Exchange Server\V15, SetupRoles={LanguagePacks, AdminTools, Bridgehead, ClientAccess, UnifiedMessaging, Mailbox, FrontendTransport,
Cafe}}

Email when approval are required - Project Server 2013

Hi everyone,
I've got a little question, is it possible to send an email when a new update appears in the "Approval Center" (PWA/Approvals.aspx) ? And if yes, how can I do this ?
I've tried with a workflow (in the "Project Server Workflow Tasks" list) but it does not seem to work.
Thanks,
Patmol

Hello Patmol6,
Ditto on what Hrishi suggests.
I would use a SQL query that search new approvals and when it finds one, then send an email. After the query is written, use SSIS (Sql Server Integration Services) and create a job to manage this. There are probably several goods SQL
administrators that could set this up for you.
Cheers
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

View Workspace Document Library on a PDP -- Project Server 2013

Regards!!
In Project Server 2010 exists a Solution Starter called "Project Workspace List Viewer". I need the same solution but in Project Server 2013, is this possible?? does somebody has created the same solution??
Thanks for your help!!

As per the link mentined below it wont work for 2013.
http://social.technet.microsoft.com/Forums/projectserver/en-US/bbedf949-acdc-4c75-83fc-e59f84fe77bc/displaying-the-contents-from-project-site-to-project-web-app?forum=projectonline
kirtesh

I have a book in my library but when I went open to continue to read "failed to load book because the requests resource is missing"? Where is it.

I have a book in my library but when I went open to continue to read "failed to load book because the requests resource is missing"? Where is it.

Swipe to the right from your home screen and do a search. See if the app shows up. If it does - tap on it just to make sure that it works.
You can swipe from screen to screen to look for it in order to find the icon. It may have ended up on a far off screen or in a folder somewhere on the iPad.

TS1702 Previously purchased book on iBooks, previously read. Still visible on iBooks on the iPad. When I attempt to open the book now, I get the message: "Failed to load book because the requested resource is missing." Help. Larry

On iBooks app on iPad: When trying to open a previously purchased and read book, I get the message "Failed to load book because the requested resource is missing." How can I open the book again? Larry107

Quit the iBooks app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logou appears and let go of the button.
Or try deleting the book and download it again. You can download it again for free as long as you use the same Apple ID.
If that doesn't work either, sometimes deleting the iBooks app and reinstalling it may work. But art with the first two suggestions.

HT4623 I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?

I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?

Hi there KrisonCastillo,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W.

Is my HD Dead? Reformat Disk Utility Error: secure disk erase failed with the error could not open disk.

Hi,
Fed up with seeing the spinning beach ball I decided to reformat my MacBook Pro...
After backing up everything on an external hard drive I put in the OSX install DVD, restarted the machine and held down 'C'.
I followed the install prcedure, clicking next a few times etc...
I then went into Utilities > Disk Utility. I chose 7-Pass to erase the Macintosh HD and set it off erasing.
I checked the process an hour in and message on screen read:
Secure disk erase failed with the error:
could not open disk
The internal hard drive no longer exists in the disk utility so I cant retry erasing it.
The only thing that appears in disk utility is the OSX install DVD.
I can't even shut down the mac as everything under the apple tab is greyed out!
I'm guessing this means my hard drive is broken right?
If anyone has any other ideas of what to try I'd really appreciate that.
How do I turn the machine off?
If my hard drive is gone then should I consider getting an SSD drive?
Any recommendations for such a drive would be great.
Hope you can help!

Did you partition the drive?
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

Error: "failed to load book because the requested resource is missing"

I book a book via the iPad. The book appeared in my library no problem with the "new" tag and stuff, but when I tap it to read I get an error "failed to load book because the requested resource is missing." Any ideas? I'm on the road, so I haven't synced or backed up or anything..
I've also verified that I have a good connection, etc. I'm able to hit the "store" button and browse the store no prob, as well as web, etc.
Any thoughts?

I believe I may have the answer to these many concerns.
When a book is over 20 or so megs, iBook will sometimes make an attempt to download on the iPad (when it should not). This causes problems. Perhaps the one you are experiencing. Therefore you have to wait until you are on a wifi connection before purchasing dictionary-like books. But if you've already made the mistake of downloading, theres no guarantee wifi will correct this.
What worked for me (like others have already mentioned) is that if you have an iphone or touch you can download it from there, sync with your computer and sync your iPad later. The book(s) will transfer just fine as long as you have this enabled on your devices.
Initially this didn't work for me because in my frustration with a prior issue I took the liberty to create another iTunes account. Therefore iPad purchases were not visible on my phone. So be sure to have the same accounts activated on your devices and iTunes.
Yet even further diagnostics may need to be explored as I'm still prompted to provide my password every time i open iBooks (as if the download is still pending). Kinda afraid to revert to factory settings over a small issue. In the coming update Apple should fix these problems altogether. Hope this helps!

Error message "Failed to load book because the requested resource is missing" on iPhone

I purchased 3 books in itunes to read on my iphone using ibooks. I have synced and I can see the books in my iBooks bookshelf, but when I try to open them I get an error message "Failed to load book because the requested resource is missing". I have tried opening the book again, deleting and resyncing but nothing seems to work. Any suggestions?

I was having the same probem.
I found success when I shut my iphone down all the way (press and hold power button then "slide to power off")
then started it back up. My phone was linked to my computer at the time, so it went through the sync - not sure if that is important. But, I can now read my books!
Good luck

View Failure - the view failed to load

Hi,
I am working on a master project with several subprojects, and when I published the project, and then go to look at it in PWA i get a warning popup that says "The view failed to load. Press OK to reload this view with the default settings". Pressing OK leads
to the popup showing up again.
As suggested in other threads i tried updating to the October CU but that didn't solve the problem.
Any help is much appreciated!
Makolyte, Software Developer + System/Network Admin

Makolyte,
Since this is master project issue could be related to one or more sub project. How many sub projects do you have?
Can you try to open each sub project separately in PWA?
Another way to narrow down the issue is to publish one project at a time.
Open the master project in Project Pro. Insert a column "Publish"
Set No for all sub projects. Save and Publish master project. Try to reproduce the issue in PWA.
Next set Publish=Yes for 1 project plan and repeat the rest of the procedure. This will help to identify the project plan causing view to failure.
Also if you have access when issue occurs review latest ULS log from the server.
Hrishi Deshpande – Senior Consultant DeltaBahn
Blog | < |
LinkedIn
Please click Mark As Answer; if a post solves your problem or Vote As Helpful; if a post has been useful to you.This can be beneficial to other community members reading the thread.

Solution to "Quicktime Plug-in failed to load" error

My solution to "Plug-in failed to load" error message when attempting to watch demo movie on Apple website (and others):
I found two Quick-time plugin.plugin files in my Internet Plug-ins folder in my
User Library folder. One was version 6.3 and one was version 6.5.2.
Removing the 6.3 version solved the problem. Removing the 6.5.2 version had no effect, so I removed it also.
Never could have solved this one without the help of Woody at Apple!!!!

Why not install version 7?

"View failed to load" error when I open Resources - Project Server 2013

Similar Messages

Maybe you are looking for