View log not showing physical SQL generated in OBIEE 11.1.1.6.7

Hi,
I am currently using OBIEE 11.1.1.6.7 version. In this version I am unable to view the physical SQL generated by OBIEE under Administration --> Manage Marketing Jobs --> Select a Job --> Click on View SQL OR Administration --> Manage Sessions--> Select a Job --> Click on View SQL. It is not showing the physical SQL generated by OBIEE for a report or segment which I have executed.
It was available in previous version i.e. OBIEE 10.1.3.4.2.
I have searched in metalink and it has been suggested to use the following <Filters> section into instanceconfig.xml file. I have added the following details into existing instanceconfig.xml file and then restarted the BI services. Still the problem persist.
<Filters>
<FilterRecord writerClassGroup="Console" path="saw" information="16" warning="31" error="31" trace="32" incident_error="1"/>
<FilterRecord writerClassGroup="File" path="saw" information="16" warning="31" error="31" trace="32" incident_error="1"/>
<FilterRecord writerClassGroup="Marketing" path="saw.mktgsqlsubsystem.joblog" information="16" warning="31" error="31" trace="32" incident_error="1"/>
<FilterRecord writerClassGroup="File" path="saw.httpserver.request" information="16" warning="31" error="31" trace="32" incident_error="1"/>
<FilterRecord writerClassGroup="File" path="saw.httpserver.response" information="16" warning="31" error="31" trace="32" incident_error="1"/>
</Filters>
Thanks,
Prasanta

Hi,
Thanks for the reply.
We used to view the log details (physical SQL) using Manage Marketing Jobs in OBIEE10g.
In OBIEE11g we can see the job details and when selecting a job (under Action column Details link) there is an option in left pane as 'View Log'. If I click on 'View Log' it is showing as 'No Logs Found'.
Just wanted to confirm if this is an issue in OBIEE11g.
Also, I believe there is a limitation in 'Manage Session' to view the number of job details whereas in 'Manage Marketing Jobs' section we can increase the number of jobs to be displayed.
Thanks,
Prasanta

Similar Messages

Can we change physical SQL generated by BI Server?

Hello gurus:
I have a doubt. How can we change the physical SQL generated by OBIEE?
is there any way we can modify the SQL Cost?
Let me know.
Thanks.
Vinay R.

So If I have a View and a physical table, so View will have lower cost compared to Table?
Can you explain a bit more about this?There is absolutely no way we can estimate the cost of a view or a table we don't know. There are too many variables so your question is too wide and unprecise. Generally speaking views that select from only one table do not add any extra cost to the execution plan, Oracle will convert them to the underlaying table. Having said the usual reason to have a view is to join different tables and apply some data filtering conditions so it will depend a lot on what kind of query you are running.

[NQQuery log]: Physical SQL generated agaisnt 2 Database in OBIEE 11g

Hi Experts,
I have a problem regarding the physical SQL generated by Query log.
So this is the setup.
SCENARIO 1:
Oracle Data Warehouse DB
- col1
- col2
- col3
OLAP_OBIEE
- col4
When I run these columns together in Analysis. It seems like the physical SQL generated in the Query log is partitioned with each other and I cant get the exact SQL so I can make comparison with the total record count in Analysis UI and the SQL developer.
select col1, col2, col3 from Oracle Data Warehouse tables
select col4 from OLAP_OBIEE tables
================================================================
SCENARIO 2:
Oracle Data Warehouse DB
- col1
- col2
- col3
- col4
Running these columns together in Analysis. I am wondering why the physical SQL is somewhat also partitioned just like in SCENARIO 1.
select col1, col2, col3 from Oracle Data Warehouse tables
select col4 from Oracle Data Warehouse tables
Hope that you get what am I trying to say. :(
Thanks,
Edited by: OBIEE/BIP Forumer on Oct 29, 2012 1:27 AM
Edited by: OBIEE/BIP Forumer on Oct 29, 2012 1:27 AM

Hi Maqsoon,
Sorry for the confusion, in my Analysis report, I have a report where it generates 2 physical SQL in one Database, also I have a report where it uses 2 Database which also generates 2 physical SQL.
Below is the SQl generated in my Analysis report using 1 Database
select count(distinct case when T68197.OPTY_WID > 0 then concat(T67058.INTEGRATION_ID, cast(T67058.DATASOURCE_NUM_ID as CHARACTER ( 30 ) )) end ) as c1,
T67058.OPTY_O_REVN as c2,
T67365.CUST_VALUE_NAME as c3,
T157680.NAME as c4,
T157680.INTEGRATION_ID as c5
from
W_OPTY_D T67058 /* Dim_W_OPTY_D */ ,
W_REVN_F T68197 /* Fact_W_REVN_F */ ,
W_PARTY_D T157680,
W_PARTY_ORG_D T67365
where ( T67058.ROW_WID = T68197.OPTY_WID and T67365.ROW_WID = T157680.PARTY_ORG_WID and T68197.PR_CUSTOMER_WID = T157680.ROW_WID )
group by T67058.OPTY_O_REVN, T67365.CUST_VALUE_NAME, T157680.NAME, T157680.INTEGRATION_ID
order by c5, c2
[2012-10-30T11:44:39.000+00:00] [OracleBIServerComponent] [TRACE:2] [USER-18] [] [ecid: 352c537d7893ee94:-5718ddd6:13aaccb7670:-8000-0000000000005c50] [tid: f650d700] [requestid: 45ca0005] [sessionid: 45ca0000] [username: joshua.l.manego.iii] -------------------- Sending query to database named Oracle Data Warehouse (id: <<1201371>>), connection pool named Oracle Data Warehouse Connection Pool, logical request hash edb0c7c0, physical request hash 87553d2a: [[
select sum(D1.c1) over (partition by D1.c4, D1.c2) as c1,
D1.c2 as c2,
D1.c3 as c3,
D1.c4 as c4,
sum(D1.c5) over (partition by D1.c6, D1.c4, D1.c2) as c5,
D1.c6 as c6
from
(select count(T84444.ORDER_WID) as c1,
T67365.CUST_VALUE_NAME as c2,
T157680.NAME as c3,
T157680.INTEGRATION_ID as c4,
sum(T84444.ORDER_NRC) as c5,
T67058.OPTY_O_REVN as c6
from
W_OPTY_D T67058 /* Dim_W_OPTY_D */ ,
W_PARTY_ORG_D T67365,
W_ORDER_F T84444 /* Fact_W_ORDER_F */ ,
W_PARTY_D T157680
where ( T67058.ROW_WID = T84444.OPTY_WID and T67365.ROW_WID = T157680.PARTY_ORG_WID and T84444.CUSTOMER_WID = T157680.ROW_WID )
group by T67058.OPTY_O_REVN, T67365.CUST_VALUE_NAME, T157680.NAME, T157680.INTEGRATION_ID
) D1
order by c4, c6
Below is the physical SQL that uses 2 Database
select T68071.QUOTE_NUM as c1,
T116081.CURRENT_BASE_POSTN as c2,
T66755.PER_NAME_MONTH as c3,
T68071.STATUS_I as c4,
T68071.QUOTE_TYPE_I as c5,
T68071.SUB_TYPE_I as c6,
T84523.ROW_WID as c7
from
W_POSITION_D T74722 /* Dim_W_POSITION_D */ ,
W_QUOTE_D T68071 /* Dim_W_QUOTE_D */ ,
W_QUOTE_F T84523 /* Fact_W_QUOTE_F */ ,
W_DAY_D T66755 /* Dim_W_DAY_D_Common */ ,
W_POSITION_DH T116081 /* Dim_W_POSITION_DH_Position_Hierarchy */
where ( T66755.ROW_WID = T84523.OPEN_DT_WID and T68071.ROW_WID = T84523.QUOTE_WID and T74722.ROW_WID = T84523.PR_EMP_POS_WID and T74722.ROW_WID = T116081.POSITION_WID and T84523.PR_EMP_POSTN_DH_WID = T116081.ROW_WID )
order by c7
[2012-10-30T11:51:42.000+00:00] [OracleBIServerComponent] [TRACE:2] [USER-18] [] [ecid: 352c537d7893ee94:-5718ddd6:13aaccb7670:-8000-0000000000005cb8] [tid: f61fc700] [requestid: 45ca0007] [sessionid: 45ca0000] [username: joshua.l.manego.iii] -------------------- Sending query to database named OLAP_OBIEE (id: <<1204144>>), connection pool named Connection Pool, logical request hash c180fd3b, physical request hash a2e8b0d6: [[
select T315910.NIVEL_APPROVACAO as c1,
T315910.ALCADA_DESCONTO as c2,
T315910.ROW_WID as c3
from
W_QUOTEITEM_F T315910
order by c3
Based on what you said, so it is impossible to merge the physical SQL if we use 2 Database right?
Your effort in answering to my question is much appreciated, Thank you.

4EA2 the Detail display for views does not show comments for the view

I am running in an Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production environment.
The Detail tab for a View does not show comments added for the view. I would like to request that the Detail tab be modified to display any comments added for the view.
This is important for me because I want to use the Generate DB doc function (from the right-click menu linked to schemas), to generate documentation, and that function uses the same format as the Detail Tab. The View Comments are important for my users.

Hi Penny Halsall,
Kindly check if that Facebook page can be followed by the public. If the profile can't be followed by the public, then the widget won't work as accepted.
Facebook provides instructions to check/do this here: https://www.facebook.com/help/201148673283205
OR
You can generate the associated HTML code from this page :
https://developers.facebook.com/docs/plugins/
Regards
Sonam

IOS 7 Calendar Day View does not show any all-day events ?

Hi,
I realize that iOS 7 Calendar Day View does not show any all-day events.
Is this a bug ?
Any help given is much appreciated.
Thanks and Regards.

Mine brings me right up to the current time, or in the case of another day, it takes me to the first appointment of the day.

Web server log not show byte transfer for php

I added php module to iWS 6.0 it work fine but access log not show byte transfer information for php. How can I do?

The iPlanet Web Server 6.0 access log does not report the number of bytes sent by plugins unless the plugin explicitly sets the Content-length: header. Sun ONE Web Server 6.1 is the first version of Web Server that always reports the number of bytes sent, even if the plugin neglects to set a Content-length: header.

"Library" view does not show ALL photos

My "Library" view is not showing me the last 2 rolls I imported. If I click on the specific year views, I can see the photos, but I expect all photos are displayed in the "Library" view.
While still running iPhoto 5, I imported a roll of images from disk that included photos taken at the end of Dec 2005 and in Jan 2006. These are the photos that do not show in the "Library" view. This was happening with iPhoto 5 and is still happening with iPhoto 6.
Any suggestions for getting all photos to shwo in the "Library" view ?
Thanks,
Eliot

Thanks -- I figured out my problem...
Since iPhoto now seems to group items into "rolls", I had imported images from several different dates. The first image was from Sep'05, so it placed ALL the images imported, even those from Jan'06, with the Sep'05 photo in the middle of of my "Library" view.
Is there a way to have the "Library" view sort in date order instead of by imported roll ?
Thanks,
Eliot

Crystal HTML viewer will not show embedded image from Infoview image store

I am having an issue with the html and dhtml viewers not showing an image I have embedded inside a crystal report. The image has been stored in infoview and embedded into the report from that source. Using the Crystal ActiveX viewer works fine in this case and shows the image. The html viewers however show the blank box with the red X in the top left corner when Internet explorer can't find an image.
Now, if I right click on the image and get it's properties I get this URL:
http://vsx2af0x/crystalreportviewers115/imagehandlerdotnetbridge.aspx?dynamicimage={B8FDE586-08D3-4A14-896C-0FE19AC3DB90}.png
If I take that url and try to load it directly through Internet explorer I get the following error:
Exception of type 'System.OutOfMemoryException' was thrown.
The file is small and only about 20k in size. If someone can help that would be greatly appreciated.
Thanks

Unfortunately I have been unable to remove the plug-in. The files is not locked, or shared, but my operating systems thinks it is.
What happens, when you try?
When I try to delete the plug-in from
/Library/Application Support/Aperture/Plug-Ins/Google/Analog Efex Pro/
with ⌘⌫, I simply get the pop-up panel to enter my administrator password, and the plug-in will be moved to the Trash:
Don't forget to quit Aperture, before trying to remove the plug-in and to log off and on.

UDF Value not showing in SQL

Dear Experts...
Here is a strange situation in my DB. I have some UDF on A/P Invoice for TAX details print preview.
UDF Values are properly showing in SAP but not in SQL in same table, Same document they are blank in SQL.
I can't understand why SQL does not showing me Value of UDF.
Regards,
Ravi

Hi Ravi,
Run below query in query generator for specific document number and check if udf values are shown or not?
SELECT T0.DocNum, T0.CardCode As 'Vendor Code',T0.CardName As 'Vendor Name', T0.NumAtCard As 'Vendor Ref. No.', T0.DocDate, T0.TaxDate, T0.DocTotal - T0.VatSum As 'Basic Value of Goods', T0.U_CENVAT As 'CENVAT', T0.U_ECess, T0.U_HSCess, T0.U_VAT_4, T0.U_Add_VAT1, T0.U_VAT_12,
T0.U_Add_VAT2, T0.U_CST2, T0.U_CST4, T0.U_CST5, T0.U_Service_Tax, T0.U_ST_ECess, T0.U_ST_HSCess,T0.TotalExpns As 'Others',T0.DocTotal - T0.VATSUM As 'Total' FROM OPCH T0 WHERE T0.docType = 'I' and T0.DocNum=[%0]
Thanks,
Neetu

SQL Server Usage Summary page, the count of user/device: does not show for SQL Server 2008

Does MAP tool capture User Summary (count of users, their details) for SQL Server 2008?
At my end, its working for SQL Server 2012 but not showing User Summary for SQL Server 2008..
Does the User Summary only works for SQL Server 2008 Enterprise edition as one of the thread points out?

This is from the
Wiki article:
SQL Server 2008 Enterprise and Datacenter Editions introduced audit event configuration for Windows security logging, which enabled SQL Server 2008 to log logon events to the Windows Security log. The table below shows which versions and editions have the Audit
feature that is needed to record the logon events. MAP cannot obtain user and device access information for any other editions or any older versions of SQL Server.
Datacenter
Enterprise
Business Intelligence
Standard
Workgroup
Web
Express
SQL Server 2008
N/A
Yes
N/A
No
No
No
No
SQL Server 2008 R2
Yes
Yes
N/A
No
No
No
No
SQL Server 2012
N/A
Yes
Yes
Yes
N/A
Yes
Yes
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

Table views/sprocs not showing in Data Source Explorer

i have a database connection and is in good health. the tree node for the database lists all of the folders expected, but only the Tables folder is populated with actual tables in the database. the views and stored procedures are not showing even witht the filters disabled. on the database i granted dbo rights to the user i am connecting with. using flex builder 3, flex 3 and sql server 2000.

Hi Himanshu
Few fields does not work from particular table. you need to try different table for those fields. those fields could be arranged differently.
This is neither configuration nor application issue.
Also check your fields are from transparent table or not...

OrgChart 3.0 - Reporting Structure - Portrait View is not showing portrait

Hi,
I have enabled the Reporting Structure in the OrgChart.
Everything works, but the portrait is not showing in the OrgChart when I have selected Portrait view for the position.
Portrait is showing on the Details Panel of the Position.
Portrait is also showing in the Organization Chart (not in Reporting Structure).
This error shows in Reporting Structure:
16 Feb 2011 15:40:59 ERROR com.nakisa.Logger - Hrwpc_Rfc_Ep_Read_Photo_Uri.runEmployeeReadPhotoURI() : Cannot identify key field or value. Whereclause :: (Object_ID='80000001')
16 Feb 2011 15:40:59 WARN com.nakisa.Logger - Detail - CurrentPositionPortrait : FetchData : Could not fetch data for details.
16 Feb 2011 15:40:59 WARN com.nakisa.Logger - Details - ManagerPhoto : Render : Failed because no data is available.
If the position has no PERNR, the log looks like this:
16 Feb 2011 16:14:35 ERROR com.nakisa.Logger - Hrwpc_Rfc_Ep_Read_Photo_Uri.runEmployeeReadPhotoURI() : Cannot identify key field or value. Whereclause :: ( (Pernr is null) or (Pernr='') )
I am guessing could it be the keyword in the WHERE clause that caused the FM in ECC couldn't be called properly.
Anyone else has this problem?

Hi Jack,
This function is actually called by the class BAPI_Employee_GetDetails, which is a Nakisa class and not in SAP. Therefore I would raise an OSS note. There are a number of fixes to the SMP build that you have that will be in a build provided by Nakisa.
Best regards,
Luke

Movies are in List view and not showing in Movies view

When I down load movies, they are appearing in the List view, but are not showing up in the Movies icon view. How do I fix this? I'm on iTunes 11.01.1

Right mouse click on a Movie and select Get Info
On the options Tab you probably have the value Home Video showing. Change it to Movie and the film will show up in the right place.
It seems that iTunes assigns it to Home Movies when you import it unless it is explicitly tagged as movie or TV show etc

Month view does not show Multi Day events

I know there has been a few post about this subject, but I've found no answer. Is there a fix for this problem? Multi Day events (Not All Day) only show up on the first day in month view (fine in week view). BUT ... if you print the month view the event shows on all the days, weird. I think I am going to be forced to go to a Microsoft product if this can't be resolved. I is too easy to double book appointments if you think that day is clear. Please help.

I've just come across this most dangerous of flaws. I wonder how Apple staff manage multiple-day events without missing anything.
I've submitted the following to iCal Feedback:
http://www.apple.com/feedback/ical.html
Events (not all-day) starting on one day and finishing on another do not show up properly in iCal month view. This is because you only show the start time, which is really confusing when trying to organise diaries.
The iPhone month list view would be a model to sort this out, showing start time on the first day, "Ends" on the last day and "All Day" on intermediary days.
Please sort this out as this is where Outlook really beats Mac.

Problem with PDF viewing Colors not showing correctly (or black and white)

My iMac and my Macbook are both not showing the pictures in a PDF correctly. My collegue who uses a Macbook has no issues.
Im using version 10.7.5 on my macs.
I have tried using the standard ' Preview' as wel as two different free PDF vieuwers from the Appstore.
Also the sender of the document has no issues as wel with the PDF document she made with Indesign.
I'm sure it has to do with my computers, but where do I have to look?
Thanks for helping.
Anything that might be helpfull.

Since InDesign documents are truly PDF compliant I would, were I you, use a truly PDF compliant viewer - Adobe Reader.
To learn how Preview can really screw up a PDF document (and this is just a simple form) see -> http://khkonsulting.com/2013/06/preview-app-killer-of-pdf-files/.
Clinton

View log not showing physical SQL generated in OBIEE 11.1.1.6.7

Similar Messages

Maybe you are looking for