View of docking station

My docking station view has all of a sudden been miniaturised! not sure how that happened. I would like to restore it to regular size

Hey, sorry. found it and figured it out. That's what I love about my apple. I can use it!

Similar Messages

  • HP Zbook 15, external monitor connected to docking station issue

    Dear all
    I have bought a HP Zbook 15 laptop and installed Ubuntu 12.04. It does not show anything on the external monitor when I mount the laptop on the docking station. 
    After installing the Ubuntu 12.04 and putting it on the docking station for the first time, I got this problem:
    "If an ACPI driver is available for this device, you should use it instead of the native driver". I have attached the whole log file. Then, I installed the latest Nvidia driver, and restarted the machine. This time, I do not see that error message; however, I cannot see anything on my external monitor which is connected to the docking station. Can you please tell me how to fix this problem?
    Best regards,
    Murtaza
    I did not find a way to attach the log file, so I put it here:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.13.0-32-generic (buildd@phianna) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #57~precise1-Ubuntu SMP Tue Jul 15 03:51:20 UTC 2014 (Ubuntu 3.13.0-32.57~precise1-generic 3.13.11.4)
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=062ea7e8-5c86-4852-ba25-0372be603607 ro quiet splash vt.handoff=7
    [ 0.000000] KERNEL supported cpus:
    [ 0.000000] Intel GenuineIntel
    [ 0.000000] AMD AuthenticAMD
    [ 0.000000] Centaur CentaurHauls
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000044b7efff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000044b7f000-0x0000000045e7efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000045e7f000-0x0000000045f7efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x0000000045f7f000-0x0000000045ffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x0000000045fff000-0x0000000045ffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000046000000-0x000000004f1fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004aedfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Hewlett-Packard HP ZBook 15/1909, BIOS L70 Ver. 01.30 12/08/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x4aee00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect
    [ 0.000000] 1 base 0000000000 mask 7FC0000000 write-back
    [ 0.000000] 2 base 0040000000 mask 7FFC000000 write-back
    [ 0.000000] 3 base 0044000000 mask 7FFE000000 write-back
    [ 0.000000] 4 base 0046000000 mask 7FFF000000 uncachable
    [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
    [ 0.000000] 6 base 0200000000 mask 7E00000000 write-back
    [ 0.000000] 7 base 0400000000 mask 7F80000000 write-back
    [ 0.000000] 8 base 0480000000 mask 7FC0000000 write-back
    [ 0.000000] 9 base 04B0000000 mask 7FF0000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x46000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
    [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
    [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x4aec00000-0x4aedfffff]
    [ 0.000000] [mem 0x4aec00000-0x4aedfffff] page 2M
    [ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x4ac000000-0x4aebfffff]
    [ 0.000000] [mem 0x4ac000000-0x4aebfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x480000000-0x4abffffff]
    [ 0.000000] [mem 0x480000000-0x4abffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x44b7efff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x449fffff] page 2M
    [ 0.000000] [mem 0x44a00000-0x44b7efff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x45fff000-0x45ffffff]
    [ 0.000000] [mem 0x45fff000-0x45ffffff] page 4k
    [ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x47fffffff]
    [ 0.000000] [mem 0x100000000-0x47fffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x35be0000-0x36de7fff]
    [ 0.000000] ACPI: RSDP 00000000000f3060 000024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 0000000045ffe120 0000A4 (v01 HPQOEM SLIC-MPC 00000001 01000013)
    [ 0.000000] ACPI: FACP 0000000045ffc000 00010C (v05 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: DSDT 0000000045fd1000 0257CC (v02 HPQOEM 1909 00000001 INTL 20110112)
    [ 0.000000] ACPI: FACS 0000000045e31000 000040
    [ 0.000000] ACPI: HPET 0000000045ffb000 000038 (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: APIC 0000000045ffa000 0000BC (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: MCFG 0000000045ff9000 00003C (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: TCPA 0000000045ff7000 000032 (v02 HPQOEM 1909 00000000 HP 00000001)
    [ 0.000000] ACPI: SSDT 0000000045fce000 000466 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fcd000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
    [ 0.000000] ACPI: SLIC 0000000045fcc000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
    [ 0.000000] ACPI: FPDT 0000000045fca000 000044 (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: BGRT 0000000045fc9000 000038 (v00 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: SSDT 0000000045fc3000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fc2000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fc1000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fc0000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fbd000 002F11 (v01 HP NVSGTBL 00001000 INTL 20110112)
    [ 0.000000] ACPI: ASF! 0000000045ff8000 0000A5 (v32 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000004aedfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x4aedfffff]
    [ 0.000000] NODE_DATA [mem 0x4aedf9000-0x4aedfdfff]
    [ 0.000000] [ffffea0000000000-ffffea0012bfffff] PMD -> [ffff88049e600000-ffff8804ae3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x4aedfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x44b7efff]
    [ 0.000000] node 0: [mem 0x45fff000-0x45ffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x4aedfffff]
    [ 0.000000] On node 0 totalpages: 4143388
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 4334 pages used for memmap
    [ 0.000000] DMA32 zone: 277376 pages, LIFO batch:31
    [ 0.000000] Normal zone: 60344 pages used for memmap
    [ 0.000000] Normal zone: 3862016 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x44b7f000-0x45e7efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x45e7f000-0x45f7efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x45f7f000-0x45ffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x46000000-0x4f1fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x4f200000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
    [ 0.000000] e820: [mem 0x4f200000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8804aea00000 s86336 r8192 d24256 u262144
    [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4078625
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=062ea7e8-5c86-4852-ba25-0372be603607 ro quiet splash vt.handoff=7
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 16211348K/16573552K available (7602K kernel code, 1137K rwdata, 3484K rodata, 1356K init, 1440K bss, 362204K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
    [ 0.000000] Offload RCU callbacks from all CPUs
    [ 0.000000] Offload RCU callbacks from CPUs: 0-7.
    [ 0.000000] NR_IRQS:16640 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 66584576 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration failed
    [ 0.008000] tsc: PIT calibration matches HPET. 1 loops
    [ 0.008000] tsc: Detected 2693.754 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.50 BogoMIPS (lpj=10775016)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000024] Security Framework initialized
    [ 0.000038] AppArmor: AppArmor initialized
    [ 0.000039] Yama: becoming mindful.
    [ 0.000989] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.003366] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.004363] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.004378] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.004573] Initializing cgroup subsys memory
    [ 0.004578] Initializing cgroup subsys devices
    [ 0.004579] Initializing cgroup subsys freezer
    [ 0.004581] Initializing cgroup subsys blkio
    [ 0.004582] Initializing cgroup subsys perf_event
    [ 0.004584] Initializing cgroup subsys hugetlb
    [ 0.004602] CPU: Physical Processor ID: 0
    [ 0.004603] CPU: Processor Core ID: 0
    [ 0.004607] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.004607] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.005456] mce: CPU supports 9 MCE banks
    [ 0.005469] CPU0: Thermal monitoring enabled (TM1)
    [ 0.005479] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    [ 0.005479] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
    [ 0.005479] tlb_flushall_shift: 6
    [ 0.005975] Freeing SMP alternatives memory: 32K (ffffffff81e71000 - ffffffff81e79000)
    [ 0.006826] ACPI: Core revision 20131115
    [ 0.015427] ACPI: All ACPI Tables successfully acquired
    [ 0.015707] ftrace: allocating 31443 entries in 123 pages
    [ 0.027389] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.067059] smpboot: CPU0: Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz (fam: 06, model: 3c, stepping: 03)
    [ 0.067065] TSC deadline timer enabled
    [ 0.067072] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.067078] ... version: 3
    [ 0.067079] ... bit width: 48
    [ 0.067079] ... generic registers: 4
    [ 0.067080] ... value mask: 0000ffffffffffff
    [ 0.067081] ... max period: 0000ffffffffffff
    [ 0.067082] ... fixed-purpose events: 3
    [ 0.067082] ... event mask: 000000070000000f
    [ 0.068367] x86: Booting SMP configuration:
    [ 0.082362] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.068369] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
    [ 0.166721] x86: Booted up 1 node, 8 CPUs
    [ 0.166724] smpboot: Total of 8 processors activated (43100.06 BogoMIPS)
    [ 0.174163] devtmpfs: initialized
    [ 0.177951] EVM: security.selinux
    [ 0.177953] EVM: security.SMACK64
    [ 0.177953] EVM: security.ima
    [ 0.177954] EVM: security.capability
    [ 0.177989] PM: Registering ACPI NVS region [mem 0x45e7f000-0x45f7efff] (1048576 bytes)
    [ 0.178592] pinctrl core: initialized pinctrl subsystem
    [ 0.178637] regulator-dummy: no parameters
    [ 0.178663] RTC time: 20:49:45, date: 04/17/15
    [ 0.178689] NET: Registered protocol family 16
    [ 0.178764] cpuidle: using governor ladder
    [ 0.178766] cpuidle: using governor menu
    [ 0.178795] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.178796] ACPI: bus type PCI registered
    [ 0.178798] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.178847] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.178849] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.194702] PCI: Using configuration type 1 for base access
    [ 0.194961] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.194962] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.194963] mtrr: corrected configuration.
    [ 0.195520] bio: create slab <bio-0> at 0
    [ 0.195643] ACPI: Added _OSI(Module Device)
    [ 0.195645] ACPI: Added _OSI(Processor Device)
    [ 0.195645] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.195646] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.218003] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.246072] ACPI: SSDT 0000000045de3918 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
    [ 0.246512] ACPI: Dynamic OEM Table Load:
    [ 0.246513] ACPI: SSDT (null) 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
    [ 0.250171] ACPI: SSDT 0000000045de4698 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
    [ 0.250664] ACPI: Dynamic OEM Table Load:
    [ 0.250666] ACPI: SSDT (null) 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
    [ 0.254062] ACPI: SSDT 0000000045de2d98 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
    [ 0.254498] ACPI: Dynamic OEM Table Load:
    [ 0.254499] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
    [ 2.268291] ACPI: Interpreter enabled
    [ 2.268297] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
    [ 2.268302] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
    [ 2.268314] ACPI: (supports S0 S3 S4 S5)
    [ 2.268315] ACPI: Using IOAPIC for interrupt routing
    [ 2.268332] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 2.268475] ACPI: No dock devices found.
    [ 2.270541] ACPI: Power Resource [APPR] (off)
    [ 2.287340] ACPI: Power Resource [COMP] (on)
    [ 2.287629] ACPI: Power Resource [LPP] (on)
    [ 2.296206] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 2.296211] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 2.296871] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
    [ 2.297740] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
    [ 2.298295] PCI host bridge to bus 0000:00
    [ 2.298297] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 2.298299] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 2.298300] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 2.298301] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 2.298302] pci_bus 0000:00: root bus resource [mem 0x4f200000-0xdfffffff]
    [ 2.298304] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
    [ 2.298305] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
    [ 2.298311] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    [ 2.298395] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
    [ 2.298423] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 2.298494] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
    [ 2.298503] pci 0000:00:02.0: reg 0x10: [mem 0xcc400000-0xcc7fffff 64bit]
    [ 2.298508] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 2.298512] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
    [ 2.298605] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    [ 2.298620] pci 0000:00:14.0: reg 0x10: [mem 0xcca20000-0xcca2ffff 64bit]
    [ 2.298666] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 2.298721] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 2.298748] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    [ 2.298767] pci 0000:00:16.0: reg 0x10: [mem 0xcca35000-0xcca3500f 64bit]
    [ 2.298825] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 2.298896] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
    [ 2.298911] pci 0000:00:16.3: reg 0x10: [io 0x60b0-0x60b7]
    [ 2.298919] pci 0000:00:16.3: reg 0x14: [mem 0xcca3c000-0xcca3cfff]
    [ 2.299046] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
    [ 2.299061] pci 0000:00:19.0: reg 0x10: [mem 0xcca00000-0xcca1ffff]
    [ 2.299069] pci 0000:00:19.0: reg 0x14: [mem 0xcca3b000-0xcca3bfff]
    [ 2.299076] pci 0000:00:19.0: reg 0x18: [io 0x6080-0x609f]
    [ 2.299131] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 2.299180] pci 0000:00:19.0: System wakeup disabled by ACPI
    [ 2.299207] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
    [ 2.299225] pci 0000:00:1a.0: reg 0x10: [mem 0xcca3a000-0xcca3a3ff]
    [ 2.299306] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 2.299357] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 2.299384] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    [ 2.299397] pci 0000:00:1b.0: reg 0x10: [mem 0xcca30000-0xcca33fff 64bit]
    [ 2.299455] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 2.299525] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    [ 2.299590] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 2.299664] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
    [ 2.299721] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 2.299772] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 2.299795] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
    [ 2.299853] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
    [ 2.299904] pci 0000:00:1c.6: System wakeup disabled by ACPI
    [ 2.299928] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
    [ 2.299986] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
    [ 2.300037] pci 0000:00:1c.7: System wakeup disabled by ACPI
    [ 2.300063] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
    [ 2.300083] pci 0000:00:1d.0: reg 0x10: [mem 0xcca39000-0xcca393ff]
    [ 2.300163] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 2.300215] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 2.300241] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100
    [ 2.300400] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    [ 2.300414] pci 0000:00:1f.2: reg 0x10: [io 0x60a8-0x60af]
    [ 2.300421] pci 0000:00:1f.2: reg 0x14: [io 0x60bc-0x60bf]
    [ 2.300428] pci 0000:00:1f.2: reg 0x18: [io 0x60a0-0x60a7]
    [ 2.300435] pci 0000:00:1f.2: reg 0x1c: [io 0x60b8-0x60bb]
    [ 2.300442] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
    [ 2.300448] pci 0000:00:1f.2: reg 0x24: [mem 0xcca38000-0xcca387ff]
    [ 2.300482] pci 0000:00:1f.2: PME# supported from D3hot
    [ 2.300546] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
    [ 2.300560] pci 0000:00:1f.3: reg 0x10: [mem 0xcca34000-0xcca340ff 64bit]
    [ 2.300578] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
    [ 2.300706] pci 0000:01:00.0: [10de:11fc] type 00 class 0x030000
    [ 2.300719] pci 0000:01:00.0: reg 0x10: [mem 0xcb000000-0xcbffffff]
    [ 2.300733] pci 0000:01:00.0: reg 0x14: [mem 0x50000000-0x5fffffff 64bit pref]
    [ 2.300746] pci 0000:01:00.0: reg 0x1c: [mem 0x60000000-0x61ffffff 64bit pref]
    [ 2.300755] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
    [ 2.300763] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 2.300868] pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
    [ 2.300883] pci 0000:01:00.1: reg 0x10: [mem 0xcc000000-0xcc003fff]
    [ 2.306710] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 2.306712] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    [ 2.306714] pci 0000:00:01.0: bridge window [mem 0xcb000000-0xcc0fffff]
    [ 2.306717] pci 0000:00:01.0: bridge window [mem 0x50000000-0x61ffffff 64bit pref]
    [ 2.306776] acpiphp: Slot [1] registered
    [ 2.306781] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
    [ 2.306787] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
    [ 2.306792] pci 0000:00:1c.0: bridge window [mem 0x70000000-0x91ffffff 64bit pref]
    [ 2.306850] acpiphp: Slot [1-1] registered
    [ 2.306888] pci 0000:00:1c.4: PCI bridge to [bus 3b-5b]
    [ 2.306892] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
    [ 2.306895] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb3ffffff]
    [ 2.306998] pci 0000:5c:00.0: [8086:088e] type 00 class 0x028000
    [ 2.307064] pci 0000:5c:00.0: reg 0x10: [mem 0xcc900000-0xcc901fff 64bit]
    [ 2.307300] pci 0000:5c:00.0: PME# supported from D0 D3hot D3cold
    [ 2.314738] pci 0000:00:1c.6: PCI bridge to [bus 5c]
    [ 2.314743] pci 0000:00:1c.6: bridge window [mem 0xcc900000-0xcc9fffff]
    [ 2.314860] pci 0000:5d:00.0: [10ec:5249] type 00 class 0xff0000
    [ 2.314923] pci 0000:5d:00.0: reg 0x10: [mem 0xcc800000-0xcc800fff]
    [ 2.315269] pci 0000:5d:00.0: supports D1 D2
    [ 2.315270] pci 0000:5d:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 2.322736] pci 0000:00:1c.7: PCI bridge to [bus 5d]
    [ 2.322741] pci 0000:00:1c.7: bridge window [mem 0xcc800000-0xcc8fffff]
    [ 2.322799] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 2.323663] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323700] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323734] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323768] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 2.323802] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323835] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 2.323869] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 2.323903] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 2.324240] ACPI: Enabled 7 GPEs in block 00 to 3F
    [ 2.324246] ACPI: \_SB_.PCI0: notify handler is installed
    [ 2.324298] Found 1 acpi root devices
    [ 2.324457] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 2.324517] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 2.324521] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 2.324522] vgaarb: loaded
    [ 2.324523] vgaarb: bridge control possible 0000:01:00.0
    [ 2.324524] vgaarb: no bridge control possible 0000:00:02.0
    [ 2.324635] SCSI subsystem initialized
    [ 2.324664] libata version 3.00 loaded.
    [ 2.324678] ACPI: bus type USB registered
    [ 2.324688] usbcore: registered new interface driver usbfs
    [ 2.324693] usbcore: registered new interface driver hub
    [ 2.324707] usbcore: registered new device driver usb
    [ 2.324786] PCI: Using ACPI for IRQ routing
    [ 2.330294] PCI: pci_cache_line_size set to 64 bytes
    [ 2.330342] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
    [ 2.330343] e820: reserve RAM buffer [mem 0x44b7f000-0x47ffffff]
    [ 2.330345] e820: reserve RAM buffer [mem 0x46000000-0x47ffffff]
    [ 2.330346] e820: reserve RAM buffer [mem 0x4aee00000-0x4afffffff]
    [ 2.330402] NetLabel: Initializing
    [ 2.330403] NetLabel: domain hash size = 128
    [ 2.330403] NetLabel: protocols = UNLABELED CIPSOv4
    [ 2.330412] NetLabel: unlabeled traffic allowed by default
    [ 2.330452] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 2.330457] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 2.332489] Switched to clocksource hpet
    [ 2.335878] AppArmor: AppArmor Filesystem Enabled
    [ 2.335891] pnp: PnP ACPI init
    [ 2.335898] ACPI: bus type PNP registered
    [ 2.336030] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 2.336032] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
    [ 2.336033] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 2.336035] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 2.336036] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 2.336037] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 2.336039] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 2.336040] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 2.336042] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 2.336043] system 00:00: [mem 0x4f210000-0x4f21ffff] has been reserved
    [ 2.336045] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.336141] pnp 00:01: [dma 4]
    [ 2.336154] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 2.336171] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 2.336216] pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
    [ 2.336288] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 2.336322] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 2.336351] system 00:06: [io 0x0200-0x027f] has been reserved
    [ 2.336353] system 00:06: [io 0xffff] has been reserved
    [ 2.336354] system 00:06: [io 0xffff] has been reserved
    [ 2.336355] system 00:06: [io 0xffff] has been reserved
    [ 2.336357] system 00:06: [io 0x1800-0x18fe] could not be reserved
    [ 2.336358] system 00:06: [io 0xef80-0xef9f] has been reserved
    [ 2.336360] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.336393] system 00:07: [io 0x0800-0x087f] has been reserved
    [ 2.336395] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.336413] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 2.336712] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
    [ 2.336939] pnp 00:0a: [dma 0 disabled]
    [ 2.336985] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 2.337008] pnp 00:0b: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
    [ 2.337027] pnp 00:0c: Plug and Play ACPI device, IDs SYN300a SYN0100 SYN0002 PNP0f13 (active)
    [ 2.337195] pnp 00:0d: Plug and Play ACPI device, IDs HPQ6007 (active)
    [ 2.337255] system 00:0e: [mem 0x20000000-0x201fffff] could not be reserved
    [ 2.337257] system 00:0e: [mem 0x40004000-0x40004fff] could not be reserved
    [ 2.337259] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 2.337398] pnp: PnP ACPI: found 15 devices
    [ 2.337399] ACPI: bus type PNP unregistered
    [ 2.343175] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 2.343188] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-3a] add_size 1000
    [ 2.343196] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3b-5b] add_size 200000
    [ 2.343209] pci 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 5d] add_size 1000
    [ 2.343210] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 5d] add_size 200000
    [ 2.343215] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 2.343216] pci 0000:00:1c.7: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 2.343217] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 2.343219] pci 0000:00:1c.7: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 2.343222] pci 0000:00:1c.4: BAR 15: assigned [mem 0x4f300000-0x4f4fffff 64bit pref]
    [ 2.343224] pci 0000:00:1c.7: BAR 15: assigned [mem 0x4f500000-0x4f6fffff 64bit pref]
    [ 2.343225] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 2.343227] pci 0000:00:1c.7: BAR 13: assigned [io 0x7000-0x7fff]
    [ 2.343229] pci 0000:01:00.0: BAR 6: assigned [mem 0xcc080000-0xcc0fffff pref]
    [ 2.343231] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 2.343233] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    [ 2.343235] pci 0000:00:01.0: bridge window [mem 0xcb000000-0xcc0fffff]
    [ 2.343237] pci 0000:00:01.0: bridge window [mem 0x50000000-0x61ffffff 64bit pref]
    [ 2.343240] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
    [ 2.343243] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 2.343247] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
    [ 2.343251] pci 0000:00:1c.0: bridge window [mem 0x70000000-0x91ffffff 64bit pref]
    [ 2.343256] pci 0000:00:1c.4: PCI bridge to [bus 3b-5b]
    [ 2.343259] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
    [ 2.343263] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb3ffffff]
    [ 2.343267] pci 0000:00:1c.4: bridge window [mem 0x4f300000-0x4f4fffff 64bit pref]
    [ 2.343272] pci 0000:00:1c.6: PCI bridge to [bus 5c]
    [ 2.343276] pci 0000:00:1c.6: bridge window [mem 0xcc900000-0xcc9fffff]
    [ 2.343283] pci 0000:00:1c.7: PCI bridge to [bus 5d]
    [ 2.343285] pci 0000:00:1c.7: bridge window [io 0x7000-0x7fff]
    [ 2.343289] pci 0000:00:1c.7: bridge window [mem 0xcc800000-0xcc8fffff]
    [ 2.343293] pci 0000:00:1c.7: bridge window [mem 0x4f500000-0x4f6fffff 64bit pref]
    [ 2.343298] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 2.343300] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 2.343301] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 2.343302] pci_bus 0000:00: resource 7 [mem 0x4f200000-0xdfffffff]
    [ 2.343303] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
    [ 2.343304] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
    [ 2.343306] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
    [ 2.343307] pci_bus 0000:01: resource 1 [mem 0xcb000000-0xcc0fffff]
    [ 2.343308] pci_bus 0000:01: resource 2 [mem 0x50000000-0x61ffffff 64bit pref]
    [ 2.343309] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 2.343311] pci_bus 0000:02: resource 1 [mem 0xb4000000-0xca0fffff]
    [ 2.343312] pci_bus 0000:02: resource 2 [mem 0x70000000-0x91ffffff 64bit pref]
    [ 2.343313] pci_bus 0000:3b: resource 0 [io 0x3000-0x4fff]
    [ 2.343314] pci_bus 0000:3b: resource 1 [mem 0xb0000000-0xb3ffffff]
    [ 2.343315] pci_bus 0000:3b: resource 2 [mem 0x4f300000-0x4f4fffff 64bit pref]
    [ 2.343317] pci_bus 0000:5c: resource 1 [mem 0xcc900000-0xcc9fffff]
    [ 2.343318] pci_bus 0000:5d: resource 0 [io 0x7000-0x7fff]
    [ 2.343319] pci_bus 0000:5d: resource 1 [mem 0xcc800000-0xcc8fffff]
    [ 2.343320] pci_bus 0000:5d: resource 2 [mem 0x4f500000-0x4f6fffff 64bit pref]
    [ 2.343341] NET: Registered protocol family 2
    [ 2.343489] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 2.343658] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 2.343769] TCP: Hash tables configured (established 131072 bind 65536)
    [ 2.343782] TCP: reno registered
    [ 2.343798] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 2.343840] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 2.343907] NET: Registered protocol family 1
    [ 2.343916] pci 0000:00:02.0: Boot video device
    [ 2.343923] pci 0000:00:14.0: enabling device (0000 -> 0002)
    [ 2.344387] PCI: CLS 64 bytes, default 64
    [ 2.344426] Trying to unpack rootfs image as initramfs...
    [ 2.581584] Freeing initrd memory: 18464K (ffff880035be0000 - ffff880036de8000)
    [ 2.581588] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 2.581590] software IO TLB [mem 0x40b7f000-0x44b7f000] (64MB) mapped at [ffff880040b7f000-ffff880044b7efff]
    [ 2.581814] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581821] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581827] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581834] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581839] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581845] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581851] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581858] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581891] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.581892] Scanning for low memory corruption every 60 seconds
    [ 2.582096] Initialise system trusted keyring
    [ 2.582129] audit: initializing netlink socket (disabled)
    [ 2.582137] type=2000 audit(1429303787.580:1): initialized
    [ 2.605505] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 2.606581] zbud: loaded
    [ 2.606685] VFS: Disk quotas dquot_6.5.2
    [ 2.606715] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 2.606997] fuse init (API version 7.22)
    [ 2.607048] msgmni has been set to 31698
    [ 2.607084] Key type big_key registered
    [ 2.607458] Key type asymmetric registered
    [ 2.607459] Asymmetric key parser 'x509' registered
    [ 2.607478] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 2.607514] io scheduler noop registered
    [ 2.607516] io scheduler deadline registered (default)
    [ 2.607531] io scheduler cfq registered
    [ 2.607686] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 2.608087] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 2.608097] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 2.608122] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 2.608123] vesafb: scrolling: redraw
    [ 2.608124] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 2.608661] vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90011c00000, using 8128k, total 8128k
    [ 2.763515] Console: switching to colour frame buffer device 240x67
    [ 2.917758] fb0: VESA VGA frame buffer device
    [ 2.917770] intel_idle: MWAIT substates: 0x42120
    [ 2.917771] intel_idle: v0.4 model 0x3C
    [ 2.917771] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.917911] ipmi message handler version 39.2
    [ 2.918057] ACPI: AC Adapter [AC] (on-line)
    [ 2.918197] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
    [ 2.918201] ACPI: Sleep Button [SLPB]
    [ 2.918223] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 2.918238] ACPI: Lid Switch [LID]
    [ 2.918260] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [ 2.918261] ACPI: Power Button [PWRF]
    [ 2.943141] thermal LNXTHERM:00: registered as thermal_zone0
    [ 2.943143] ACPI: Thermal Zone [CPUZ] (49 C)
    [ 2.957429] ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
    [ 2.957433] ACPI Error: Method parse/execution failed [\_TZ_.PSL_] (Node ffff88049846d410), AE_NOT_FOUND (20131115/psparse-536)
    [ 2.957437] ACPI Error: Method parse/execution failed [\_TZ_.GFXZ._PSL] (Node ffff88049846d000), AE_NOT_FOUND (20131115/psparse-536)
    [ 2.957440] ACPI: Invalid passive threshold
    [ 2.967568] thermal LNXTHERM:01: registered as thermal_zone1
    [ 2.967569] ACPI: Thermal Zone [GFXZ] (36 C)
    [ 2.982819] thermal LNXTHERM:02: registered as thermal_zone2
    [ 2.982820] ACPI: Thermal Zone [EXTZ] (0 C)
    [ 2.998086] thermal LNXTHERM:03: registered as thermal_zone3
    [ 2.998087] ACPI: Thermal Zone [LOCZ] (0 C)
    [ 3.003351] ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
    [ 3.003354] ACPI Error: Method parse/execution failed [\_TZ_.PSL_] (Node ffff88049846d410), AE_NOT_FOUND (20131115/psparse-536)
    [ 3.003357] ACPI Error: Method parse/execution failed [\_TZ_.BATZ._PSL] (Node ffff88049846d230), AE_NOT_FOUND (20131115/psparse-536)
    [ 3.003360] ACPI: Invalid passive threshold
    [ 3.013372] thermal LNXTHERM:04: registered as thermal_zone4
    [ 3.013374] ACPI: Thermal Zone [BATZ] (28 C)
    [ 3.013559] thermal LNXTHERM:05: registered as thermal_zone5
    [ 3.013560] ACPI: Thermal Zone [PCHZ] (59 C)
    [ 3.013623] thermal LNXTHERM:06: registered as thermal_zone6
    [ 3.013624] ACPI: Thermal Zone [DM1Z] (0 C)
    [ 3.013684] thermal LNXTHERM:07: registered as thermal_zone7
    [ 3.013685] ACPI: Thermal Zone [DM2Z] (0 C)
    [ 3.013706] GHES: HEST is not enabled!
    [ 3.013781] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [ 3.034219] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [ 3.055810] 0000:00:16.3: ttyS4 at I/O 0x60b0 (irq = 19, base_baud = 115200) is a 16550A
    [ 3.056055] Linux agpgart interface v0.103
    [ 3.056183] tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16)
    [ 3.057331] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 3.057335] ACPI: Battery Slot [BAT0] (battery present)
    [ 3.057372] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 3.057375] ACPI: Battery Slot [BAT1] (battery absent)
    [ 3.352138] tpm_tis 00:03: TPM is disabled/deactivated (0x7)
    [ 3.353165] brd: module loaded
    [ 3.353594] loop: module loaded
    [ 3.353831] libphy: Fixed MDIO Bus: probed
    [ 3.353886] tun: Universal TUN/TAP device driver, 1.6
    [ 3.353887] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
    [ 3.353914] PPP generic driver version 2.4.2
    [ 3.353943] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 3.353946] ehci-pci: EHCI PCI platform driver
    [ 3.354051] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 3.354055] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 3.354066] ehci-pci 0000:00:1a.0: debug port 2
    [ 3.357954] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 3.357966] ehci-pci 0000:00:1a.0: irq 16, io mem 0xcca3a000
    [ 3.368127] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 3.368158] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [ 3.368159] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.368161] usb usb1: Product: EHCI Host Controller
    [ 3.368162] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
    [ 3.368163] usb usb1: SerialNumber: 0000:00:1a.0
    [ 3.368233] hub 1-0:1.0: USB hub found
    [ 3.368238] hub 1-0:1.0: 3 ports detected
    [ 3.368420] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 3.368424] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 3.368434] ehci-pci 0000:00:1d.0: debug port 2
    [ 3.372323] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 3.372334] ehci-pci 0000:00:1d.0: irq 17, io mem 0xcca39000
    [ 3.384119] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 3.384147] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    [ 3.384148] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.384149] usb usb2: Product: EHCI Host Controller
    [ 3.384150] usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
    [ 3.384151] usb usb2: SerialNumber: 0000:00:1d.0
    [ 3.384234] hub 2-0:1.0: USB hub found
    [ 3.384238] hub 2-0:1.0: 3 ports detected
    [ 3.384329] ehci-platform: EHCI generic platform driver
    [ 3.384335] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 3.384336] ohci-pci: OHCI PCI platform driver
    [ 3.384342] ohci-platform: OHCI generic platform driver
    [ 3.384346] uhci_hcd: USB Universal Host Controller Interface driver
    [ 3.384439] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 3.384443] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 3.384525] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 3.384540] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
    [ 3.384587] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [ 3.384589] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.384590] usb usb3: Product: xHCI Host Controller
    [ 3.384591] usb usb3: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
    [ 3.384592] usb usb3: SerialNumber: 0000:00:14.0
    [ 3.384673] hub 3-0:1.0: USB hub found
    [ 3.384690] hub 3-0:1.0: 15 ports detected
    [ 3.385431] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 3.385434] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 3.385468] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
    [ 3.385470] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.385471] usb usb4: Product: xHCI Host Controller
    [ 3.385472] usb usb4: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
    [ 3.385473] usb usb4: SerialNumber: 0000:00:14.0
    [ 3.385551] hub 4-0:1.0: USB hub found
    [ 3.385562] hub 4-0:1.0: 6 ports detected
    [ 3.392184] i8042: PNP: PS/2 Controller [PNP0303S2K,PNP0f13S2M] at 0x60,0x64 irq 1,12
    [ 3.393372] i8042: Detected active multiplexing controller, rev 1.1
    [ 3.394020] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 3.394023] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 3.394040] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 3.394051] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 3.394062] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 3.394254] mousedev: PS/2 mouse device common for all mice
    [ 3.394420] rtc_cmos 00:08: RTC can wake from S4
    [ 3.394538] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    [ 3.394563] rtc_cmos 00:08: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 3.394608] device-mapper: uevent: version 1.0.3
    [ 3.394668] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
    [ 3.394673] ledtrig-cpu: registered to indicate activity on CPUs
    [ 3.394743] TCP: cubic registered
    [ 3.394800] NET: Registered protocol family 10
    [ 3.394914] NET: Registered protocol family 17
    [ 3.394922] Key type dns_resolver registered
    [ 3.395160] Loading compiled-in X.509 certificates
    [ 3.395793] Loaded X.509 cert 'Magrathea: Glacier signing key: 223a1a1af7ef14be22890f9d1cc63d083fee59bf'
    [ 3.395800] registered taskstats version 1
    [ 3.397885] Key type trusted registered
    [ 3.399811] Key type encrypted registered
    [ 3.401785] AppArmor: AppArmor sha1 policy hashing enabled
    [ 3.419579] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
    [ 3.460151] tpm_tis 00:03: A TPM error (7) occurred attempting to read a pcr value
    [ 3.460154] IMA: No TPM chip found, activating TPM-bypass!
    [ 3.460705] regulator-dummy: disabling
    [ 3.460903] Magic number: 11:175:852
    [ 3.461055] rtc_cmos 00:08: setting system clock to 2015-04-17 20:49:48 UTC (1429303788)
    [ 3.462218] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [ 3.462219] EDD information not available.
    [ 3.462247] PM: Hibernation image not present or could not be loaded.
    [ 3.463163] Freeing unused kernel memory: 1356K (ffffffff81d1e000 - ffffffff81e71000)
    [ 3.463165] Write protecting the kernel read-only data&colon; 12288k
    [ 3.464381] Freeing unused kernel memory: 580K (ffff88000176f000 - ffff880001800000)
    [ 3.465532] Freeing unused kernel memory: 612K (ffff880001b67000 - ffff880001c00000)
    [ 3.478948] udevd[143]: starting version 175
    [ 3.509828] pps_core: LinuxPPS API ver. 1 registered
    [ 3.509831] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    [ 3.511322] PTP clock support registered
    [ 3.511576] rtsx_pci 0000:5d:00.0: irq 42 for MSI/MSI-X
    [ 3.511591] rtsx_pci 0000:5d:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
    [ 3.513783] ahci 0000:00:1f.2: version 3.0
    [ 3.513949] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 3.513977] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 3.514002] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xd impl SATA mode
    [ 3.514005] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
    [ 3.515548] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [ 3.515549] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [ 3.528600] scsi0 : ahci
    [ 3.528832] scsi1 : ahci
    [ 3.528908] scsi2 : ahci
    [ 3.528979] scsi3 : ahci
    [ 3.529074] scsi4 : ahci
    [ 3.529152] scsi5 : ahci
    [ 3.529185] ata1: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38100 irq 43
    [ 3.529186] ata2: DUMMY
    [ 3.529189] ata3: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38200 irq 43
    [ 3.529191] ata4: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38280 irq 43
    [ 3.529192] ata5: DUMMY
    [ 3.529193] ata6: DUMMY
    [ 3.529421] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    [ 3.529440] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
    [ 3.580099] tsc: Refined TSC clocksource calibration: 2693.762 MHz
    [ 3.596226] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
    [ 3.612542] usb 4-1: New USB device found, idVendor=0424, idProduct=5434
    [ 3.612545] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
    [ 3.612547] usb 4-1: Product: USB5534
    [ 3.612548] usb 4-1: Manufacturer: SMSC
    [ 3.612549] usb 4-1: SerialNumber: 1239567
    [ 3.614189] hub 4-1:1.0: USB hub found
    [ 3.614228] hub 4-1:1.0: 4 ports detected
    [ 3.697128] e1000e 0000:00:19.0 eth0: registered PHC clock
    [ 3.697131] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 5c:b9:01:fc:9d:75
    [ 3.697132] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
    [ 3.697163] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
    [ 3.724083] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 3.848014] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 3.848677] ata1.00: ATA-9: SanDisk SD6SB1M-256G-1006, X231706, max UDMA/100
    [ 3.848680] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 3.849416] ata1.00: configured for UDMA/100
    [ 3.849580] scsi 0:0:0:0: Direct-Access ATA SanDisk SD6SB1M- X231 PQ: 0 ANSI: 5
    [ 3.849710] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 3.849746] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 3.849748] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.849750] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.849764] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.850612] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
    [ 3.851144] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.856328] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
    [ 3.856331] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 3.856471] hub 1-1:1.0: USB hub found
    [ 3.856575] hub 1-1:1.0: 6 ports detected
    [ 3.967974] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 4.100292] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
    [ 4.100295] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 4.100529] hub 2-1:1.0: USB hub found
    [ 4.100626] hub 2-1:1.0: 8 ports detected
    [ 4.167897] ata3: SATA link down (SStatus 0 SControl 300)
    [ 4.267892] usb 3-1: new high-speed USB device number 2 using xhci_hcd
    [ 4.284185] usb 3-1: New USB device found, idVendor=0424, idProduct=5434
    [ 4.284188] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 4.284596] hub 3-1:1.0: USB hub found
    [ 4.284626] hub 3-1:1.0: 4 ports detected
    [ 4.451824] usb 3-5: new full-speed USB device number 3 using xhci_hcd
    [ 4.469313] usb 3-5: New USB device found, idVendor=138a, idProduct=003f
    [ 4.469316] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
    [ 4.469318] usb 3-5: SerialNumber: 0030e4b96e96
    [ 4.487780] ata4: SATA link down (SStatus 0 SControl 300)
    [ 4.530624] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
    [ 4.530627] EXT4-fs (sda5): write access will be enabled during recovery
    [ 4.579770] Switched to clocksource tsc
    [ 4.635700] usb 3-7: new high-speed USB device number 4 using xhci_hcd
    [ 4.702947] EXT4-fs (sda5): orphan cleanup on readonly fs
    [ 4.702996] EXT4-fs (sda5): 2 orphan inodes deleted
    [ 4.702997] EXT4-fs (sda5): recovery complete
    [ 4.706848] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.736086] usb 3-7: New USB device found, idVendor=05c8, idProduct=0369
    [ 4.736089] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 4.736090] usb 3-7: Product: HP HD Webcam
    [ 4.736092] usb 3-7: Manufacturer: SunplusIT INC.
    [ 4.777998] random: init urandom read with 97 bits of entropy available
    [ 4.815946] init: ureadahead main process (382) terminated with status 5
    [ 4.872399] Adding 8390772k swap on /dev/sda6. Priority:-1 extents:1 across:8390772k SSFS
    [ 4.910276] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
    [ 4.910848] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 4.915232] udevd[465]: starting version 175
    [ 4.919590] usb 3-11: new high-speed USB device number 5 using xhci_hcd
    [ 4.937952] usb 3-11: New USB device found, idVendor=03f0, idProduct=521d
    [ 4.937956] usb 3-11: New USB device strings: Mfr=5, Product=4, SerialNumber=0
    [ 4.937959] usb 3-11: Product: HP hs3110 HSPA+ Mobile Broadband Device
    [ 4.937961] usb 3-11: Manufacturer: Hewlett-Packard
    [ 4.941014] lp: driver loaded but no devices found
    [ 4.969070] Initializing HPQ6001 module
    [ 4.969146] input: HP Wireless hotkeys as /devices/virtual/input/input8
    [ 4.977289] wmi: Mapper loaded
    [ 4.985916] [drm] Initialized drm 1.1.0 20060810
    [ 4.991703] hp_accel: laptop model unknown, using default axes configuration
    [ 4.998586] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
    [ 5.004770] parport_pc 00:0a: reported by Plug and Play ACPI
    [ 5.004867] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
    [ 5.013849] [drm] Memory usable by graphics device = 2048M
    [ 5.013854] checking generic (a0000000 7f0000) vs hw (a0000000 10000000)
    [ 5.013856] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 5.013874] Console: switching to colour dummy device 80x25
    [ 5.030434] random: nonblocking pool is initialized
    [ 5.031503] cfg80211: Calling CRDA to update world regulatory domain
    [ 5.036770] ppdev: user-space parallel port driver
    [ 5.039277] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 5.039280] Copyright(c) 2003-2013 Intel Corporation
    [ 5.039419] iwlwifi 0000:5c:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 5.039474] iwlwifi 0000:5c:00.0: irq 46 for MSI/MSI-X
    [ 5.045123] type=1400 audit(1429292990.079:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=725 comm="apparmor_parser"
    [ 5.045130] type=1400 audit(1429292990.079:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
    [ 5.045135] type=1400 audit(1429292990.079:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
    [ 5.045666] type=1400 audit(1429292990.079:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
    [ 5.045672] type=1400 audit(1429292990.079:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
    [ 5.045949] type=1400 audit(1429292990.079:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
    [ 5.049977] Bluetooth: Core ver 2.17
    [ 5.049990] NET: Registered protocol family 31
    [ 5.049991] Bluetooth: HCI device and connection manager initialized
    [ 5.049998] Bluetooth: HCI socket layer initialized
    [ 5.050001] Bluetooth: L2CAP socket layer initialized
    [ 5.050005] Bluetooth: SCO socket layer initialized
    [ 5.051107] iwlwifi 0000:5c:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
    [ 5.057904] Bluetooth: RFCOMM TTY layer initialized
    [ 5.057915] Bluetooth: RFCOMM socket layer initialized
    [ 5.057920] Bluetooth: RFCOMM ver 1.11
    [ 5.061071] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 5.061074] Bluetooth: BNEP filters: protocol multicast
    [ 5.061082] Bluetooth: BNEP socket layer initialized
    [ 5.063649] i915 0000:00:02.0: irq 47 for MSI/MSI-X
    [ 5.063657] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 5.063658] [drm] Driver supports precise vblank timestamp query.
    [ 5.063906] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=nonewns=none
    [ 5.073667] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 5.073671] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
    [ 5.073673] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 5.073676] iwlwifi 0000:5c:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
    [ 5.073733] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
    [ 5.099787] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 5.107517] usb 3-12: new full-speed USB device number 6 using xhci_hcd
    [ 5.107863] lp0: using parport0 (interrupt-driven).
    [ 5.117196] MXM: GUID detected in BIOS
    [ 5.117211] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.127446] usb 3-12: New USB device found, idVendor=8087, idProduct=07da
    [ 5.127450] usb 3-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 5.136368] usbcore: registered new interface driver btusb
    [ 5.139414] init: failsafe main process (863) killed by TERM signal
    [ 5.153066] type=1400 audit(1429292990.187:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=953 comm="apparmor_parser"
    [ 5.153074] type=1400 audit(1429292990.187:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=953 comm="apparmor_parser"
    [ 5.153638] type=1400 audit(1429292990.187:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=953 comm="apparmor_parser"
    [ 5.175774] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.215491] usb 3-1.2: new high-speed USB device number 7 using xhci_hcd
    [ 5.231627] usb 3-1.2: New USB device found, idVendor=0424, idProduct=2512
    [ 5.231630] usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 5.232078] hub 3-1.2:1.0: USB hub found
    [ 5.232107] hub 3-1.2:1.0: 2 ports detected
    [ 5.245239] Linux video capture interface: v2.00
    [ 5.249575] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0369)
    [ 5.258139] input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input12
    [ 5.258213] usbcore: registered new interface driver uvcvideo
    [ 5.258215] USB Video Class driver (1.1.1)
    [ 5.267740] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.267757] input: HP WMI hotkeys as /devices/virtual/input/input11
    [ 5.299688] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.342957] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
    [ 5.372070] lis3lv02d: 8 bits 3DC sensor found
    [ 5.372127] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.385320] fbcon: inteldrmfb (fb0) is primary device
    [ 5.408760] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
    [ 5.416127] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
    [ 5.416135] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEGP.DGFX handle
    [ 5.443465] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
    [ 5.443566] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 5.443818] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 5.444803] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
    [ 5.451546] iwlwifi 0000:5c:00.0: Radio type=0x2-0x1-0x0
    [ 5.507433] usb 3-1.2.1: new low-speed USB device number 8 using xhci_hcd
    [ 5.530647] usb 3-1.2.1: New USB device found, idVendor=046d, idProduct=c045
    [ 5.530649] usb 3-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 5.530650] usb 3-1.2.1: Product: USB-PS/2 Optical Mouse
    [ 5.530651] usb 3-1.2.1: Manufacturer: Logitech
    [ 5.530803] usb 3-1.2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 5.603397] usb 3-1.2.2: new low-speed USB device number 9 using xhci_hcd
    [ 5.642247] usb 3-1.2.2: New USB device found, idVendor=03f0, idProduct=034a
    [ 5.642249] usb 3-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 5.642250] usb 3-1.2.2: Product: HP Elite USB Keyboard
    [ 5.642251] usb 3-1.2.2: Manufacturer: Chicony
    [ 5.642359] usb 3-1.2.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 5.642365] usb 3-1.2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 5.650544] hidraw: raw HID events driver (C) Jiri Kosina
    [ 5.672470] usbcore: registered new interface driver usbhid
    [ 5.672471] usbhid: USB HID core driver
    [ 5.676000] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1:1.0/input/input13
    [ 5.676142] hid-generic 0003:046D:C045.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-1.2.1/input0
    [ 5.676260] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.0/input/input14
    [ 5.676361] hid-generic 0003:03F0:034A.0002: input,hidraw1: USB HID v1.10 Keyboard [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1.2.2/input0
    [ 5.679926] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.1/input/input15
    [ 5.680033] hid-generic 0003:03F0:034A.0003: input,hidraw2: USB HID v1.10 Device [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1.2.2/input1
    [ 5.724422] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
    [ 5.731055] iwlwifi 0000:5c:00.0: Radio type=0x2-0x1-0x0
    [ 5.819472] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 5.819868] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 6.122492] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input10
    [ 6.743022] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input17
    [ 6.791046] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 6.950914] Console: switching to colour frame buffer device 240x67
    [ 6.954403] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 6.954405] i915 0000:00:02.0: registered panic notifier
    [ 6.954426] nouveau 0000:01:00.0: enabling device (0004 -> 0007)
    [ 6.954972] ACPI: Video Device [DGFX] (multi-head: yes rom: yes post: no)
    [ 6.955055] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input18
    [ 6.959873] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 6.959978] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input19
    [ 6.960085] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 6.960160] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
    [ 6.960166] ACPI: If an ACPI driver is

    @emeres: Sorry, yes, it's an HP 2013 UltraSlim Docking Station. I figured it was the only one compatible with the notebook model I provided.
    Regarding any electrical circuitry or controls... well, sure, I'm assuming there's some circuitry in there
    I'll give a whirl at using that two screen setup when I get a chance. I'm not inclined to think I need to hard-code it in a xorg conf file of some sort given that xrandr finds it just fine. I'm just perplexed by why it goes AWOL after one connect/disconnect. Now that you mention it, it could be the docking station internals, as I'm assuming most folks would be using this to plug in their computer, then completely remove it to go elsewhere, and then come back to their desk. Thus, they'd be physically disconnecting it vs. just toggling?
    That said, I'm pretty sure I can use Windows Fn+F4 to toggle laptop vs. laptop + "projector" (what Win7 calls any external display) all day with no issues, so I'd think xrandr should be able to do the same?
    Thanks for the input and links.

  • How do I use my Dell laptop with a docking station and my 27" iMac

    i heard from a friend that he is usig his imac as a "monitor" for his laptop.  so i bought a DVID dual link cable and a Mini Display Port to DVI adaptor and plugged everything in.  Nothing on my iMac yet.  what do i need to do next?  Do i need to "tell" my iMac to view my laptop docking station?

    http://support.apple.com/kb/ht3924

  • I just bought a docking station for my iPad so I could plug into a mixing board and record a live show.  I was disappointed at the time limitation for the recordings.  What is the maximum amount you can record a song into GB for the iPad?

    I purchased a docking station for my iPad so that I could record a live recording of my band directly from a mixing board this weekend using GarageBand.  Unfortunately, I was unaware of the song length limitations of the iPad version of this program.  Basically, was unable to capture more than 15 minutes of the gig.  I've read other conversations on this forum and can't really determine the maximum amount of time this application can record.  Can anyone tell me how long GarageBand for ipad can record at one single time and how to adjust the settings to achieve this?  Also, is anyone aware of any other apps than could be used to record a longer please share.  Thanks.
    CP

    I received an email reply from George, the Founder and CEO of Studiomini, he indicated to me that their app does not have any time limitations in regards to recording like GB does, you are only limited by the amount of free space on your iPad.  Fo what it's worth, I think the Alesis IO Dock is an amazing piece of equipment.  I would highly recommend purchasing the IO Dock and plugging your mixing board into the dock to capture your rehearsal.  Hopefully the feedback I received from Studiomini is accurate and I can capture my entire rehearsal at one time.  I hope this feedback helps.  One last note, apparently their will be a update soon to view Studiomni in the landscape view on the iPad instead of just the portrait view.

  • Sony Docking station will no longer play audio on Alarm after ios 7 upgrade

    I have read through many of the community postings and hate to have to start a new question when there are over 90,000 that have viewed or commented on this same type issue, but I have tried all the suggestions from community users and they work for a test, but then when you set the alarm for the next day, it flashes and no audio. Why is it that Apple is ignoring this huge customer dissatifaction and why is it that they can do this to the users? I read in one stream that they inserted a software to block any "Non-Apple" product from working with their new software. I have 3 phones in this house that have not been upgraded and they work fine. The two that I upgraded will NOT play the audio. The light will flash as if it triggered the alarm, but nothing triggers the iTunes to play. Originally Apple said it was my Sony device. Wrong! So then they said it was iTunes because they iTunes Radio was in the first/primary slot now and I had not signed up or created a Radio station. They did show me how to go into More options and change the priority to place my own music and playlist in the primary and get rid of the iTunes radio and it worked. Next day it didn't. Then I read that if you plug into an Apple peripherial and then a Non-Apple device, it will again shutdown. So I have started doing the Shutdown step every night when placing it on the docking station, never knowing if the Alarm will play/sound at 4:50 or not. Needless to say, I am NOT getting any sleep as I watch the minutes tick towards the waking hour anxiously waiting to see if the phone Will or Will not wake me. I have also seen people mention removing the "SoundCloud" What the heck is that and how do you do it?

    In my Sync vehicle, I had to "forget" the SYnc connection in the iPhone Bluetooth settings, then go into the car menu and delete the bluetooth device from the vehicle's system. Once I re-paired from scratch, it has been working fine. Give that a try. If not, try removing the connection from both sides again, then Reset Network Settings from the General Settings before re-pairing.

  • Problem with laptop and docking station

    Hello.
    We have two laptops with two docking station. Both laptops w/ docking have the same problem:
    When the computer is turned off, and its still connected to the docking station, the fan in the computer start to run really fast. The fan goes on for a good while. This is making alot of noise, which can be annoying for the person using the office. When the computer is on, the fan runs at normal speed. If you disconnect the computer from the docking station, the fan stops immediately. Any ideas?
    1. Product Name and Number
    HP ProBook 6460b
    Docking Station VB043AA
    2. Operating System installed
    Windows XP 32-bit
    3. Error message
    No error message.
    4. Any changes made to your system before the issue occurred
    No recent changes.
    Thanks in advance.
    - Betroger
    This question was solved.
    View Solution.

    It is possible the notebook is not completing the shutdown in full when docked.
    Make sure the BIOS is the most recent version.
    Here is the most recent one to try should you need it.
    Other than that, I am afraid I do not have much else for this. I did some research, but I didn't really find anything that was exactly like this. I found scenarios where the fan would run at full speed when docked, but this happened whether the notebook was booted or not. You can try your luck in the business support forums to see if they may have something that is a little more helpful.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HP Docking Station EN488AA - part number for power adapter

    Hi,
    I have a HP Compaq nx8220 notebook, with a HP Docking Station (EN488AA).
    Unfortunately I have lost the power supply for the docking station.
    I still have the power supply for the notebook itself (393955-001) but it does not plug in to the docking station. It is the correct voltage but only 90W instead of 120W, and the connector is the wrong size.
    I've been looking online for the part number for the correct replacement power supply for the dock, but became very confused when I found sites advertising the same replacement part for both the nx8220 and the EN488AA when clearly they are different because the plugs don't match. None specify the plug size so I don't know which is which.
    Can anyone help me identify the correct replacement part? Or better still, is there a plug adapter available so I can use my existing power supply for the dock too?
    Attached are two photos - the plug from the power adapter next to the inlet of the notebook (fits) and the dock (doesn't fit).
    Thanks,
    EddieD97
    This question was solved.
    View Solution.

    The pin in picture looks liek a 5mm pin and one one on docking station is a smart pin. So you would need something like the one in picture in this link.
    In the picture observe the component in left hand bottom corner.
    http://www.amazon.com/HP-power-adapter-airplane-DV574A/dp/B0006VX07I/ref=pd_sim_sbs_pc_11?ie=UTF8&re...
    I would say, take the adaptor to store and get one.
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

  • XB3000 Docking Station Video Problem

    I got an XB3000 docking station and connected my DV8000.  The USB and sound works, but cannot get the external monitor to see a signal from the XB3000.  I have used the Fn + F4 button to turn on external video, but no response seen.  I have tried the VGA and also the Component connections.
    I know the external monitor works, because I have used it directyl connected to the DV8000 VGA connector.  Any suggestions?
    The DV8000 is running Windows XP.
    HHHHHEEEEELLLLLLLPPPPPPP!!!!!
    Regards,
    Dale

    I did the same thing but just the component does not send the video to my HD tv!
    I just got a xb3000 and I hooked up the component red green and blue to my HD tv and I can not get it to wor? The touchsmart TX2Z-1000 on the other hand works great with the XB 3000.What drivers do I need? Where can I get this to work for expanding my viewing to the HD TV?
    Thanks

  • Is Docking Station ruining the battery?

    Hi,
    My old laptop was a Lenovo something which was duplicated 1 for me and the same version for my parents..
    I use to keep my AC out when 100% or my battery out when I'm at home.|
    While they were plugged in - overcharging 24/7..
    After 2 years mine was still great while theirs is now barely 10 minutes battery life.. You just unplug the AC and the PC screams low power..
    Well now I have a new laptop: HP EliteBook 2570p, with a proper docking station for it..
    I was half ear told that the docking station should smartly protect my battery life and I can count on it to not keep feeding my PC when 100% is reached..
    As it sounds believable for the size of the dock, and the fact that its almost impossible to plug out the battery without shutdown the PC first and it would be kinda silly if it wouldn't keep it.. BUT.. I don't wanna take the chance..
    A Google search wouldn't give me a proper answer and the manual doesn't speak about this..
    Could any expert please vote for a true answer if this might hurt or not
    An explanation in addition is recommended
    Thanks ahead !
    Jordan.
    This question was solved.
    View Solution.

    Hi McJordan,
    HP Notebooks won't keep charging the battery once it has reached 100%.  Gennerally speaking, if the notebook battery is at or above 95% charged when plugged in, the notebook won't charge the battery further.  Charging will only occur after the battery has dropped below 95%, and only then will it charge up to 100% and then stop.  This is true with or without the docking station.
    My own Probook, is currently sitting at 97% available (Plugged in, Not Charging) as I write this.
    There are two things to keep in mind when using a docking station with a notebook, one is that heat is the enemy of batteries and many other components in a notebook, so make sure that the notebook is not overheating by ensuring that vents are clear and clean and there is adequate air flow around the notebook.  Also if you are using the Notebook primarily in the Docking Station so it is always connected to AC Power, at least once a month, take the notebook out of the docking station and allow it to use the battery down to where you get the warning that you need to plug it in, then put it back in the docking station and allow the battery to recharge to 100%.
    I would also recommend reviewing the following two documents for additional tips on maintaining battery performance:
    Improving Battery Performance (Windows 8, 7, Vista)
    Understanding Lithium-Ion and Smart Battery Technology
    R
    Although I am an HP Employee, I am speaking for myself and not for HP.

  • How can I turn off the volume limitor on my ipod nano?  I want to play it with a docking station, it is no where near as loud as an old 4GB ipod!

    Hello, please can you tell me how to turn off the volume limiotr on my ipod nano?  I want to play it on a docking station and it just isn't as loud as I want it to be.  An old ipod is much louder.

    I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection.  All this does is slow me down since I need to go back and hit those areas again.  The big arrowhead just get's in the way.  The original lasso tool with the thin line and small active point at it's lower left was far better for me.
    I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down.  If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
    I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
    Is there any chance this option could be inlcuded in cursor preferences?  I'd give much thanks, Adobe.

  • Which HDD is compatible with HP 120W Advanced Docking station (NZ222AA)

    Please tell me which HDD is compatible with integrated SATA upgrade bay of the HP 120W Advanced Docking Station (NZ222AA).. I can't find the info neither in user's manual nor at HP site. Thanks in advance.
    This question was solved.
    View Solution.

    Hi,
    Please check this:
    While neither station can be upgraded, both feature an upgrade bay that allows you to install an extra hard drive. If you choose to install the extra drive, you will add additional gigabytes to your current laptop storage space. However, if you choose to take advantage of the extra space, a standard hard drive will not fit in the upgrade bay. HP offers a 500GB hard drive specifically designed for the upgrade bay on the 120W and 230W; you would need to order the upgrade hard drive through HP.
    Source: http://www.ehow.com/info_12229020_120w-vs-230w-doc​king-stations.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Docking station for P15-043CL

    Hi- I have recently purchased an HP Pavillion Touchsmart Laptop 15-P043CL. I want to purchase a simple docking station to allow hook up of printer, larger monitor, keyboard and mouse. I cannot find any information that directly speaks to a product for this model. What am I missing and where should I go for information? Thanks.
    This question was solved.
    View Solution.

    Mediumclueless, welcome to the forum.
    This is peer to peer help forum. The only presence that HP has on it are the Admins and the Mods. Otherwise, none of us works for HP.
    However, with that said, here is a docking station that I found in HP Store.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • I need help. I need a KVM to switch between my Mac Pro and my IBM ThinkPad (docking station).

    I need help.  I need a KVM to switch between my Mac Pro and my IBM ThinkPad (docking station). 
    Best Buy (only local option) has only a VGA / USB from iogear that scroll lock doesn't work on the Mac and low and behold I'm a d.a. and didn't notice VGA, ie:  want/need DVI. 
    I don't game on my Mac or do high-end video editing but don't want to step down the video quality too much.
    Appreciate all of the forthcoming advice. 
    Jason

    I guess I should have clarified and said "can you please share what you've used and been successful with"
    Two that I have been considering are:
    ConnectPRO
    http://www.connectpro.com/prod_kvm_usb12plusDvi.html
    IOGear
    http://www.iogear.com/solutions/kvm/?view=displayDVI
    If you do the Belkin KVM wizard, as soon as you reference a Mac, they only support VGA and I am not sure why.  http://www.belkin.com/kvm/
    Thanks for the effort.
    Jason

  • Docking station for iphone 6 with audio out

    Hey guys,
    I searched for quite some time and only found one dockingstation with an audio output, and that one was for 69$ which is too expensive in my view.
    Do you know a dockingstation where I can put in my Iphone 6 with case and which has an audio output?
    Best regards,
    Ulrich

    freedaze, What I want is a docking station that operates on AC power and/or batteries.
    I want it to have the capability of docking the iPhone5, being able to talk on speaker phone using speakers and microphone on the docking station NOT the iPhone. 
    I don't care about clock or other "bells and whistles".  I'm actually surprised that it is so hard to find these features.  All the docking stations I've found use the microphone in the iPhone.  They play music through the docking speakers but don't address the speaker phone needs.  Thanks for trying though.

  • Need docking station for Dv5t

    Greetings,
    My 2 years old dv5t 1000 display just goes south and it costs $$$ to replace it. I'm looking for a docking station that would fit this model that I can plug in. What docking station would that be? I do have all needed stuff (monitor, mouse, keyboard...). I found the quick dock one but it does not have power button on the dock.
    Your guidance is appreciated.
    John.
    This question was solved.
    View Solution.

    This is what HP oiffers for your model
    http://www.shopping.hp.com/webapp/shopping/store_access.do?template_type=product_detail&product_code...
    along with this stand that works nicely with the dock
    http://www.shopping.hp.com/webapp/shopping/store_access.do?template_type=product_detail&product_code...
    Video here
    http://h71016.www7.hp.com/html/interactive/mediadockingstation/model.html?buyNowLink=noshow&jumpid=r...

Maybe you are looking for

  • I dropped my iPhone 4S in the toilet. Now it won't shut off and the camera light stays on. What should I do?

    I dropped my iPhone 4S in the toilet. I dried it and shook out as much water as I could. I removed the SD card and put everything in a bowl of rice. It is still in there and everything appears to be working normally, but it won't shut off and the cam

  • Remote Function Call (RFC) within a BAdI in ECC to CRM

    I've a remote enabled FM in a CRM system which I want to call within a BAdI implementation of a ECC system. As a result, the CRM system is the RFC server and the ECC system is the RFC client. The FM in CRM simply gets the relevant rows of a Z table w

  • Need documents on Account Payables and Account Receivables.

    Hi All, Can any one please send me( or tell me the path where I can find the documents on AP/AR modules) the documents for Account Payables and Account Receivables. Thank you

  • MS-Word Add-on Timeout in 5 minutes

    Hello! I have a data template report that runs in about 15 minutes (I can see it through the bi publisher web interface). However, a generic error is always returned after 5 minutes. Does anyone knows where I can config the Word add-on to increase th

  • NoRouteToHostException

    I've seen a few other threads with this issue, but I'm not quite sure why I'm having the issue. I'm running the RMI server and client on the same linux box. The server starts up on port 1099 and binds the object without issue. I start the client and