View offending records in audit viewer for set-based mappings

i have mappings which is configured to load data from Oracle9i external tables into Fact tables.
i am using set-based loading with reject limit set to 0. Whenever there's an offending record from the external table, the whole mapping will fail with message 'Fatal error or maximum error exceeded'. This is exactly how i want it.
now, when i check the mapping process in audit viewer, i expect to see which record caused this process to abort. instead, i only see the same message stated above (which is not very helpful in identify source of the problem, right ?)
i believe this is due to the mapping being set-based. unfortunately i can't use row-based as i do not want ANY record loaded into the fact table even if there is 1 offending record. In row-based mode, it seems to auto-commit after a certain number of records (bfor any errorneous records are encountered). i have attempted to set the 'commit block size' to something big value (eg. 50,000) but it still seems to commit after say every 2000 records ...
any suggestions ?
thanks

Since you need set based code in order to avoid commits, it is difficult to trap record level errors - the set based procedure will run to the end or encounter an error and all you will get is a generic SQL error code and message. The commit frequency should work - I am not aware of any problems in this area. Can you give more details about this?
It might also be possible to filter correct records by using a splitter and set it in such a way that correct records get loaded into the production table, while incorrect are 'parked' into a temporary table for review. Another possibility, if you need complex data cleansing prior to loading, would be to use an intermediate staging table and then use the row based mode on it, before transferring the correct records from this staging table to the appropriate production table. This last solution will slow down your process because it introduces an additional step, but might give you the loading flexibility you need.
Regards:
Igor

Similar Messages

Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
Thanks

Hi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

Batch create multiple pdf's while using epilogue.ps for setting initial view and opening bookmarks

Hi,
I'm trying to batch create multiple pdf's from word files, and use the epilogue.ps file for setting the initial view and opening the bookmarks panel, but i keep getting no satisfying result.. i'm probably missing something fundamental.
I've read some forum posts and adobe help posts explaining this, so i'm pretty sure this would be possible?
Reference:
http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7f0f.w .html see advanced panel options
http://help.adobe.com/en_US/acrobat/using/WS58a04a822e3e50102bd615109794195ff-7f14.w.html
System: Windows 7
Acrobat: Acrobat X professional
i've searched for and found a way to overwite the epilogue.ps file and have inserted the following:
% Insert your custom PostScript here...
[ /PageMode /UseThumbs
/Page 1 /View [/Fit ]
/DOCVIEW pdfmark
After that i checked my Adobe Acrobat preferences, and in the categorie 'Convert to Pdf' i selected 'Microsoft office word' in the select area 'Converting to pdf'.
Clicked 'Edit settings' to allow creating a joboptions file (field: 'adobe pdf settings') which has the option 'Use epiloque.ps and prologue.ps' checked in the advanced section.
So now i thought i would have everyting setup to create my pdf's, however, my view isn't changed to fit, nor are there any bookmarks or in this case thumbs (i used /useThumbs) visible.
Did i miss something obvious? Is there a better way to test this? Any help would be appreciated!

i like it about that ok in how to open my site

What is the best practise for setting dirty flag of a page/view?

For a page/view, normaylly there are 2 things to do for diry data:
1. when it's clean, Save button is disabled, when it's dirty, save button is enabled.
2. when it's dirty and the window is closed, a popup says "you have unsaved data, close will lose the data".
My thought is: it must be handled at client side, because not all valuechange is auto submitted. E.g., you type the 1st letter of a string in a input box, the server side does not know it, but save button should be enabled immediately.
Is it possible to capture all valueChange events in a page or a view at client side?
I'm not sure what is the best practise for setting dirty flag? If there is better solution? Does ADF provide facility for this?

public void save(ActionEvent event){
boolean formValid = isFormValid();
   if (formValid) {
save button is enabled.
    private boolean isFormValid() {
        boolean valid = true;
        if (Check Condition 1) {
            valid = false;
           showErrorMessage1();
        if (Check Condition 2) {
            valid = false;
           showErrorMessage1();
        return valid;
    private void showErrorMessage1() {
                when it's dirty and the window is closed, a popup says "you have unsaved data, close will lose the data".

What is the Process for setting up smart view

what is the Process for setting up smart view

hehehe ..... cant stop it :)
@next level ::try this
Re: Smart View configuration
apart from this try giving point the people who post answers to u .. :) so that they will reply ur post or question which u ask now days non stop...try to minimize ur qs in single post it would be better

I need to have both Next & Back buttons displayed for viewing 20 records at

Hi Everybody,
I have a JSP page which has 2 part: The header (Selection for search with the SEARCH button) and a search result table.
Is it possible to remember the last record printed & start from the next record when I click on "Next" button? When I click on the "Next" button will it create new page? I need to have both Next & Back buttons displayed for viewing 20 records at a time.
The current JSP is using "session.removeAttribute("XXXWorkItemVector") to print out records.
I'm very new to JAVA and JSP, so please help me with my assignment and send me e-mail to [email protected]

Check this:
http://forum.java.sun.com/thread.jsp?forum=45&thread=188239
This should be of help to you.

Is it possible to view all record of child object in parent detail page.

Hi All,
Could someone please tell me how to view all records of child object in any associated parent detail page.
For example, In opportunity detail page I want to see all lead associated with particular opportunity. As per standard setting I can be able to see only five lead records in opportunity detail page. Is it possible to view all lead on the same opportunity detail page instead of clicking on "show full list"
Thanks in advance.
Manish

There is my code in labVIEW for the moment
See attachments
Dany
Dany Allard
Attachments:
Exemple code SET.JPG ‏47 KB

Record slideshow and view presenter view?

Is it possible to have he presenter view while recording a narration to the slideshow? The default view when entering menu Record Slideshow... is the full slide view, without next slide and presenter comments.
Message was edited by: petrush

Hello Steve
I may have misunderstood your question a littel and raced off and examined your site. What you are saying is that your pages in Dreamweaver look different to the web and you have some content that is from an old version of the site?
If that's the case, I'm wondering how you have set up the site in Dreamweaver? When you set up an individual site you should define a site. This helps dreamweaver manage various aspects of the site's structure. Did you do anything like that? Are you relying on an older copy of your site on your PC or did you install a completely fresh copy on your machine after the web designer's redesign?
One thing that I would try is to compare a page that does look ok with a page that does not. Identify the part of the page that doesn't look right and examine the two pages in code view to see if you can spot the difference.
Apart from that, the validation errors are a different thing. Your website is working and it looks pretty good and if that's your main concern that might be enough for you.
In the mean time, let's hope someone with a bit more clout can come up with some suggestions!
Martin

Can Data Links be established between Data sets based on View Objects?

Hi all,
In the BI Publisher Documentation it's given that Datasets based on view object queries do not support Data Links / Group Links. We found out that only way to establish relationship between view object Datasets is to create a view link and then upload it to create a Dataset.
1. Is there any other way to establish relationship between view objects Datasets in DataModel editor itself just as in the case of data sets based on (SQL queries e.t.c.)?
2. If so can View object Datasets be linked to Datasets based on other Datasources?
3. Will the Datalinks for View object Datasets be supported in any of the upcoming releases. Is there any ER logged for this case?
Any insight on the above issues will be really helpful.
Thanks

Enhance the data source with date and time and populate these fields in the user exit using the function module IB_CONVERT_FROM_TIMESTAMP .
OR
You can create Z function module IB_CONVERT_FROM_TIMESTAMP in BW side and write a routine in update rules/transfer rules to populate date and time.
hope this helps ...
Ravi

Unable to view the records in transations

We are unable to view details for Open invoices of one dealer in receivables account details and advise why we cannot view the records in Transactions or re-print the invoices

Hi Ravi,
Thanks for replying.
But here I have one Query -if the view is not active how could we see the data in RSA3?
S VR

HOw to view the records in a structure qaqee ?

hi every one ,
we can view the tble through SE16
HOw to view the records in a structure qaqee ?
Thanks in advance

Hello,
Please check the link
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/90/8d7301b1af11d194f600a0c929b3c3/content.htm
You can view the struture in SE11 t-code for its components.
Regards,
Shailesh

REQ: Add 'Fit-width' or 'Fit-visible' view mode, in which the zoom level is automatically set based on the width of the _current_ page.

Currently, the default zoom level when viewing a page of a PDF file is automatically calculated based on the width of the "widest" page of the document. This means that, if the document contains one page that is wider than the others or is in landscape orientation, then the default zoom, when viewing all the other narrower pages, is set in a way so that the page does not use the full width of the screen. This results in very poor experience, because the zoom level and the visible area of the page have to be constantly adjusted for each page. The latest update (at the time of writing) has added some extra view modes, but not the much needed 'Fit width' or 'Fit visible'.
Personally, I can find no reason valid enough to justify the lack of such a view mode. Automatically setting the zoom level based on the width of the current page so as to take advantage of the full width of the screen should be a must have feature for mobile devices, if not the default behavior. The current default behavior regarding the zoom level is pretty much useless, even on 8"/10" screens. There should be a view mode in which the full width of the screen is always used to display the document.
Examples of documents for which the Adobe Reader for Android provides a poor reading experience are:
documents which contain some of their pages in landscape orientation.
publications which, apart from the main content, also contain the full front and back cover in a single page (usually first page which is much wider than the content pages) or any other extra pages like cards or application forms (that are meant to be printed) which usually use an A4/Letter page size etc.
documents which have been cropped by external utilities or scripts so as to eliminate unneeded white margins (in some cases not all pages have the same width).
Please consider fixing the default behavior in future releases of the Reader for Android or add a 'Fit width' or 'Fit visible' view mode.
Thank you in advance.
Message was edited by: George Notaras
Improved descriptions of example documents.

To add to this, if you prefer you can separate your JavaScript from your JSF pages.
Add a folder (I named mine 'js') to your application's ViewController project's public_html folder.
Via JDeveloper, create a new JavaScript file inside your newly created folder and place your JavaScript functions inside it.
You can then 'load' the .js file using the method Shantala described, with the addition of an added 'source' property to the af:reference tag.
(This can also be a URI reference to a JavaScript file hosted on a web server)
<f:facet name="metaContainer">
<af:resource source="/js/myJsFile.js" type="javascript"/>
</f:facet>The benefits of this 'split' are cleaner JSF page source and also code-highlighting and formatting within the .js file making finding and fixing bugs in your JavaScript much easier.
It appears however, that when using <af:resource> to load scripts, once the page has been submitted even once, the JavaScript is no longer available to the page. Which isn't very useful.
A solution is to use <trh:script>.
Add xmlns:trh="http://myfaces.apache.org/trinidad/html" to your <jsp:root> tag and install the library.
then in place of the above code use:
<f:facet name="metaContainer">
<trh:script id="script1" source="/js/myJsFile.js"/>
</f:facet>Now after a page submit the JavaScript still functions.
Edited by: Matthew Carrigy on 12/08/2009 10:39

Cannot view latest records in database

I have a database with 138 records. I can only view 134. When I call for New Record I cannot see the bottom of the list. Also, I entered 10 records which are not showing. I see one posting saying something about not entering new records in the list view? Is that not the way to do it?

There should be no need to create a new DB file.
AppleWorks creates a default "Standard" layout when you start a DB file, and names it Layout 1. Unless you've renamed it or removed it, that layout is still there, and will be found at the bottom of your Layout menu. If it's the only layout (ie. if you started the DB from scratch, and haven't defined any additional layouts) then chooseing Browse (shift-command-B, or Layout > Browse) should also take you to this layout.
New layouts can be added to the database at any time. A layout controls which fields you view, and where they are placed on the screen or on the page, but has no effect on what data is included in the database itself.
To get an idea of some of the layouts that are possible, take a look at the DBs created by the Address List Assistant (make both the Personal and Business lists), and the Templates for Event Planner and Wine Collection, all found in Starting Points. These will also give you some ideas about how to combine Finds, Sorts and Layouts into automated reports, using the buttons on the Tools palette.
Regrds,
Barry

In ios 7 I can't see my old playlist of videoclip in landscape view. Anybody know how can I set it?

In ios 7 I can't see my old playlist of videoclip in landscape view. Anybody know how can I set it?

Hello everyone,
I faced this same issue, but not from updating to iOS 7.
In my case all my music playlists disappeared. In another post I found a process which got them back, but after I'd done so I noticed that my Apps list and my books list were both empty, even though I'd bought plenty of books & apps. The following trick I discovered restored both of these lists.
1. Within iTunes, select the Apps tab within the library, to show the (empty) window of all your apps.
2. Now in a finder window, open your iTunes folder. On my computer this is in my Music folder.
3. Within the iTunes folder, locate and drag the "Mobile Applications" folder into the apps window.
Presto!!
The same thing worked for finding the missing books, except that the books folder is stored one level deeper, within the iTunes Music folder, and of course I dragged it into the books window.
I don't know if it matters, but I'm still running OSX 10.6.8 because I have use some legacy OSX apps that won't run in anything more recent, but my iTunes version is 11.1.4.
I hope this helps a few people...

In table view, how to add one button for selecting page?

Hi Experts,
In the OBIEE 11.1.1.6, we have one uncommon requirement that customers want to randomly select actual page to view expected data in table view.
For example:
We make use of some columns to create one report in table view, and set 'Rows per Page' equal to '5',
if this report contains 60 rows, it will have 12 pages, so customers want to select sepcial page number to view the some data. Is it possible to implement this requirement? Maybe we should write JS code.
Note: Below table view, it has four buttons: First Row, Previous Row, Next Row and Display (500) rows in per page. So we want to add one button to select per page.
We look at orgnial codes in WebBrowse, but do not know the following codes derive from which JS file.
Could you please tell me how to find this file?
<td class="TapeDeckCell"><img class="TapeDeckImage" onclick="" onkeypress="" src="res/s_blafp/viewui/pivot/first_dis.png" title="" alt="" ><img class="TapeDeckImage" onclick="" onkeypress="" src="res/s_blafp/viewui/pivot/previous_dis.png" title="" alt="" ><img class="TapeDeckImageEna" onclick="PTRowScroll('saw_5083_b','5','5', event)" onkeypress="PTRowScroll('saw_5083_b','5','5', event)" src="res/s_blafp/viewui/pivot/next_ena.png" tabIndex="0" onmouseover="PTTD(event, 'res/s_blafp/viewui/pivot/next_ovr.png');" onmouseout="PTTDO(event)" onmousedown="PTTD(event, 'res/s_blafp/viewui/pivot/next_dwn.png');" title="Next 5 Rows" alt="Next 5 Rows" ><img class="TapeDeckImageEna" onclick="*PTRowScroll*('saw_5083_b','-1)', event)" onkeypress="PTRowScroll('saw_5083_b','-1)', event)" src="res/s_blafp/viewui/pivot/showallrows_ena.png" tabIndex="0" onmouseover="PTTD(event, 'res/s_blafp/viewui/pivot/showallrows_ovr.png');" onmouseout="PTTDO(event)" onmousedown="PTTD(event, 'res/s_blafp/viewui/pivot/showallrows_dwn.png');" title="Display maximum (500) rows per page" alt="Display maximum (500) rows per page" > <Span class="TapeDeckRecords">Rows 1 - 5</Span></td>

Hi Kobe,
Thanks for listening me.
I agree 11g have some issues unlike 10g. I've tried the same by creating a measure rcount(1) and name it as Page in RPD. I just pulled column Page in pivot table section 'Pivot Table Prompts' it is working but this may not answer your requirements.
I would suggest to use the column in Prompt and go by between operator to allow user to select the rows between.
In the report make Page as prompted.
If you are okay with this can look forward to tweak it further, like values in the prompt multiple of 5 or 10s some thing like that.
let me know updates on the same.

View offending records in audit viewer for set-based mappings

Similar Messages

Maybe you are looking for