View source doesn't work / is broken / not working in 6.1.0.1

View source in IE6 works on the guest users mypage when they first land on the site and on the login page, but any other community page once you login - it breaks.
I'm having to use the 'view partial source' in my right click context menu as offered once you install 'webdevaccess.exe' (a developer plugin unsupported but offered by Microsoft - google it) to see any source. I must admit, I just ctrl-a then 'view partial source' and I get everything but the initial <html> and <head> tags pretty much - but it's a pain.
Has anyone else seen this behavior and is there a fix?

It appears that this is indeed a problem with certain versions of IE6 while using server-side compression for all portal pages (a new feature on ALI 6.1 that is enabled by default).
The Release Notes actually contain two known issues related to this:
- Some versions of IE6 on Windows 2000 have a bug where they do not render compressed pages properly. End users should upgrade to the latest version of IE6 if compression is enabled. (Issue #54230)
- You may experience issues downloading Excel spreadsheets from Analytics reports using the Microsoft IE6 browser. (Issue #54827)
This problem is directly related to one or more of the following bugs in IE6 SP1 resolved by the KB articles listed below. Please require users to either upgrade their browsers by installing IE6 SP2 or patching with the specific downloads listed in the KB articles.
http://support.microsoft.com/kb/871205
http://www.microsoft.com/downloads/details.aspx?FamilyID=0c7055c3-0bec-4042-b6aa-3443739c66ab&DisplayLang=en
http://support.microsoft.com/?kbid=823386
The other workaround is to specifically disable compression for Excel spreadsheets in the httpcompression.xml setting file, located in %PT_HOME%/settings/portal.
I upgraded to MSIE 7 and did not encounter the problem. I also confirmed that the problem does not occur with IE6 when HTTP compression is disabled. This is now controlled by a new httpcompression.xml file.
John

Similar Messages

  • My computer's power adapter is plugged into a power source, yet the indicator light is not working and my computer is not being charged.

    My computer's power adapter is plugged into a power source, yet the indicator light is not working and my computer is not being charged.

    I have the same issue.
    The magsafe goes orange for about 20 seconds, the battery shows 0% then it goes to a black X indicating no battery installed.
    With a new battery the same happens, although it can run on battery but does not charge.
    It runs fine on mains power, the green light is always lit.
    I have tried several things so far:
    1. Cleaned the magsafe contacts on cable and macbook
    2. Reset SMC and PRAM
    3. Installed latest battery update
    4. Tried new battery
    5. Put old battery in fridge for an hour
    I work in IT and am fairly confident taking it apart, what should I try next?
    Some people recommend a new battery connector, which doesn't seem to make sense as the battery has never been removed before.  Also some people say it will need a new logic/motherboard.
    Any experts here managed to sucessfully fix one of these?

  • Disp+work.exe is not working

    Hi Gurus.........i have system ecc6.0 installed , unfortunatly the disp+work.exe is not working (gray in color) .Please help me out.
    below is the dev_dsp file details :
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      00
    sid        EC6
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    75
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        2196
    Fri Sep 19 21:26:44 2008
    kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
    length of sys_adm_ext is 572 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 2196) [dpxxdisp.c   1237]
         shared lib "dw_xml.dll" version 75 successfully loaded
         shared lib "dw_xtc.dll" version 75 successfully loaded
         shared lib "dw_stl.dll" version 75 successfully loaded
         shared lib "dw_gui.dll" version 75 successfully loaded
         shared lib "dw_mdm.dll" version 75 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Fri Sep 19 21:26:49 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5273]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >gcecc6_EC6_00                           <
    DpShMCreate: sizeof(wp_adm)          18304     (1408)
    DpShMCreate: sizeof(tm_adm)          3994272     (19872)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    DpShMCreate: sizeof(comm_adm)          528064     (1048)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1440)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 05EF0040, size: 4653368)
    DpShMCreate: allocated sys_adm at 05EF0040
    DpShMCreate: allocated wp_adm at 05EF1E40
    DpShMCreate: allocated tm_adm_list at 05EF65C0
    DpShMCreate: allocated tm_adm at 05EF65F0
    DpShMCreate: allocated wp_ca_adm at 062C5890
    DpShMCreate: allocated appc_ca_adm at 062CB650
    DpShMCreate: allocated comm_adm at 062CD590
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 0634E450
    DpShMCreate: allocated gw_adm at 0634E490
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 0634E4C0
    DpShMCreate: allocated wall_adm at 0634E4C8
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    Fri Sep 19 21:26:50 2008
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 511 blocks reserved for free list.
    ES initialized.
    Fri Sep 19 21:26:52 2008
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 2628
      argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
      argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
      argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=1044
      argv[5] = -DSAPSYSTEM=00
      argv[6] = -DSAPSYSTEMNAME=EC6
      argv[7] = -DSAPMYNAME=gcecc6_EC6_00
      argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    Fri Sep 19 21:26:55 2008
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1623]
    Fri Sep 19 21:27:06 2008
    ***LOG Q0K=> DpMsAttach, mscon ( gcecc6) [dpxxdisp.c   11586]
    Fri Sep 19 21:27:12 2008
    DpStartStopMsg: send start message (myname is >gcecc6_EC6_00                           <)
    DpStartStopMsg: start msg sent
    Fri Sep 19 21:27:20 2008
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Fri Sep 19 21:28:30 2008
    CCMS: start to initalize 3.X shared alert area (first segment).
    Fri Sep 19 21:28:33 2008
    DpJ2eeLogin: j2ee state = CONNECTED
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 75
    Release check o.K.
    Fri Sep 19 21:28:52 2008
    ERROR => W0 (pid 2636) died [dpxxdisp.c   14241]
    ERROR => W1 (pid 2644) died [dpxxdisp.c   14241]
    ERROR => W2 (pid 2652) died [dpxxdisp.c   14241]
    ERROR => W3 (pid 1632) died [dpxxdisp.c   14241]
    ERROR => W4 (pid 908) died [dpxxdisp.c   14241]
    ERROR => W5 (pid 2660) died [dpxxdisp.c   14241]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W6 (pid 2668) died [dpxxdisp.c   14241]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W7 (pid 2676) died [dpxxdisp.c   14241]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W8 (pid 2684) died [dpxxdisp.c   14241]
    ERROR => W9 (pid 640) died [dpxxdisp.c   14241]
    ERROR => W10 (pid 2692) died [dpxxdisp.c   14241]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W11 (pid 2700) died [dpxxdisp.c   14241]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W12 (pid 732) died [dpxxdisp.c   14241]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1637
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Sep 19 21:29:02 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Fri Sep 19 15:59:02 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA     2636 Ended         no      1   0             0                                                             
    1 DIA     2644 Ended         no      1   0             0                                                             
    2 DIA     2652 Ended         no      1   0             0                                                             
    3 DIA     1632 Ended         no      1   0             0                                                             
    4 DIA      908 Ended         no      1   0             0                                                             
    5 DIA     2660 Ended         no      1   0             0                                                             
    6 UPD     2668 Ended         no      1   0             0                                                             
    7 ENQ     2676 Ended         no      1   0             0                                                             
    8 BTC     2684 Ended         no      1   0             0                                                             
    9 BTC      640 Ended         no      1   0             0                                                             
    10 BTC     2692 Ended         no      1   0             0                                                             
    11 SPO     2700 Ended         no      1   0             0                                                             
    12 UP2      732 Ended         no      1   0             0                                                             
    Dispatcher Queue Statistics               Fri Sep 19 15:59:02 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    1
    2000
    1
    1
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    1
    1
    2000
    1
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          10
    wake_evt_udp_now     0
    wake events           total     6,  udp     2 ( 33%),  shm     4 ( 66%)
    since last update     total     6,  udp     2 ( 33%),  shm     4 ( 66%)
    Dump of tm_adm structure:               Fri Sep 19 15:59:02 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Fri Sep 19 15:59:02 2008
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1637
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Sep 19 21:29:07 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >gcecc6_EC6_00                           < (normal)
    DpJ2eeDisableRestart
    MsIDelService: delete service J2EE for myself
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=161,pac=1,MESG_IO)
    MsINiWrite: sent 161 bytes
    send msg (len 110+51) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_DEL_PROPERTY ok
    Send 51 bytes to MSG_SERVER
    MS_DEL_PROPERTY : asynchronous call
    send MsDelService(J2EE) to msgserver
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2628)
    killing process (2628) (SOFT_KILL)
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
    SiSelNSet: set events of sock 1508 to: ---
    NiBufISelRemove: remove hdl 4 from set0
    SiSelNRemove: removed sock 1508 (pos=2)
    SiSelNRemove: removed sock 1508
    NiSelIRemove: removed hdl 4
    DpDelSocketInfo: del info for socket 4 (type=8)
    NiICloseHandle: shutdown and close hdl 4 / sock 1508
    NiBufIClose: clear extension for hdl 4
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
    SiSelNSet: set events of sock 1536 to: ---
    NiBufISelRemove: remove hdl 3 from set0
    SiSelNRemove: removed sock 1536 (pos=3)
    SiSelNRemove: removed sock 1536
    NiSelIRemove: removed hdl 3
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 16)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 3 / sock 1536
    NiBufIClose: clear extension for hdl 3
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 2196) [dpxxdisp.c   10259]
    Good Bye .....

    The work process are dying
    ERROR => W1 (pid 2644) died [dpxxdisp.c 14241] *** ERROR => W2 (pid 2652) died [dpxxdisp.c 14241
    This lead the dispatcher to emergency shutdow:
    DISPATCHER EMERGENCY SHUTDOWN ***
    if the dispatcher cannot start the work process it force the shutdown.So, you need to check
    at the work process trace (dev_w*) files to find out the reason the they are dying.
    @deeptss     
    if you are talking about the WARNING
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0)took 5 seconds ***
    this is a normal situation if the reverse name resolution is not working.
    I have found this error when the DNS server has without the reverse zone configured.
    However this is not a problem to the dispatcher operation.
    Cheers
    Clebio

  • My camera is working but does not work on skype how do I turn the camera on for Skype

    My camer is working but does not work on skype how do I turn the camera on.

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    FIX: 
    1. You need Time Machine
    2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
    3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
    4. Go to Time machine in date that skype work fine.
    5. Change AppleCamera.plugin with file from Time Machine
    6. Restart system, Now skype need to work with camera.
    If that doesnt pass,
    Suggest looking here, much success has been found:
    http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

  • TS1718 I tried to update, did not work, unintstalled did not work.  Now when I try to install i get error message "The feature you are trying to use is on a network resource tha is unabailable.  Looking for itunes64.msi path.

    I tried to update, did not work, unintstalled did not work.  Now when I try to install i get error message "The feature you are trying to use is on a network resource tha is unabailable.  Looking for itunes64.msi path.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • NW 7.3 + iView from remote source wizard + R3 Web Dynpro ABAP, not working

    Hi,
    I think this forum is my last resort.
    I'm running NetWeaver 7.3 Enterprise Portal and also have an existing ECC6 on backend.
    Our ABAP Programmer has built some WD4A application on ECC, I'd like to made them available
    on EP as ABAP WebDynpro iView.
    From the document, I know the way to create ABAP WD iView is different since 7.3. I have to use "iView from remote source" to do it.
    On EP side, I have made an system alias (test ok) for ECC, assigned permission, provide mapping id/pwd, and test. 
    On ABAP side, all webdynpro app are activated (T-code sicf, /sap/bc/webdynpro, /sap/public/bc/webdynpro...). I can even test WAS by bringing up browser and access some sample ABAP webdynpro .
    However, I cannot success on "iView from remote source" wizard and it always show me "Nothing found. Check your search Criteria.".   Eventhough I use "*" as search criteria.
    Anyone has the similar situation ? I even doubt that it is a placeholder of a feature , not working for now. Anyone made it work on NW 7.3 ?
    More detail:
    My System Alias for ECC:   
          Application Host: myr3.mydomain.com
          SAP Client: 600
          SAP System ID:   DEV
          SAP System Number: 00
          Server Port:  <leave it blank>
          System Type: SAP_R3
          Logon Method:  UIDPW
          User Mapping Type: admin,user
          ICM Host: myr3.mydomain.com:8000
          ICM Protocol: http
          ICM URL prefix: <leave it blank>
          SAP Netweaver AS Description: <leave it blank>
    All other fileds are leave it as default value
    I also assign a group to have "read" and "user" permission to this system
    Also assign Alias to the system.
    I also create a user belong to the group, assign his system mapping an ECC user ID & PWD to it.
    I tested the System alias, it is working (both WEB AS  test, and R3 test)
    Then I try to create an iView on EP, under a PCD folder , new->iview->iview from remote source. A wizard show up. Then I can select the ECC alias just created, and provide * as application search criteria, and then select "WEB DYNPRO ABAP" as the application type. Then "GO"
    as I mentioned, it always show "Nothing Found. Check your search crieteria"
    But I'm sure the web dynpro applications are activated on R3.
    OK, that's it, please help this one. Thanks
    IF YOU DID MAKE IT WORK ON YOUR NW 7.3, PLEASE DROP A LINE HERE SO I KNOW IT IS MY OWN PROBLEM !!!
    Edited by: Wilson KU on Nov 14, 2011 10:42 AM
    Edited by: Wilson KU on Nov 14, 2011 10:46 AM

    Thanks for the reply,
    [About Backend]
    I feel confident about the backend R3 system because I can use the WAS URL to access the sample WD4A application, for example, I can bring up the wd4a application ui in my browser. It is purely browser and R3 stuff, no EP involved.
    http://soeprdev.mydomain.com:8000/sap/bc/webdynpro/bobf/demo_sales_order?sap-client=600&sap-language=ZF
    I also already activate all nodes and sub-nodes (in SICF Services) under /sap/bc/webdynpro as well as /sap/public/bc/webdynpro. (and some other nodes to make icon and include work)
    [About the system object in EP]
    I have done all kind of test on the system object (alias):
    1. In EP System Administration -> Landscape Configuration, I select the system object, click "Test Connection", It shows me a Check mark, and the detail message is SOE_DEV_600 connection
    2. Edit the System object, then click on "Connection Tests" page, I see two lines there, check both and click test, here is the result:
    SAP Web AS Connection:
    : Test Details:
    The test consists of the following steps:
    1. Check the validity of the system ID in the system object
    2. Check if the system can be retrieved
    3. Check if the system object has a valid system alias
    4. Check if an SAP system is defined in the system object
    5. Validate the following parameters: Web AS protocol; Web AS hostname
    6. Checks if the host name of the server can be resolved.
    7. Pings the Web AS Ping service (works only if the service is activated on the Web AS, and only on ABAP Web AS)
    8. Check HTTP/S connectivity to the defined back-end application
    Results
    1. The system ID is valid
    2. System retrieved successfully
    3. Retrieval of the default alias was successful
    4. The system object represents an SAP system
    5. The following parameters are valid: ICM Protocol (http) ICM Host Name (soeprdev.mydomain.com:8000)
    6. The host name (soeprdev.mydomain.com) was resolved successfully
    7. The Web AS ping service http://soeprdev.mydomain.com:8000/sap/bc/ping was pinged successfully
    8. An HTTP/S connection to http://soeprdev.mydomain.com:8000 was obtained successfully.
    Connection Test for Connectors:
    : Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the back-end application using the connector defined in this system object
    Results
    Default alias retrieved successfully
    Connection successful

  • Web Viewer embedded (custom domain) and button url not work!!! (Urgent!!!)

    Many sorry for this question - we have a Web Viewer embedded (custom domain) that have all url (button with open in browser) that not work!
    On tablet (Apple + Android) the button work great but on web viewer they do not work!
    Any ideas to solve?
    I see it: Where to place add externalLinksOpen : 'window' to FrameService?
    web viewer URL links

    Any ideas to solve?

  • Mavericks static ip doesn't on wifi does not work

    MBA 2011
    MAC OS 10.9.4
    Wifi does not work with a static IP address.
    My wifi access point does not have DHCP enabled, and there is no DHCP server on my network. The internet connection is NOT coming my wifi router.
    Every machine on the network has a static ip address and manually configured DNS and GATEWAY to my correct gateway IP. This currently is working on this machine (windows 7), my ipad 2, my xperia phone, my windows xp box, my vista box, and even a virtual pc running windows server which is on my mac.
    But the mac won't connect to the internet, or ping anything including the gateway ip address or any other machine on the ip address.
    how can i get this mac to have a static ip address without having dhcp

    Going to System Preferences -> Network, and selecting Wi-Fi in the left pane.... Questions:
    . does the Status in the right pane show connected?
    . if so, does the Network Name: reflect the name of the network you assume it should be connected to?
    . if so, clicking on the Advanced... button and choosing the TCP/IP tab:
        . is the Configure IPv4 pulldown set to Manuallyh?
        . if so, have you entered in a valid router value (to mirror what you have set on the other working devices), and an IP address which you know is not already in use on the network?
        . if so, when you Ok out of this sheet panel, if you run /Applications/Utilities/Terminal and in that window type "ifconfig" can you find a configured network device with the address information you've entered (likely either en0 or en1)?
    If all as anticipated by here:
    . what message do you see in the terminal window when you do a ping to the access point's address?
    . are you super-sure that address isn't already in use on the network (e.g on a device already on the network successfully and with your MBA's wifi turned off, try pinging the thought-to-be-free address to see if something answers back).

  • Captivate 4 SCORM not working, Exit Button Not working

    Hi All-
    I hope somebody can help me out because I am at the end of my rope with Captivate.
    I have a project that is in the final stages, I'm attempting to publish it to our LMS and it is not tracking properly, it is initializing the LMS and it is recording a "Started" status, but I can not get the completion status to work properly.
    I really don't want to include a quiz at the end so these are the settings I have used:
    LMS Standard: SCORM 1.2
    Report Status: Complete/Incomplete
    Report To LMS As: Percent
    Choose report Data: User Access Only
    Reporting Level: Interactions and Score
    I have tested every possible setting I can think of and the bloody thing will not work!
    Somebody please help me, because I do NOT want to have to start this over with Articulate!

    Hi Nathan
    In addition to the other advice, I believe that you need to have at least one scorable object in order for the reporting to work. For example, sometimes folks need a simple acknowlegement that the content has been viewed. I believe this is the case with SOX compliance. In cases like these, you insert a simple Button object the user clicks. Configure a quiz. You don't need actual question slides. You configure the button to report back the click.
    I didn't see anything about the Exit button, but the Exit button is unreliable at best. If you are clicking the Exit button and it's not working for you, take a look at the info below:
    Click here to view
    Cheers... Rick
    Helpful and Handy Links
    Begin learning Captivate 5 moments from now! $29.95
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • Having problem with my vibration some times work some times not work

    i am having issuse with my vibration ..... sometimes it works when i put it in vibration mode but sometimes vibration donot work..... and even during calls or during mesgs their is no vibration .....so plz help me out ....
    thankz....

    Hello guys,
    The problem now has changed. I just realized that if the bluetooth is not working and I put the pc to sleep when I start it again in most of the times the problem is gone, it may start working right away or even some seconds after it left the sleep mode. I tried checking it a few times and it happened 4 out of 5 times I tried. But after the Bluetooth starts working again if  I turn the computer off (shut down) and turn it back on later or even if I restart the laptop, then the problem starts happening all over again, until I put it to sleep and turn it on from spleep mode. This problem is really weird to me. 
    I am thinking that maybe there is some feature in the windows 8 that is not allowing the bluetooth to start when the computer starts from shut down or from restart, but that doesn't block the bluetooth when it is put to sleep.
    Does anybody has any idea of what is going on and how to solve it?
    Thank you all for your help so far, I appreciate it.
    Leandro

  • Camera not working and speakers not working

    My camera on my droid razr quit working it just keeps saying camera cannot initialize...has anyone else had this problem and if so what did you do about it?
    (it also doesn't work on safe mode).
    Also, my speakers are not working. I can't play music but sound works during phone calls/notification and on speaker phone.
    This all happened after I downloaded the latest update a few months ago.
    Thanks

    Liz have you Tried one of the Following,  1. A power cycle press and hold Power + Lower volume for 20 to 30 Sec. phone will shut off after the 20 to 30 sec. hold let off and let the phone re-power,  2. If that doesn't help the issue try a System Cache Clear, If the Issue after those two suggestion still is there then you may need to Factory Reset.
    But try the First suggestion first and if takes care of the issue let me know if that did work.. i'll be on for a while  b33

  • 5.1 Soundblaster not working, now LAN not working eith

    Hi,
    I'm new here, and would greatly appreciate any help anyone can give me. I've tried searching and looking through all the FAQ's I could find, but still am not able to find a solution.
    I am running windows XP and I have a Soundblaster 5. card, and it's worked perfectly until last night. I had my headphones plugged in, and decided to plug in my Creative speakers instead. When I tried to plug the speakers in, soundcard appeared to be not working. I opened up my computer and took out the sound card and put it back in again, thinking I had maybe knocked it loose. I then went to check it under Windows device manager and it was listed as 'Multimedia Audio Controller" and said I had no drivers installed. I came here to the website, typed in the model number, got the correct drivers, but when I try to install the drivers, I get an error message saying that there is not a compatible device installed. I tried removing the card and putting it back in, also tried putting it into a different slot, but to no avail.
    Now the biggest problem; after plugging my sound card in for the 4th time, my network connection stopped working. I'm connected to a LAN, and it keeps saying it's unable to renew my IP address. In device manager, it doesn't look like there's anything wrong with my network card.... could it be possible that I somehow fried the on-board network card when I was putting the sound card in?
    I'm really at a loss as to what to do here. ANY suggestions at all would be GREATLY appreciated.
    Thank you very much in advance.

    Quote from: Chrysomya on 29-April-13, 20:14:26
    Just downloaded a new driver for the realtek HD, will this resolve my problem? Current driver version is 6.0.1.6657.
    Your issue is drivers related.
    For Windows 8 use 6.0.1.6839
    http://www.msi.com/product/mb/Z77A-G43.html#/?div=Driver&os=Win8%2064

  • Iphont battery meter not working/ push notifications not working/restarting over and over again.

    A few weeks ago, I went on a vacation out of the country. I had my iphone 5 on airplane mode for a week. When I got back and turned it off of airplane mode, it started restarting over and over again right after being plugged into the charger. Eventually, it seems to get ahold of itself and stops turning on and off, but the phone battery meter freezes where ever it is at that point. If it has 100% battery, it says it has 100% battery until it dies. If it only has 1% battery, I'll leave it on the charger long enough to have 100%, but it will still say 1%. The battery life itself is not any different. According to the meter, my phone will stay on all day with 1%. Also, after being dead, my phone would turn on immediately after being plugged in (rather than waiting a few minutes to get enough charge as usual). I think this is because since my phone does not know how much battery it has, it thinks it has enough to turn on right away.
    I visited the apple store, and they told me to restore it as a new phone. When I did this, it did not work at first. But after a day, my phone battery life meter started working normally again, and it stopped doing the turn on/turn off continuously thing. BUT imessage no longer worked. It said "waiting for activation" for two weeks. Also, push notifications no longer worked. Every time I openned an app, it would notify my that i could not have push notifications and to connect to itunes. Certain apps wouldnt work at all (snap chat, lulu). They would just give the alert about push notifications over and over again.
    I wanted imessage back, so I restored my phone as new once again. This time, imessage, push notification, snapchat, ect. started working again. But, it has gone back to not knowing how much battery life it has and restarting over and over again after being turned on from a dead state. WHAT DO I DO?! I don't want to have either of these problems. It's kind of like my phone has a virus.
    note: the first time i turned it on after coming back from vacation, it said "no sim card" for a few minutes.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    Regards
    TD 

  • Password not working, reset and not working again ...

    Hi I have had nothing but problems today I think my account has been hacked.  Couldn't log in to Skype on PC or iPad kept saying my password was incorrect, though same password I have always had.  I changed my password by having Skype send me a new one to my email.  I activated it and created new password and all good.  IN the middle of a call it shut down suddenly and when I tried to log on again, it said it didn't recognise the password I only just created that had worked already.  Kept trying and still nothing. So I went to create a THIRD password and now skype is saying my email address doesn't exist.  I have had this account for years and they only just sent me a new password to that email address so it certainly does exist.  Left for a few hours and now tried again and it says i have tried too many times today.  I have actually tried to create  new account to be able to use skype.  Can anyone explain what is happening? I am currently scanning for viruses but i really want to be able to use my old account with all my contacts on it rather than start from scratch!  My mother in law is having the same problem with her account so I wonder if it's a virus??  At the same time I have started receiving a bunch of emails from 'skype' in Chinese so I assume this is connected somehow?  Please any ideas on how to fix this?! 

    Have received numerous of the following:  also my account isn't working, passwords not working, can't access anything.  I think it's been hacked.  It is now not even recognising my email address.  Please advise how to fix.  Please note I did not follow any links in any of these emails that have been sent to me.
    本邮件自动发送，请勿回复。
    您好，sarahodonnell79：Skype管理器分配的Skype点数
    管理员Brian Leahy（来自Skype管理器Recognize polite beauty）为您分配了一些Skype点数。 您可以立即开始使用该功能。
    以下是为您分配的内容：
    Skype点数：EUR 8.00
    您的Skype用户名为sarahodonnell79 日期：2012-10-3
    查看您的Skype帐户
    Skype点数的用途：
    拨打世界各地的座机和手机 通过Skype WiFi使用WiFi热点 激活Skype To Go号码 启用呼叫转移
    如果需要协助或想要申请其它Skype功能，请联系您的管理员，他们的详细资料位于成员列表。 或者，如果需要任何其它帮助，请查看Skype的支持页面。
    我们希望您尽情享受使用Skype点数的乐趣。           
    谢谢！ Skype同仁

  • WRT54G - Stopped working. Will not work again.

    I got this router about 4 months ago to share my desktop's internet connection with my mom's new laptop. After 3 or 4 days of frustration, I got it to work. It then worked fine for a few months until one week ago, it decided to mess up. So for the past week I've been struggling to get the router working again, but with no luck. My internet: Bellsouth DSL. My modem: Westell Wirespeed Dual Connect. I begin each of my now 15-20 sessions in frustration by completely disconnecting the router from the PC and modem, disconnecting the modem from the PC, and starting the setup program from the install disc that came with the router. Everything works fine at first. The router takes me to set up my PPoE connection. I input the correct info and then it always hits this snag - during the part where it's checking the internet connection, it reaches 100% 3 or 4 times before telling me no internet connection can be detected. I should turn off the modem, then turn it on again. That doesn't change anything. My problem, during the first few days I had the router, was that I had to go into the modem settings and change it to "Bridged Ethernet Mode". That doesn't work anymore. The router still does not want to recognize my net connection, even with Bridged Ethernet enabled on the router. Also, every time I restart the modem to comply with the setup program's advice, the modem reverts to PPoE mode. Either way, no connection can be found. That makes perfect sense considering I can just disconnect the router and connect flawlessly to the internet with my modem in less than 10 seconds. What could be making the router act like that? Without the router set up, I can't go into the router settings. I can't see any settings in my modem settings that seems to be able to help. I'm frustrated, please help.

    1)connect the computer to the router's port 1.
    2)access the router using http://192.168.1.1 .. the default login password is admin
    3)change the router's local ip add to 192.168.2.1 .. save the settings .. do a power cycle
    4)connect the modem to the router's internet port
    5)access the router using http://192.168.2.1 ... click on the status tab and check the internet ip add
    6)if there is an ip add , try to go online
    7)if you cannot go online or there is no ip add , on the router web ui , change the internet connection type to PPPoE .. enter the username and password information given by the ISP . save the settings
    8)click on status...make sure the login status is connected and there is an ip add
    9)if any problem in setting up the PPPoE conenction , configure the modem in bridge mode ..

Maybe you are looking for