Viewing 3D Lights Issues

Hi I'm using the latest version of CS5 and when I press "Show all" in the 3D section, nothing happens at all.
I am on Win7 and have an ATI 4760 I noticed that people have had problems with the latest version of  Catlayst Control and I'm not sure if this will be another problem due to it.
Regards,
         Denty

When I press R it does the not avaliable sign and says that open gl is not enabled
Adobe Photoshop Version: 12.0.3 (12.0.3x20101211 [20101211.r.1222 2010/12/11:02:00:00 cutoff; r branch]) x32
Operating System: Windows 7 32-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 2600 MHz
Built-in memory: 3583 MB
Free memory: 2187 MB
Memory available to Photoshop: 1639 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Crash File: Not Detected.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Radeon HD 4800 Series       
Display: 1
Display Bounds:=  top: 0, left: 0, bottom: 1024, right: 1280
Video Card Number: 1
Video Card: ATI Radeon HD 4800 Series       
Driver Version: 8.831.2.0
Driver Date: 20110308000000.000000-000
Video Card Driver: aticfx32.dll,aticfx32.dll,aticfx32.dll,atiumdag.dll,atidxx32.dll,atiumdva.cap
Video Mode: 1280 x 1024 x 4294967296 colors
Video Card Caption: ATI Radeon HD 4800 Series       
Video Card Memory: 512 MB
Serial number: 92628842397252979849
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5\
Temporary file path: C:\Users\James\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
  C:\, 465.7G, 327.6G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5\Plug-ins\
Additional Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5\Plug-ins\

Similar Messages

  • Help Viewer is an issue with InDesign CS6

    Would anyone happen to know if the Help Viewer is an issue with InDesign CS6? Even with a manual install the Help feature launches without issues the first time and won’t launch after the second time. This is the message we are receiving on Windows 7:
    “Help viewer is not installed check your internet connection and reinstall InDesign”

    Anup R. wrote:
    Can you try the option mentioned in 2nd para of the reply, if you are connected to internet?
    You can try changing the preference "General Settings" > "Display Local Help content only" to "No" so that application launches the online help content.
    -Anup.
    YES! It does help.Thank you very much. I changed the setting yesterday but side tracked before I see the online content works. So in general scope, yes it takes me to the online help center, which gives me options for more "community" answers. So yes, thank you for making me look further.
    However, I really was a fan of the local help that looked like and felt like the user manuals produced by Adobe, not just blogs, and more message boards. So I am still partially dismayed that I take the time to download and update the local help files, but can't use them. And wish Adobe would just fix the problem, so I can have immediate access to user manuals without having to surf all over for answers. Perhaps this is a novice thought, but I liked reading it in manual formats provided by the amnufacture of the software.
    Thanks again though for the help and it will just have to get used to this method. UNLESS you can tell me good news of something else I am missing?

  • I purchased a one year subscription to Rolling Stone magazine . I got two issues and now it will not allow me to view the current issue, I have to pay again. Can someone help me, how do I get my purchase. I have the automatic download turned on.

    I purchased a one year subscription to Rolling Stone magazine . I got two issues and now it will not allow me to view the current issue, I have to pay again. Can someone help me, how do I get my purchase ? I have the automatic download turned on.

    Try contacting apple

  • Nokia C5 flash light issue

    Hi, First i set the flash light off to capture images in daylight.It worked fine.I exited the camera then and reopened it.Now i tried to take a picture using camera and flash light was on now. Why the camera is not able to remember its previous flash light mode....

    I love my C5 .
    My phone does not have flash light issue .
    I brought it from US directly to my home town .
    And this was only possible with the help of http://www.viaddress.com) The Global Leader in Package Forwarding.
    This company is very cheap and relieble too .
    I really recommend you all for shopping from US
    Thanks
    Attachments:
    donkey.jpg ‏33 KB

  • Camera flash light issue

    I have purchased Xperia Z1 in Feburary 2014 and having flash light issue in Photos. If i click without flash then image comes fine but if i click with flash then at the bottom of Image(flash side) there is a extra light comes which is flash light. And that flash look more ugly if i click in low light enviroment. I used all of settings (Auto, Daylight, Night Scene). In all setting if i click in low light there is extra flash comes in Image.
    Note : My Xperia is full update using sony update.

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    I suggest that you have your phone examined by a service center. Please contact your local Xperia support team for more information:
    http://www.sonymobile.com/global-en/support/contact-us/
    What are your thoughts about this forum? Let us know by doing this short survey.

  • How to view all the issues in the same page in OTM

    HI,
    I have created 20 issues in OTM but I am able to see only 10 issues at a time.So how can I view all the issues in the same page.

    Hi,
    Login to OTM then you can see "tools"in the top most right corner click on that and select options.In the options popup window select "Tree preference" change the number of nodes.
    Regards
    Rajesh

  • [SOLVED] Source Game Lighting Issue

    When playing older source games such as Team Fortress 2 and HL2 I am able to see the glow of light fixtures through walls. I don't have this issue in newer source games like Left 4 Dead 2. I am using wine 1.3.2 and have all games running with directx 9. I tried using dx8 and I had the same lighting issue. I google'd around but couldn't find anything really relevant to my issue, I might have missed something. Any help would be greatly appreciated.
    edit: I have a gtx260 and I am using the latest nvidia drivers.
    Last edited by insectica (2010-09-07 21:54:32)

    Usually it´s a good idea to first check wine´s appdb:
    http://appdb.winehq.org/objectManager.p … 0&sAllBugs
    Video
    On modern GPUs Half-Life 2 should be able to run in all dx-levels (70, 80, 81, 90). However there are might be some visual problems on higher dx-levels.
    Whatever "some visual problems" means
    The page also suggests:
    To fix number of problems with "water in the sky" and lighting add this to the registry:
    [HKEY_CURRENT_USER\Software\Wine\Direct3D]
    "OffscreenRenderingMode"="fbo"
    And well..if nothing helps I would capture a small video showing the problem and report a bug to wine. Playing around with your vid drivers and wine in other versions might help.
    That is the good and most basic thing people often seem to forget. Open Source devs are often very open to bugs you report and their projects can only get better if people report bugs.
    Last edited by Darksoul71 (2010-09-07 21:02:59)

  • HANA Analytical View Display Data Issue

    SAP Experts,
    Need your kind help for the below issue,
    I've created an analytical view from a DSO Active Table in HANA Studio. Through IDT (Information Design Tool), when I tried to view the contents of this DSO table (AYPURDA0100) by connecting to HANA, I see the following error which is mentioned below,
    Error:
    Error while refreshing the data provider.
    Cause of Error:
    SAP AGSDBODBC DLLHDB General error;7 feature not supported: cannot execute select * on olap cube: zthd/AYPURDA0100: line 1 col 26 (at pos
    Note: The AYPURDA0100 table contents are displayed in HANA Studio. However when a view was created with NO join conditions for the same table with few selected fields including measures, the display data is not working.
    Your views are greatly appreciated. Thank You in advance

    Check out the comments from Marc and Lars in the thread below.
    http://forums.sdn.sap.com/thread.jspa?forumID=491&threadID=2138937

  • Magsafe Power Light Issue

    Hello everyone,
    Just recently (as in yesterday) my light on the Magsafe power charger for my Macbook decided to switch back and forth from the green light to the orange charging light all day. It is still doing it as I type and I am really getting frustrated with this issue. The charge on the battery will be about 80% and will take hours upon hours to reach charged. When it finally does reach charged, the light stays green on the charger, however when I unplugged it, my Macbook reported that about 700 hours of battery life is left, and did not update as time went on. In addition, my Macbook no longer displays the message telling me that my computer is running off reserve battery power and simply dies on me without notice when the battery gets low as opposed to going to sleep. This is another issue I would like to get solved and may possibly be related to the light problem on the magsafe charger.
    I did notice that there is a tear in the wire (near the plug part of the charger) and it is fairly large (as in able to see inside to the metal wiring, of which a few are broken). However, my battery also has 424 cycles on it as well. So I am not sure if either may be causing this issue.
    I have reset the PRAM a few times as well as resetting the SMC with no luck in fixing the issue, and would like to know if anyone can help.
    I would really like to avoid service, or buying new parts because I have a limited budget and am hours away from the nearest Apple Service Center.
    If anyone has any advice or suggestions, it would be much appreciated.
    Thank you in advance everyone!

    Hi,
    First, be sure the battery has nothing that would cause the battery to have poor contact witg the terminal in the computer. Make sure the battery is fully seated and the retaining screw is engaged.
    Try calibrating the battery. It sounds like the controller in the battery pack is confused. Turn the MacBook on and use the MacBook until the battery gets low enough to cause the MacBook to shut off. At this point, the battery is empty and controller chip also knows the battery is empty.
    Next, charge up the battery completely. It is OK to use the computer while it is charging, but don't disconnect the charger before the battery is fully charged.
    If calibrating doesn't help, see if you can borrow a friend's charger.
    Bill

  • Crystal Report viewing and Printing Issue

    Hi Experts
                    I use crystal Reports for PO,AR Invoice,Delivery and many other documents.It takes more than 5 mins to view layout from crystal report and print sequence printing takes more than 10mins.Please Help me to rectify this issue..
    Regards
    Naresh Kumar

    Hi Naresh,
    What is your SAP version and Patch Level ?
    I believe in new version this issue has been addressed by SAP. Also note SAP B1 8.81 PL 07 has some issues in crystal Report, it asks for SQL user id and password, SAP is aware of this issue. So if you plan upgrade to latest PL then ensure that Crystal report issue is resolved, otherwise you will be in trouble.
    BR
    Samir Gandhi

  • C#/SharePoint -View State related issue while exporting data to excel

    We have web application based on SharePoint. We have a list view to display data based on Search Criteria. We have total of around 16000 data. When we try to export all data to excel it gives an error. The cause of the issue is:
    View State is used to save the state of page i.e. the previous state. When the export to excel link is clicked, the data present in the grid is actually saved in view state so that the overhead of again generating
    the data(as per the selection criteria) can be avoided. Now, this View state has a limitation of storage of these records. When we put in some selection criteria, the no. of records is less hence no problem in actually storing the view state. But when there
    is no selection criteria, 16306 records are too much to be stored in view state. Hence the error occurs.
    We tried to solve this issue by creating a compressor class and overriding two methods:
     LoadPageStateFromPersistenceMedium
    SavePageStateToPersistenceMedium
    This has resolved the issue with Export to Excel. However, there is now some issue in the paging of the list view. The list view has a column with hyperlink which opens related data in a form. While we click on the link in 2<sup>nd</sup>
    page of the list view, it displays data for the link in the 1<sup>st</sup> page at same row.
    Please suggest how to resolve this issue or any workaround for this

    We have web application based on SharePoint. We have a list view to display data based on Search Criteria. We have total of around 16000 data. When we try to export all data to excel it gives an error. The cause of the issue is:
    View State is used to save the state of page i.e. the previous state. When the export to excel link is clicked, the data present in the grid is actually saved in view state so that the overhead of again generating
    the data(as per the selection criteria) can be avoided. Now, this View state has a limitation of storage of these records. When we put in some selection criteria, the no. of records is less hence no problem in actually storing the view state. But when there
    is no selection criteria, 16306 records are too much to be stored in view state. Hence the error occurs.
    We tried to solve this issue by creating a compressor class and overriding two methods:
     LoadPageStateFromPersistenceMedium
    SavePageStateToPersistenceMedium
    This has resolved the issue with Export to Excel. However, there is now some issue in the paging of the list view. The list view has a column with hyperlink which opens related data in a form. While we click on the link in 2<sup>nd</sup>
    page of the list view, it displays data for the link in the 1<sup>st</sup> page at same row.
    Please suggest how to resolve this issue or any workaround for this

  • View Link Editor Issue - empty query clause if based on association

    JDeveloper 10.1.2
    Setup:
    - entities A and B
    - a 1 to * association from entity A to entity B (A_B_association)
    - a view of A based on entity A (AView)
    - a view of B based on entity B (BView)
    - BView has an expert mode query
    Create a view link from table A to table B:
    - choose the A_B_association under AView for the source attribute
    - choose the A_B_association under BView for the destination attribute
    - click add
    - click next
    issue: the query clause is empty
    - click next:
    info dialog pops up;
    title = "Business Components"
    message = "Restoring the default where clause."
    Note, however, that creating a view link based on the attributes works. That is, if I choose the primary key attribute under AView for the source attribute, and the corresponding foreign key attribute under BView for the destination attribute, then the wizard generates the expected query clause.
    If I create a new project and recreate the entities, the views, and the association, then I can successfully create a view link based on the association. The foreignKey value on the association end was different in the new association XML file.  I modifed the old XML file so that it used the same foreignKey element, but that did not seem to work.
    I am guessing that this is some sort of user error on my part or that we have otherwise managed to squat up our XML files.
    Any tips, hints, or ideas appreciated.
    Thanks,
    Steve

    The problem is in AView.
    We had modified the AView at one point, then reverted it to a default view of entity A. Here, "a default view" means that we undid our custom changes (apparently not thoroughly enough); that is, we did not delete it and create a default view from scratch using the contextual menu on the A entity.
    The bottom line is that the AView attributes were not being mapped to the entity -- they were showing up as calculated attributes.
    We created a "New Default View Object..." from the contextual menu of entity A, then manually corrected the AView.xml file to solve the problem.

  • View Selector - Switch issue between Graph and Table Data

    Hi:
    We have created the report with both Table view and Chart View. Both of them has been added to the View Selector and added to the Dashboard. While performing the testing we found that sometimes the Switch between the views are not happening. Meaning when we try to switch from Chart View to Table View, the View changes in the drop down but the original Graph to table will not switch. In order to make that happen we need to try 3 or 4 times across the drop downs from Table to Chart and then chart to table.
    Did any one face the similar issue. Any suggestions or insights on this.
    Please help.
    Thanks & Regards
    Sunil Kumar T.S.

    hey there RAM,
    here are a few tips...
    1. what is the table field with the right value? and is this table field in the *itm extractor?
    2. can you include this field into the extractor?
    3. could it be a calculated value?
    hope this helps.

  • SSRS web based report viewer control rendering issues - text getting clipped chopped off

    Hi,
    I am using web based SSRS report viewer control to display SSRS reports in browsers like Chrome, FF, IE, Safari etc. My issue is some text is getting chopped off (clipped) in all cells of some reports. I investigated on my end by analyzing generated HTML
    and I could see a problem in the HTML that report viewer control is generating. But I am afraid to apply any HTML or Javascript hacks at the moment considering we have hundreds of reports.
    You can see in above image how text got chopped off. The problem in HTML (given below) is the text has been wrapped in a div tag with a fixed height. If I remove the height and also padding on parent TD, the text appears properly.
    <td class="A23dfe7c5f99245f2a0db522a22a6035597c" style="HEIGHT:5.00mm;background-color:#d3d3d3;"><div style="HEIGHT:3.24mm;overflow:hidden;"><table lang="en-US" cellspacing="0"
    cellpadding="0" border="0" class="Pd9776e5f7eaf4df696265b8b49d1da39_1_r17"><tbody><tr><td class="A23dfe7c5f99245f2a0db522a22a6035597" style="word-wrap:break-word;white-space:pre-wrap;">MyType11</td></tr></tbody></table></div></td>
    Please let me know if you have faced a similar scenario before.
    Here is link to stackoverflow thread -
    Stackoverflow thread
    Regards
    Murtaza

    Hi Murtaza,
    According to your description, when you display the report with Report Viewer control, the data within the text is cutoff.
    Based on my research, the issue could cause by that Arial Unicode MS font hasn’t been installed on the server where Reporting Services run. Besides, when we use ReportViewer control to render report, we’d  better set
    AsyncRendering="true" in the Report Viewer control. Also please run the IE with compatibility mode. For more information, please refer to similar threads below:
    Data in column getting cut-off in report viewer control
    SSRS Rendering Issues
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • Report Viewer icon rendering issue with web controls

    Hi,
    I have a sample application in ASP.NET 2.0 in which if I have a report viewer control in an aspx page and when I try to browse the page the report renders properly with all icons image also. But in the same application I am having a web user control that is having the report viewer control and I have added this control on another page. Now if I try to browse this page the report is rendered properly but the icon images are not displayed rather as 'X' is displayed indicating images are missing.
    Thanks
    Kajal

    It sounds like the CrystalReportViewer control does not "agree" with the .NET control you are embedding it in. Can you be more specific with the exact steps to duplicate this issue? It would be helpful to know what controls you are using.
    Viewing the source code will be helpful in your troubleshooting. You'll also want to review your IIS logs to see what error are popping up there. It could be that the gifs are being searched for in another location. You may need to make a copy of the crystalreportviewerxx directory in a new location.
    Regards,
    David

Maybe you are looking for