Viewing audio files that are syncing

How do I view a list of the audio files that are syncing to my ipod during the sync process. Until I downloaded 7 I could see the files that were syncing and they had a mark next to them but I have not figured out how to view the files in my music list that are marked for syncing.
Thx

How do I view a list of the audio files that are syncing to my ipod during the sync process. Until I downloaded 7 I could see the files that were syncing and they had a mark next to them but I have not figured out how to view the files in my music list that are marked for syncing.
Thx

Similar Messages

  • Where are the files that are sync'ed from iPhones stored in Windows?

    A newbee question but important to me!
    During the second sync operation after acquiring an iPhone 4, the program stopped / crashed (?), and the phone switched itself off. I guess that there was a reset at the same time, because all photographs, movies and music in the phone disappeared.
    Calendars and apps seem to be unaffected.
    Hopefully it will be possible to restore the missing files from the PC. But where are they?

    Welcome to the discussions,
    Your music and movies should still be part of the iTunes library on your computer. See if your movies are listed in "movies" in the left window in iTunes.
    Photos you took with the phone are part of the last backup, if you did not sync after that. If you did, the data got overwritten.
    See what else is inside the backup and how to restore from it here: http://support.apple.com/kb/HT1766

  • What app do I need to install on my iphone so that audio files that have been shared with me will play?

    I have google drive on my phone but I can not play any audio files that are shared with me because it keeps telling me that it is not supported without the right app.

    Perform this Google search: ".dwg files on mac." The results should provide answers for you.

  • On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up?

    On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up? The tracks are from voice recordings that were downloaded from an extrernal drive and weren't necessarily tagged as spoken audio. Do I need to go back into itunes and relabel these tracks so they will show up on my ipad2?
    Thanks in advance for your help!

    With the iPad connected to the computer, while iTunes is running, click on the iPad name on the left side under devices. Click on the Movies tab and look for Movie Rentals. You want to "Move" the films to the iPad.

  • HT1351 Whenever I try and eject my iPod from iTunes after it is done syncing a box pops us that says "The iPods' 'Owners iPod' cannot be ejected because it contains files that are in use by another application".

    Whenever I try and eject my iPod from iTunes after it is done syncing a box pops us that says "The iPods' 'Owners iPod' cannot be ejected because it contains files that are in use by another application".iTunes is the only thing open on my computer so I don't understand what this could mean.  If anybody could help me out that would be great. Thanks

    Hello, cgtyoder. 
    Thank you for visiting Apple Support Communities. 
    Try resetting the iPod and power cycling your Mac to see if this message disappears.  If the issue persists you may need to restore the device to factory settings.  The article below will walk you through both these steps.
    How to reset iPod
    http://support.apple.com/kb/ht1320
    Cheers,
    Jason H.

  • I am Having iPOD Classic 80GB.On Sync. a message tells that it is not able toread the ipod contents -restore to factory settings-on restoring it tells that it can not be restored as it has files that are used by other applications. Pl advice

    I am having iPOD classic 80GB . I Have the 10.5Latest Version of iTunes installed. When I go for Sync.It tells me to restore to factory settings as it is unable to read the contents. On restoring it tells : unable to restore as this has files that are in use by another application. I have no idea what to do now. Pl advise. Thanks

    Try disabling any and all A/V or security software you are running on your system and see if that helps.
    B-rock

  • I am not able to Sync. My iPOD classic 80Gb. It tells that as iTunes can not read the contents-restore to factory settings- after restoring – it tells that it can not be restore bcause there are files that are used by other application. I am having Widows

    I am not able to Sync. My iPOD classic 80Gb. It tells that as iTunes can not read the contents-restore to factory settings- after restoring – it tells that it can not be restored bcause there are files that are used by other application. My iPOD appears in My Computer in drive H as a mass storage generick volume

    Try disabilng the Enable Disk Use option from under the iPod's Summary tab, applying the changes, and seeing if that helps.
    Otherwise, temporarily disabling any antivirus, security, firewall, or file indexing software that may be running on your system and then try restoring your iPod again.
    B-rock

  • Files that used to be visible are now hidden in Mavericks. How can I change the setting to view the same files as before? I do not need the hidden files that are typically invisible.

    Files that used to be visible are now hidden in Mavericks 10.9.1. How can I change the setting to view the same files as before? I do not need the hidden files that are typically invisible.
    I am having trouble locating such files as PDF's INDD, AI etc. When I view all hidden files and try to open it in the program..it looks like it is really not on the drive. Has anyone come across a solution?

    You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type:  ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.   
    Repair User Permissions

  • Trying to eject my ipod from my PC after syncing b4 disconnecting but a msg pops up saying "ipod cannot be ejected becuz it contains files that are in use by another application

    Trying to eject my ipod nano from my PC after syncing complete b4 disconnecting but a message keeps popping up "ipod cannot be ejected becuz it contains files that are in use by another application ?

    Hi, arthur260, I presume you've solved this by now, but I came across this post looking for the same solution for my ipod nano. In my case the problem was that I had the box checked to "Enable disk use" under the options for the ipod. It immediately solved the problem when I unchecked this.

  • When I try to eject my ipod after sync I get the following message:"The iPod cannot be restored because it contains files that are in use by another application.". I tried to restore but it doesn't work and I get the same message

    When I try to eject my ipod after sync I get the following message:The iPod cannot be restored because it contains files that are in use by another application.". I tried to restore but it doesn't work and I get the same message

    Go to your computer's System Tray and try ejecting.  If you can't eject, there is an application that is trying to access your iPod.
    Go to http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx and download ProcessExplorer.
    Go to http://support.microsoft.com/kb/555665 and follow the instructions under Resolution.
    Note that this is a good, general process any time you can't access any file.
    In my case an update to RealPlayer installed a program called RecordingManager that was accessing my iPod.

  • Do I need to have iWork on my iOS device in order to view files that are stored in iCloud Drive?

    I was hoping that iCloud Drive would allow us to view files on our iPhones or iPads without having Pages, Numbers, or even Word, Excel, etc... When I did the update to iOS 8 I found that there was no separate app for iCloud Drive, thus no way to simply view files stored on iCloud Drive.  I understand not being able to edit the files without having iWork or Office programs installed.  Does anyone know if we will have this capability or if I'm just missing it?  If this option isn't going to be provided to us, I'll be forced to continue to use Dropbox to view files on iOS devices (even though we can't view iWork files on iOS Dropbox anymore...)

    To elaborate on my question, this is what I was expecting.  The iPad and iPhone in this picture looks as though there is a place on iOS where you can see all of the files that are located in iCloud Drive.  You can also see that each file has an associated tag (the colored dots) which we were able to start using on Mavericks.  I understand that the Mac you see in the picture has iCloud Drive as a native(ish) drive on the computer which will be available with Yosemite, but I don't understand where on the iPhone/iPad these shots were taken from, assuming it's iOS 8.0
    On the up side, I just received my iPhone 6 today to find that iPhone6 and 6+ users are given Pages, Numbers, and Keynote free for their iOS devices.

  • How can clients view video file that I upload to my Creative Cloud area?

    How can clients view video files that I upload to my Creative Cloud area?  Is there a special password that they have to use to gain access?
    Thanks for any guidance.
    Dave

    As a video professional, i agree and am VERY disappointed with this policy.  I attended CC presentations at various conventions, film festivals and meetups for a year-and-a-half before I made the leap to CC, and no one EVER mentioned a restriction to transferring video files.
    Whether it's to save storage space or not, that's how it APPEARS to the end user.  Anybody who knows ANYthing about how video pirates commit their crime (which it most-certainly is), knows that there are plenty of FREE, untraceable (or nearly-anonymous) resources to carry it out.  The need for anyone to pay $30 or more per-month to do it with an acct that has their info attached to it is ludicrous!  If anything it's CONTRIBUTING to piracy to encourage creatives to transfer their material to collaborative parties using a less-secure, more heavily-trafficked third-party service than the one they're paying for exclusive use for.
    Adobe's policy makers need to review this restriction and remove it or provide ANOTHER reason why it exists because this one doesn't fly.  And if it continues, make sure a disclaimer gets inserted in CC pitch presentations because likely half of the attendees are working with video.

  • HT1351 Whether or not I sync items on iTunes to my ipod, I cannot eject the ipod because a message keeps coming up and saying that my ipod cannot be ejected because it contains files that are being used by another application. How do I fix this?

    I just got an ipod classic 7th generation a couple days ago and I'm having a heck of a time with it. My latest problem is that with media on iTunes, I cannot eject the ipod because it says that it cannot be ejected because it contains files that are being used by another application. What application is this, and what do I do about it?

    Hi newipoduser,
    Here are some possible solutions:
    Do you use musicmatch jukebox on your computer? If you do, you have to go into task manager on windows and end process mim.exe. It interferes with disconnecting ext devices
    Empty your "trash/recycle bin."
    If that doesn't work, try quitting all your programs, especially music-type programs, basically things that look for mp3's etc.
    if that doesn't work, "log off" then "log on" and that should refresh/purge your OS system.
    Finally, you can restart your computer.
    Hope one of these helps!
    Cheers,
    GB

  • I have Prem. Elements 12.  I am trying to add audio media.  I know where the audio files are located (using GET INFO while in iTunes), and when I try to add certain audio files, some are accepted and some are not.  In one case, when I opened a particular

    I have Prem. Elements 12.  I am trying to add audio media.  I know where the audio files are located (using GET INFO while in iTunes), and when I try to add certain audio files, some are accepted and some are not.  In one case, when I opened a particular folder, the song was not listed, even tho' the song is there when using Windows Explorer.  This happens with mp3 and mp4 and just wav files.  Some audio are accepted, most are not.  I get that codec is not installed error message, too.

    Perhaps it would be helpful for you to view the page source code of this page
    http://www.alanwork.com/
    As you can see, the submenu code links are immediately below the top level code, and are
    wrapped in their own  <UL> </UL> tag pairs.
    Hope that helps

  • I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

    I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

    Hi
    In iMovie'11 (version 9.0.x)
    on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
    down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
    Here one can select the Pre-Set speeds
    Are you familiar with getting 'inspector' to run?
    No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
    Yours Bengt W

Maybe you are looking for