Viewing Catalog Contents

Hi All,
Has anyone any ideas on how we can allow Cart/PO approvers (who are not able to shop) access to view the SRM Internal Catalog content when they do not have access to the shop transaction?
We have just gone live with SAP version 5.5 and are not using MDM.
Any suggestions would be welcome, but please don't ask why they want to do this as they just do
Thanks in advance
Allen Brooks
BPO
SAP CCC Team
Sunderland City Council.

Hi,
Check up with your SAP BASIS(or) SAP Authorisation Team whether it is possible to control the same through separate ROLES assigned to the user.
Normally for the person who is creating Shopping cart only will have the access .
G.Ganesh Kumar

Similar Messages

  • Unable to view catalog content - fetching children does not complete

    I'm stuck with a HANA system where I'm not able to see the content of the catalog folder in the navigator in hana studio. Neither am I able to see system status, apart from the hover over the system connection where it says "all services running".
    I can explore the security section but nothing else.
    ANy hints or pointers?
    (AWS hosted instance, less than a week old, started and stopped a few times to keep costs down. Logged on with user SYSTEM).
    Changed the password for both the db user SYSTEM and for the hdbadm user.
    Regards,
    Espen Leknes

    This is a known issue and happily there is a workaround.
    Read the post by Wolfgang Auer here http://scn.sap.com/message/14304262#14304262
    He lists a series of SQL statements to execute at the end of his post. Before you execute them, read also Wolfgang's post here: http://scn.sap.com/message/14315505#14315505 where he specifies a point where you have to wait bit before executing the final SQL statement.
    I've experienced the "catalog hanging" error many times, and I used to have to restore from backup like you did.  But it often comes back, so it is worth knowing the workaround.

  • Error message when viewing Catalog.

    Hi Gurus,
    When trying to view catalog when processing contract, an error message would prompt - You must log on correctly before you can use this application. This was working the day before, and only today the error message is being generated.
    Has anyone experienced this same error message? How do I get more information on this, so that I know where to look into?
    On a side note, it would be helpful to note that also yesterday, I attempted to Publish the Catalog in SRM -- but this didn't finish -- it hanged. Log reads -
    06/13/2007 09:04:39 (UTC+8): Catalog publication was started 
      Updating catalog /CCM/MASTER_CATALOG 
      Publication will only be local 
      Maximum package size (catalog items): 10000 
      06/13/2007 09:04:39 (UTC+8): >>> Start: Publication of catalog model 
      06/13/2007 09:04:43 (UTC+8): Data types published; 0 updated/created; 0 deleted 
      06/13/2007 09:04:43 (UTC+8): Characteristics published; 0 updated/created; 0 deleted 
      06/13/2007 09:04:43 (UTC+8): Schemas published; 1 updated/created; 0 deleted 
      06/13/2007 09:04:43 (UTC+8): Categories published; 0 updated/created; 0 deleted 
      06/13/2007 09:04:43 (UTC+8): >>> End: Publication of catalog model 
      06/13/2007 09:04:43 (UTC+8): >>> Start: Publication of catalog content 
      06/13/2007 09:04:43 (UTC+8) ************ Start Applications Log for Package 0001 ******************* 
      06/13/2007 09:04:43 (UTC+8): Package 0001 is being transferred to Update Manager 
      06/13/2007 09:04:43 (UTC+8): Package 0001 is being updated locally 
      06/13/2007 09:04:44 (UTC+8): catalog locked for update 
      06/13/2007 09:04:44 (UTC+8): catalog header data updated 
      06/13/2007 09:04:55 (UTC+8): catalog model data updated 
      06/13/2007 09:04:55 (UTC+8) ************* End Applications Log for Package 0001 ******************** 
      06/13/2007 09:04:55 (UTC+8): Package Nr. 0001 was sent 
      06/13/2007 09:04:58 (UTC+8): Items published; 303 updated/created; 0 deleted 
      06/13/2007 09:04:58 (UTC+8) ************ Start Applications Log for Package 0002 ******************* 
      06/13/2007 09:04:58 (UTC+8): Package 0002 is being transferred to Update Manager 
      06/13/2007 09:04:58 (UTC+8): Package 0002 is being updated locally 
      06/13/2007 09:05:09 (UTC+8): catalog items updated; 303 updated/created; 0 deleted 
      06/13/2007 09:05:12 (UTC+8) ************* End Applications Log for Package 0002 ******************** 
      06/13/2007 09:05:12 (UTC+8): Package Nr. 0002 was sent 
      06/13/2007 09:05:26 (UTC+8) ************ Start Applications Log for Package 0003 ******************* 
      06/13/2007 09:05:26 (UTC+8): Package 0003 is being transferred to Update Manager 
      06/13/2007 09:05:26 (UTC+8): Package 0003 is being updated locally 
      06/13/2007 09:05:34 (UTC+8): catalog views updated; 1 updated/created; 0 deleted 
      06/13/2007 09:05:34 (UTC+8) ************* End Applications Log for Package 0003 ******************** 
      06/13/2007 09:05:34 (UTC+8): Package Nr. 0003 was sent 
      06/13/2007 09:05:44 (UTC+8) ************ Start Applications Log for Package 0004 ******************* 
      06/13/2007 09:05:44 (UTC+8): Package 0004 is being transferred to Update Manager 
      06/13/2007 09:05:44 (UTC+8): Package 0004 is being updated locally 
      06/13/2007 09:05:46 (UTC+8): catalog views updated; 1 updated/created; 0 deleted 
      06/13/2007 09:05:46 (UTC+8) ************* End Applications Log for Package 0004 ******************** 
      06/13/2007 09:05:46 (UTC+8): Package Nr. 0004 was sent 
      06/13/2007 09:05:47 (UTC+8) ************ Start Applications Log for Package 0005 ******************* 
      06/13/2007 09:05:47 (UTC+8): Package 0005 is being transferred to Update Manager 
      06/13/2007 09:05:47 (UTC+8): Package 0005 is being updated locally 
      06/13/2007 09:05:51 (UTC+8): catalog views updated; 1 updated/created; 0 deleted 
      06/13/2007 09:05:51 (UTC+8) ************* End Applications Log for Package 0005 ******************** 
      06/13/2007 09:05:51 (UTC+8): Package Nr. 0005 was sent 
      06/13/2007 09:06:01 (UTC+8) ************ Start Applications Log for Package 0006 ******************* 
      06/13/2007 09:06:01 (UTC+8): Package 0006 is being transferred to Update Manager 
      06/13/2007 09:06:01 (UTC+8): Package 0006 is being updated locally 
      06/13/2007 09:06:03 (UTC+8): catalog views updated; 1 updated/created; 0 deleted 
      06/13/2007 09:06:03 (UTC+8) ************* End Applications Log for Package 0006 ******************** 
      06/13/2007 09:06:03 (UTC+8): Package Nr. 0006 was sent 
      06/13/2007 09:06:03 (UTC+8): Views published; 4 updated/created; 0 deleted 
      06/13/2007 09:06:03 (UTC+8): >>> End: Publication of catalog content 
    It stopped til here -- and I dunno if it could be afecting the catalog. Can anyone give input on this? I will reward points

    Hi,
       The solution for your problem is explained  in the foll thread.Have a look at the steps:
    Re: Catalog Search not working
    BR,
    Disha.
    Pls reward points for useful answers.

  • Not able to view the content in Microsoft help viewer (MS VS 2012)

    Hello Team,
    I'm Rahul from Daimler-Chrysler, Bangalore location. I’m the IT Engineer for Daimler-Chrysler.
    We tried many settings in IE but still not able to resolved. So i need more expert help. 
    My customer having one issue- 
    # User is not able to view the content in Microsoft help viewer (MS VS 2012), below is the error: Its opening in HTML Format.
    So please help me. Contact no- +91-9972004298. and personal id:- [email protected]/[email protected]
    I call you to Microsoft customer care they advice me to ASK Question. Please help me, I'm waiting for your reply.
    Thanks,
    Rahul B. Patil.
    +919972004298.

    Hi Sri,
    it looks that your HANA instance has been created before we enabled the web-based development workbench. Some privileges are missing, we can't migration those existing instances.
    Nevertheless you can ignore the error above. You can see all the content inside your instance "smstest1".
    If you want to get rid of the cosmetic issue. You might delete this instance and create a new one.
    Best regards
    Xu

  • Authorization issue to view cube contents

    Hi Gurus,
      I am getting Authorization issue to view cube contents in Production server, When I execute the cube it is showing me the following statement.
    "You do not have sufficient authorization for the infoprovider ZMMG_C05".
    Please provide me a possible solution for this.
    Thanks,
    Jackie.

    Hi,
    Two things to be checked with respect to authorization for this one.
    1) Functional Roles: Check whether Info cube is present in the functional roles that are assigned to you.
                                  If not you need to get the functional role in which the Infocube is assigned.
    2) Data Access Roles: Check in the data access roles assigned to you, whether you have the access
                                      to the selection that you are using to see the data in the info cube. Else, request
                                      BASIS team to assign the appropriate data access roles to you.
    Hope this helps.
    Regards,
    Bharat

  • Unable to view the contents in NQS Config file

    Hi Forum,
    After I successfully install the OBI EE 10.1.3 Application, I am unable to view the contents in NQS Config file. It is opening in Notepad with error showing as "The filename, directory name or volume label syntax is incorrect."
    So please guide me in resolving this issue.
    Regards
    Cool j

    You probably have restricted access to the file. Check if the drive is ntfs. If the os user is in administrator group, you can give permissions in file properties.

  • Is it possible to view the content of multiple lists(located in multiple webs) in one ListViewWebpart? And how can I filter a multivalue column?

    Is it possible to view the content of multiple lists, that are located in different webs as well, in just one ListViewWebpart? Could I maybe change the query programmatically so that it get's the content this way?
    I know that I could use the Content Query Webpart instead - actually I have been using that so far, but the problem is, that it brings no standard Sharepoint functionality for lists with it... I had to write the xsl style sheet, there are no dynamic filters
    that the user could set, there are no default list operations the user could use.
    The ListViewWepart has all of these, but it only shows the content of one list...
    And my second problem:
    One column can contain multiple values (like a column that contains multiple users or user groups that are related to one entry). I can filter every other column with the standard filters, but not the column with multiple values in it. Is it possible to
    activate that or maybe add this feature programmatically?

    You can fetch data from multiple lists in ListViewWebpart, this can be possible through Content Query web part or Custom Web Part using visual studio but in that case you can not get the standard SharePoint funcationality for list (which is available in
    ListViewWebparts).
    No OOB filter available for multi-choice column, you also have to go with custom solution to achieve this.
    Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

  • I have the latest version of free Quicktime, Itunes  and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.

    i have the latest version of free Quicktime, Itunes  and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.

    Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
    ... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

  • As of yesterday afternoon, I can no longer view the content of email on my iPhone. When I open the email, there's no content.

    As of yesterday afternoon, I can no longer view the content of email on my iPhone. I can view it on my iPad and my iMac. When I open the email, there's no content. Contact and subject appear, but zero content. It seems to be chronically "checking for email" at the bottom of the screen, whereas the email downloading indicator at the top has finished. This issue is across all three of my email accounts.

    if you're using Yahoo email, this is a common problem with iPhone and Yahoo

  • Issue with Smart View Help Contents using v11.1.2.0.01

    Hi there,
    I just installed v11.1.2.0.01 (Build 003) of the Smart View add-in on a MS Windows XP SP2 PC with MS Office 2003 SP3.
    Unfortunately, the Help Contents in MS Excel does not seem to work as whenever I select Smart View > Help > Contents, nothing gets displayed. Selecting Smart View > Help > Technical Support and Smart View > Help > EPM Documentation takes me to various links on the www.oracle.com site.
    I uninstalled then re-installed this specific version a few times but to no avail. I even checked the contents of each subdirectory where Smart View has been installed but could not find any Help files whatsoever.
    1. Has anyone ever encountered this issue?
    2. If yes, what do I need to do to resolve this issue and get the Smart View Help to be displayed?
    Thanks in advance,
    JBM

    Well, reading the documentation about knowing where to find the documentation would have actually helped. At the bottom of page 10 of the Smart View ReadMe document, the following is mentioned under the "Documentation Updates" section:
    "For Smart View online help to be available, the Shared Connections URL on the Advanced page of the Options dialog box must contain an EPM Workspace URL."
    This question is now answered.
    JBM

  • How can I view the contents of a free trial for adobe fireworks cs6 on mac

    how can I view the contents of a free trial for adobe fireworks cs6 on mac.
    My friend told me to find the application in finder then hit control and click it and then it should give you the option to click
    "view package contents"
    This was not the case
    please help thank you

    When posting in Apple Communties/Forums/Message Boards.......It would help us to know which iMac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
    CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
    CLICKY CLICK-----> Help us to help you on these forums

  • TCODE-to view the content of setuo table

    Hi Experts,
    Can anyone let me know is there any TCODE where we can view the content of setup table
    Regards,
    Meera

    Hi,
    Normally the tables r in the form of clustertables if u want to see there is no special tcode for this  go to the SE11 or SE16 give the table name as below
    if the datasource is 2lis_11_vahdr after filling setup tables for this datasource9for this application component)MC11va0hdrsetupin se11 in table u give that bold one and execute it u can see the setup tables.
    Thanks & regrds
    sathish
    Edited by: sathish kakumudi on Jan 30, 2009 2:22 PM
    Edited by: sathish kakumudi on Jan 30, 2009 2:24 PM

  • Can't view uPerform content with Flash Plugin 10.1.102.64

    My company uses uPerform a product that we use to create flash based simulations and WBTs. After downloading the most recent version of the flash player, I have not been able to view existing content published on a server. When users accesss Flash content it displays a blank white or black screen. I have seen an article which seems to describe my issue entirely, but it was posted as an Adobe Captivate issue. There is a workaround for the product, but it directed towards users have problems with Captivate.
    Here is a link to one of our published simulations:
    https://rwdp.ebsp.msu.edu/ucontent/e2f402a4126b4d8e9c10210472f564ec_en-US/sim/flash//index .htm#
    Similar known Captivate issue:
    http://blogs.adobe.com/captivate/2010/11/cp5-content-with-text-animations-not-working-with -latest-flash-player-version.html
    The problem seems to be present in IE 7, IE 8, and Firefox. I attempted to follow uninstall directions and was directed to most recent version of the plugin. This issue is effecting thousands of our users.

    You can find information on this issue at the ANCILE Product Support Center -- products.ancile.com. We recently posted a few blog articles on this issue and options to address.

  • I'm having difficulties viewing some content of certain websites using any browser on Maverick!!

    Hey,
    I can't view some content of certain websites on any browser. I'm running on 10.9.2 and I have tried this on Chrome, Firefox, Opera and Safari and nothing seem to work. For instance, I can't view the videos on 11secondclub.com or login to digitaltutors.com
    Any thoughts what the problem might be?
    Thanks!

    XML parsing error may have to do with a corrupt cache or profile.
    *[http://mzl.la/1xKrH3y]
    Please make sure that this does not happen in a new profile to make sure that this is not the issue: [[Use the Profile Manager to create and remove Firefox profiles]]

  • SRM - Catalog Content Management

    Hi SRM Masters
    Can any one could send me the config documentaion for SRM Catalog Content Management document and functionality(other than SRM260 and SRM270 both I have).
    and also SUS config documents and functionality.
    Regards
    Rajesh

    Hi,
    Check these links....
    http://www.sap.com/usa/solutions/businesssuite/srm/pdf/BWP_SID_Catalog_Content_Mgmt.pdf
    http://www.jhu.edu/hopkinsone/documents/SRMCatalogandContentManager_000.pdf
    Reward points if useful....
    Regards
    AK

Maybe you are looking for

  • When-new-record-instance

    Hi All ! I have a form, where in *Trigger:when new form instance* enter_query; *Block level Trigger :when-new-record-instance* :empaply.employeeid:=:global.employeeid; select employee_id,firstname into :empaply.employeeid,:empaply.employeename from p

  • Should it take 7+ hours to export my 2 minute video?

    I converted footage from my flip cam to apple ProRes 422 in Quicktime 7. I did some quick edits, threw a few fllters on there & made a minute & a half video. Iopted for the simple share feature to export the movie for youtube. It's been transcoding f

  • Allocation of resources fractionally to projects in project online.

    Hi, How to assign resources fractionally in Project Online without using Microsoft Project Professional? For eg. if I want to allocate a resource's x% or x hrs in a task, then how do I do it in project online. Note: If this functionality is not avail

  • Error when starting Captivate 6 on Mac

    This keeps coming up when I try to start the program. I have uninstalled and reinstalled captivate 6 twice. Any suggestions?

  • ORA 01422 and V$SESSION & AUDSID

    Hi all, We have a client sent us the below Oralce error : ORA-01422 SELECT DISTINCT SID INTO My_sid FROM V$SESSION WHERE AUDSID=USERENV('SESSIONID'); could you please help, does v$session contain many session having the same audsid ? Is this error re