Visio SCOM Add-In - Distributed Application Export not Contacting Management Server

I have installed the Visio 2010 SCOM Add-In to my copy of Visio 2013 (since there is no 2013 Add-in and there seemed to be enough articles that it *should* work). I can connect to my Management server from a blank diagram and add objects without issue, although
I seem to have to reconnect every time I start a new drawing. Not that the configuration is gone, I just can't do anything until I go into Configure and click OK. The real issue though is that when I go into SCOM and export a Distributed Application as a Visio
Diagram and then open it in Visio, it is not connecting to the Management server and none of the objects seem to have any SCOM data associated with them. I have tried manually linking the objects in the drawing to SCOM objects but this does not work, even
though I can see the SCOM objects.
For reference, I am doing all of this work on my Win7 machine with Visio 2013. I have the SCOM console installed on my machine. SCOM is SCOM2012 R2 running on a 2012 server.
Thanks for any suggestions.

Hi,
Would you please install this add-in on another new brand Windows and check the result.
I hope these can help you:
SCOM 2012 - Visio Integration Add-In Not Loading
http://kevingreeneitblog.blogspot.dk/2012/08/scom-2012-visio-integration-add-in-not.html
Install the Visio 2010 Add-in
http://technet.microsoft.com/en-us/library/hh920815.aspx
Regards,
Yan Li
Regards, Yan Li

Similar Messages

  • Dynamic deployed web application doesnt' work in managed server

    Hi:
    Can anyone tell me what I have done wrong:
    1. I create a new web application DYNAMICALLY (i.e. copy directory to
    applications directory)
    2. I assigned one of the managed server as target for the new
    application
    3. Restart managed server
    4. Try to access the new application in managed server, and get error
    message:
    10.4.5 404 Not Found
    The server has not found anything matching the Request-URI. No indication is
    given of whether the condition is temporary or permanent.
    If the server does not wish to make this information available to the
    client, the status code 403 (Forbidden) can be used instead. The 410 (Gone)
    status code SHOULD be used if the server knows, through some internally
    configurable mechanism, that an old resource is permanently unavailable and
    has no forwarding address.
    Any ideas?
    Thanks in advance.
    Alex

    See my answer to your last post. The short answer is that the HttpClusterServlet is
              likely to be the problem and not the cluster. You can try one of the web server plugins
              or a hardware load balancer as a temporary workaround. You should file a case with
              support too...
              Manu Kar wrote:
              > Hai All!
              >
              > Here is my problem ! I started Admin Server and Managed server in a same machine.
              > I deployed HttpClusterServlet in web.xml of Managed server. When i started servers
              > they start fine and says Clustering started.... But when i tried to Access index.jsp
              > that is in Managed Server default web application ..Nothing happens. It neither
              > throws exception nor shows the desired page.. Seems to be Browser hang and server
              > hang. At this stage i am unable to access Admin console also.(I can access before
              > i tried index.jsp of managed server).. It seems to be Hang Allover..
              >
              > Pls suggest me how to come out of this hanging...
              >
              > Rgds
              > Manohar
              

  • I can not startup Managed server via admin server

    Admin server ip:172.16.219.25
    Admin server name:nstwssadm1.webex.com
    Managed server ip:172.16.219.189
    Managed server name:nstwss001.webex.com.
    I can start Managed server in comand line like 'startManagedWebLogic.sh nstwss001-s1 t3s://nstwssadm1.webex.com:9002'
    But, I can not startup Managed server in console, it appears following log:
    =========
    <Jun 29, 2006 8:56:16 AM EDT> <Info> <NodeManager@*.*:5555> <Starting Server nst1::nstwss001-s1 ...>
    <Jun 29, 2006 8:56:16 AM EDT> <Info> <NodeManager@*.*:5555> <BaseProcessControl: saving process id of WebLogic Managed server 'nstwss001-s1', pid: 11072>
    <Jun 29, 2006 8:56:19 AM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA WebLogic JRockit(TM) 1.4.2_08 JVM R24.5.0-61 Version ari-49095-20050826-1856-linux-ia32 from BEA Systems, Inc.>
    <Jun 29, 2006 8:56:19 AM EDT> <Info> <Management> <BEA-141140> <The managed server is going to contact the admin server at https://172.16.219.25:9002 to check if there exists a running admin server at this URL.>
    <Jun 29, 2006 8:56:20 AM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/bea/weblogic81/server/lib/DemoTrust.jks.>
    <Jun 29, 2006 8:56:20 AM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/bea/jrockit81sp5_142_08/jre/lib/security/cacerts.>
    <Jun 29, 2006 8:56:21 AM EDT> <Info> <Configuration Management> <BEA-150017> <This server is being started as a dependent managed server.>
    <Jun 29, 2006 8:56:21 AM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 8.1 SP5 Mon Sep 19 23:06:54 PDT 2005 641358
    WebLogic XMLX Module 8.1 SP5 Mon Sep 19 23:06:54 PDT 2005 641358 >
    <Jun 29, 2006 8:56:21 AM EDT> <Info> <Configuration Management> <BEA-150015> <Connecting to the administration server https://172.16.219.25:9002 to retrieve the initial configuration.>
    <Jun 29, 2006 8:56:22 AM EDT> <Notice> <Log Management> <BEA-170019> <The server log file /opt/bea/weblogic81/common/nodemanager/nstwss001-s1/nstwss001-s1.log is opened. All server side log events will be written to this file.>
    <Jun 29, 2006 8:56:23 AM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/bea/weblogic81/server/lib/DemoTrust.jks.>
    <Jun 29, 2006 8:56:23 AM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/bea/jrockit81sp5_142_08/jre/lib/security/cacerts.>
    <Jun 29, 2006 8:56:26 AM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/bea/weblogic81/server/lib/DemoTrust.jks.>
    <Jun 29, 2006 8:56:26 AM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/bea/jrockit81sp5_142_08/jre/lib/security/cacerts.>
    <Jun 29, 2006 8:56:28 AM EDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Jun 29, 2006 8:56:28 AM EDT> <Notice> <Security> <BEA-090170> <Loading the private key stored under the alias DemoIdentity from the jks keystore file /opt/bea/weblogic81/server/lib/DemoIdentity.jks.>
    The WebLogic Server did not start up properly.
    Exception raised: 'weblogic.management.configuration.ConfigurationException: Due to faulty SSL configuration, this server is unable to establish a connection to the node manager.'
    Reason: weblogic.management.configuration.ConfigurationException: Due to faulty SSL configuration, this server is unable to establish a connection to the node manager.
    <Jun 29, 2006 8:56:28 AM EDT> <Notice> <Security> <BEA-090171> <Loading the identity certificate stored under the alias DemoIdentity from the jks keystore file /opt/bea/weblogic81/server/lib/DemoIdentity.jks.>
    <Jun 29, 2006 8:56:28 AM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/bea/weblogic81/server/lib/DemoTrust.jks.>
    <Jun 29, 2006 8:56:28 AM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/bea/jrockit81sp5_142_08/jre/lib/security/cacerts.>
    <Jun 29, 2006 8:56:28 AM EDT> <Warning> <NodeManager> <BEA-300038> <The node manager is unable to monitor this server. Could not create an SSL connection to the node manager. Reason : localhost>
    <Jun 29, 2006 8:56:28 AM EDT> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: weblogic.management.configuration.ConfigurationException: Due to faulty SSL configuration, this server is unable to establish a connection to the node manager.>
    ===============================
    Who can help me on it?
    Thanks.

    your error says:
    'his server is unable to establish a connection to the <b>node manager</b>'
    check that your node manager is running when you try to start de manage server.

  • "Reader could not contact the server to complete the request" error

    While trying to tranfer a document into pdf format I have suddenly received the above error - "Reader could not contact the server to complete the request"  I have already transfered three or four documents today, but now am suddenly receiving this error.  I have tried rebooting my server to check for issues on my end but it is fine.  Any suggestions?  Thanks.

    Hi there,
    Here are some suggestions you can try:
    a) Ensure your internet connection is available and try again.
    b) If you are using an older version of Reader, try installing the latest (Reader XI) and try again.
    c) Log into the web app (createpdf.acrobat.com) and click on Convert to PDF on the right hand pane and try converting to PDF from there.
    Laura.

  • Reader could not contact the server to complete the request........how to fix this?

    New to Adobe..........trying to convert a .doc file to .pdf............but all I get is, "Reader could not contact the server to complete the request."
    Ideas?

    I believe I figured how.to do it.
    Sent from my iPhone

  • Could not contact Primary Server

    Got this message when updating Sophos Home Edition for Mac:
    Could not contact Primary Server. URL Error: 3 July 2015
    Mac OS X 10.10.4
    Sophos Home Edition 9.2.4
    As I'm in Australia and this is first report for 3rd July, am thinking this may be a cloud error with Sophos infrastructure.
    If not, there's something else amiss... have cleared cache and restarted.
     

    Hope this helps. Richards-iMac:~ richarddahl$ ping dci.sophosupd.com
    PING sophos-1.hs.llnwd.net (95.140.224.160): 56 data bytes
    64 bytes from 95.140.224.160: icmp_seq=0 ttl=58 time=114.191 ms
    64 bytes from 95.140.224.160: icmp_seq=1 ttl=58 time=96.908 ms
    64 bytes from 95.140.224.160: icmp_seq=2 ttl=58 time=152.376 ms
    64 bytes from 95.140.224.160: icmp_seq=3 ttl=58 time=90.373 ms
    64 bytes from 95.140.224.160: icmp_seq=4 ttl=58 time=68.236 ms
    64 bytes from 95.140.224.160: icmp_seq=5 ttl=58 time=67.888 ms
    64 bytes from 95.140.224.160: icmp_seq=6 ttl=58 time=83.124 ms Richards-iMac:~ richarddahl$ ping dc1.sophosupd.com
    ping: cannot resolve dc1.sophosupd.com: Unknown host Richards-iMac:~ richarddahl$ ping dc2.sophosupd.com
    ping: cannot resolve dc2.sophosupd.com: Unknown host Richards-iMac:~ richarddahl$ dig dig dci.sophosupd.com cname +short
    sophos-1.hs.llnwd.net.

  • Crystal Report Export not working in Server 2008

    Hi
    Please Help..
    I am Using Crystal report Report 9 with VB 6 and SQL Server 2008. All my Client PC s (Windows XP SP3) are able to export the reports in any format but with my SERVER - (Windows Server 2008 (32 Bit)) it isn't possible. The Button is very much enabled
    but when I click on it, Nothing happens.. Please Help... 

    Hi,
    I would like to suggest you try to run SAP Crystal Reports under Compatibility Mode to check if it works.
    Run in compatibility mode with administrative privilege
    ================================
    1. Right-click the .exe file of the SAP Crystal Reports program and choose
    Properties.
    2. Switch to the
    Compatibility tab.
    3. Please check the
    Run this program in compatibility mode for and choose
    Windows XP (Service Pack 3).
    4. Check the
    Run this program as an administrator box under the
    Privilege Level.
    5. Click
    Apply, click OK.
    Note: If the option is unavailable when running this program as an administrator, it means that either the application is blocked from always
    running elevated, the application does not require administrative credentials to run, or you are not logged into the computer as an administrator.
    If it does not work, it is high recommended to contact your local SAP Support Engineers for further assistance. They are more familiar with their own
    product.
    Regards,
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Application is not running if server runs foreground

    We have recently migrated all the applications from 6.1 to 7.0.1. Even in 7.0.1 the applications were working fine. Everything was fine after the move. But since yesterday we are not able to make the applications up, when the server is running in batch mode. But if it is running in console(Fore ground), we are able to make the applications up. Our Essbase server in HP Unix. It is very strange. We have tried many times.Have anybody encountered such situation?Thanks in advance.Swapan

    We have recently migrated all the applications from 6.1 to 7.0.1. Even in 7.0.1 the applications were working fine. Everything was fine after the move. But since yesterday we are not able to make the applications up, when the server is running in batch mode. But if it is running in console(Fore ground), we are able to make the applications up. Our Essbase server in HP Unix. It is very strange. We have tried many times.Have anybody encountered such situation?Thanks in advance.Swapan

  • Server Hangs when I tried to Access web Application that deployed in Managed Server

              Hai All!
              Here is my problem ! I started Admin Server and Managed server in a same machine.
              I deployed HttpClusterServlet in web.xml of Managed server. When i started servers
              they start fine and says Clustering started.... But when i tried to Access index.jsp
              that is in Managed Server default web application ..Nothing happens. It neither
              throws exception nor shows the desired page.. Seems to be Browser hang and server
              hang. At this stage i am unable to access Admin console also.(I can access before
              i tried index.jsp of managed server).. It seems to be Hang Allover..
              Pls suggest me how to come out of this hanging...
              Rgds
              Manohar
              

    See my answer to your last post. The short answer is that the HttpClusterServlet is
              likely to be the problem and not the cluster. You can try one of the web server plugins
              or a hardware load balancer as a temporary workaround. You should file a case with
              support too...
              Manu Kar wrote:
              > Hai All!
              >
              > Here is my problem ! I started Admin Server and Managed server in a same machine.
              > I deployed HttpClusterServlet in web.xml of Managed server. When i started servers
              > they start fine and says Clustering started.... But when i tried to Access index.jsp
              > that is in Managed Server default web application ..Nothing happens. It neither
              > throws exception nor shows the desired page.. Seems to be Browser hang and server
              > hang. At this stage i am unable to access Admin console also.(I can access before
              > i tried index.jsp of managed server).. It seems to be Hang Allover..
              >
              > Pls suggest me how to come out of this hanging...
              >
              > Rgds
              > Manohar
              

  • Nodemanager does not restart managed server after Linux OS reboot

    Running Linux 2.6.18, Sun JDK 1.6.0_14, and WebLogic 10.3, we have a correctly functioning nodemanager watching a single managed server. If I kill -9 the managed server, the nodemanager fires up a new one immediately. If, however, we reboot the box, the nodemanager will start cleanly and will not start the managed server. It appears to believe the node should remain down and reports its status as UNKNOWN.
    I've seen where this is a known problem on Windows boxes, easily gotten around by supplying the -Xrs parameter to the startup parms for the managed server. (Section 5 of the general nodemanager config doc.) I don't see, however, where there's an equally clean solution for Linux.
    Things I've tried:
    + When I set the server to DEBUG, it shows zero sign of receiving a shutdown signal. It's dumping loads of cluster messages, etc, into the log and then suddenly the log just ends so it's dying via kill -9. If the nodemanager is still running at that time, it might try to restart the managed server and log it somewhere as permanently failed.
    + The nodemanager only logs to INFO level, and logs no evidence of deciding to leave the node down. (DEBUG is an invalid LogLevel, so that's all I've got.)
    + A restart signal sent from our AdminServer (on another Linux box) successfully starts the managed node through the nodemanager. Nothing unusual occurs or is logged.
    Things I'm curious about:
    + Is there some way to see in what state the nodemanager believes the managed server to be?
    + Is there some value in some doc somewhere that might say the server should not be restarted?
    + Is there not a log of NodeManager client actions? I don't see anything in domain.log or AdminServer.log except when the NM is down.
    Thanks,
    Kevin
    ListenPort=5556
    ListenBacklog=50
    SecureListener=true
    AuthenticationEnabled=true
    NativeVersionEnabled=false
    CrashRecoveryEnabled=true
    JavaHome=/appl/java/jre
    StartScriptEnabled=false
    StopScriptEnabled=false
    StartScriptName=startWebLogic.sh
    StopScriptName=
    LogFile=/appl/bea/wlserver_10.3/common/nodemanager/logs/nodemanager.log
    LogLevel=INFO
    LogLimit=0
    LogCount=1

    can you set NativeVersionEnabled to true. We have faced this in windows which was fixed by changing this property. Some notes from that issue:
    Faced this interesting issue in Windows 2008 environment. Managed Servers were started by node manager and it was expected that on a system restart after a crash, the node manager will restore the state of the managed servers to the state it was before the crash. Node Manger was configured to run as a windows service. Hence it started after the server restart. But the individual managed servers were not getting started. Interestingly, for the managed servers started by the node manager there were no <Managed_Server_Name>.lck file in the <Server>/data/NodeManger folder.
    To fix this always set the following properties in the nodemanager.properties on the node maager home directory.
    CrashRecoveryEnabled=true /* This by default is set to false. This needs to be turned for auto restart after crash to work */
    NativeVersionEnabled=true /* This is by default set to true and it should be set as such. If you turn this off on platforms for which weblogic provide native JNI libraries ( e.g. as in Windows 2008) then this wont create the .lck file and hence node manager wont restart the managed server after the crash.
    Note: As per official documentation .lck files are required for weblogic node managers to do auto restart after system crash
    From Official documentation:
    After the system is restarted, Node Manager checks each managed domain specified in the nodemanager.domains file to determine if there are any server instances that were not cleanly shutdown. This is determined by the presence of any lock files which are created by Node Manager when a WebLogic Server process is created. This lock file contains the process identifier for WebLogic Server startup script. If the lock file exists, but the process ID is not running, Node Manager will attempt to automatically restart the server.
    If the process is running, Node Manager performs an additional check to access the management servlet running in the process to verify that the process corresponding to the process ID is a WebLogic Server instance.
    After the system is restarted, Node Manager checks each managed domain specified in the nodemanager.domains file to determine if there are any server instances that were not cleanly shutdown. This is determined by the presence of any lock files which are created by Node Manager when a WebLogic Server process is created. This lock file contains the process identifier for WebLogic Server startup script. If the lock file exists, but the process ID is not running, Node Manager will attempt to automatically restart the server.If the process is running, Node Manager performs an additional check to access the management servlet running in the process to verify that the process corresponding to the process ID is a WebLogic Server instance.
    */

  • Can not start managed server

    Hi All,
    I am trying to start one of the managed server which are in cluster but i am getting below error:
    Please suggest the issue and resolution if anyone has come across the same situation.
    <Oct 14, 2011 7:56:16 AM EDT> <Warning> <RMI> <BEA-080003> <RuntimeException thrown by rmi server: weblogic.rmi.internal.BasicServerRef@274, implementation: 'weblogic.jms.dispatcher.DispatcherImpl@4f6fa0b6', oid: '628', implementationClassName: 'weblogic.jms.dispatcher.DispatcherImpl'
    java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators, IntegrationAdministrators, AdminChannelUsers].
    java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators, IntegrationAdministrators, AdminChannelUsers]
    at weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager.java:833)
    at weblogic.security.service.SecurityServiceManager.getSealedSubjectFromWire(SecurityServiceManager.java:522)
    at weblogic.rjvm.MsgAbbrevInputStream.getSubject(MsgAbbrevInputStream.java:349)
    at weblogic.rmi.internal.BasicServerRef.acceptRequest(BasicServerRef.java:953)
    at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:351)
    Truncated. see log file for complete stacktrace
    >
    <Oct 14, 2011 7:56:16 AM EDT> <Warning> <RMI> <BEA-080003> <RuntimeException thrown by rmi server: weblogic.rmi.internal.BasicServerRef@274, implementation: 'weblogic.jms.dispatcher.DispatcherImpl@4f6fa0b6', oid: '628', implementationClassName: 'weblogic.jms.dispatcher.DispatcherImpl'
    java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators, IntegrationAdministrators, AdminChannelUsers].
    java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[weblogic, Administrators, IntegrationAdministrators, AdminChannelUsers]
    at weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager.java:833)
    at weblogic.security.service.SecurityServiceManager.getSealedSubjectFromWire(SecurityServiceManager.java:522)
    at weblogic.rjvm.MsgAbbrevInputStream.getSubject(MsgAbbrevInputStream.java:349)
    at weblogic.rmi.internal.BasicServerRef.acceptRequest(BasicServerRef.java:953)
    at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:351)
    Truncated. see log file for complete stacktrace
    >
    <Oct 14, 2011 8:12:03 AM EDT> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by weblogic>
    <Oct 14, 2011 8:12:06 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to SUSPENDING>
    [JCABindingManager] : This operation is not supported for JCA based MDB
    <Oct 14, 2011 8:12:07 AM EDT> <Notice> <Cluster> <BEA-000163> <Stopping "async" replication service>
    <Oct 14, 2011 8:12:08 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <Oct 14, 2011 8:12:08 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to SHUTTING_DOWN>
    <Oct 14, 2011 8:12:08 AM EDT> <Notice> <Server> <BEA-002607> <Channel "Default" listening on 10.172.108.9:26362 was shutdown.>

    From the managed server folder like servers/yourManagedServer rename the fodler named "data". Then restart the server. Basically this "data" folder will have ldap information and all groups, policies etc. It will create this folder again and get a copy of full data folder from admin server. Give this a shot.
    Thanks
    Ravi Jegga

  • Admin Server console not showing Managed Server is running

    I am using WLS 7.0.1.0 SP1 runing on Windows 2000. I have setup a node manager, Admin server and Managed Server as Windows Services. Admin Server has -delaySeconds as 2min. Manager Server(MS) has been made to depend on Admin Server start. When I boot my machine, all the three services come up properly. I can access my application which is running on MS properly. But for some reason the Admin Console doesn't show the MS as running. If I use the Admin Console now to start up MS all it does it "Reconnects to the admin server" since the MS is in started state. What is the reason for this

    It could be the ordering dependency and the rediscovery of the MS by the AS.
    An AS has a notion of where MS's live on disk and it could be an issue with
    AS bouncing in between MS's constant state of upness.
    Cheers
    mbg
    "Ajay Kulkarni" <[email protected]> wrote in message
    news:3ede0306$[email protected]..
    I am using WLS 7.0.1.0 SP1 runing on Windows 2000. I have setup a nodemanager, Admin server and Managed Server as Windows Services. Admin Server
    has -delaySeconds as 2min. Manager Server(MS) has been made to depend on
    Admin Server start. When I boot my machine, all the three services come up
    properly. I can access my application which is running on MS properly. But
    for some reason the Admin Console doesn't show the MS as running. If I use
    the Admin Console now to start up MS all it does it "Reconnects to the admin
    server" since the MS is in started state. What is the reason for this

  • Weblogic Server does not show managed server started when I used the Windows service to start it.

    I created a windows service to start a managed server and the services was created successfully and stated.  WHen I go to the Weblogic Server Admn console, the server is still showing shutdown.  Whenm I try to start it, it returns with error that the the service is not able to start.  Has anyone ran into anything similar.  I am running on Windows Server 2008R2 and running Weblogic Server 10.3.6 and Fusion Middleware 11.1.6.
    C

    Hi,
    For starting managed server as windows service there is no need of nodemanager .
    Please follow the steps given in the below doc:
    How to Install MS Windows Services For FMW 11g WebLogic Domain Admin and Managed Servers (Doc ID 1060058.1)
    Thanks,
    Sharmela

  • Client can not contact WSUS server.

    Hello everyone
    I have a WSUS 3.0 server (v3.2.7600.226) and 3 test clients.
    The WSUS server is on subnet xxx.xx.30.xx
    Client1 is on the same subnet as WSUS (no problem receiving updates)
    Client2 is on subnet 52(no problem receiving updates)
    Client3 is on subnet 25 (can not contact WSUS, therefore does not receive updates)
    All the clients are standalone machines, they do not belong to any domain.
    What I tried so far with no success:
    disabled firewall on server
    tried this fixit on the client: http://support.microsoft.com/kb/836941/en-us
    Stopped wuauclt and bits services, renamed
    %windir%/SoftwareDistribution folder, restarted services
    Read a number of forum posts and blogs but could not find a solution.
    Client3 Facts:
    It is a fresh windows 7 installation, no updates have been installed.
    Can ping the FQDN and IP address of WSUS server.
    Unlike Client1 and 2, Client3 can not visit the ISS7 web page when I enter the FQDN on a browser.
    Run checkdiag.exe which reported the following:
    wuaueng.dll version 7.6.7600.256....PASS
    This version is WSUS 2.0
    Checking AU Settings
    AU option is 4: Scheduled Install....PASS (Option is from policy settings)
    Checking Proxy configuration
    Checking for winhttp local machine Proxy settings...PASS
    Winhttp local machine access type
    <Direct Connection>
    Winhttp local machine Proxy....NONE
    Winhttp Local Machine ProxyByPass...NONE
    Checking user IE Proxy Settings.....PASS
    User IE Proxy......NONE
    User IE ProxyByPass......NONE
    User IE AutoConfig URL Proxy.....NONE
    User IE Autodetect, Autodetect not in use
    Checking Connection to WSUS/SUS Server:
    WUServer = http://testserver1.domain.com
    WUStatusServer: http://testserver1.domain.com
    UseWuServer is enabled....PASS
    Please have a look at my WindowsUpdate.log file:
    2014-06-10    15:15:05:255     892    cf8    AU    Triggering AU detection through DetectNow API
    2014-06-10    15:15:05:255     892    cf8    AU    Triggering Online detection (interactive)
    2014-06-10    15:15:05:255     892    af4    AU    #############
    2014-06-10    15:15:05:255     892    af4    AU    ## START ##  AU: Search for updates
    2014-06-10    15:15:05:255     892    af4    AU    #########
    2014-06-10    15:15:05:256     892    af4    AU    <<## SUBMITTED ## AU: Search for updates [CallId = {8DE7F082-26CD-4DB7-ACE5-1361F0EECC79}]
    2014-06-10    15:15:05:256     892    b2c    Agent    *************
    2014-06-10    15:15:05:256     892    b2c    Agent    ** START **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-06-10    15:15:05:256     892    b2c    Agent    *********
    2014-06-10    15:15:05:256     892    b2c    Agent      * Online = Yes; Ignore download priority = No
    2014-06-10    15:15:05:256     892    b2c    Agent      * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation'
    or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
    2014-06-10    15:15:05:256     892    b2c    Agent      * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2014-06-10    15:15:05:256     892    b2c    Agent      * Search Scope = {Machine}
    2014-06-10    15:15:05:256     892    b2c    Setup    Checking for agent SelfUpdate
    2014-06-10    15:15:05:256     892    b2c    Setup    Client version: Core: 7.6.7600.256  Aux: 7.6.7600.256
    2014-06-10    15:15:05:257     892    b2c    Misc    Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2014-06-10    15:15:05:261     892    b2c    Misc     Microsoft signed: Yes
    2014-06-10    15:15:26:268     892    b2c    Misc    WARNING: Send failed with hr = 80072ee2.
    2014-06-10    15:15:26:268     892    b2c    Misc    WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used
    : <>
    2014-06-10    15:15:26:268     892    b2c    Misc    WARNING: WinHttp: SendRequestUsingProxy failed for <http://testserver1.domain.com/selfupdate/wuident.cab>. error 0x80072ee2
    2014-06-10    15:15:26:268     892    b2c    Misc    WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
    2014-06-10    15:15:26:268     892    b2c    Misc    WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
    2014-06-10    15:15:26:268     892    b2c    Misc    WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
    2014-06-10    15:15:47:275     892    b2c    Misc    WARNING: Send failed with hr = 80072ee2.
    2014-06-10    15:15:47:275     892    b2c    Misc    WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used
    : <>
    2014-06-10    15:15:47:275     892    b2c    Misc    WARNING: WinHttp: SendRequestUsingProxy failed for <http://testserver1.domain.com/selfupdate/wuident.cab>. error 0x80072ee2
    2014-06-10    15:15:47:275     892    b2c    Misc    WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
    2014-06-10    15:15:47:275     892    b2c    Misc    WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
    2014-06-10    15:15:47:275     892    b2c    Misc    WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
    2014-06-10    15:16:08:280     892    b2c    Misc    WARNING: Send failed with hr = 80072ee2.
    2014-06-10    15:16:08:280     892    b2c    Misc    WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used
    : <>
    2014-06-10    15:16:08:280     892    b2c    Misc    WARNING: WinHttp: SendRequestUsingProxy failed for <http://testserver1.domain.com/selfupdate/wuident.cab>. error 0x80072ee2
    2014-06-10    15:16:08:280     892    b2c    Misc    WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
    2014-06-10    15:16:08:280     892    b2c    Misc    WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
    2014-06-10    15:16:08:280     892    b2c    Misc    WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
    2014-06-10    15:16:29:278     892    b2c    Misc    WARNING: Send failed with hr = 80072ee2.
    2014-06-10    15:16:29:278     892    b2c    Misc    WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used
    : <>
    2014-06-10    15:16:29:278     892    b2c    Misc    WARNING: WinHttp: SendRequestUsingProxy failed for <http://testserver1.domain.com/selfupdate/wuident.cab>. error 0x80072ee2
    2014-06-10    15:16:29:278     892    b2c    Misc    WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
    2014-06-10    15:16:29:278     892    b2c    Misc    WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
    2014-06-10    15:16:29:278     892    b2c    Misc    WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
    2014-06-10    15:16:29:278     892    b2c    Misc    WARNING: DownloadFileInternal failed for http://testserver1.domain.com/selfupdate/wuident.cab: error 0x80072ee2
    2014-06-10    15:16:29:278     892    b2c    Setup    WARNING: SelfUpdate check failed to download package information, error = 0x80072EE2
    2014-06-10    15:16:29:278     892    b2c    Setup    FATAL: SelfUpdate check failed, err = 0x80072EE2
    2014-06-10    15:16:29:278     892    b2c    Agent      * WARNING: Skipping scan, self-update check returned 0x80072EE2
    2014-06-10    15:16:29:278     892    b2c    Agent      * WARNING: Exit code = 0x80072EE2
    2014-06-10    15:16:29:278     892    b2c    Agent    *********
    2014-06-10    15:16:29:278     892    b2c    Agent    **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-06-10    15:16:29:278     892    b2c    Agent    *************
    2014-06-10    15:16:29:278     892    b2c    Agent    WARNING: WU client failed Searching for update with error 0x80072ee2
    2014-06-10    15:16:29:278     892    e50    AU    >>##  RESUMED  ## AU: Search for updates [CallId = {8DE7F082-26CD-4DB7-ACE5-1361F0EECC79}]
    2014-06-10    15:16:29:278     892    e50    AU      # WARNING: Search callback failed, result = 0x80072EE2
    2014-06-10    15:16:29:279     892    e50    AU      # WARNING: Failed to find updates with error code 80072EE2
    2014-06-10    15:16:29:279     892    e50    AU    #########
    2014-06-10    15:16:29:279     892    e50    AU    ##  END  ##  AU: Search for updates [CallId = {8DE7F082-26CD-4DB7-ACE5-1361F0EECC79}]
    2014-06-10    15:16:29:279     892    e50    AU    #############
    2014-06-10    15:16:29:279     892    e50    AU    Need to show Unable to Detect notification
    2014-06-10    15:16:29:279     892    e50    AU    Successfully wrote event for AU health state:1
    2014-06-10    15:16:29:279     892    e50    AU    AU setting next detection timeout to 2014-06-10 19:16:29
    2014-06-10    15:16:29:279     892    e50    AU    Setting AU scheduled install time to 2014-06-11 01:00:00
    2014-06-10    15:16:29:279     892    e50    AU    Successfully wrote event for AU health state:1
    2014-06-10    15:16:29:279     892    e50    AU    Successfully wrote event for AU health state:1
    2014-06-10    15:16:34:277     892    b2c    Report    REPORT EVENT: {98C8C30A-23A6-4534-9133-4DCB43C53245}    2014-06-10 15:16:29:278+0100    1  
     148    101    {D67661EB-2423-451D-BF5D-13199E37DF28}    1    80072ee2    SelfUpdate    Failure    Software Synchronization    Windows
    Update Client failed to detect with error 0x80072ee2.
    If anyone has any suggestions please do reply.
    Many thanks for your time.

    Client3 Facts:
    It is a fresh windows 7 installation, no updates have been installed.
    I'm having an issue with this statement, although I don't think it's a contributing factor. I'm skeptical how a "fresh Win7 installation" can get a v7.6 WUA installed... Win7RTM shipped with v7.4, and Win7SP1 shipped with v7.5 ... so SOMETHING updated this
    machine to WUA v7.6!
    Unlike Client1 and 2, Client3 can not visit the ISS7 web page when I enter the FQDN on a browser.
    This is your key consideration right here. If the browser can't get to the webserver, then the WUA ain't never gonna be able to get to the webservices hosted on that webserver.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Workshop App Works on Admin but Not On Managed Server

    Hi all, I have a very simple test Workshop App that works fine on an Admin server
    but not on a Managed Server. I have all the JMS and JDBC resources that the apps
    need, the console does not complain, they deploy fine, but for some reason I get
    exceptions when deployed to the Managed server but works fine on the Admin server.
    What's the difference between both servers? I start one with startWebLogic.cmd
    and the other one with startManageWebLogic.cmd in the same domain directory. The
    only resource that I have not been able to target to the managed server is WSStoreForwardInternalJMSServercgServer
    which I have no idea what it is or if it matters. Some portions of the app works
    when deployed to the managed server so I know it has deployed fine and some simple
    pages compile and work fine but when using certain JAR files in the lib directory
    I get weird exceptions on the managed server and not on the Admin server.
    I'd appreciate any help.
    Thanks, Jose

    Hi all, I have a very simple test Workshop App that works fine on an Admin server
    but not on a Managed Server. I have all the JMS and JDBC resources that the apps
    need, the console does not complain, they deploy fine, but for some reason I get
    exceptions when deployed to the Managed server but works fine on the Admin server.
    What's the difference between both servers? I start one with startWebLogic.cmd
    and the other one with startManageWebLogic.cmd in the same domain directory. The
    only resource that I have not been able to target to the managed server is WSStoreForwardInternalJMSServercgServer
    which I have no idea what it is or if it matters. Some portions of the app works
    when deployed to the managed server so I know it has deployed fine and some simple
    pages compile and work fine but when using certain JAR files in the lib directory
    I get weird exceptions on the managed server and not on the Admin server.
    I'd appreciate any help.
    Thanks, Jose

Maybe you are looking for

  • Curve 3G keeps deleting my txt messages..

    Hello all I have Curve 9300 3G, running on OS 6 (6.0.0.600, platform 6.6.0.223) The device is automatically deleting my messages after few feeks, starting from the oldest (they last about 1 month than they are deleted..) I have tried to look for an o

  • Can't copy files to NAS via smb

    I'm trying to move my Logic files to a NAS in a RAID 1 configuration prior to installation of Logic 9. I'm connecting via Samba. However, I'm continually getting this error message after only a few files are copied: "The operation can't be completed

  • Crashed Hard Drive!!! Please Help!

    Hi everyone, this is my first time on Mac Support, and I am in desperate need of help! I have a black Macbook with OS 10.4.11 with the 80gig hard drive. Unfortunately the hard drive crashed and I did not back it up. Here's how it happened: I bought a

  • Distributing an application over several projects

    I want to create a BC4J-application, which consists of two separated Projects: - the "model" project contains all entity, view and application objects - the "JSP" Project contains corresponding JSP-pages to access the application objects As recommend

  • Flash Player not working after installing update 11.6.602.171

    Running Windows 7, IE8.  Tried all of the "fixes" recommended on adobe's site - nothing worked.  Flash Player is installed on computer, but when try to play video, it says it is not installed.  Tried unistalling and reinstalling and all of the recomm