Vista Recovery crashed, Both the model is same, just OS are different.

Hi,
My model no is HP Pavilion Slimline s3760in Desktop PCs. My PC came with the pre-installed windows vista home premium 32-bit. i had problem with the dvd writer and it has been replaced recently and dvd is working fine.
When the writer was in defect at that time i have inserted the recovery disc into the dvd drive and wanted to recover my system to the factory settings. there was problem in writing/burning but atleast the dvd rom was able to read it therefore i thought the recover will work but unfortuantely it dint create any recovery to my system into factory settings and when i ejected the dvd i found that scatched has been created on it.  the recovery set of dvd has gone and it is unable to use it at all.
It has formatted the partition and it was unable to progress further.
At present i am unable to recover my system from RECOVERY DVD neither from Hard disk. Unable to use F11 recovery. Both are corrupted.
My friend has purchased same desktop model i.e. s3760in , but he has received pre-installed windows 7.
Therefore i want to know that if i bring his recovery disc and install it from the dvd.
q1] then will i get windows 7 and recovery manager for windows 7 or not?
q2] will it will work or not ?
Both the model is same, only OS are different.
please reply asap, as i need to fix this problem.
thanks inadvance.
bye

Hello Varadar, As far as I know, there is no such thing as a HP Master disk for a HP Recovery Restore. If the customer creates a set of HP Recovery Restore Disk and they are faulty and the D: Recovery partition is corrupted as well, then the customer can order a set of HP Recovery Restore disk from HP if they are still available for his system.
HP makes these disk available for just a few years. If these are no longer available the customer would have to purchase a Retail version of the operating system and any other software they may want.
The HP Recovery Restore disk are made from the software that has been installed on the system when the system was built, so almost every system will have different software.
The data code the is copied to the HP Recovery Restore Disk set is located in the BIOS of each system and relates to the serial number of the system. That is the key, the serial number of the computer.
When the HP Recovery Restore disk are used to restore a system, the Recovery Restore disk will read the BIOS for the correct serial number, before it will continue.
If you were to order the HP Recovery Disk set for a particular system, you would be required to provide the exact Model and Serial number for the system, and then HP could look into their database and determine what software was installed on that machine and then create a set of HP Recovery Restore disk for that serial numbered machine.
If your hard drive were to become faulty and under warranty, HP would look up the serial number of your system and determine the software that was shipped with this system and then install the software on a hard drive, and if the customer had the capacity to replace the hard drive, HP would ship a new hard drive with the D: Recovery partition already created, and the customer would install the new hard drive.
If the customer did not have the ability or knowledge to change a hard drive, the system would have to be sent back to HP for the hard drive replacement.
This is done to prevent pirating of the software and certain legal obligations to the providers of the software, such as Microsoft.
There is simply no way around this. Many have tried and all have failed. This is by design.
Hope this clarifies the issue a little more.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

Similar Messages

  • I want to see both the ssid in same time

    help in aironet 1200
    i hope to help me,
    i have created two ssid with two vlan's but the broadcast is for one ssid only, i want the broadcasting for all my ssid in same time. where that the one ssid be appeared and other one be a hiden.
    so how can i do that?
    I want to see both the ssid in same time
    EXD-AP#
    EXD-AP#sh run
    Building configuration...
    Current configuration : 4617 bytes
    version 12.3
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service password-encryption
    hostname EXD-AP
    ip subnet-zero
    ip domain name Schoch-home.com
    ip name-server 172.16.0.3
    aaa new-model
    aaa group server radius rad_eap
    aaa group server radius rad_mac
    aaa group server radius rad_acct
    aaa group server radius rad_admin
    aaa group server tacacs+ tac_admin
    aaa group server radius rad_pmip
    aaa group server radius dummy
    aaa authentication login default local
    aaa authentication login eap_methods group rad_eap
    aaa authentication login mac_methods local
    aaa authorization exec default local
    aaa accounting network acct_methods start-stop group rad_acct
    aaa session-id common
    dot11 vlan-name test vlan 1
    dot11 ssid EXDINT
       vlan 30
       authentication open
       authentication key-management wpa
       guest-mode
       infrastructure-ssid
       wpa-psk ascii 7 14120A0F410D243F04796166
    dot11 ssid GUEST
       vlan 20
       authentication open
       authentication key-management wpa
       wpa-psk ascii 7 13000F1646050A3E0B777A62
    username 78e400ed9588 password 7 06515724181E591C014E475354
    username 78e400ed9588 autocommand exit
    username 001e65ee5c38 password 7 135547430E5A512F2E712B606D
    username 001e65ee5c38 autocommand exit
    username 002668ec5b49 password 7 144742595A52722E277D31617B
    username 002668ec5b49 autocommand exit
    username 0022fc5b437b password 7 15425B5E562C28712A67667511
    username 0022fc5b437b autocommand exit
    username 00234d9fa256 password 7 075F711E1D5D1D5C1113595952
    username 00234d9fa256 autocommand exit
    username iqbal privilege 15 password 7 00010B02240A5955
    username c417fea872a3 password 7 04585F575827494F514E571641
    username c417fea872a3 autocommand exit
    username 0016cf264d57 password 7 040B5B5759224A1C5F4D014245
    username 0016cf264d57 autocommand exit
    username exd-hq privilege 15 password 7 00010B02240A5955
    username 00268202706b password 7 15425B5E527279747A64657411
    username 00268202706b autocommand exit
    username 002314054ea0 password 7 091C1E5B4A5443425E58012B7B
    username 002314054ea0 autocommand exit
    username 002436e8f6ca password 7 1249554546585A01722D722B32
    username 002436e8f6ca autocommand exit
    bridge irb
    interface Dot11Radio0
    no ip address
    no ip route-cache
    encryption mode ciphers tkip
    encryption vlan 30 mode ciphers tkip
    encryption vlan 20 mode ciphers tkip
    ssid EXDINT
    ssid GUEST
    speed basic-1.0 basic-2.0 basic-5.5 basic-11.0
    station-role root
    interface Dot11Radio0.20
    encapsulation dot1Q 20
    no ip route-cache
    bridge-group 20
    bridge-group 20 subscriber-loop-control
    bridge-group 20 block-unknown-source
    no bridge-group 20 source-learning
    no bridge-group 20 unicast-flooding
    bridge-group 20 spanning-disabled
    interface Dot11Radio0.30
    encapsulation dot1Q 30 native
    no ip route-cache
    bridge-group 1
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface Dot11Radio1
    no ip address
    no ip route-cache
    encryption mode ciphers tkip
    speed basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
    station-role root
    interface Dot11Radio1.20
    encapsulation dot1Q 20
    no ip route-cache
    bridge-group 20
    bridge-group 20 subscriber-loop-control
    bridge-group 20 block-unknown-source
    no bridge-group 20 source-learning
    no bridge-group 20 unicast-flooding
    bridge-group 20 spanning-disabled
    interface Dot11Radio1.30
    encapsulation dot1Q 30 native
    no ip route-cache
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface FastEthernet0
    ip address 192.168.30.10 255.255.255.0
    no ip route-cache
    duplex auto
    speed auto
    hold-queue 160 in
    interface FastEthernet0.20
    encapsulation dot1Q 20
    no ip route-cache
    bridge-group 20
    no bridge-group 20 source-learning
    bridge-group 20 spanning-disabled
    interface FastEthernet0.30
    encapsulation dot1Q 30 native
    no ip route-cache
    bridge-group 1
    no bridge-group 1 source-learning
    bridge-group 1 spanning-disabled
    interface BVI1
    ip address 192.168.30.10 255.255.255.0
    no ip route-cache
    ip default-gateway 192.168.30.1
    ip http server
    ip http authentication aaa
    no ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    ip radius source-interface BVI1
    radius-server attribute 32 include-in-access-req format %h
    radius-server vsa send accounting
    control-plane
    bridge 1 route ip
    line con 0
    line vty 0 4
    end
    EXD-AP#
    EXD-AP#
    EXD-AP#

    I think that my AP not support the MBSSID doue to it's very old , can  update it ? if i can that how i do that?
    System Software Version: Cisco IOS Software
    Product/Model Number:
    AIR-AP1210
    Top Assembly Serial Number:
    FHK0712J02R
    System Software Filename:
    c1200-k9w7-tar.123-8.JEA3
    System Software Version:
    12.3(8)JEA3
    Bootloader Version:
    12.2(8)JA
    System Uptime:
    3 days, 32 minutes

  • The model of graphics card on my laptop and on the product specs on hp website are different

    i have an HP Pavilion 15-e001AX   laptop, the model numbers of the graphics card on my laptop and the specifications given on hp site are slightly different.
    AMD Radeon HD 8650M/8670M  is specification given on web and AMD Radeon HD 8650G + 8600M Dual Graphics is given on my laptop.
    are these 2 the same? if so why is it displayed differently on my laptop?...
    This question was solved.
    View Solution.

    Hi:
    The HD 8650M is a typo on the HP specs.  The correct name of the graphics adapter is the  HD 8650G.
    That is the onboard graphics adapter. 
    The 8670M is the discrete video adapter which is supposed to kick in when the graphics demand is too much for the 8650G.
    Now for some odd reason, the device manager lists the 8670M graphics adapter as an 8600M because that is how the driver file description for the 8670M graphics adapter hardware ID is labeled.
    But your notebook has an 8670M discrete graphics adapter.  There is no such adapter as an 8600M.
    The 8600M is the series name.
    Below are the graphics adapters in the 8500M and 8600M series
    https://cyberraiden.files.wordpress.com/2013/08/amd-gpu-8500m.jpg

  • Do some app publishers allow use of both the ipad and iphone versions, even if different?

    Do some app publishers allow use of both the iPad and iPhone versions, even if one is coded differently for the iPad? Buy one and get both.

    Thanks,
    I was on the CAMRA web site
    http://m.camra.org.uk/support.php?tp=f&si=1&ai=29&qi=19&mob=0
    Their language makes it abiguous. When you go to the apps store there are two versions.

  • Why do games sync across both iPads, we have same Apple id but different Apple ID for iTunes and iCloud?

    I purchased two iPads, loaded both from backup off my computer, both hold my Apple ID, but my Partners has her own id on iTunes, iCloud (tend not to use this only back up via my computer) all works fine as before -- just changed from orginial iPad to ipad air2. But when playing any game, instead of enjoying how far we are progressing, each one tends to upt the others score? Thus both playing the same app. How can l stop this happening? It didn't happen with the old iPads. HELP

    TThanks for quick response , have now changed all three into Partners id, now will try games and try to win one, which in turn will alter score!, then see if it alters both! One point, can you tell me, that by changing Partners id in iTunes, she will still get my added music etc.? Thanks again

  • If I buy iWork on my iPhone, will I be able to install that same iWork through my apple account onto an iPad and be able to use that full screen? Or do i have to pay for a iPad version of iWork, where the screen settings and other stuff are different?

    I'd like to get iWork on both my ipad 2 and iphone 4 mainly for traveling purposes... Right now I lent my iPad to my dad whose in somewhere else now so I don't have access to the iPad. So, I was wondering if right now I buy iWork onto my iPhone, and then when the iPad comes home, can I install that same iWork I bought through my apple acout and not have to pay for another version, and the iPad iWork can go full screen beautifully and not ugly?

    iWork is universal, so it will work full-res on the iPad. This is true for any app which has the plus sign symbol (in the App Store in iTunes it will say "This app is designed for iPhone and iPad".
    Matt

  • How do I power off my phone when both the lock button and home button are malfunctioning?

    My home button and lock button don't work. My screen is frozen and I need to know if there's a way that I can power off my phone or reset it.

    Hold both down at same time for about 10-15 seconds and see if it restarts.   If not, the battery will eventually die at which point it will shut down.
    You'd need to get the phone repaired/replaced if your buttons are truly broken.

  • Both the download and cookie exception dialogs are empty. I know there are entries there but I can't see them. This has been a problem since release 5.0 on Mac OSX.

    They're empty, no entries. When I download a file I can see the download progress but once the download is finished the entry disappears.
    The Cookie Exceptions list is always empty. But I know the list contains entries because I have Firefox configured to ask me about allowing cookies. So there should be many entries with sites either allowed, allowed for session, or denied.

    I had the same issue: Exception list empty, but exceptions still present.
    I've inspected my permissions.sqlite file and found an entry with permission set to -1. After changing this to 1, all exceptions were visible again.

  • HT4847 I'm trying to delete (my stolen) iPhone 4s from my iCloud back up listing. But when i try although both the stolen and my new phone are listed if i try to delete the old one it comes up with a message 'cannot delete backup at this time'

    When i try to delete my stolen 4s from the icloud back u list i get a message saying 'ths cannot be deleted at this time' . This is taking up 2.2gb of space. How can i delete the device? I have unregistered the device and sent a remote wipe message to the phone.

    I did get rid of a few after I set the iphone to not show music which was in the cloud but I still have 2 albums that won't go away.  Any more suggestions?  Thanks for your help.

  • Can i do hardware compare using hsdio when the generation and acq clock rate are different

    Hi there
    my application should generate a digital stream in clock rate A with bus width (number of bits) very from 1 to 4 bits
    The DUT will response always on on bit but with clock rate B.
    1. can i use the hardware compare mechanism of the hsdio boards.
    2. if answer is YES is there any sample that can help me getting started.
    Thanks for advance
    Gabel Daniel
    Solved!
    Go to Solution.

    Hi,
    One good example to use as a starting point can be found in the NI Example Finder.  Navigate to "Hardware Input and Output" >> "Modular Instruments" >> NI-HSDIO >> Dynamic Acquisition and Generation >> Hardware Compare - Error Locations.vi.  You'll need to explicitly wire in your new rate into the "niHSDIO Configure Sample Clock.vi" on your response task.
    There is also a portion of this code that warns if the stimulus and response waveforms are not the same size.  This is not necessary, and could be deleted from the program. You are allowed to have different size stimulus and response waveforms.
    Jon S
    Applications Engineer
    National Instruments

  • Where is the "Model" In the MVC paradigm of WD4A?

    Hi All.
    I started WD4A around a month back. I have gone through various tutorials. I have never worked before with an MVC paradigm.
    I can now very well visualize a View and a controller - since these are the terms I read and encounter very often in WD4A.
    But where does the MODEL fit in?
    I asked my friends in WD4J and they say over there they need Model to wrap a BAPI call. In WD4A since there is no need to wrap a BAPI Call, does a model really exist?
    Can someone please shed light on this concept? Thanks.

    That's right, when working with WDJ, you do need to use a Model to wrap the RFC, BAPI, or web service.  The model in WDA is kind of different.  You know that MVC says that you should have good separation between the UI logic and the business logic, so it is suggest to put all of your business logic in a separate model class.  The term "Model" class is not specific to a certain kind of class, it is simply what the class does, the business logic.  The key thing to remember when creating this class, is that it should inherit from the CL_WD_COMPONENT_ASSISTANCE class.  This allows it to be used as an assistance class in your WDA component.  This gives you direct access to the class via the WD_ASSIST attribute which will be added when defining the assistance class in the WD component overview screen.  Then in your WDA component, you can simply do the business logic by coding....
    itab = wd_assist->read_data_from_db.
    Of course, you would then have to set the data to the context.
    This is basically the Model concept in WDA.
    Regards,
    RIch Heilman

  • Firefox was fine until the last update, now it crashes all the damn time

    It never crashed until the update to 9.1, now it just crashes all the time, various sites, just stops no warning, nothing.

    These links are of no help whatsoever, Firefox updated itself to 9.1. I have not added any software, hardware or changed a thing since before the update. It only started crashing unexpectedly after the update. Therefore, logic would conclude there's a glitch in the update wouldn't it? I have downloaded and reinstalled it twice since the update and the crashing began. The last time I did this was yesterday, so far so good..I'm keeping my fingers crossed.

  • HT1665 does the smart cover fit on both the new iPad and the iPad 2?

    I have both the iPad2 and i just got the new iPad and I'm wondering if I could put on the smart cover that i was using for my iPad 2 on the new iPad.
    Thankyou very much,
    Yours truley,
    Mohammed Madooh

    it depends on when you bought the smart cover -Apple changed the polarity of the magnets on the new iPad - Smarcovers bought in late 2011 or 2012 should work - those bought before then will not - for awhile Apple was offering exchanges for free on smart covers that dont work on the new iPad - dont know if they still are - you can call an Apple store or Apple online

  • Encrypt the data and make the model unusable

    hi, having to distribute the 3d animations made ​​with sap, I would like to be sure that the data contained in the CAD models exported (. rh. vds pdf 3d) can not be used to reconstruct the model. How can I encrypt the data and make the model unusable?
    thanks

    Max,
    There are other forms of file-based protection offered for mobile devices (SAP Afaria) and by other software vendors to secure the end deliverable (e.g. Adobe for 3D PDFs).   In addition, SAP's partner NextLabs offers a very comprehensive solution to automate the security of your sensitive information and even provide expiration dating.
    In addition to file protection, 3D Visual Enterprise includes a function to obfuscate the geometry itself thereby making reverse engineering almost impossible.   The "Randomize Objects" function can be used to randomly skew the vertices of the model by small amounts.  It keeps the normals correct, however, so that the object still looks smooth. This in turn makes precise measurements extremely difficult.
    Regards,
    Ken

  • Cannot find class in same package but in different file

    I have following two source files. Both the file has same package statement as below
    package java.buron.doeacc ;
    But whenever i try to compile File: shoepolish.java ( mainfram.java compiled succesfully before)
    following error message appear
    ..\..\buron\doeacc\shoepolish.java:12: cannot resolve symbol
    symbol : class MainFrame
    location: class java.buron.doeacc.shoepolish
              MainFrame mainFrame = new MainFrame();
    ^
    ..\..\buron\doeacc\shoepolish.java:12: cannot resolve symbol
    symbol : class MainFrame
    location: class java.buron.doeacc.shoepolish
              MainFrame mainFrame = new MainFrame();
    ^
    Please tell me What is the problem and how it can be solved.
    why cannot find the class that are in same package.
    I have JDK 1.3
    FOLLOWING ARE THE TWO FILES
    File: mainframe.java/////////////////////////////////////////////////////////////////////
    package java.buron.doeacc ;
    import javax.swing.* ;
    import java.awt.*;
    import java.awt.event.* ;
    class MainFrame extends JFrame
         private final String APP_NAME = "Shoe Polish";
         // constructor
         public MainFrame()
              super("Shoe Polish");
              setSize(500, 500);
              setVisible(true);
    File : shoepolish.java
    package java.buron.doeacc ;
    import java.io.* ;
    import java.buron.doeacc.* ;
    class shoepolish
         public static void main(String args[])
              MainFrame mainFrame = new MainFrame();

    The javac compiler uses the Classpath to find classes. If your directory structure is c:\myjava\buron\doeacc (for example) then you need to have c:\myjava in the Classpath when you compile. For example javac -classpath c:\myjava MainFrame.java

Maybe you are looking for