Visual C++ runtime error on startup audition cs5.5 win8.1

After reinstalling Audition cs5.5, I get a visual C++ runtime error at startup.  I have never had a problem before on a reinstallation.  I have tried uninstall and reinstall without any success.  Is their a version of Visual C++ that is needed here?  Is this an incompatibility problem with Win 8.1?  Has anyone else had this problem?  I haven't had any luck in the FAQ section.

The only issues I've ever heard about involving this appear to have been caused by having too many versions of the run-time on a machine. I'm not entirely sure what the situation with software only running properly with the version it was intended to is, but apparently clearing out older versions (you can check this out and remove them if you want using the normal uninstall routine) has fixed this particular problem on at least one occasion. It's worth investigating, anyway.

Similar Messages

  • Itunes causes Microsoft Visual C++ Runtime Error at Vista Startup

    I installed Itunes version 8.1.1 and Quicktime on my Toshiba laptop with Vista. The installation went in correctly and Itunes found my music library.
    However, when i rebooted the system, i get a Microsoft Visual C++ Runtime Error Library error message that states "This application has requested the runtime to terminate in an unusual way. The message persists and Vista will not boot up.
    I have to do a system restore in safe mode to get Vista usuable again.
    Has anyone seen this problem and can you help me find the culprit.

    Some people have reported that Apple Software Update can cause this error, so you might try removing that and see if it helps. Removing that utility should not affect iTunes, though you won't get automatic updates (you can just download any new version of iTunes or QuickTime manually and install it). It would, however, be wise to make a backup of any purchased content or items that would otherwise be difficult to replace, just in case something goes wrong.

  • Itunes 9.1 for windows causes visual c++ runtime error r6034

    howdy y'all,
    my setup ...
    os = win xp pro, sp3, current patches installed
    itunes = 9.1.0.79
    the original update was thru the apple software updater. after the error showed up on 1st start of itunes, i ...
    = rebooted the system = no fixee
    = uninstalled itunes, rebooted, reinstalled itunes, rebooted = no fixee
    since i updated to 9.1 i get the following errors at itunes startup ...
    [1] visual c++ runtime error r6034
    after i hit ok for item [1] i get ...
    [2] itunes cannot sync information ..SNIP.. because syncing has been disabled on this computer. do you want to enable syncing?
    if you do not enable ..SNIP.. to your ipod.
    after i hit yes for item [2] i get ...
    [3] itunes was unable to load provider data from sync services. reconnect or try again later.
    after i hit ok for item [3] itunes runs.
    the itouch shows up in the left panel "devices" list and is selectable. pressing the sync button on the itouch summary page triggers TWO dialogs of item [1]! hitting ok on them lets the sync go forward. i presume the only actual sync going on is the music. the sync finishes with no errors and says "ipod sync is complete. ok to disconnect."
    i haven't tested to get confirmation that anything is being synced so it might just be going thru the motions.
    item [1] is listed on the ms site here ...
    http://msdn.microsoft.com/en-us/library/ms235560%28VS.80%29.aspx
    it says the error is caused by a missing "manifest" and the fix is to rebuild the app with a proper one.
    links to the 3 error msg screen captures ...
    http://img163.imageshack.us/i/itunes91startuperror01.png/
    http://img6.imageshack.us/i/itunes91startuperror02.png/
    http://img408.imageshack.us/i/itunes91startuperror03.png/
    otherwise, itunes runs in its usual slothful [on windows] and crash-prone [on windows] manner.
    help, please?
    take care,
    lee
    Message was edited by: Lee Dailey
    Message was edited by: Lee Dailey
    Message was edited by: Lee Dailey
    Message was edited by: Lee Dailey

    Hi all,
    I could resolve some of the issues posted here with the fix offered by jeffcoffee under http://discussions.apple.com/thread.jspa?threadID=1595916&start=285&tstart=0 (However, I still have the R6034 error message. Would be great to have a fix for that too).
    This is what he did:
    copy the file 'sqlite3.dll'
    from 'C:\Program Files (x86)\Common Files\Apple\Apple Application Support'
    to 'C:\Program Files (x86)\Common Files\Apple\Mobile Device Support'
    *In a 32 bit Windows OS remove (x86) from the path.
    Another potential dll issue might be: 'libxml2.dll', follow the same copy routine. If the first one does not fix it.

  • Visual C++ Runtime Error R6016 not enough space for thread data

    I get these errors on startup of my Windows 8.1 (with all latest updates installed) after login.
    1. It would be helpful if the error message actually identified the exe or dll causing the problem.
    Program: C:\Progra...
    Is not a very helpful clue to the source of the error and because of its brevity comes across as being contemptuous of the user.
    Image > https://plus.google.com/photos/116576618429528389782/albums/6004901461676803857
    2. From the active apps Desktop toolbar it appears that this problem may be associated with
    Apple IE DAV
    3. I suspect that the problem announced by this error might also be contributing to the the fact that my Chrome browser now appears to be overlaid with a pink matt variation on its entire colour scheme. I have reported the pink matt error directly to Google
    Chrome support.
    Thanks
    Martin

    Hi,
    Have you noticed any event in local event viewer related to this error?
    Error reference:
    C Run-Time Error R6016
    http://social.technet.microsoft.com/Forums/en-US/13aa9b30-e00a-4ddc-9763-93702084bbea/visual-c-runtime-error-r6016-not-enough-space-for-thread-data?fo
    Also, I suggest you to test the issue in clean boot mode to narrow down the issue.
    How to perform a clean boot
    http://support.microsoft.com/kb/929135
    If the issue doesn’t appear in clean boot mod, you can determine which one can be the cause by using dichotomy in MSconfig. Checking on half of Non-Microsoft service and restart, determining which half of the services cause the issue and repeating to check
    half of the problematic half services.
    Otherwise, please test the issue in Safe mode and let me know the results, then provide the screenshot of the error.
    Kate Li
    TechNet Community Support

  • I have a visual C    runtime error stopping my pse elements 10 running in win 8.1. I am not a techie so am looking for a very clear way to resolve teh issue without needing too much technical ability. Can anyone help?

    I had been using my elements 10 for much of the day so do not know what I have done to upset it! I was starting up again and it began to load then offered me this line of script re a 'runtime error'. That means nothing to me except that it no longer works. I have had a peek on Google and see various suggested fixes from sources I don't know whether to trust. Also some fixes give a list of do's that to a non techie like me are not followable. Can anyone offer me some understandable guidance so I can get back to playing with my photos?

    You'll need to ask in the Photoshop Elements forum whose members can better answer this.
    Photoshop Elements
    Also keep a brief summary in the subject line and use the main posting window to describe your issue in detail.
    Subject: Visual C runtime error    as an example.

  • Acrobat 9.5.1 is causing a visual C++ runtime error in WORD 97

    acrobat 9.5.1 is causing a visual C++ runtime error in WORD 97

    Acrobat 9 should not have installed anything within Word 97: http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html.  You may want to check Tools > Macros to see if there's anything installed into that version of Word. 
    -David

  • Microsoft Visual C++ runtime error when building installer

    I'm trying to build an installer for a very simple VI I've created in 8.2.  Before the build is complete I get a Microsoft Visual C++ runtime error message pointing towards the labview.exe file.  I've already tried re-installing LabVIEW and deleting older versions of the LabVIEW Runtime engines with no luck.  I recently upgraded my system from LabVIEW 6.1 and I'm using Windows XP.  Any suggestions?
    Thanks.
    LabVIEW 2012 - Windows 7
    CLAD

    I included waveform storage, runtime engine 8.2, ni-visa-runtime and  ni-serial3.1. I tried to create a setup.exe by installer on an other pc. But it's completely the same behavior afterwards. I attached the error message. This message appears after I choose the path and continue the setup. It's the question which file is meaning.
    I tried to create a setup.exe by installer without any additional. 
    The strange thing is it was unsuccessful with following message. Maybe this will be helpful to find the problem.
    CDK_Item_OnDoProperties.vi.ProxyCaller >> CDK_Item_OnDoProperties.vi >> CDK_InstallerConfiguration_Editor.vi >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_BuildDevPart.vi >> NI_MDF.lvlib:MDFBuildDevPart_Open.vi
    Attachments:
    missing file message.JPG ‏15 KB

  • Apple pls fix this - MS Visual C++ Runtime error after installing itune 9.1

    Ever since I upgraded itune to the latest version 9.1, I kept getting the error messasge below when I start up the computer. Tried restoring system to a previous date, and uninstalling & installing itune a couple times to no avail. Any idea what's going on and how to fix this? I had to remove itune to be able to use my computer (ugh). The irony is that the itune upgrade was mainly to enable ipad. Now that I have my ipad I can't use itune.
    The error message reads:
    'MS Visual C++ Runtime Error' - 'Runtime Error'
    This application has requested the Runtime to terminate in an unusual way. Please contact the support team for further assistnace.

    Some people have reported that Apple Software Update can cause this error, so you might try removing that and see if it helps. Removing that utility should not affect iTunes, though you won't get automatic updates (you can just download any new version of iTunes or QuickTime manually and install it). It would, however, be wise to make a backup of any purchased content or items that would otherwise be difficult to replace, just in case something goes wrong during the removal.

  • VISUAL C++ RUNTIME ERROR

    I have a Lawson LBI portal that users run crystal reports in. The only thing on that server is the LBI.
    intermittently the users will run a report and then the LBI doesnt work. check the server we have a VISUAL C++ RUNTIME ERROR VISUAL DEBUG STUDIO.  We then have to reboot the server.
    any ideas what would be causing this, or a fix?

    Hi Sharon,
    Not much info to go on so SAP takes no responsibility for this. You should really check with Lawson. The message indicates you need to update the C++ distribution files/packages on that server which has nothing to do with CR.
    Use Google search for that error ( microsoft c++ redistribution package ) and you'll find more info on how to and what to but again, SAP takes no responsibilities, you really need to discuss with Lawson.
    Thanks again
    Don

  • Microsoft Visual C++ Runtime Error in iTunes

    The last few days I've tried to open iTunes and about 3-5 seconds after it opens I get an error report saying:
    "Software Application has encountered a problem and needs to close."
    I click "Don't Send."
    Immediatley afterward I get a error message saying:
    "Microsoft Visual C++ Runtime Error!"
    I click "OK" and iTunes closes automatically.
    So I checked out my QuickTime and I get a error saying:
    "We're unable to find iTunes on your computer."
    a few seconds later I get the C++ error message again.
    hmm...any thoughts?

    Its seems to be working now.
    I reinstalled Quicktime and updated iTunes.

  • Why do I get Microsoft Visual C++ Runtime error when I open Premiere Elements 11  on my windows 8 ?

    Why, when I open Premiere Elements 11 on my windows 8,  do I get"Microsoft Visual C++ Runtime error. This application has requested runtime to terminate it in an unusual way.Please contact the application support team for more information."
    Any solutions, thanks, Jim B.'

    jimmymega
    We will follow up when you have time.
    I am not sure if there is a misunderstanding in the communications. Please see
    but how do I identify the "http://forums.adobe.com/message/5129399 ? Is there somewhere where there is the number 51229399?
    When you click on that link, it should open to a thread with a discussion on troubleshooting the Microsoft Visual C++ Runtime Error situation. Did the link not open. It seems to be working. Please try clicking the link again and let us know the outcome.
    Thanks.
    ATR

  • I receive a Runtime Error when trying to go from Organizer to Editor. It reads:  Microsoft Visual C   Runtime Error....Runtime Error....Program c:/ (x....

    When trying to go from Organizer to Editor, I receive a Ryntime Error.  It reads: Microsoft Visual C++ Runtime Error.    Runrime Error  Program c:\(x....

    I kept getting the same error message too! Thank goodness I'm not alone in this!

  • Reader X crashes after launching with Visual C++ Runtime Error on Win7

    Reader X (10.1.2) just crashes shortly after launching. An error message box appears saying "Visual C++ Runtime Error". Not able to view any document! Please see the attached image for details.

    Could you please try the following and see if they help resolve the issue:
    1. Are you performing any specific operation which causes this error on your system? Or does it happen even if you just launch the application (without opening any PDF)?
    2. Please let me know the Antivirus software installed on your system.
        Try and temporarily disable the antivirus on your system and launch Adobe Reader. Does it still crash?
    3. How did you update to Reader 10.1.2? Was it via the updater mechanism? Or was it done by downloading the installer from the adobe website?
        If it was done via the updater (ARM) mechanism, could you let me know, if you launched Reader whilst the installation was in progress?
    4. Could you try and repair the installation from within the Control Panel > Programs and Features.
    Thanks
    Ankit

  • When updating iTunes on my Windows PC, I am getting a M/S Visual C   runtime error...can anyone suggest how to fix it?

    When updating iTunes on my Windows PC, I am getting a M/S Visual C   runtime error...can anyone suggest how to fix it?

    It has been discussed a few times, and is even available in the Apple support web site.  Basically, you need to un-install all teh Apple software you have installed, then re-install it all.  When you re-install, right click on theinstaller and select "Run as Administrator" to make sure it has The proper rights to complete the installation.

  • I get this error--"Microsoft Visual C++ Runtime Error, Program: c:\programfiles\mozillafirefox\firefox.exe, abnormal program termination" any ideas???

    I get this error--"Microsoft Visual C++ Runtime Error, Program: c:\programfiles\mozillafirefox\firefox.exe, abnormal program termination" any ideas???
    no specific web site causes this to happen.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Maybe you are looking for

  • Digital Signatures and SharePoint Workflow

    Hello, We are trying to combine .pdf documents (created in Acrobat 9 pro) requiring a series of digital signatures with a workflow process in MS SharePoint 2007.  If a Word document is used, each person in the workflow process can open the document o

  • Yosemite slow on Macbook Air

    Help! Seriously.... I updated to Yosemite the other day and since then my Macbook is extremely slow... It is really annoying, especially because I have no clue what the reason could be. I would really appreciate if anyone has an idea how to fix this.

  • con:async-request-queue

    Hi,           I've created the jms-queue, which was described in the manifest.xml, between the <con:async-request-queue> and <con:async-request-error-queue> -tags.           I've a problem with the async-request-queue... When I send a message, the me

  • What is the best way to match back 3rd party vendor data to our SQL Server Database?

    So we have this 3rd party data that we need to match back to our database. We have determined that the "ID" column that the 3rd party is sending us back data is a concatenated key of our member's SSN, Gender, and CCYYMMDD Birthdate. In 90% of the cas

  • Restore from Time Machine backup without a password?

    Here's the situation: I had a Mac which was backed up via Time Machine to an external USB drive. I no longer have the Mac, and I don't remember the old password. I got a new Mac and I want to restore my user account from the TM backup. QUESTIONS: 1.