Visual Studio Ultimate 2013 can't connect to IIS Express 7.5 on Windows 7 Virtual Machine Using Parallels 6.0
Here is what I am using:
MacBook Pro - Version 10.7.5 with 128 GB SSD
Parallels 6.0
Windows 7 Home Premium
Visual Studio 2013 Ultimate
IIS Express 7.5 download that changed it to IIS Express 8.0
I also have WebMatrix but I am not planning on using it.
I am a novice when it comes to development and these technologies so I am sure that has some impact on my issues.
I have spent a lot of time looking between the various forums to find a solution and they all seem to offer parts but not an entire and workable solution to solve the two errors that I receive when starting a new project and/or web site:
1-
Configuring IIS Express Failed with the following error:
Filename: redirection.config
Error: Cannot read configuration file
2-
Unspecified Error Exception from HRESULT: 0x80004005 (E_FAIL))
Based on the research I believe it has something to do where the IIS Express files are located on the Mac side of the computer. I have tried to map them back to the Windows machine but I still get the same errors.
I understand it should be looking in the documents folder on the C Driver for the user, which is Administrator. I have tried to redirect, open the port, change the Firewall settings to no avail. I believe it is something very simple
but I am not seeing it. I did turn on the Windows Features for IIS and removed the read only check box for the IIS Folder.
I have looked at the binding and port settings but cannot figure out how to make changes there. I think I need to remove local host and replace it with my computer name. I did try this but it didn't work. Here are the defaults:
Please let me know what you think and share a possible solution. Remember that I am a novice and some things will go over my head so the more detail the better.
I am happy to not use IIS Express and just use IIS because the volume of development is low. I am also open to using VS directly onto Azure and bypassing IIS if that is the best solution. I say this because I saw some posts that state there isn't
a workaround.
Thanks for taking the time to assist.
Hello jats1910,
Your problem may more related to IIS setting and configuration. But this forum is about Visual Studio Setup and Installation. If your Visual Studio installed without problem on your OS, then you may need to consult this issue on IIS forum.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
hi.......i have visual studio ultimate 2013 update 4......i want to create webapplication project but in my visual studio templates ,i cant see web option......or webapplication option..even i reset settings to webdevelopement.......so what should i do
now.....plz tell me very fastThanks for Bill's help.
Hi vinayakkadam143,
Like Bill's suggestion, firstly we have to make sure that we find the correct project template options.
But if you still get this issue, one possible reason is that the project templates don't load correctly.
Run the command line:
devenv.exe /InstallVSTemplates
Reference:
https://msdn.microsoft.com/en-us/library/ms241279.aspx
Or repair your VS, test it again.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Troubles with Visual Studio Ultimate 2013
Help, please, to resolve issue with Visual Studio Ultimate 2013:
VS 2013 Ultimate update 2
System.Exception
Пакет не прошел проверку обновлений, зависимостей или конфликтов.
Windows не удается установить пакет App.a5e822f7e.a1268.a4a33.aa189.adc2811990181, так как он зависит от другого пакета, который не удалось найти. Для установки пакета требуется как минимум версия 0.0.0.0 платформы Microsoft.VCLibs.120.00.Debug,
опубликованной any publisher. Предоставьте платформу вместе с пакетом.
at Microsoft.Expression.HostUtility.Platform.AppContainerProcessDomainFactory.CreateDesignerProcess(String applicationPath, String clientPort, Uri hostUri, IDictionary environmentVariables, Int32& processId, Object&
processData)
at Microsoft.Expression.DesignHost.Isolation.Primitives.ProcessDomainFactory.ProcessIsolationDomain..ctor(ProcessDomainFactory factory, IIsolationBoundary boundary, AppDomainSetup appDomainInfo, FrameworkName targetFramework,
String identifier, String baseDirectory)
at Microsoft.Expression.DesignHost.Isolation.Primitives.ProcessDomainFactory.CreateIsolationDomain(IIsolationBoundary boundary)
at Microsoft.Expression.HostUtility.Platform.AppContainerProcessDomainFactory.CreateIsolationDomain(IIsolationBoundary boundary)
at Microsoft.Expression.DesignHost.Isolation.Primitives.IsolationBoundary.Initialize()
at Microsoft.Expression.DesignHost.Isolation.Primitives.IsolationBoundary.CreateInstance[T](Type type)
at Microsoft.Expression.DesignHost.Isolation.IsolatedObjectFactory.Initialize()
at Microsoft.VisualStudio.ExpressionHost.Services.VSIsolationService.CreateObjectFactory(IIsolationTarget isolationTarget, IObjectCatalog catalog)
at Microsoft.Expression.DesignHost.Isolation.IsolationService.CreateLease(IIsolationTarget isolationTarget)
at Microsoft.Expression.DesignHost.Isolation.IsolationService.CreateLease(IIsolationTarget isolationTarget)
at Microsoft.Expression.DesignHost.IsolatedDesignerService.CreateLease(IIsolationTarget isolationTarget, CancellationToken cancelToken, DesignerServiceEntry& entry)
at Microsoft.Expression.DesignHost.IsolatedDesignerService.IsolatedDesignerView.CreateDesignerViewInfo(CancellationToken cancelToken)
at Microsoft.Expression.DesignHost.Isolation.IsolatedTaskScheduler.InvokeWithCulture[T](CultureInfo culture, Func`2 func, CancellationToken cancelToken)
at Microsoft.Expression.DesignHost.Isolation.IsolatedTaskScheduler.<>c__DisplayClassa`1.<StartTask>b__6()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
Thanks You!Hi Jaer,
>>System.Exception
Пакет не прошел проверку обновлений, зависимостей или конфликтов.
Windows не удается установить пакет App.a5e822f7e.a1268.a4a33.aa189.adc2811990181, так как он зависит от другого пакета, который не удалось найти. Для установки пакета требуется как минимум версия 0.0.0.0 платформы Microsoft.VCLibs.120.00.Debug,
опубликованной any publisher. Предоставьте платформу вместе с пакетом.
Since this forum is support the English language, so I suggest you can provide me the Exception message by the English.
In addition, I suggest you can provide me more detail message about your issue as the pvdg42's suggestion.
For example:
How did you get the system exception?
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I can't connect to iStores through iTunes on my Windows Xp machine. Everything is updated and I am getting message: We could not complete you iTunes Store request. An unknown error occurred (-1202). Any suggestions??
I have the same problem PLUS I get the "Genius is temporarily unable to show you related music..." whenever I select a song. This occurs even when I log in as Administrator. Updating to 8.0.1 did not fix either problem.
I can access the iTunes Store and download music. Genius had no problems uploading my iTunes Library info, and it can create playlists for selected songs. I believe this rules out communications and authorization problems. I have a G4 Mac Mini, a G5 PowerPC, and an Intel iMac with the same problem, so it's unlikely to be a Mac hardware issue. A firewall problem was unlikely (since I can access the iTunes Store), but I tested this with the firewall off. Both problems still remained. Updating Genius, turning Genius off and then on again, reinstalling iTunes 8, updating to 10.5.5, etc. did not work.
The only unusual factor is that I have HughesNet satellite 'broadband.' I cannot see how that would matter, but perhaps the individual song iTunes Store and Genius features don't get along with something in my HughesNet 'modem.' Any ideas from other users? -
Can't install my printer on Windows virtual machine using Leopard OS
Have just installed Leopard and Parrallels software. I cannot install my HP C3180 printer on the virtual windows machine. USB plug and unplug are not recognized and suspect it is because the printer is in use on the Mac OS side. How can I get the same printer to be connected and usable in both MAC and Windows virtual machines?
I had exactly the same issue as you when I wanted to print from my iMac to a printer that was attached to a Windows 7 machine.
I found the solution at an Apple Support page, located at "http://support.apple.com/kb/HT3049".
What really solved my problem was the introduction of the user PASSWORD in the address line, like this:
smb://user:password@workgroup/server/sharename
Read the Apple Support page I mentioned carefully to better understand what you will be doing.
I hope this helps you. -
I just started learning ASP.NET through a book, and it asks to connect to "your" SQL server and explore a .mdf file. I've been trying to install SQL, but I only just now got a working installation, and even then it won't let me install the Management
Software. Whenever I try to connect, I get this error: http://puu.sh/7F2JY.png
This is exactly what I do to connect:
1) Open project
2) Navigate to the Server Explorer
3) Click on connect to database
4) In this menu, I can see me Machine name on the top part, which I think means that it's picking up my server runningh
5) On the bottom, it wants me to enter a database name. I think this may be my problem, as I have no idea what to do here.
Also, when I double click on the database file, I get this errpr (52): http://puu.sh/7F2Yw.png
I really don't know what to do here, so post any tips down belowHi,
Did you choose the correct Server name? It should be the machine name where you installed SQL Server on.
Is it empty when you open select or enter database name drop box in the Add connect dialog box in the Visual Studio 2013?
“Update: I re-installed, and then used both installers. Now I have the Server Management tools, but I still cannot connect.”
The screenshots indicates that the SQL Server is not accessible.
Do you mean that you are not able to connect SQL Server by using SQL Server Management Studio?
If so, make sure that SQL Server Services is started.
Please check out the following articles for details:
How to: Start an Instance of SQL Server (SQL Server Configuration Manager)
http://technet.microsoft.com/en-us/library/ms190699(v=sql.105).aspx
Connect to Any SQL Server Component from SQL Server Management Studio
http://technet.microsoft.com/en-us/library/ms173871.aspx
Thanks.
Tracy Cai
TechNet Community Support -
Can't update Visual Studio Ultimate 2013 trial from 30 days to 90 days?
Hi,
I can't update the 30 day trial for Visual Studio 2013 Ultimate.
I have followed the instructions to register the product.
But although the message says "license downloaded successfully", the license stays at 30 days.
Any help would be appreciated?
ThanksHello jungleburger,
Have you installed any version of Visual Studio before?
For this license issue, please
call 1-800-426-9400,
Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific
Time) to speak directly to a Microsoft licensing specialist, and you can get
more detail information from there. You can also visit the following site for
more information and support on licensing issues:
http://www.microsoft.com/licensing/mplahome.mspx.
Actually I think normal steps
http://msdn.microsoft.com/en-us/library/gg442061.aspx would update the license. But if you failed, this may also related to the server.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Windows store app template problems in visual studio ultimate 2013 update 4 version
I couldn't find any template of windows store app under visual c# in my visual studio 2013 ultimate update 4 version...How can i install this template or which version of visual studio should i use...meanwhile i am using windows 7 ultimate 64 bit.......is
os is an issue.....kindly help meHi,
You can't develop Windows Store app with Windows 7. So when you installed VS 2013 on a Win7, the templates are not present. Only the template compatible with Win7 are installed.
Regards,
Yan Grenier
Merci de bien vouloir "Marquer comme réponse", les réponses qui ont répondues à votre question, et de noter les réponses que vous avez trouvé utiles. -
Auditing Help: Visual Studio Ultimate XAML Designer UI 2013/2012
While performing a licensing audit on computers in our domain many computers have come up as having "Visual Studio Ultimate XAML Designer UI 2013" and "Visual Studio Ultimate XAML Designer UI 2012" installed. Does this require ultimate
MSDN license to use? If not what level of licensing does it require? so we can issue the correct level of licensing. Laslty can this be uninstalled separately from visual
ThanksHi msdnskills,
As far as I know that the Visual Studio Ultimate XAML Designer UI 2013 is a component of Visual Studio Ultimate 2013.
About the Visual Studio Ultimate XAML Designer UI 2013 license issue, I suggest you can call 1-800-426-9400, Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist, and you can get more detail information
from there. You can also visit the following site for more information and support on licensing issues:
http://www.microsoft.com/licensing/mplahome.mspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hello,
I am trying to install Visual Studio Community 2013 in my machine but when I start the setup process I get the followingerror message:
Setup Blocked
Visual Studio Ultimate 2013 is currently installed on this machine. Please uninstall Visual Studio Ultimate 2013 and retry.
The problem is that I used to have VS Ultimate 2013 (Preview Edition, I think) installed on my machine but I've uninstalled it some time ago. It looks like something was left over in process.
What I've tried to do was to install VS Ultimate 2013 again, perform a repair operation and then uninstall it again. This uninstall process is reported to be successful. However, it did not solve my problem: VS Community 2013 installation still fails.
Does anyone have an idea how to solve this?
Thank you,
João Pedro"I used to have VS Ultimate 2013 (Preview Edition, I think) installed "
Sorry to be the bearer of bad news, but this sort of situation is exactly why potential users of pre-release software are warned NOT to install test software on production systems. While a new software version is in development, one of the LAST things to
be finalized is the uninstaller. So, uninstalling a test edition often leaves behind unwanted artifacts.
In your situation, I'd do a clean install of my OS, then install VS. -
Hi, can anyone help me further diagnose?
On Windows 7 64-bit, whenever I try to sign into Visual Studio Community 2013 I get a bunch of clicking sounds, and then "Something went wrong and we can't sign you in right now. Please try again later."
I installed the 2013 update 4 just recently (3/23)
I was getting this error back in FebruaryHi HuggyPaul,
Thank you for posting in MSND forum.
>>whenever I try to sign into Visual Studio Community 2013 I get a bunch of clicking sounds, and then "Something went wrong and we can't sign you in right now. Please try again later."
Based on your issue, I suggest you could try to use an another microsoft live-in user account to sign in the Visual Studio Community 2013 to check if you can sign in the VS2013 Community with update 4.
Or you could try to use same user account to sing same version of VS2013 Communty with Update 4 on other machien and the check if you can sign in this VS 2013 Community with update 4.
(1)If you could sign in the VS2013 Community update4 by the another user account on your machien, I think that the issue maybe related to your user account.
(2)If you still could not sign in VS 2013 Community update 4, maybe you will need to repair or re-install this VS2013 Community with update 4.
In addition, please tell me what browser you use on your machine.
If your machien just insatall other browser such as chrome, please try to install the IE and then check this issue again.
From this error message, i find a similar thread about your issue, maybe it can help you.
Referenece:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/49a611c6-cf70-4756-932c-1e26edddd9a1/something-went-wrong-and-we-cant-sign-you-in-right-now?forum=reportabug
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Can't install Visual Studio Professional 2013
Just got a new PC with a fresh install of Windows 8.1. I went to Dreamspark to download VS for my uni work, I got for Visual Studio Professional 2013 Update 4 web installer.
Only problem is every time I try to install I get an error message:
Set Up Failed!
Visual Studio prerequisites Fatal error during installation
KB2829760LP User Cancelled installation
I've tried to install on the Administrator account, re-downloaded the installer, got the ISO... I also tried to uninstall DirectX SDK and the distro's that came with it as I remember having problems installing it together with VS last time, but that didn't
work here. Thought I should mention the SDK here as it was the only thing I had installed before Visual Studio.
Thanks in advance for any help, I have saved an installing log if anyone needs to see it.Hi,
I see your log file and found main error in it:
Error 0x800b0003: Failed authenticode verification of payload: C:\ProgramData\Package Cache\.unverified\kb2829760v2_enu
Error 0x800b0003: Failed to verify signature of payload: kb2829760v2_enu
Failed to verify payload: kb2829760v2_enu at path: C:\ProgramData\Package Cache\.unverified\kb2829760v2_enu, error: 0x800b0003. Deleting file.
Error 0x800b0003: Failed to cache payload: kb2829760v2_enu
ailed to cache payload: kb2829760v2_enu from working path: C:\Users\Ricky\AppData\Local\Temp\{c96467b4-e480-4218-8fde-db83bf9d47d1}\kb2829760v2_enu, error: 0x800b0003.
Application requested retry of payload: kb2829760v2_enu, encountered error: 0x800b0003. Retrying...
Error 0x80070643: Failed to install MSI package.
Error 0x80070643: Failed to execute MSI package.
Error 0x80070643: Failed to configure per-machine MSI package.
Error 0x80070642: UX aborted on download progress.
Error 0x80070642: Failed to send progress from BITS job.
Error 0x80070642: Failure while sending progress during BITS job modification.
Error 0x80070642: Failed attempt to download URL: 'bits://go.microsoft.com/fwlink/?LinkId=428537&clcid=0x409' to: 'C:\Users\Ricky\AppData\Local\Temp\{c96467b4-e480-4218-8fde-db83bf9d47d1}\kb2829760v2_enu'
Error 0x80070642: Failed to acquire payload from: 'bits://go.microsoft.com/fwlink/?LinkId=428537&clcid=0x409' to working path: 'C:\Users\Ricky\AppData\Local\Temp\{c96467b4-e480-4218-8fde-db83bf9d47d1}\kb2829760v2_enu'
For error code 0x800b0003:
The same error was always checked in Windows Updates so please read this page:
http://support.microsoft.com/kb/822798?wa=wsignin1.0
The error 0x800b0003 is also listed on that page so could you please try that Fix it to fix first?
Also do you have all latest Windows Udpates installed? You may try this thread:
http://answers.microsoft.com/en-us/protect/forum/mse-protect_start/error-code-0x800b0003/10eb40e5-99d2-443d-8e56-697a33ab86ed
If you cannot also solve the problem please pay attention to the Error 0x80070642 code：
According to these errors, It seems the issue was due to you are using a web installer and your installation source may be corrupted.
You can download the latest Visual Studio Professional 2013 package now:
http://www.microsoft.com/en-us/download/details.aspx?id=44916
I recommend you can install the VS by ISO installer.
•Choose this download link, and then choose the Save button.
•After downloading the ISO file, you should use the
File Checksum Integrity Verifier tool to calculate and verify that the SHA-1 value for this file matches the value listed on the
Visual Studio 2013 ISO Files SHA-1 Values page.
And after down load you should follow up these
Installation Tips in the link to install your VS.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey. -
Hi, good day
Im going to have a little presentation before I finished my OJT and the topic that was given to is cloud computing. One of the task I need to do is to set up an application where in it can run and access real time on the "cloud". Now my prob is
I already have windows azure account, made my database, BUT don't know how to connect it to my Visual Studio 2010/2013 (which is more preferable?), and if I ever connect it when my Windows Form is made can it run on the cloud also, how? Please help. Thank
you so much.
PS: I will be discussing this with people who doesn't know much about computing can you send me tips what to discuss? Double Thank You. :)Thank you for the help.. Another thing can I run my Windows Form App also on the cloud? Like if I present is it possible that the application that I will be doing can be uploaded and accessed on the cloud by the audience and can be used by many at the
same time? Can you tell me how? Or give me a source how to do it? I downloaded the azure tools but I don't how to use it. I checked and tried activating and fixing my IIS and enabling support for ASP but still nothing, when I try to do cloudservice it says
"get azure tools" even though I already have it installed in my laptop, and when I try to right click and upload the project to azure I don't see the usual option 'Upload to Microsoft Azure'. My app is a simple phonebook app with add, edit, delete and search
function. Thanks again.. -
Please wait while windows configures microsoft visual studio professional 2013
After installing visual community 2013 and rebooting visual studio works fine but all other microsoft office programs display "please wait while windows configures microsoft visual studio professional 2013" and continues the installation for
about 1 minute before the program starts. I tried deleting mso.dll and reinstalling but it is still the same. Any help would be appreciated?Hi iwallhead,
Then can your VS work fine? Anyway, please upload the installation log.
Use a tool named collect.exe to collect the log file. Download
collect.exeand
run it directly. The utility creates a compressed cabinet of all the VS and .NET logs to
%TEMP%\vslogs.cab. Please upload the
vslogs.cab file on onedrive.
I will help check if any install error exists.
Best regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
AxAcroPDFLib.AxAcroPDF fails with MS Visual Studio Pro 2013
Hello.
I'm using MS Visual Studio Professional 2013 (Version 12.0.30501.00 Update 2) and MS .NET Framework Version 4.5.50938. I also have installed in my system (Windows 7 Home Premium - Service Pack 1) the Adobe Reader XI Version 11.0.07.
Before 3 months I have created a Windows Form Application with VS2013 and I've used the ActiveX tool "AxAcroPDFLib.AxAcroPDF". Everything was working normally.
I left this app for some time because of other obligations.
Now I've started using again my application and I get an error from VS2013 regarding the ActiveX control of AdobePDF in my app. The error I get is "Error HRESULT E_FAIL has been returned from a call to a COM component". I have re-installed three times Adobe Reader XI and I still get the same error.
Why VS cannot detect the COM component of Adobe reader?
I have the respective reference (Adobe Acrobat 7.0 Browser Control Type Library 1.0) added to my project and the tool (Adobe PDF Reader @C:\Program Files (x86)\Common Files\Adobe\Acrobat\ActiveX\AcroPDF.dll) added to my toolbox and when i try to add the tool again to my form I get the following error: "Failed to create component 'AxHost'. The error message follows: 'System.Runtime.InteropServices.COMException (0x80004005): A wrapper assembly is not registered for this type library....". This is just a part of the error.
AcroPDF.dll was last modified on 08/05/2014. So i suppose its a new version.
Can you please give me a solution?
Thank you in advance.
Message was edited by: John LolasIt's probably related to this KB that got posted after 11.0.07 shipped.
PDF applications built with VB6 don't work with Acrobat 11.0.07
Note the designation of the CPU building and the web application piece about calling the ActiveX control directly.
Maybe you are looking for
-
Print screen problem in pavilion - so complicated
Hi , I tried fn + prnt sc alt + ctrl + fn + prt sc nothing works it was so eays before with previous versions. just prt sc only.
-
How to implement a RFC to XI to Mail scenario?
Hello All, I need to implement a RFC to XI to Mail Scenario. RFC should contain the content of the mail. I need a Integration process which will read the RFC and transform it into a Mail I have a Mail reciever adapter but how will the content that i
-
Hello Experts, I am useing BPC 5.0, I am trying to create a EvDRE Grid report (Drag & Drop report in BPC Excel) I am Faceing an error as "EVDRE encountered an Error reteiveing data from the Web server". Thanks a lot for help. Cheers,
-
Recieving calls from the Philippines?
Hi, After searching the boards I've have not seen an answer that would clarify my question. I'm about to purchase a premium subscription for ulimitted calling got the US, but I have a fiance in the Philippines. The reason for the purchase is I tempe
-
Can not open all receiving videos from email and text ( iphone 4s) after update iso 7.1