Visual Web Developer 2010 Express and Oracle ODAC - Oracle data provider
system - xp pro
Microsoft Visual Web Developer 2010 Express and Oracle ODAC112021.
I can't seem to get the ODAC to work correctly with the Web Developer Express. When putting in a gridview I only see the standard adapters. The one from Oracle does not appear. I have spent days trying to figure out why but no luck. No one else seems to have this problem. I do not see any errors when I installed the ODAC. I've followed a few tutorials.
http://weblogs.asp.net/nannettethacker/archive/2010/09/17/installing-oracle-data-access-components-odac.aspx
and
http://www.smart-soft-nz.com/oracle-and-asp-dot-net.html
I tried using the Windows adapters but they just don't seem to work. I can get results in the query builder but when I go to the next step in the wizard I get the constraints error. I've done all the research on that with no luck so I wanted to use the ODAC. This killing me! This really shouldn't be that hard. I've added the dll to the references but again it's just not an option. If anyone could give me a little direction that would be great!!!!!!!!!!!!!!!!!!!!!!
Thank you
John
Dear Friends,
Installing SP1 and updates to it solved the first issue. So the database now seems to be of type 2008 R2.
Deleting some files solved the second issue.
However, another issue remains.
My most important projects were created with a version of VWDX 2010 that was downloaded from Microsoft and installed on July 3, 2012. This version of VWDX has now been lost, because my hard drive recently ceased to function and had to be replaced.
On the new hard drive I have a version of VWDX 2010 that was downloaded yesterday (May 28, 2014). As indicated above, I also installed SP1 and related updates.
When I load a project that was created in the version of VWDX 2010 that was installed almost two years ago and try to open the database connection, I get, in essence, the following error message:
"The database C:\Users\...\Database.mdf cannot be opened, because it is version 661. This server supports version 655 and earlier. A downgrade path is not supported."
So it seems that the original database version was 661, whereas the version downloaded yesterday is 655. It seems very strange that a version downloaded now should be earlier than a version downloaded two years ago. Does anyone have an explanation or a solution?
Thank you all for your trouble, and best regards.
Eric (orexin)
P.S. The site from which I obtained VWDX yesterday was:
www.microsoft.com/visualstudio/en-us/products/2010-editions/visual-web-developer-express and the executive was called VWD2010SP1AzurePack.exe.
Similar Messages
-
Visual Web Developern 2010 Express
I am trying to install the Web Platform Installer 5.0 so that I can download Visual Web Developer 2010 Express. It does not seem to be installing. It evidently is running, at least the task Manager says it is. I let it run all night, Probably a total
of 14hrs, but still not loaded. Any Help?As your issue is with WPI, I suggest that you visit the IIS forums and ask in the WPI forum here:
http://forums.iis.net/1155.aspx/1?Web+Platform+Installer -
Groupwise.wsdl in Visual Studio Web Developer 2010 Express
Hello,
I'm trying to add a "Service Reference" in VS Web Developer 2010 Express by importing the groupwise.wsdl file.
Everything looks fine when importing the file/adding the reference but when using it several things are missing (e.g. there is no GroupWiseBinding)
I tried with the groupwise.wsdl file of GW 8 and GW 7 SP3.
Should I use another .wsdl file or is this just not supported by VS Web Developer? (it works fine in Visual Studio 2010 Express)
Tx, vhaOriginally Posted by vha001
Hello,
I'm trying to add a "Service Reference" in VS Web Developer 2010 Express by importing the groupwise.wsdl file.
Everything looks fine when importing the file/adding the reference but when using it several things are missing (e.g. there is no GroupWiseBinding)
I tried with the groupwise.wsdl file of GW 8 and GW 7 SP3.
Should I use another .wsdl file or is this just not supported by VS Web Developer? (it works fine in Visual Studio 2010 Express)
Tx, vha
Replying to an old thread, but since i walked into this problem myself and google could not not help me, maybe this is usefull for others.
In Visual Studio 2010 (and 2008) you will need to add a Web Reference, not a Service Reference.
This is done by right clicking on References, selecting "Add Service Reference", clicking Advanced, and then "Add Web Reference".
Ray -
Connection of Mysql with visual web developer 2010 using visual basic
Aslam o Alaikum friends,
i want to connect my asp.net website with mysql database. i have successfully installed mysql and mysql connector 6.3.6
but i don't know how to connect my website with mysql database
please anyone can help meHello,
This should be asked in Microsoft's ASP.Net forums:
http://forums.asp.net/
As Microsoft's ASP.Net forums are on a different platform, we cannot move the question for you.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
How does one install a express sql server to run with Visual Web Developer 2008?
I successfully installed .NET framework v 3.5 and VWD 2008 on a new Vista laptop. When I want to add a Sql Server database to a website, errors tell me to install SS 2005 Express. MSDN SS 2005 Express download tells me I MUST first install .NET framework v 2.0 before SS 2005. When I try to install framework v 2.0, I'm sent to v. 3.5 and no way to download SS 2005.
How does one install a express sql server to run with Visual Web Developer 2008?Momark,
Do you still need help with this?
Thank you!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
I am new to this and a bit rusty with Java, Oracle, Web Development, et al; and, I need a free trial run at this time, Can we do this?
your itunes accoutn have nothing to d with your computer
you can go to any computer with internet access in the world and
login into your itunes account if you have the appleID and password
the itunes account is placed on apples itunes servers -
Listbox control in Visual Web Developer not working correctly
Not sure where to post this issue. I am developing a web app using Visual Web developer. I have created an .aspx page where I have placed a listbox control on the page and populate it when the page loads. When I select an item from the list the
listindex value is always -1. I can never get the index for the other values. I've used the following code,but get the same results:
For i = 0 To ListBox1.Items.Count - 1
If ListBox1.Items(i).Selected = True Then
val= ListBox1.Items(i).Value
End If
Next
val=nothing, listindex is -1 when i check
Any idea how to get around this issue?
ThxHello,
The TechNet Sandbox forum is designed for users to try out the new forums functionality. Please be respectful of others, and do not expect replies to questions asked here.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
How do i use directX in microsoft visual basic studio 2010 express ?
i am writing code to graph stock market prices using microsoft visual basic studio express
i want fast response (i do machine language) using directX
this is my problem
i have never used directX, and i have never used directX in visual basic studio
i followed a tutorial that went like this
Reference: Microsoft.DirectX
Microsoft.DirectX.Direct3D
Microsoft.DirectX.Direct3DX
Imports: Microsoft.DirectX
Microsoft.DirectX.Direct3D
Microsoft.DirectX.Direct3DX
Declare: Private D3Ddev As Device = Nothing
Private D3Dpp As PresentParameters = Nothing
Private DP As DisplayMode = Nothing
i found the reference dll's at C:\Windows\Microsoft.NET\DirectX for Managed Code\1.0.2902.0
when i imported microsoft.directX.direct3DX i got error #1
namespace or type specified in the imports 'microsoft.directX.direct3DX' doesn't contain any public member or cannot be found...
the same error occurs wether i use direct3DX \1.0.2911.0 or \1.0.2902.0
when i built and ran, i got error #2
microsoft visual basic 2010 express is waiting for an operation to complete ...
it hangs and i have to soft reset ctrl-alt-del
error #3
when i reference
Microsoft.DirectX
Microsoft.DirectX.Direct3D and
Microsoft.DirectX.Direct3DX
from C:\Windows\Microsoft.NET\DirectX for Managed Code\1.0.2902.0,
all my declares work:
D3Dpp = New PresentParameters() 'Initialize
some stuff for the Presentation parameters
D3Dpp.BackBufferFormat = DP.Format
D3Dpp.BackBufferWidth = DP.Width
D3Dpp.BackBufferHeight = DP.Height
D3Dpp.SwapEffect = SwapEffect.Discard 'There's flip, copy, and discard. Flip and Discard
are used most often.
D3Dpp.PresentationInterval = PresentInterval.Immediate 'Present the scene immediately
but when i start debugging (f5), i get this error message:
mixed mode assembly is built against version 'v1.1.4322' of the runtime and cannot be loaded in the 4.0 runtime without additional configuration information
i dont fully understand the visual studio process, but i think 'mixed mode' means run and debug. two seperate app's
i know this is a long question, but the forums don't answer it properly
i want it answered concisly. i am running windows 7 basic, and this is my question
can somebody give me a dozen lines of directX code that will work with my system, so that i can at least draw a line using directX 2D and 3D ?
thanks everybody :)Hi,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Since your issue is related to DirectX, I suggest you consult on DirectX forum:
http://xboxforums.create.msdn.com/forums/ for better response.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Two days ago I downloaded the web developer tool bar (aus2.mozilla.com). I tried to use it but gave up. I deleted the tool bar.
I don't have any images anymore. I use Google.com as my home page (default) and the large GOOGLE isn't there anymore. I've also noticed some of the sites I use don't have the continue or next or enter keys anymore. It seems the only thing I have now is the text.Are you sure you are looking at the Google page?? In Firefox 4.0 the default homepage / Start Page in Firefox was changed to '''about:home''' which looks a lot like the former www.google.com/firefox homepage.
-
Sharepoint 2010 comsumer and Sharepoint 2013 is the provider
The client has sharepoint 2010 as the consumer and 2013 as the provider for the service application "User profile service application"
When the client clicks on My profile and tries to change his picture we get an error mesage, when the logs were reviewed we see the below message
Timestamp Process TID Area Category EventID Level Message Correlation 09/05/2014 10:17:46.17 w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://xxxxx/_layouts/SelectPicture2.aspx?Type=User&accountname=yyyyy&IsDlg=1)
9f43fafd-1f9d-436b-9100-bbe66ed75e72 09/05/2014 10:17:46.18 w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ 9f43fafd-1f9d-436b-9100-bbe66ed75e72 09/05/2014 10:17:46.20 w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC
SharePoint Portal Server Runtime 7pm5 High Url Path: "/_layouts/SelectPicture2.aspx" 9f43fafd-1f9d-436b-9100-bbe66ed75e72 09/05/2014 10:17:46.21 w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Portal Server Runtime 7pma Exception Unhandled exception
caught during execution of Microsoft.SharePoint.Portal.PageBase::ErrorHandler(). Exception information: Exception information: System.IO.FileNotFoundException: The Web application at http://my-sites/ could not be found. Verify that you have typed the URL correctly.
If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application. at Microsoft.SharePoint.SPSite..ctor(SPFarm farm, Uri requestUri, Boolean contextSite, SPUserToken userToken) at
Microsoft.SharePoint.SPSite..ctor(String requestUrl) at Microsoft.SharePoint.Portal.WebControls.ProfileImagePicker.LoadPictureLibrary() at Microsoft.SharePoint.Portal.WebControls.ProfileImagePicker.<onload>b__0() at Microsoft.SharePoi... 9f43fafd-1f9d-436b-9100-bbe66ed75e72
09/05/2014 10:17:46.21* w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Portal Server Runtime 7pma Exception ...nt.SPSecurity.<>c__DisplayClass4.<runwithelevatedprivileges>b__2() at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated
secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode) at Microsoft.SharePoint.Portal.WebControls.ProfileImagePicker.OnLoad(EventArgs
ea) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoi... 9f43fafd-1f9d-436b-9100-bbe66ed75e72 09/05/2014 10:17:46.21* w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Portal Server Runtime 7pma Exception ...nt, Boolean includeStagesAfterAsyncPoint) System.IO.FileNotFoundException: The
Web application at http://my-sites/ could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application. at Microsoft.SharePoint.SPSite..ctor(SPFarm
farm, Uri requestUri, Boolean contextSite, SPUserToken userToken) at Microsoft.SharePoint.SPSite..ctor(String requestUrl) at Microsoft.SharePoint.Portal.WebControls.ProfileImagePicker.LoadPictureLibrary() at Microsoft.SharePoint.Portal.WebControls.ProfileImagePicker.<onload>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<runwithelevatedprivileges>b__2() at Microsoft.SharePoint.Utilities.... 9f43fafd-1f9d-436b-9100-bbe66ed75e72 09/05/2014 10:17:46.21* w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Portal Server
Runtime 7pma Exception ...SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.SharePoint.Portal.WebControls.ProfileImagePicker.OnLoad(EventArgs ea) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 9f43fafd-1f9d-436b-9100-bbe66ed75e72 09/05/2014 10:17:46.21
w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Server Unified Logging Service c91s Monitorable Watson bucket parameters: SharePoint Server 2010, ULSException14, 06d8f9f3 "sharepoint portal server", 0e00178d "14.0.6029.0", 1f65804a "microsoft.sharepoint",
0e0017f9 "14.0.6137.0", 5136df43 "wed mar 06 00:16:35 2013", 000057b4 "000057b4", 00000077 "00000077", 4d150129 "filenotfoundexception", 37706d61 "7pma" 9f43fafd-1f9d-436b-9100-bbe66ed75e72 09/05/2014
10:17:46.21 w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Foundation Runtime tkau Unexpected System.IO.FileNotFoundException: The Web application at http://my-sites/ could not be found. Verify that you have typed the URL correctly. If the URL should be serving
existing content, the system administrator may need to add a new request URL mapping to the intended application. at Microsoft.SharePoint.SPSite..ctor(SPFarm farm, Uri requestUri, Boolean contextSite, SPUserToken userToken) at Microsoft.SharePoint.SPSite..ctor(String
requestUrl) at Microsoft.SharePoint.Portal.WebControls.ProfileImagePicker.LoadPictureLibrary() at Microsoft.SharePoint.Portal.WebControls.ProfileImagePicker.<onload>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<runwithelevatedprivileges>b__2()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunEleva... 9f43fafd-1f9d-436b-9100-bbe66ed75e72 09/05/2014 10:17:46.21* w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Foundation Runtime tkau Unexpected ...ted secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback
secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode) at Microsoft.SharePoint.Portal.WebControls.ProfileImagePicker.OnLoad(EventArgs ea) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
9f43fafd-1f9d-436b-9100-bbe66ed75e72 09/05/2014 10:17:46.21 w3wp.exe (XYZXYZXYZ:0x26E0) 0x5DEC SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://xxxxx/_layouts/SelectPicture2.aspx?Type=User&accountname=yyyyy&IsDlg=1)).
Execution Time=50.9131783692527 9f43fafd-1f9d-436b-9100-bbe66ed75e72 </runwithelevatedprivileges></onload></runwithelevatedprivileges></onload></runwithelevatedprivileges></onload>
Checked the Alternative access mapping on the provider server and it looks good.
what would cause this to happne and how can this be resolved
SatyamCameron,
Thanks for taking the time to reply.
Actually, it may not be related to compatibility. Let me explain in detail (As below)
Client has 2 different environments SharePoint 2010 and SharePoint 2013.
On SharePoint 2010 they have the web application-Site collections, however for My sites they use SharePoint 2013, where the trust (Root certificate and the STS ) was shared... Making the SP2010
as the consumer and SP 2013 as the provider.
When a user from SharePoint 2010, click on my profile the user is then taken to this page "edituserprofile.aspx"
which still has the look and feel of sharepoint 2010, and under pictures when we choose the button "Choose Picture" we get the error message with the corelation ID, when checked the ULS logs we get the message (Mentioned in the first post and is
also mentioned below)
"Exception Unhandled exception caught during execution of Microsoft.SharePoint.Portal.PageBase::ErrorHandler().
Exception information: Exception information: System.IO.FileNotFoundException: The Web application at http://my-sites/ could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator
may need to add a new request URL mapping to the intended application. "
I have checked the AAM and it looks good.
When the user clicks on my profile on SP2010 environment , the user must be diverted to the sp2013 environment to update his information...correct ?
Satyam.. -
Why the tree show different while i use XML and XMLList as the data provider
Code is as follows:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:services="services.*" layout="vertical">
<services:CommonSvc id="ws" NameSpace="ws.wsSysDict" creationComplete="ws.getXmlList()"/>
<mx:Tree width="100%" height="100%" labelField="@Name" dataProvider="{ws.xml}" fontSize="18" showRoot="false"/>
</mx:Application>
Shown below:
as you see above,the font show Incomplete, if i change the dataprovider as follows:
<mx:Tree width="100%" height="100%" labelField="@Name" dataProvider="{ws.xml.obj}" fontSize="18" showRoot="false" />
it show complete when i use xmllist as the tree's dataprovider
why it show like that while i use the xml as the tree's dataprovider,hope anybody's helpingXML is a single node, XMLList is multiple nodes. ShowRoot will affect the
display -
Not able to connect VS Web Developer Express through instant client 10
I just spent 10 hours attempting to connect Web Developer Express 2010 to an Oracle 10g database. In the end the solution was beyond simple, but with the existing threads there is a lot of talking around the problem. I’m posting this in case it might help someone else.
Obtain the Oracle instant client software that will work for your database. You will only need the basic package.
http://www.oracle.com/technetwork/database/features/instant-client/index-100365.html
Extract the contents to a temp location on your hard disk
Create a directory for the application – it could be anything, but here is what I used
C:\instantclient
Copy the extracted files into the directory you just created.
Right click on my computer and choose properties
Under advanced and environment variables you will need to add the directory you created above to the system variables PATH. You will need to create a new system variable called TNS_ADMIN and put the same c:\instantclient path in it.
Create the file tnsnames.ora under the c:\instantclient directory and put your customized entry in it. Below is an example.
tnsnams.ora file contents
<Alias for this tnsnames entry> =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = <Your Oracle Server>)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = <Your database instance>)
It’s a good idea to restart your system after this installation.
In web developer express use the .NET Framework Data Provider for OLE DB.
Here is the key piece of information!!
Under server name you need to use the alias from the tnsnames.ora file entry. If you do not do this it will not pick up the SERVICE_NAME parm and will give you some goofy error like:
ORA-12514: TNS:listener could not resolve SERVICE_NAME given in connect descriptor
or
ORA-12514: TNS:listener does not currently know of service requested in connect descriptorI just spent 10 hours attempting to connect Web Developer Express 2010 to an Oracle 10g database. In the end the solution was beyond simple, but with the existing threads there is a lot of talking around the problem. I’m posting this in case it might help someone else.
Obtain the Oracle instant client software that will work for your database. You will only need the basic package.
http://www.oracle.com/technetwork/database/features/instant-client/index-100365.html
Extract the contents to a temp location on your hard disk
Create a directory for the application – it could be anything, but here is what I used
C:\instantclient
Copy the extracted files into the directory you just created.
Right click on my computer and choose properties
Under advanced and environment variables you will need to add the directory you created above to the system variables PATH. You will need to create a new system variable called TNS_ADMIN and put the same c:\instantclient path in it.
Create the file tnsnames.ora under the c:\instantclient directory and put your customized entry in it. Below is an example.
tnsnams.ora file contents
<Alias for this tnsnames entry> =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = <Your Oracle Server>)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = <Your database instance>)
It’s a good idea to restart your system after this installation.
In web developer express use the .NET Framework Data Provider for OLE DB.
Here is the key piece of information!!
Under server name you need to use the alias from the tnsnames.ora file entry. If you do not do this it will not pick up the SERVICE_NAME parm and will give you some goofy error like:
ORA-12514: TNS:listener could not resolve SERVICE_NAME given in connect descriptor
or
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor -
Designer using Dreamweaver in a Microsoft Visual Studio development environment
I'm a designer using a Mac with Dreamweaver CS3 to design
pages on a web app. The team I work with is using Microsoft Visual
Studio to manage projects, check files in and out, etc. Each of us
has a MS Windows Server 2003 with a local copy of the site.
I only use Visual Studio to manage the project by checking in
and out, and managing the project files because the Mac has a large
display and is my primary computer.
I was wondering if there was a way I could check files out so
my team members see them as locked when I'm editing them, and vice
versa in Dreamweaver on my Mac.
How do I set up my site in Dreamweaver to do this?
I don't think I want to set up the site as an FTP. What's an
RDS?I'd probably ask them here about setup.
Microsoft Visual Studio and Visual Web Developer Express forum on ASP.Net
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Web Developer needed in Louisville, Kentucky - Full-time Position
Hey guys and gals! This is a real job - not a contract job,
not a freelance job, but a real full-time paid job in a
professional office.
So if you are wanting to settle down and make a consistent
wage and have some fun coding, then give me a yell. Must be willing
to move to
Louisville, Kentucky (USA) area. Serious inquiries only.
We are a small but quickly growing company. We have many web
development projects in the pipe and many coming down the pipe. We
are
looking for a solid Flash Animation / Actionscript / PHP /
MySQL programmer with osCommerce / CRE Loaded experience
(preferred).
We would also like a candidate to have experience with:
1. Relational database knowledge
2. SQL Syntax Experience
3. HTML and CSS Web Layout
4. Flash 8 (ActionScript 2.0)
5. ASP (Classic 3.0)
6. PHP
We would also prefer experience with:
1. ASP.NET 2.0
2. Database Engines: MySQL, MS SQL Server, Access
3. Visual Basic
4. XHTML / CSS Advanced Layout
5. Access Database Programming (VBA)
6. Photoshop (basic usage and slicing)
7. Windows Server 2003 & IIS 6
General Skills and Abilities:
- Communicate with clients on a technical and non-technical
level.
- Basic project management skills (ability to organize tasks
and communicate status, timeframes, and changes needed).
- Ability to work with little to moderate supervision.
- Ability to self educate and learn new techniques and
skills quickly.
- Ability to work in fast paced, casual environment where
tasks and priorities may change from day to day.
- Must be reliable and dedicated with a high work ethic.
- Ability to be professional around clients and have fun
when not.
- Able to lift up to 55lbs.
- Able to sit for long periods of time.
- Able to view computer screens for long periods of time.
- Able to use computer input devices such as keyboard and
mouse.
- Able to easily communicate with clients via e-mail,
telephone, or written methods.
- Some travel may be required to meet with clients to
discuss projects. Mostly local, but may have some overnight stays
(rare).
We may offer moving expenses on a case by case basis.
Day to day overview:
A normal day would consist of arriving at the office and
being prepared to work at 9am (Monday through Friday). Your task
list will be
created for that day or week (whichever makes sense). You
will work through the task list until completed.
Tasks will be taking a web development project from start to
finish. Setting up the web server, creating the database structure,
coding any
programming necessary. Also will assist with general web
development tasks such as slicing a web design in Photoshop,
creating the HTML layout of the website, changes to existing
websites, etc.
Flash animiations, flash video production, and Actionscript
programming will also be performed by this position.
We are a small, but growing company, so other duties may be
requested to help fill in gaps where needed. We pride ourselves on
customer
service and being responsive to our clients. A positive, "can
do" attitude is required.
There will be a lot of freedom and opportunities to help
improve the organization and how projects are completed. We are
growing rapidly,
so opportunities for professional growth and promotion will
be given to staff that go above and beyond and show initiative.
Some overtime will be required to meet deadlines and keep
project workload under control.
About Media Marketers:
Formed in 2001 as an advertising and promotional company,
Media Marketers has found a niche and grown in Web Development,
Video Production,
and Marketing. Our office is located in the heart of the
Bluegrass Industrial Park on the east side of Louisville. This
location allows us
quick access to many resources. Our work environment is
casual, open, friendly, and caring. We are a small company and
value our staff's
creative ideas. We strive to push the web development and
marketing envelope with solid technologies and highly creative
designs and ideas.
We educate our clients on technology and marketing and help
them improve their image, streamline their workflow, and
disseminate
information.
Anyone qualified, interested, and hard working should send a
resume and cover letter to:
[email protected]
or
Careers
Media Marketers, Inc.
1808 Cargo Ct
Louisville, KY 40299
Website: www.MediaMarketers.com
No phone calls please. Equal Opportunity EmployerHi,
Is this still available? Current location Captain Cook -
S.Kona. 8 yrs CF/SQL etc.
Thanks -
Table display in Visual Web JSF (Project woodstock)
Hi...
I am trying to display a table(Quota) from a database in Visual Web JSF(project woodstock) and it works fine, as in I am able to run the project and a browser opens up dislaying the page with the date from the table. However when I try to display another table (Booking) from the same database, I am having problems. The page renders with no content(BLANK) in the browser. I am not sure why this is happening as I am using the same technique used to display content from the Quota table.
This is my jsp code to display the Quota table ( this is the table that loads fine)
<jsp:root version="2.1" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page"
xmlns:webuijsf="http://www.sun.com/webui/webuijsf">
<jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
<f:view>
<webuijsf:page id="page1">
<webuijsf:html id="html1">
<webuijsf:head id="head1">
<webuijsf:link id="link1" url="/resources/stylesheet.css"/>
</webuijsf:head>
<webuijsf:body id="body1" style="-rave-layout: grid">
<webuijsf:form id="form1">
<h:panelGrid id="gridPanel1" style="left: 216px; top: 216px; position: absolute">
<webuijsf:staticText id="staticText1" style="font-size: large" text="FACILITY"/>
<webuijsf:table augmentTitle="false" id="table1" title="Table" width="0">
<webuijsf:tableRowGroup id="tableRowGroup1" rows="5" sourceData="#{SessionBean1.quotaArray}" sourceVar="currentRow">
<webuijsf:tableColumn headerText="allocatedhours" id="tableColumn1" sort="allocatedhours">
<webuijsf:staticText id="staticText2" text="#{currentRow.value['allocatedhours']}"/>
</webuijsf:tableColumn>
<webuijsf:tableColumn headerText="yearofStudy" id="tableColumn2" sort="yearofStudy">
<webuijsf:staticText id="staticText3" text="#{currentRow.value['yearofStudy']}"/>
</webuijsf:tableColumn>
</webuijsf:tableRowGroup>
</webuijsf:table>
</h:panelGrid>
</webuijsf:form>
</webuijsf:body>
</webuijsf:html>
</webuijsf:page>
</f:view>
</jsp:root>Below is the jsp code to view the Booking table ( I am just getting a blank web page when I run the project with this code).
<jsp:root version="2.1" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page"
xmlns:webuijsf="http://www.sun.com/webui/webuijsf">
<jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
<f:view>
<webuijsf:page id="page1">
<webuijsf:html id="html1">
<webuijsf:head id="head1">
<webuijsf:link id="link1" url="/resources/stylesheet.css"/>
</webuijsf:head>
<webuijsf:body id="body1" style="-rave-layout: grid">
<webuijsf:form id="form1">
<h:panelGrid id="gridPanel1" style="left: 216px; top: 216px; position: absolute">
<webuijsf:staticText id="staticText1" style="font-size: large" text="FACILITY"/>
<webuijsf:table augmentTitle="false" id="table1" title="Table" width="0">
<webuijsf:tableRowGroup id="tableRowGroup1" rows="5" sourceData="#{SessionBean1.bookingArray}" sourceVar="currentRow">
<webuijsf:tableColumn headerText="bookingdate" id="tableColumn1" sort="bookingdate">
<webuijsf:staticText id="staticText2" text="#{currentRow.value['bookingdate']}"/>
</webuijsf:tableColumn>
<webuijsf:tableColumn headerText="bookingendtime" id="tableColumn2" sort="bookingendtime">
<webuijsf:staticText id="staticText3" text="#{currentRow.value['bookingendtime']}"/>
</webuijsf:tableColumn>
</webuijsf:tableRowGroup>
</webuijsf:table>
</h:panelGrid>
</webuijsf:form>
</webuijsf:body>
</webuijsf:html>
</webuijsf:page>
</f:view>
</jsp:root>Hi..guys..
The following is the code from my 'SessionBean1'.java file.
package com.TestApp.managedbean;
import com.TestApp.dao.QuotaFacadeLocal;
import com.TestApp.entity.Quota;
import com.TestApp.dao.BookingFacadeLocal;
import com.TestApp.entity.Booking;
import java.util.List;
import javax.ejb.EJB;
import com.sun.rave.web.ui.appbase.AbstractSessionBean;
import javax.faces.FacesException;
* <p>Session scope data bean for your application. Create properties
* here to represent cached data that should be made available across
* multiple HTTP requests for an individual user.</p>
* <p>An instance of this class will be created for you automatically,
* the first time your application evaluates a value binding expression
* or method binding expression that references a managed bean using
* this class.</p>
public class SessionBean1 extends AbstractSessionBean {
// <editor-fold defaultstate="collapsed" desc="Managed Component Definition">
* <p>Automatically managed component initialization. <strong>WARNING:</strong>
* This method is automatically generated, so any user-specified code inserted
* here is subject to being replaced.</p>
private void _init() throws Exception {
// </editor-fold>
* <p>Construct a new session data bean instance.</p>
public SessionBean1() {
@EJB
private BookingFacadeLocal bookingDAO;
private Booking[] bookingArray;
@EJB
private QuotaFacadeLocal quotaDAO;
private Quota[] quotaArray;
* <p>This method is called when this bean is initially added to
* session scope. Typically, this occurs as a result of evaluating
* a value binding or method binding expression, which utilizes the
* managed bean facility to instantiate this bean and store it into
* session scope.</p>
* <p>You may customize this method to initialize and cache data values
* or resources that are required for the lifetime of a particular
* user session.</p>
@Override
public void init() {
// Perform initializations inherited from our superclass
super.init();
// Perform application initialization that must complete
// *before* managed components are initialized
// TODO - add your own initialiation code here
// <editor-fold defaultstate="collapsed" desc="Managed Component Initialization">
// Initialize automatically managed components
// *Note* - this logic should NOT be modified
try {
_init();
} catch (Exception e) {
log("SessionBean1 Initialization Failure", e);
throw e instanceof FacesException ? (FacesException) e: new FacesException(e);
// </editor-fold>
// Perform application initialization that must complete
// *after* managed components are initialized
// TODO - add your own initialization code here
* <p>This method is called when the session containing it is about to be
* passivated. Typically, this occurs in a distributed servlet container
* when the session is about to be transferred to a different
* container instance, after which the <code>activate()</code> method
* will be called to indicate that the transfer is complete.</p>
* <p>You may customize this method to release references to session data
* or resources that can not be serialized with the session itself.</p>
@Override
public void passivate() {
* <p>This method is called when the session containing it was
* reactivated.</p>
* <p>You may customize this method to reacquire references to session
* data or resources that could not be serialized with the
* session itself.</p>
@Override
public void activate() {
* <p>This method is called when this bean is removed from
* session scope. Typically, this occurs as a result of
* the session timing out or being terminated by the application.</p>
* <p>You may customize this method to clean up resources allocated
* during the execution of the <code>init()</code> method, or
* at any later time during the lifetime of the application.</p>
@Override
public void destroy() {
* <p>Return a reference to the scoped data bean.</p>
* @return reference to the scoped data bean
protected ApplicationBean1 getApplicationBean1() {
return (ApplicationBean1) getBean("ApplicationBean1");
public Booking[] getBookingArray() {
List<Booking> bookingList = bookingDAO.findAll();
if (bookingList != null) {
bookingArray = bookingList.toArray(new Booking[0]);
} else {
bookingArray = null;
return bookingArray;
public Quota[] getQuotaArray() {
List<Quota> quotaList = quotaDAO.findAll();
if (quotaList != null) {
quotaArray = quotaList.toArray(new Quota[0]);
} else {
quotaArray = null;
return quotaArray;
}
Maybe you are looking for
-
Installed apps are now "waiting"
This morning, I turned on my iPad to discover that 90% (not all) of my downloaded apps are no longer useable and are noted as "waiting" and are slowly downloading. I have tried syncing to my computer to no avail. Any thoughts?
-
Order Quantity Field in Sales order
Hi All I'm creating High Sea Sales order. When i start creating sales order after punching the order quantity in screen that particular field gets greyed out. Quantity which i put in field is not getting updated . If i go to item level & update quant
-
Video clips can be added to pdf files in InDesign but I cannot find a way to access a video in youtube. Is Adobe plainning on adding this capability in the future?
-
Rfc to idoc...... how to create order
hi, i worked on rfc to idoc scenario...... using matmas idoc to create material from r/3 system to IDES system through (rfcxiidoc) scenario Now i want to do it to create an order using rfc to idoc I am not sure which IDOC structure i will use and whi
-
Opening images within Messages
Since updating my iPhone 5 to iOS 7.0.3, images do not download and open in Messages. They do work on the iPad running 7.0,3. Any suggestions?