VL02N creation of handling units

Hello,
Is it posible to create handling units manually in the delivery? If yes, what is the procedure?
Also, if handling units were done by clicking automatic packing, is it possible to edit the handling unit created? If yes, how?
Thanks

Hi
I just want to add my input...hope this may fullfill ur query...
steps:
1. crate Material Packaging type
2. Create Material Packaging group
3. AllowPackaging type into packaging group
4. assign Material Packaging group into MM02
then go to VL02N there you have handling unit icon..there u can play as much as u can depand on wt, vol.. of Materail
correct me if went wrong..
Thanks
Mahesh

Similar Messages

Creation of Handling Units at Sales Order Level

Hi Experts ,
Please let me know,how can a handling unit be created at sales order level.
Your comments will be appreciated
Regards
Albert

Hi,
In industry solution - automotive solution, this can be done by HUP12 - create planned HU's for sales order.
In generic SAP, this can not be done.
Hope this helps.
Harry

Creation of handling unit through VL01N

HI ALL,
i have a requirement like in vl01n we will give shipping point and sales order and we press enter and we will give picking quantity and we will press save button . here when ever i press save button i need delivery number with auto packing handling unit number also. how to do technically?
thanks
ram.

Hi,
In industry solution - automotive solution, this can be done by HUP12 - create planned HU's for sales order.
In generic SAP, this can not be done.
Hope this helps.
Harry

Problem in Creation of Handling Units through HU_REPACK and HU_POST FM

Hi Experts
        This is regarding the problem in creation of HUs with function modules HU_REPACK and HU_POST.
I am sending two Unique Sources HUs with single destination HU for the same material and batch into HU_REPACK and it shows that it is successfully repacked and soon as the HU_REPACK function module passess I have called HU_POST without any parameters except messages..As the data will be picked up auomatically from the internal memory as these function module are related same function group.
Even the HU_POST FM passes successfully and also it creates a Transfer order but the problem is that THe HU is created with the MULTIPLE LINE ITEMS for the same material and Batch which should not be done at all .
Please find the example of the HU created in the system
    0     10020000038479     S-DISP     1     EA          S DISPNSARY
    1     0024632192 000004     810062     0.250     KG     L0533A4172     Lactose
    1     0024632192 000004     810062     24.900     KG     L0533A4172     Lactose
Material is 810062
Batch    is L0533A4172
Can you please assist me how to acheive single line item HU when we are trying to repack the data for same material and batch as it does while you create the HU through Manual processing i.e HU02 etc

*

IDOC DELVRY03 (WHSCON) create Handling Units

Hi,
I am creating an inbound delivery from an IDoc.
I now want to have the items packed on the delivery.
Therefore the HU's need to be suitably created and packed into for the items.
From investigating, SAP states use the 'WHSCON for creation of Handling Units for deliveries'. Refer OSS note 792726.
Can somebody please point me in the correct direction for performing this.
So far all I have managed to find is that EXIDV needs to be present, which is the HU, which I do not have. Unless I am missing some fundamental point that SAP has not pointed out to me yet
As far as a BDC goes for packing, use the Single Entry tab, on VL32N anyway.
I have a BDC to do this, so can fall back to that, but it would be preferred to create the delivery and then pack it right away, whilst creating/posting the IDocs. The IDocs also provide tracking in case things go wrong, etc, hence, prefer the workflow rather than have another program to run, etc etc.
Thanks
Justin Mortlock

Hi,
Check out the qualifier in the E1EDL41 segment.
It has following qualifiers.In your IDOC you should be having 002???!!!.
If so update the mapping with the 003 qualf at the middleware/translator level.

Create Handling unit after receiving finished goods

Hello,
My client's requirement is that they do not want a TR or TO to get created at the time of Production order confirmation and neither they want to create the Handling unit at the time of confirmation.
They want to move the material from production to warehouse as one Handling unit after multiple confirmations. They want to create Handling unit manually after the receipt of materials.
What is the process of creating Handling unit after we have FG (multiple batches).
After creation of Handling units, my client wants to ship the same Handling unit out to customer.
How to create Handling unit
Regards
Prabhjot Singh

Dear
Please Follow this Steps
Process Cycle:
1)Create Material with WM View in Material Master (MM01)
2)Crearte Purchase Order(ME21N) consult MM
3)Release Purchase Order(ME29N, ME28)
4)Goods Receipts (MIGO)
5)Creating Transfer Request (note:- this will come Automatically while doing G/R)
6)Create Transfer Order (LB13)
7)Confirm Transfer Order (LT12)
10)Check Stock Overview in Warehouse (LS24)
Goods Issue Process from Warehouse:
1)Create Reservation (MB21)
2)Goods Issue W.R.T Reservation (MIGO)
3)Create Transfer Order (LT06)
4)Confirm Transfer Order (LT12)
After Doing all This Steps In MMBE At Stock Requirement List Click on the Selected Stock and Right Click u can See the WM stocks And Handling Unit
with Regards
Pushpalas

Create Handling unit after receiving finished goods from production

Hello,
My client's requirement is that they do not want a TR or TO to get created at the time of Production order confirmation and neither they want to create the Handling unit at the time of confirmation.
They want to move the material from production to warehouse as one Handling unit after multiple confirmations. They want to create Handling unit manually after the receipt of materials.
What is the process of creating Handling unit after we have FG (multiple batches).
After creation of Handling units, my client wants to ship the same Handling unit out to customer.
How to create Handling unit
Regards
Prabhjot Singh

Hi,
If I understand right - customer wants a simple transfer of finished goods from production to warehouse, and latter pack into handling units.
Possible scenario:
1) Assign production order to non-WM and non-HU storage location. Post GR for production order using transaction MIGO (mvmt. type 101) for a whole quantity produced for production order.
2) Setup packing table in IMG (Logistic General > Handling Units > General > Setup packing table> ...) --> packing table is a functionality for packing goods into HU - it takes goods from predefined source non-WM/non-HU location, packs them into HU and places them in target WM-HUM location.
2) Maintain packaging instruction (trans. POP1 and POF1) to automate the packaging quantities.
3) Run packaging table by HUPAST, select your table and pack.
4) Packed HU ends up on WM-HUM location.
This process can be done either in SAP GUI (HUPAST) or you can build it in RF transaction and run it with mobile RF scanner (ABAP development required).
Hopefully this will be of any help.
Regards, Primoz

Automatic creation of TO's for Handling Unit Inbound Delivery -del type HID

Hi Guru's,
I would like to create the putaway TO's for a Handling Unit inbound delivery automatically (delivery type HID). This means at the moment of the creation of the Inbound Delivery. The packing is also automatically done by the customizing of the delivery type. Did somebody faced this requirement before?
Thx,
Carl

I found the solution:
Choose Customizing activity Define Output Types for Inbound Delivery, and define output type WMTA. Enter the following values in the detail view of output type WMTA under General Data:
Enter an existing Access sequence. Access sequence 0001 is predefined in the standard system.
Set the indicator Access to conditions.
Set the indicator Partner-indep. output.
Save your entries.
In the menu tree, choose the entry Processing Routines in the Customizing activity Define Output Types, and enter the following values:
Choose entry 8 (special function) for the indicator Transmission Medium.
Enter RLAUTA20 in the field Program.
Enter ENTRY in the field Form Routine.
Save your entries.
Choose the Customizing activity Maintain Output Determination Procedure.
Define a procedure and enter the output type WMTA in the control view of the procedure. The procedure E10001 is predefined in the standard system.
To define a suitable condition record for inbound deliveries,
choose Logistics -> Materials Management -> Purchasing -> Master Data ->
Messages -> Inbound Delivery -> Create from the SAP menu.
Enter the output type WMTA.
Enter output medium 8 (special function) for delivery type Inbound Delivery.
Select the desired Date/Time.
Select the desired Language.
Cheers,
Carl

Printing Barcode for a 18 digit SSCC No (Handling Unit Number) thru' VL02N

Hi,
I'm trying to print a Barcode for a corresponding Handling Unit number in VL02N transaction code.
I have created a new device type by name ZBARCODE in SPAD transaction, the Device Type name is:
ZLB_ZEB and Spool Server is: fihdev02_FDV_00
In SE73, have created a new System Bar Code by name ZZEAN128 with the following parameters
00 00 10.00 CM 2.00 CM C128 000 .
In the Printer Bar Code option, ZBARCODE device type has been selected and in the Display Print Control page ZZEAN128 Bar Code, Prefix and Suffix has been assigned to the ZBARCODE Device Type.
In the copy of the LE_EAN128_SSCC00 Form I have assigned the ZZEAN128 Bar Code as a Character Format.
But, it is not printing the Barcode in the ZEBRA 110XI Printer.
How to overcome this problem.
Kindly guide me to fix it.
Thanks in advance,
-- Jessica

I have solved it myself.

Handling unit was not blocked - action cancelled VL02N

Dear All,
While pack VL02N data upload by bapi HU_PACKING_AND_UNPACKING its showing error
Handling unit was not blocked - action cancelled
Mohamed

Refer OSS Note 370195 , 331715

Which BAPI can Create handling Unit for VL02N.

Dear All,
Which BAPI can Create handling Unit for VL02N.
The Business is: VL02N, click head toolbar PACK, then call up handling Unit.
Thanks

Hi sun!
I'm facing the same requirement since three days and i'm not able to get it workin.
Did you resolve the problem and if yes which function modules did you use?
Thanks in advance!
Florian
Edited by: Florian Visintin on Sep 17, 2009 10:21 AM
Edited by: Florian Visintin on Sep 17, 2009 10:22 AM

To add already created Handling Units in VL02N

Hello Friends,
I have one requirement where in I am suppossed to insert already created Handling Units in VL02N.So, kindly please suggest any suitable FM/BAPI through which this can be done.
I have tried FM 'ws_delivery_update' but have not successed.
Thanks & Regards,
Raghavendra Kulkarni.

Hello,
Try the FM WS_DELIVERY_UPDATE_2 instead of WS_DELIVERY_UPDATE. It worked fine for me for doing Packing of HUs.
Thanks and Regards,
Venkat Phani Prasad Konduri

Creation of Production Order Handling Unit...

Hello friends,
My process is that once the production order is released. We do the packing of the material. For this we use transaction COP1 and do the packaging for a particular delivery. Now our requirement is that we want a function in background to do the packaging of all the newly released production orders.
Can you please suggest me a suitable function module to do the packaging for a production order and create a handling unit?
Points will be rewarded generously.
Regards,
Navin

co01.
Regards,
satyajit

Issue in Handling Unit creation.

Dear All,
We are using Handling Units functionality in the process order. We are doing packing after confirmation, at the time of packing system is creating HU for those quantities which were confirmed at the last operation. E.g. Confirmation quantity is 90 and order quantity is 100 then system is creating HU for 90 quantities. This is working absolutely fine.
If confirmed quantity is greater than Order quantity, then system is packing the quantities as per the order header quantity only. E g. Confirmation quantity is 110 but Order quantity is 100 then system is creating HU for the 100 quantity only. In this case system should create HU for all the confirmed quantities.
How to solve this issue. Thanks in advance.
Regards
Amit

Hello Amit,
Can you please provide the step you are doing in this process. Hope packing is being done automatically during confirmation.
Regards,
Sana

Handling Unit creation

Dear Friends,
I am able to create the Handling Units using BAPI_HU_CREATE but not able to assign the HU to delivery.
I can see the HUs are created in VEKP tables correctly.
I am using the FM 'HU_ASSIGN_HUS_TO_OBJECT' to assign this to delivery ( LIKP-VBELN ).
See the code below, in debugging all the values gets filled correctly including lt_hu_units but HUs are not assigned.
I can not see those later on in VL02 & then clicking on Pack from menu bar.
Not sure why the below FM not working correctly?
Pls. see portion of code below for your referance:
    ls_hu_units-top_hu_external = lv_hukey.
    ls_hu_units-venum              = ls_huheader-hu_id.
    ls_hu_units-rfbel                 = gs_header_details-vbeln.
    ls_hu_units-rfpos                = 10.
    APPEND ls_hu_units TO lt_hu_units.
    ls_object-object = 01.
    ls_object-objkey = gs_header_details-vbeln.
    CALL FUNCTION 'HU_ASSIGN_HUS_TO_OBJECT'
        EXPORTING
          is_object                 = ls_object
          it_handling_units      = lt_hu_units
        IT_HUM_QM              =
       IMPORTING
         et_messages             = lt_messages
My Regards,
Prashant

Hi David.
There are two areas for creating packing instructions
Packing instructions and then packing instruction determination
Transaction POF1 and POP1 (Cannot remember which is which)
You will need materials set up to represent packing items such as pallets etc, and these are then included in the packing instruction.
Config in HUM will allow you change the level of determination, plant etc
Good luck

VL02N creation of handling units

Similar Messages

Maybe you are looking for