VLD-6328 error : Use a flat file as Source in a mapping in OWB 10.2
Dear all,
I have created a simple mapping using a flat file in a remote server as a source and a simple table as a target.
When I try to validate the mapping I get the following warning:
"VLD-2398: No data file specified. Generated code will use the sampled file name and the file location xxx"
I use the version 10.2 and I cannot find "Sources" or "Targets" when I use the "Configure" options.
Any help will be appreciated
Hi all,
If you want to validate correctly this mapping you must to :
1. Right click on the mapping, then Configure
2. Right click on Sql Loader Data Files, then Create
3. Verify that the location name is correct and complete the Data File Name
4. OK
The validation is now OK.
I hope it will be help you
Best Regards
Samy
Similar Messages
-
How to Use Flat File As source in operation mapping?
Hi dont want to use an FCC. I have written an JAVA Mapping to convert a flat file to XML.
But in Interface Mapping How i can test this?/*This java mapping will give same output as input payload */
package com.mapping;
import java.io.InputStream;
import java.io.OutputStream;
import com.sap.aii.mapping.api.AbstractTransformation;
import com.sap.aii.mapping.api.StreamTransformationException;
import com.sap.aii.mapping.api.TransformationInput;
import com.sap.aii.mapping.api.TransformationOutput;
public class Java_Mapping extends AbstractTransformation {
public void transform(TransformationInput transformationInput,
TransformationOutput transformationOutput)
throws StreamTransformationException {
try {
InputStream inputstream = transformationInput.getInputPayload()
.getInputStream();
OutputStream outputstream = transformationOutput.getOutputPayload()
.getOutputStream();
byte[] b = new byte[inputstream.available()];
inputstream.read(b);
String strContent = new String(b);
outputstream.write(strContent.getBytes());
} catch (Exception exception) {
exception.printStackTrace();
Edited by: Raghu Vamsee on Jan 5, 2011 3:46 PM -
Hierarchy using a flat file for a master data load.
Can anyone please tell me the steps involved in creating a hierarchy in BI 7.0. and loading the data using a flat file into the created hierarchy? I have seen some posts and weblogs but they were not helpful and i have been getting some errors which i dont know how to resolve.
Can someone please give a clear steps and procedure for this?
Thanks a lot in advance.
NaveenHi,
The flat file is generated in application server by executing an ABAP program in SE38.
This ABAP program contains the logic to generate hierarchy.
In our case we used a DSO to store employee & supervisors.
This program generated a flat file in tmp folder in application server
In our case, To load this flat file we created an Infosource on our master data using direct update using RSA1old Tcode
after Infosource is created right click on the InfoSource and click on Assign DataSource.
Give the Source System name
When you open this Info source you can select data source as YHIEROBJ_HIER and then activate the InfoSource.
create an Info Package to load the Hierarchy. Right click on the PC Files (Source System) and click on u201CCreate InfoPackage".
Under Extraction tab give the flat file name which is generated by the ABAP program in AL11.
Select the hierarchy which you want to load. Also, you can rename the Hierarchy after loading it. The update method is selected as u201CFull Updateu201D.
Logic for Generation of flat file & ABAP Program:
Flat file structure:
Node ID InfoObject NodeName Parent ID Date To Date From Language
u2022 u201CNode IDu201D indicates the unique number which defines the Node.
u2022 u201CInfoObject u201Cgives the name of the InfoObject which is assigned to this Node ID.
u2022 u201CNodeNameu201D is the name you specify to that Node.
u2022 u201CParent IDu201D is the Node ID to which the Current Node ID reports to.
u2022 u201CDate Tou201D and u201CDate Fromu201D are taken for time references (You can set them constant).
u2022 u201CLanguageu201C is set to English (E).
The program Logic can be :
Declare the hierarchy structure
Get the data from DSO into internal table
Read all the EMP values into NodeName Field of the table
Build lookup table for Parent Node ID
Fill Parent Node ID field
Append this data to work area & then to another internal table
You need to declare the selection parameter as SSFILE1
& use following code to write back the file
OPEN DATASET SSFILE1 FOR OUTPUT IN TEXT MODE ENCODING DEFAULT
MESSAGE MSG.
IF SY-SUBRC NE 0.
MESSAGE E008(ZBW1) WITH MSG.
ENDIF
Populate the output from that internal table into final work area.
Transfer this final work area to the ssfile1 which is the desired output file.
and CLOSE DATASET SSFILE1.
When this program is executed, selection screen asks for the name of file
Enter the desired file name & execute
flat file would be generated in the Application server now.
To view the File, Go to Transaction AL11. Search the directory /tmp. Double click on this directory.
This opens the list of flat files under this directory. Double click on the file name.
Hope this helps.
Thanks,
Rashmi. -
Getting error while loading Flat File
Hello All,
I am getting error while loading flat file. Flat file is a CSV file.
Value ',,,,,,,,' of characteristic 0DATE is not a number with 000008 spaces
Data seprator |
Escape sign ;
It has 23708 entries , it s loading successfully till 23 665 entries
Besides when checked in PSA
for record having entries >23667 has calender day as ,,,,,, where as rest entries are having date
Besides when i checked in Flat file ,the total number of rows is 23,667 is there but i wonder why it has got 23,708 in
RSMO
Could you please let me know how to correct.
regards
pathHi,
For date column you should maintain YYYYMMDD formate Eg: 20090601, kepp cursor on date column and right click and Formate >Custome>make it 00000000 then save teh file as .CSV . First type values on column and do like this formate and save it and without opening it load it. Once you open it you losw 00000000 formate you need to give again the same formate.
Settings in Infopackage:
Data Format = CSV
Data Separator = ,
Escape Sign = ;
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/01ed2fe3811a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6567e07211d2acb80000e829fbfe/content.htm
Thanks
Reddy -
Error in InfoPackage: Error when uploading Flat Files
Hello Experts,
I encoutered this error in Info Package when uploading a flat file.
When i try to click on the "Preview" button, this errors appear:
"Error 8 when compiling the upload program: Row
237, message: Data Type / BIC/ CCCBMA1_COCTR2 was found in a newer"
Please help to advise what is this error about and how to resolve this?hi Annie,
run RSA1 and try again
Error when compiling the upload program (Message no. RSAR233)
other similar problem solved by run program(SE38)RS_TRANSTRU_ACTIVATE_ALL and relogon
A newer version of the data type error when loading
Flat File Preview error message
Error when loading from Flat File
Error message when previewing data in InfoPackage
hope this helps. -
Hello Everyone !
What is the use of Flat files, how to use and test the same.
Is there documentation available ?
Thanks.Hi,
A flat file is a file containing records that have no structured interrelationship. may be simple text file.
Following are documents:
[Advanced Flat File to MII XML Document Custom Action Blocks(v12.0)|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30472799-604b-2b10-d4bf-d7498b027674?quicklink=index&overridelayout=true]
[Flat File Parcer|http://help.sap.com/saphelp_mii121/helpdata/EN/44/710b219ea03abee10000000a155369/content.htm]
Hope this helps !!
Regards,
Manoj Bilthare -
Flat file as targets in a mapping.
Hi All,
While reading on-line documentation in topic Define Mappings of oracle9i warehouse builder i came across following statement.
"A mapping can contain up to 50 flat files as targets, and it can also contain mix of flat files, relational objects and transformations."
Does this mean a flat file can be used as target in a mapping? I am in impression that only flat file can be used as source in a mapping.
Thanks in Advance.
Regards,
VidyanandHi Igor,
Some update on this, I managed to find steps to include flat file as target in a mapping.
Steps followed were as follows.
1> Created a File Module.
2> Imported a Text File with headings and no records.
3> Created a Warehouse Module.
4> Imported scott.dept table into the module.
5> Created a mapping, mapped scott.dept table to the text file.
6> Selected Configure option in the mapping. Set parameters Thefilename = the above file name and Access Specification).
7> Validated & Generated map, it looks fine with no errors.
8> Deployed & run the package.Deployment didn't show any errors however while running displays error ORA-01403: no data found.
Please note that the utl_file_dir parameter is set on oracle server and the utl_file_dir is mapped in windows NT explorer from machine.
Does anyone knows more about this error?
Thanks in Advance.
Regards,
Vidyanand -
Flat File as Source in OWB Mapping.
Hi All,
Configuration Details is as follows:
Oracle 9i Warehouse Builder Client: 9.2.0.2.8
Oracle 9i Warehouse Builder Repository: 9.2.0.2.0
Windows XP Professional
I developed a mapping which involves a flat file as source & Oracle Table as target steps followed were as follows.
1. Created Flat File module, selected Connector & Location Details.
2. Done mapping for source file & target table.
3. Validated & Generated the mappings.
4. Deployed the mapping in Deployment Manager.
5. Following was Error Message after execution of the mapping.
Completion Status: Completed with errors.
Meesage Log: Starting Execution of VHM_MAP2. Starting Task VHM_MAP2. RPE-01013:SQL Loader reported error condition,number 4. Completing Task VHM_MAP2.
Following was Control File generated by the above mapping.
OPTIONS ( ERRORS=50, BINDSIZE=50000, ROWS=200, READSIZE=65536)
LOAD DATA
CHARACTERSET WE8MSWIN1252
INFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.txt'
BADFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.bad'
DISCARDFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.discard'
INTO TABLE "{{TARGET_LOCATION.Schema}}"."DEPT"
APPEND
REENABLE DISABLED_CONSTRAINTS
FIELDS
TERMINATED BY ','
OPTIONALLY ENCLOSED BY '"'
"DEPTNO" POSITION (1) INTEGER EXTERNAL ,
"DNAME" CHAR ,
"LOC" CHAR
Please note that no message is displayed in Row Activity & output parameters in Deployment Manager.
I worked on lower version of the OWB & in that version there was no concept of Location, Connector, Deployment Manager.
Not sure why the above mapping is failing?
Also I would like to know where can I get more information about the mapping errors which are different from oracle error messages.
e.g. In above case error message is RPE-01013: SQL Loader reported error condition, number 4 .
Thanks in Advance.
Regards,
VidyanandHi
I'm using single host implementation OWB10g/Oracle on same host.
My flat file location is
c:\source\dept.txt
Pl tell me if I have to save the same file on any particular location for OWB to read.
Implementation in OWB10g
1. Created Flat File module, selected Connector & Location Details.
2. Done mapping for source file & target table.
3. Validated & Generated the mappings.
4. Deployed the mapping in Deployment Manager.
5. Following was Error Message after execution of the mapping.
Can not read data from file
c:\souredept.txt
OPTIONS ( ERRORS=50, BINDSIZE=50000, ROWS=200, READSIZE=65536)
LOAD DATA
CHARACTERSET WE8MSWIN1252
INFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.txt'
BADFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.bad'
DISCARDFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.discard'
INTO TABLE "{{TARGET_LOCATION.Schema}}"."DEPT"
APPEND
REENABLE DISABLED_CONSTRAINTS
FIELDS
TERMINATED BY ','
OPTIONALLY ENCLOSED BY '"'
"DEPTNO" POSITION (1) INTEGER EXTERNAL ,
"DNAME" CHAR ,
"LOC" CHAR
Thx in advance -
Working with flat file as source in owb 10.2
Hi,
I am working with flat file as source . While validating the mapping i am getting the following error like
" to specify a data file configure the mapping , add a node under ' Source data file', type in the file name
and select the file location."
Please give me the suggestion . It is very urgent.Hi Venkat,
I tried the following stepts.
1. in Design Center select your mapping and right click and select configure
2. select sql loader data files and select create
3. On right hand side data file Name : enter your source file name (ex : source.csv)
4. click ok button.
5. open mapping and validate.
The mapping is validating. After validating I deployed the mapping. Up to this the mapping is working fine.
But when I start the mapping, It has completed with errors.
The error message is:
Status
Error Log
RPE-01013: SQL Loader reported error condition, number 1.
LRM-00112: multiple values not allowed for parameter 'control'
Job Summary
Updated : 2009-02-24 15:32:43.0 Job Final Status : Completed with errors Job Processed Count : 1 Job Error Count : 1 Job Warning Count : 0
Please give me the suggestions.
Thanks,
Venkat -
Flat file data Source creation in BI7
Hi ,
I am trying to create flat file data source in BI7 to load master data.
Aftre i enter all the details,while activating its giving me error like this
Runtime Errors DATA_LENGTH_NEGATIVE
Except. CX_SY_RANGE_OUT_OF_BOUNDS
Can anyone suggest me abt this.
Thanks
ThiruHi,
In the datasource def go to the fields tab. Here check the values for the length og the field.
Check whether all the values are within 60
Regds,
Shashank -
Urgent: Transport of Flat File Data Source
While transporting flat file data source is it required to transport first in a separate request or everything can go in 1 request.
Thank you,
samHi,
In this case it can go in one request as no replication is needed. But for other datasources, you need to send the datasources first in a separate request and then replicate the datasource in BW before you send the BW changes.
Cheers,
Kedar -
Error while loading flat file into DSO
Hi
I am loading data from a flat file into a DSO. My fields in the flat file are Trans_Dt, (CHAR) Particulars (CHAR), Card_Name, (CHAR) Exps_Type, (CHAR)
Debit_Amount,Credit_Amount,***._Amt,Open_Bal_Check_Acnt, (CURR)
0Currency (CHAR)
In the proposal tab apart from the above mentioned fields 3 additional fields viz, field 10, field 11, and field 12 have come. How did these 3 additional fields come when I don't have any additional fields in my flat file? I've deleted these extra 3 fields though.
When I activate the DataSource it is getting activated but then I get the message 'Data structures were changed. Start transactions before hand'. What does this message mean?
When I hit the 'Read preview data' button it doesn't show me any data and gives me the error Missing reference to currency field / unit field for the fields Debit_Amount,Credit_Amount,***._Amt,Open_Bal_Check_Acnt
How do I create a reference field to the above mentioned fields?
Earlier I didn't have the 0Currency field in the flat file. But in my DSO while creating the key figures by default the 0Currency field also got created which is quite obvious. Now while activating the transformations I was getting a message that 'No source field for the field 0Currency'. Hence I had to create a new field in my flat file called 0Currency and load it with USD in all rows.
Please help me in loading this flat file into the DSO.
Thank you.
TR.Hi guys,
Thanks a lot for your answers. with your help I could see the data in the 'Read preview data' and schedule the load. I did use all the Info objects in the info objects column of the data source to load the flat file.
The data is in PSA successfully without any issues. but when I executed the DTP it failed with errors.
Earlier there was no mapping from Currency field in source to the all the key figure fields in the target in the transformation. The mapping was only from Currency to 0CURRENCY but still the transformation got activated. As per your advise I mapped Currency field to the remaining Key Figure fields but then I am getting the error
'Source parameter CURRENCY is not being used'
Why is that so?
list of Errors after executing the DTP:
1. 'Record filtered because records with the same key contain errors'
Message:
Diagnosis: The data record was filtered out becoz data records with the same key have already been filtered out in the current step for other reasons and the current update is non-commutative (for example, MOVE). This means that data records cannot be exchanged on the basis of the semantic key.
System Response: The data record is filtered out; further processing is performed in accordance with the settings chosen for error handling.
Procedure: Check these data records and data records with the same key for errors and then update them.
Procedure for System administration
Can you please explain this error and how should I fix this error.
2. Exception input_not_numeric; see long text - ID RSTRAN
Diagnosis: An exception input_not_numeric was raised while executing function module RST_TOBJ_TO_DERIVED_TOBJ.
System Response
Processing the corresponding record has been terminated.
Procedure
To analyse the cause, set a break point in the program of the transformation at the call point of function module RST_TOBJ_TO_DERIVED_TOBJ. Simulate the data transfer process to investigate the cause.
Procedure for System Administration
What does this error mean? How do I set a breakpoint in the program to fix this error inorder to load the data?
What does Procedure for System Administration mean?
Please advise.
Thank you.
TR. -
Error while loading Flat file to the table (ORA-00936: missing expression)
lat file Hi Gurus
Receiving the following error while trying to load of flat file to the database :
ODI-1228: Task test_file_load (Integration) fails on the target ORACLE connection DEMO_STAGE.
Caused By: java.sql.SQLSyntaxErrorException: ORA-00936: missing expression
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1079)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3937)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1535)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
The file which I have tried to load is : SRC_SALES_PERSON and teh table structure is
CREATE table "TRG_SALES_PERSON"(
"SALES_PERSON_ID" NUMBER(8,0) NOT NULL,
"FIRST_NAME" VARCHAR2(80),
"LAST_NAME" VARCHAR2(80),
"DATE_HIRED" VARCHAR2(80),
"DATE_UPDATED" DATE NOT NULL)
Knowledge module used are
LKM File to SQL
IKM SQL Incremental Update
We rae using ODI 11g R2 ...
Thanks and reallty appreciate any help in thsi regard.HI there,
I am facing the same issue while loading data from SRC_SALES_PERSON(flat file) to TRG_CUSTOMER.
I dont see any errors in the steps however the data is not laoded finally. Here are the sql commands
**On source**
select ID C11_ID,
LASTNAME C9_LASTNAME
from TABLE
/*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=SRC_SALES_PERSONSNP$CRLOAD_FILE=D:\Pratima\Softwares\ODI\ofm_odi_companion_generic_11.1.1.5.1_disk1_1of1[1]\demo\oracledi-demo\oracledi\demo\file/SRC_SALES_PERSON.txtSNP$CRFILE_FORMAT=FSNP$CRFILE_SEP_FIELD=0x0009SNP$CRFILE_SEP_LINE=0x000D0x000ASNP$CRFILE_FIRST_ROW=0SNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=IDSNP$CRTYPE_NAME=STRINGSNP$CRORDER=1SNP$CRLINE_OFFSET=1SNP$CRLENGTH=11SNP$CRPRECISION=11SNP$CRACTION_ON_ERROR=0SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=FIRSTNAMESNP$CRTYPE_NAME=STRINGSNP$CRLINE_OFFSET=12SNP$CRLENGTH=50SNP$CRPRECISION=50SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=LASTNAMESNP$CRTYPE_NAME=STRINGSNP$CRLINE_OFFSET=62SNP$CRLENGTH=50SNP$CRPRECISION=50SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=DATE1SNP$CRTYPE_NAME=STRINGSNP$CRLINE_OFFSET=112SNP$CRLENGTH=20SNP$CRPRECISION=20SNP$CR$$SNPS_END_KEY*/
On Target
insert into STAGING.C$_0TRG_CUSTOMER
C11_ID,
C9_LASTNAME
values
:C11_ID,
:C9_LASTNAME
The actual code at source fails however the step is in green.
Thanks in Advance,
Pratima -
Error in Performing Flat-File Reconciliation
Hi All,
I was trying perform flat file reconcilation using the GTC Connector. The format of my flat file (PPSLocal.txt) is like this:
Account Name|Full Name|Domain|Last Logon Timestamp|Description|GUID|Mail|Employee ID|First Name|Last Name
PPS\SophosSAUPPS010|SophosSAUPPS010|PPS.LOCAL||Used for download of Sophos updates|EED86D86-750C-404A-9326-044A4DB07477||||
PPS\GBPPL-SI08$|GBPPL-SI08$|PPS.LOCAL|||79677F4D-8959-493E-9CF9-CDDDB175E40B||||
PPS\S6Services|Series 6 Services Account|PPS.LOCAL||Series 6 Services Account|B4F41EE2-6744-4064-95F6-74E017D0B9AF||||
I created a GTC Connector "OtherDomain" specified all the configuration;
Staging Directory (Parent identity data) /home/GTC
Archiving Directory /home/GTC/archive
File Prefix PPS
Specified Delimiter |
File Encoding UTF8
Source Date Format yyyy/MM/dd hh:mm:ss z
Reconcile Deletion of Multivalued Attribute Data check box unchecked
Reconciliation Type Full
After that i performed the connector configuration mapping and ran the respective schedule task which displayed the following error message on console:
Class/Medthod: SharedDriveReconTransportProvider/getFirstPage - Before calling: getAllData
*DEBUG,20 Aug 2009 09:08:49,202,[XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT],Class/Method: SharedDriveReconTransportProvider/getAllData entered.*
*DEBUG,20 Aug 2009 09:08:49,202,[XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT],Class/Method: SharedDriveReconTransportProvider/getReconFileList entered.*
*DEBUG,20 Aug 2009 09:08:49,202,[XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT],Class/Method: SharedDriveReconTransportProvider.EndsWithFilter/accept entered.*
*INFO,20 Aug 2009 09:08:49,202,[XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT],Staging dir -->/home/GTC*
*INFO,20 Aug 2009 09:08:49,202,[XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT],Number of files available -->0*
*DEBUG,20 Aug 2009 09:08:49,202,[XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT],Class/Method: SharedDriveReconTransportProvider/getReconFileList left.*
*ERROR,20 Aug 2009 09:08:49,202,[XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT],Problem encountered in reconciling the first page of data*
com.thortech.xl.gc.exception.ReconciliationTransportException: No Parent files in staging directory or necassary access(READ) permissions are missing
* at com.thortech.xl.gc.impl.recon.SharedDriveReconTransportProvider.getAllData(Unknown Source)*
* at com.thortech.xl.gc.impl.recon.SharedDriveReconTransportProvider.getFirstPage(Unknown Source)*
* at com.thortech.xl.gc.runtime.GCScheduleTask.execute(Unknown Source)*
* at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)*
* at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)*
* at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)*
* at weblogic.security.service.SecurityManager.runAs(Unknown Source)*
* at weblogic.security.Security.runAs(Security.java:41)*
* at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)*
* at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)*
* at org.quartz.core.JobRunShell.run(JobRunShell.java:178)*
* at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:477)*
*ERROR,20 Aug 2009 09:08:49,202,[XELLERATE.GC.FRAMEWORKRECONCILIATION],Reconciliation Encountered error:*
com.thortech.xl.gc.exception.ProviderException: No Parent files in staging directory or necassary access(READ) permissions are missing
* at com.thortech.xl.gc.impl.recon.SharedDriveReconTransportProvider.getFirstPage(Unknown Source)*
* at com.thortech.xl.gc.runtime.GCScheduleTask.execute(Unknown Source)*
* at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)*
* at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)*
* at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)*
* at weblogic.security.service.SecurityManager.runAs(Unknown Source)*
* at weblogic.security.Security.runAs(Security.java:41)*
* at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)*
* at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)*
* at org.quartz.core.JobRunShell.run(JobRunShell.java:178)*
* at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:477)*
Caused by: com.thortech.xl.gc.exception.ReconciliationTransportException: No Parent files in staging directory or necassary access(READ) permissions are missing
* at com.thortech.xl.gc.impl.recon.SharedDriveReconTransportProvider.getAllData(Unknown Source)*
* ... 11 more*
*WARN,20 Aug 2009 09:08:49,203,[XELLERATE.GC.FRAMEWORKRECONCILIATION],Though Reconciliation Scheduled task has encountered an error, Reconciliation Transport providers have been "ended" smoothly. Any provider operation that occurs during that "end" or "clean-up" phase would have been executed e.g. Data archival. In case you want that data to be a part of next Reconciliation execution, restore it from Staging. Provider logs must be containing details about storage entities that would have been archived*
*DEBUG,20 Aug 2009 09:08:49,203,[XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT],Class/Method: SharedDriveReconTransportProvider/end entered.*
*DEBUG,20 Aug 2009 09:08:49,203,[XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT],Class/Medthod: SharedDriveReconTransportProvider/end - After calling: Re-setting instance variables*
*DEBUG,20 Aug 2009 09:08:49,203,[XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT],Class/Medthod: SharedDriveReconTransportProvider/end - After calling: Re-set over for instance variables*
*DEBUG,20 Aug 2009 09:08:49,203,[XELLERATE.GC.PROVIDER.RECONCILIATIONTRANSPORT],Class/Method: SharedDriveReconTransportProvider/end left.*
*DEBUG,20 Aug 2009 09:08:49,203,[XELLERATE.SCHEDULER.TASK],Class/Method: SchedulerBaseTask/run left.*
*DEBUG,20 Aug 2009 09:08:49,203,[XELLERATE.SCHEDULER.TASK],Class/Method: SchedulerBaseTask/isSuccess entered.*
*DEBUG,20 Aug 2009 09:08:49,203,[XELLERATE.SCHEDULER.TASK],Class/Method: SchedulerBaseTask/isSuccess left.*
*DEBUG,20 Aug 2009 09:08:49,203,[XELLERATE.SERVER],Class/Method: SchedulerTaskLocater /removeLocalTask entered.*
*DEBUG,20 Aug 2009 09:08:49,203,[XELLERATE.SERVER],Class/Method: SchedulerTaskLocater /removeLocalTask left.*
*DEBUG,20 Aug 2009 09:08:49,203,[XELLERATE.SERVER],Class/Method: QuartzWrapper/updateStatusToInactive entered.*
*DEBUG,20 Aug 2009 09:08:49,207,[XELLERATE.SERVER],Class/Method: QuartzWrapper/updateStatusToInactive left.*
*DEBUG,20 Aug 2009 09:08:49,207,[XELLERATE.SERVER],Class/Method: QuartzWrapper/updateTaskHistory entered.*
*DEBUG,20 Aug 2009 09:08:49,208,[XELLERATE.SERVER],Class/Method: QuartzWrapper/updateTaskHistory left.*
*DEBUG,20 Aug 2009 09:08:49,209,[XELLERATE.SERVER],Clearing Security Associations with thread executing Scheduled task*
*DEBUG,20 Aug 2009 09:08:49,210,[XELLERATE.SERVER],Class/Method: QuartzWrapper/run left.*
*DEBUG,20 Aug 2009 09:08:49,210,[XELLERATE.SERVER],Class/Method: QuartzWrapper/execute left.*
However, to my amazement, the reconciliation event for all the user are getting created in OIM Design console;
I have tried changing the directory /home/GTC permission to 777 also but it didnt help.
If anyone has any clue on this, kindly help.
Cheers,
SunnyAS you are saying that fiel is there.
Can you please tell me how your recon sch task is running, I mean to say at what interval or once or daily ?
If you are putting your file in parent form it is going to archive after recon. that';s correct and your recon manager is getting users that is also correct it means your recon si working fine.
Now to run this recon second time you have to put one more fiel with new records or updated records in the parent dir otherwise it shows error.
For me it is not showing any error.
As user774847 is saying that it is known issue, i can't comment on this as I am not getting this error. I get this error only when i don't put any flat file in parent dir and i run the sch task.
Just put new file or updated one for each time you run the SCh Task and make the SCh Task ONCE or Daily.
Let me know if errors are still coming -
Flat file as source and target in owb-error
hi,
I want to run an interface with source as flat file and target as rdbms table.
The mapping got deployed with warnings.
And when i run the mapping i get the below error.
ORA-04063: package body "Schema.project_name" has errors
ORA-06508: PL/SQL: could not find program unit being called: "schema.project_name"
ORA-06512: at line 1Hi
There's nothing wrong with your theory, however you might get a DB lock depending on the locking strategy of your RDBMS and it's current configuration.
Now, assuming that DB locking is your issue (get a DBA to check when the dataflow stalls), there are 2 solutions.
1, change the DB lock settings
2, take a copy of the target table in a new dataflow and use that as the source in the orginal dataflow.
Michael
Maybe you are looking for
-
Multiple devices cannot connect
I can not connect multiple devices (iphone, windows laptop) wirelessly. I have an airport extreme, Imac operating on SnowLeopard. My Ipad and macpro connects fine wirelessly. This is a new problem. Worked fine for 6 months. I have rebooted both the
-
How to change the fontcolor of a DefaultMutableTreeNode on click of it?
I am having a JTree which is dynamically generated , I want to set the foreground color of a node when i click it and the foreground color should be maintained permanently even if i click the next node, The idea is this the color of all the clicked n
-
Probelm while installing windows 7 on MacBook pro through bootcamp? I am getting a black screen during installation
-
Smart form- How to apply page break after every 5 entries in main window?
How do i make sure that only 5 line items are displayed per page in main window of my smart form. After 5 line items, the remaining lines should be printed in the next page
-
Jet Pack ussage overages due to equipment failure, where to get help?
During the month of May, I received alerts that my data usage on my jet-pack was exceeding our usage plan. This is highly unusual for my husband and I as we simply use the Jet Pack for internet (it's not connected to our television or any kind of hom