VM server Configuration.

Hi,
I m configuring Oracle VM server at my workplace.
I need to virtualise 20 machines on one VM Server.IP addresses of Machine starts from 10.180.45.1-10.180.45.20.
Considering the future need if i need to add a new machine having different ip say.202.180.45.1.How would i go about configuring the nic card for the server.
How would i go about it.

Dear Herb,
Thanks for ur prompt response.
I do have multiple nic cards in the server. I have heard that this can be done by concept called bridging / trunking. No idea which is preferrable in this case.
Either case is there any doc or link which would guide me in the easiest way to do the same.
Do I need to do configuration on switch side too?
Thanks...

Similar Messages

WIndows 7 64-bit system printing to a Windows 2000 server configured as a print server

Is there any way to configure a new Windows 7 64-bit computer to use a Windows 2000 server configured as a print server ?
The printer that I would like to connect to is an HP 4240n LaserJet. I appears that there is only a 64-bit Universal Print Driver available. The server currently uses HP 32-bit PCL5e or PCL6 drivers for all other connected computers. Connection is through a Hewlett-Packard Network Port, using DLC/LLC transport for the embedded 4240n print server.
Installing the HP 64-bit UPD to the WIndows 7 64-bit system, and then attempting to redirect the local port to the Win2k network print server has not worked.
Thanks for any advice.

Hi:
See if this works...
Run msconfig.
In the System Configuration screen, Boot tab, Advanced Options, if there is a check mark in the box next to Maximum memory. Remove that checkmark and save your changes.
Reboot and hopefully Windows recognises all the Ram ( minus the reserved ) after restarting.
Please give that a try, and post back and let us know if that frees up some system memory for you.
Paul

Printer Server configuration for APEX 3.1.2 in 10g XE

I have APEX3.1.2 installed in 10g XE and I am going thorough the OTN tutorial "[Oracle Application Express 3.0-- Building a Functional Application"|http://www.oracle.com/technology/obe/apex/obe30/apexdev30.htm#l7] in the section "Editing Application Objects".
When I click "Print Attribute" of a page region, it displayed "{color:#ff0000}Report printing is currently not available, there is no print server configured{color}".
Can you tell me what this means and how to resolve it. All I have is APEX3.1.2 installed in 10gXE.
I have searched this forum and it seems that I have to install/configure a printer server?
Thanks!
Kevin

Dan,
I have the same problem as Kevin.
Your answer to his question can be very helpful. But if I follow the link you provide, I cant find the step 5.2.
Step 5.1 is clear. But what are the tasks of step 5.2?
I hope that you can tell me this.
Thank you.
Carlos

Service Manager Data Warehouse Install - Analysis Server Configuration For OLAP Cubes Fail

Hello everyone,
I have an issue with my installation of the Data Warehouse for System Center Service Manager 2012 SP1.
My install environment is the following:
Windows Server 2012 – System Center Service Manager (Successfully Installed) - Virtual
Windows Server 2012 – System Center Data Warehouse (Pending) - Virtual
Windows Server 2012 – MS SQL Server 2012 – Physical, Clustered 1<sup>st</sup> of Four Servers
The SQL Server is a clustered installation with named instances, specifically for SharePoint and Service Manager. Each instance has its own IP address and dynamic ports are turned off. I’m installing using the domain administrator account and I also chose
to run the installer as administrator. The domain admin has sysadmin rights to the service manager server and instance I’m trying to install on. However, the account does not have sysadmin rights to some of the other instances.
The install is smooth up until it needs to connect to the Analysis server database. I have tried connecting to the analysis servers on other SQL servers on site and all were successful. The only difference between the older SQL servers, the SQL 2012 development
server and the SQL 2012 Production server I’m trying to install to is that the that the domain admin account doesn’t have sysadmin access on all the databases on the new production server. The SQL server is being installed and configured by a contractor so
if you all have troubleshooting suggestions, I’ll need to coordinate with the contractor.
Starting with the screen below, I began searching for help online. There seems to be no one else with this issue or it is not documented properly. I opened a ticket with MS, called the contractor and troubleshot with him, troubleshot as far as I could on
my own and I’m still at a loss as to what is preventing the installer from connecting specifically to the analysis server.
I first thought the installer was at issue or that the data warehouse sever was at issue. But all signs are pointing at the SQL server. The installer is able to connect to all the other SQL servers – including other 2012 servers (same versions) – so it can’t
be the installer. I’m pretty sure the SQL server is going to be at issue.
After looking at this error, I opened the resource monitor and clicked the dropdown to see if it was trying to connect to the correct server and it was. I then connected to the old and new test and development servers successfully. Then connected to the
SQL 2008 R2 production cluster successfully. I then compared the two servers. The only difference other than the version numbers is that the admin account doesn’t have sysadmin rights on all the SQL 2012 database servers. But the database servers are not the
problem. The analysis servers are.
I then checked the event logs and they are empty as far as this issue is concerned. Actually, there are no errors on the SQL 2012 production box and the Data Warehouse box. I then checked the log that the installer creates during every step of the installation
and this is what is created when the dropdown is clicked for the analysis server configuration screen. The log file location is:
“C:\Users\admin\AppData\Local\Temp\2\SCSMSetupWizard01.txt”
In the file is the following text.
01:03:34:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012
01:03:34:Using SQL Server 2012 management scope on SCSMSQL2012
01:03:36:Collecting SQL instances on server SCSMSQL2012
01:03:36:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:36:Using SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:38:Found SQL Instance: SCSMSQL2012\PWGSQL2012
01:03:38:Found SQL Instance: SCSMSQL2012\SCSMSQL2012
01:03:39:Error:GetSqlInstanceList(), Exception Type: Microsoft.AnalysisServices.ConnectionException, Exception Message: A connection cannot be made. Ensure that the server is running.
01:03:39:StackTrace:   at Microsoft.AnalysisServices.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenConnection(ConnectionInfo connectionInfo, Boolean& isSessionTokenNeeded)
   at Microsoft.AnalysisServices.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
   at Microsoft.AnalysisServices.Server.Connect(String connectionString, String sessionId, ObjectExpansion expansionType)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetASVersion(StringBuilder sqlInstanceServiceName)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetSqlInstanceList(String sqlServerName, Int32 serviceType)
I’m now investigating the issue according to this output, and decided to ask you all if you’ve run into this issue and found a resolution.

I am running into same issue . But I don't anything in the instances section related to portipv6 . I do see in the listener section , I tried to remove it . But it comes up again . Please help
<ConfigurationSettings>
<Security>
<RequireClientAuthentication>0</RequireClientAuthentication>
<SecurityPackageList/>
</Security>
<Network>
<Listener>
<RequestSizeThreshold>4095</RequestSizeThreshold>
<MaxAllowedRequestSize>0</MaxAllowedRequestSize>
<ServerSendTimeout>60000</ServerSendTimeout>
<ServerReceiveTimeout>60000</ServerReceiveTimeout>
<IPV4Support>2</IPV4Support>
<IPV6Support>2</IPV6Support>
</Listener>
<TCP>
<MaxPendingSendCount>12</MaxPendingSendCount>
<MaxPendingReceiveCount>4</MaxPendingReceiveCount>
<MinPendingReceiveCount>2</MinPendingReceiveCount>
<MaxCompletedReceiveCount>9</MaxCompletedReceiveCount>
<ScatterReceiveMultiplier>5</ScatterReceiveMultiplier>
<MaxPendingAcceptExCount>10</MaxPendingAcceptExCount>
<MinPendingAcceptExCount>2</MinPendingAcceptExCount>
<InitialConnectTimeout>10</InitialConnectTimeout>
<SocketOptions>
<SendBufferSize>0</SendBufferSize>
<ReceiveBufferSize>0</ReceiveBufferSize>
<DisableNonblockingMode>1</DisableNonblockingMode>
<EnableNagleAlgorithm>0</EnableNagleAlgorithm>
<EnableLingerOnClose>0</EnableLingerOnClose>
<LingerTimeout>0</LingerTimeout>
</SocketOptions>
</TCP>
<Requests>
<EnableBinaryXML>0</EnableBinaryXML>
<EnableCompression>0</EnableCompression>
</Requests>
<Responses>
<EnableBinaryXML>1</EnableBinaryXML>
<EnableCompression>1</EnableCompression>
<CompressionLevel>9</CompressionLevel>
</Responses>
<ListenOnlyOnLocalConnections>0</ListenOnlyOnLocalConnections>
</Network>
<Log>
<File>msmdredir.log</File>
<FileBufferSize>0</FileBufferSize>
<MessageLogs>Console;System</MessageLogs>
<Exception>
<CreateAndSendCrashReports>0</CreateAndSendCrashReports>
<CrashReportsFolder/>
<SQLDumperFlagsOn>0x0</SQLDumperFlagsOn>
<SQLDumperFlagsOff>0x0</SQLDumperFlagsOff>
<MiniDumpFlagsOn>0x0</MiniDumpFlagsOn>
<MiniDumpFlagsOff>0x0</MiniDumpFlagsOff>
<MinidumpErrorList>0xC1000000, 0xC1000001, 0xC100000C, 0xC1000016, 0xC1360054, 0xC1360055</MinidumpErrorList>
<ExceptionHandlingMode>0</ExceptionHandlingMode>
<MaxExceptions>500</MaxExceptions>
<MaxDuplicateDumps>1</MaxDuplicateDumps>
</Exception>
</Log>
<Memory>
<HandleIA64AlignmentFaults>0</HandleIA64AlignmentFaults>
<PreAllocate>0</PreAllocate>
<VertiPaqPagingPolicy>0</VertiPaqPagingPolicy>
<PagePoolRestrictNumaNode>0</PagePoolRestrictNumaNode>
</Memory>
<Instances/>
<VertiPaq>
<DefaultSegmentRowCount>0</DefaultSegmentRowCount>
<ProcessingTimeboxSecPerMRow>-1</ProcessingTimeboxSecPerMRow>
<SEQueryRegistry>
<Size>0</Size>
<MinKCycles>0</MinKCycles>
<MinCyclesPerRow>0</MinCyclesPerRow>
<MaxArbShpSize>0</MaxArbShpSize>
</SEQueryRegistry>
</VertiPaq>
</ConfigurationSettings>

OIM 11g Server Configuration Wizard Error - Cannot Connect to Oracle DB

I appreciate any and all suggestions or thoughts on how to best continue troubleshooting this error that I am describing below.
I am attempting to install Oracle Identity and Access Management Suite 11g on a Windows 7 machine…in following the installation guides I have successfully installed the following Oracle Components
- Oracle Database 11.2.0.1.0
- Created Schemas using RCU 11.1.1.3.3
- Oracle WebLogic Server 10.3.3.0
- Oracle SOA 11.1.1.2.0
- Oracle SOA 11.1.1.3.0 (Patch Set)
- Oracle IAM SUITE 11.1.1.3.0
Following the above installations, I created a new WebLogic Domain and as the next step am running the OIM Configuration Wizard to configure the OIM Server, however I am unable to setup a connection to the Oracle DB via the OIM Configuration Wizard. I am getting an error message when attempting to setup the connection to the Oracle Database using the OIM 11g Server Configuration Wizard:
ERROR:*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
When installing the Oracle Database 11gR2 I used the following install configuration:
Oracle base: C:\MyApps\Oracle
Software location: C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1
Database file location: C:\MyApps\Oracle\DB_HOME\oradata
Database Edition: Personal Edition (3.27 GB)
Character Set: Unicode (AL32UTF8)
Global database name: orcl.dev.com
Administrative Password: Password1
Confirm Password: Password1
When creating my Schemas using RCU 11.1.1.3.3 I used the following Database Connection Details
DB TYPE: Oracle Database
HOST NAME: localhost
PORT: 1521
SERVICE NAME: orcl.dev.com
USERNAME: sys
PASSWORD: Password1
ROLE: SYSDBA
I used a Prefix of “DEV” when creating the schemas so Schema Owners DEV_OIM and DEV_MDS where created. Also, I configured to use the same password for all Schemas: “Password1″. So the password for DEV_OIM and DEV_MDS should be the same, “Password1″.
REPRODUCING THE ERROR
To reproduce the error, when I launch the Oracle Identity Management 11g Configuration Wizard I am first brought to the “Welcome” Screen. I click the [Next>] button.
Next, I am on the “Components to Configure” screen where I select OIM Server and OIM Design Console and click the [Next>] button. (NOTE I have also tested by simply selecting only the OIM Server)
Next, I am on the “Database” screen where I enter the connection information
Connection String: localhost:1521:orcl.dev.com
(NOTE I have also tested using localhost:1521:orcl)
OIM Schema User Name: DEV_OIM
OIM Schema Password: Password1
MDS Schema User Name: DEV_MDS
MDS Schema Password: Password1
When I click the [Next>] button after entering the Database Connection details I encounter the following two errors (1 error for each logon DEV_OIM and DEV_MDS)
INST:6102 Unable to connect to the database with the given credentials.
INST:6102 Unable to connect to the database with the given credentials.
TROUBLESHOOTING
NOTE: I can successfully start the Oracle DB Services and connect via the Enterprise Console, SQL Plus, and JDBCTest Java Client…I just cannot get past this connection error in the OIM Server Configuration Wizard.
JDBCTest.java TEST CLIENT
NOTE: THIS IS THE JAVA TEST CLIENT THAT I AM USING TO TEST DATABASE CONNECTIVITY THRU A SPECIFIED JDBC URL AND DRIVER THAT WORKS SUCCESSFULLY.*
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.DriverManager;
import java.sql.ResultSet;
public class JDBCTest {
public static void main(String[] args) throws Exception {
String url = "jdbc:oracle:thin:@localhost:1521:orcl";
String driver = "oracle.jdbc.OracleDriver";
String user = "DEV_OIM";
String password = "Password1";
try {
Class.forName(driver);
Connection conn = DriverManager.getConnection(url, user, password);
// Get the MetaData
DatabaseMetaData metaData = conn.getMetaData();
// Get driver information
System.out.println("");
System.out.println("#########################################");
System.out.println("# ***DRIVER INFORMATION***");
System.out.println("#");
System.out.println("# Driver Name = " + metaData.getDriverName());
System.out.println("# Driver Version = " + metaData.getDriverVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get database information
System.out.println("#########################################");
System.out.println("# ***DATABASE INFORMATION***");
System.out.println("#");
System.out.println("# Database Product Name = " + metaData.getDatabaseProductName());
System.out.println("# Database Product Version = " + metaData.getDatabaseProductVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get schema information
ResultSet schemas = metaData.getSchemas();
System.out.println("#########################################");
System.out.println("# ***SCHEMA INFORMATION***");
System.out.println("#");
System.out.println("# Schemas:");
while (schemas.next()) {
System.out.println("# " + schemas.getString(1));
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get table information
System.out.println("Tables");
ResultSet tables = metaData.getTables("", "", "", null);
while (tables.next()) {
System.out.println(tables.getString(3));
conn.close();
} catch (Exception ex) {
ex.printStackTrace();
*"lsnrctl status" COMMAND TEST SUCCESSFUL*
When the Listener Service is on I get the following output using lsnrctl status command
C:\> lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-SEP-2010 15:59:43
Copyright (c) 1991, 2010 Oracle. All rights reserved.
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows:Version 11.2.0.1.0 - Production
Start Date 21-SEP-2010 14:43:57
Uptime 0 days 1 hr. 15 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
Listener Log File c:\myapps\oracle\diag\tnslsnr\\listener\alert\log.xml
Listening Endpoints Summary…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary…
Service “CLRExtProc” has 1 instance(s).
Instance “CLRExtProc”, status UNKNOWN, has 1 handler(s) for this service…
Service “orcl.dev.com” has 1 instance(s).
Instance “orcl”, status READY, has 1 handler(s) for this service….
Service “orclXDB.dev.com” has 1 instance(s).
Instance “orcl” status READY, has 1 handler(s) for this service…
The command completed successfully

Whenever installing oracle databases, i install the software only first. Then i setup the listener. Then i create a database instance using the dbca tool. This way all the information is added to the pre-existing listener configurations rather than trying to create the listener afterwards. Also, during the dbca database creation, i supply a full service name such as orcl.hostname and use the service name in future configurations where it asked. This usually solves any issues of the listener or database not being found correctly.
-Kevin

URL file-access is disabled in the server configuration

My hosting company has made a server config change and my xslt pages have stopped working with the following error.
It says url file access is disabled but my phpinfo() still shows allow_url_fopen = on
What else might be the problem?
Warning: require_once() [
function.require-once]: URL file-access is disabled in the server configuration in
/homepages/0/xxx/htdocs/xxxx/inc/horoscope_xml.php on line
3
Warning: require_once(
http://www.xxxx.co.uk/includes/MM_XSLTransform/MM_XSLTransform.class.php) [
function.require-once]: failed to open stream: no suitable wrapper could be found in
/homepages/0/xxxx/htdocs/xxxxx/inc/horoscope_xml.php on line
3
Fatal error: require_once() [
function.require]: Failed opening required 'http://www.xxxxx.co.uk/includes/MM_XSLTransform/MM_XSLTransform.class.php' (include_path='.:/usr/lib/php5') in
/homepages/0/xxxx/htdocs/xxxxx/inc/horoscope_xml.php on line
3

bikeman01 wrote:
I don't understand your use of the word 'class' in your reply - I am using php not asp.net.
The name of the file that you are trying to access is MM_XSLTransform.class.php. It is a PHP class created by Dreamweaver for the XSL Transformation server behavior.
The servers php is 5.2.11, as it has been for sometime, so I know that it previously worked with allow_url_fopen = on and allow_url_include = off
Judging from the error message, you are trying to include the file using a URL, rather than a file path:
Fatal error: require_once() [
function.require]: Failed opening required 'http://www.xxxxx.co.uk/includes/MM_XSLTransform/MM_XSLTransform.class.php' (include_path='.:/usr/lib/php5') in
/homepages/0/xxxx/htdocs/xxxxx/inc/horoscope_xml.php on line
3
Change the URL to a file path:
require_once('/homepages/0/xxxx/htdocs/includes/MM_XSLTransform/MM_XSLTransform.class.php');
Is it possible for phpinfo() to show allow_url_fopen = on yet be actually off on the server?
No.
[Edited to correct name of server behavior]

NWDI for the 04s preview fails with 'SLD name-server configuration error'

After the installation, everything seems to work fine except that when I go to CMS, the links on the top seems to be hardcoded to point to http://pwdf3102:50100/dtr, even in the Domain Data. When I tried to change it to my local server, it keeps complaining about "Unexpected error; inform your system administrator: <Localization failed: ResourceBundle='com.sap.cms.util.exception.CMSExceptionMessages', ID='SLD name-server configuration error', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key SLD name-server configuration error"
Any suggestions on how to work around this? Thanks.

Brian,
Try to import the model file first by going to SLD->Administration->Import CIM Model. If the problem sticks, then try to remove the systems. The preview version has lots of pre-exist system name in the technical system, which you can find giving errors since they're not reachable. So you can remove them from SLD (Home->Technical Systems) if they are preventing you from procceeding.
You need to go to http://server:port/dtr/system-tools/administration/NameServerConfiguration to update the name server as well.
Hope this helps...
Message was edited by: Yujian Yan

Regd.UDDI server configuration in PI 7.1 and services registry

Hi ,
i have gone through many forum posts before posting this , so expecting a genuine answer:) which can be rewarded:).
I am using PI 7.1 and trying to taste the services registry flavour of it.
i followed the SAP Note 1267817 - Configure Services Registry proxy , but i am not able to assign the roles
SERVICES_REGISTRY_READ_ONLY or SERVICES_REGISTRY_READ_WRITE in Su01.
i get a message that such a role doesnt exist at all.
Qn1:Do i need installed any software componet like UDDI etc, or do in need to have uddi server
configured for this , if yes how to do that..
I have seen the help.sap link : I am struck at the point "Discovery URL host name", according to the help.sap it will come automatically , but in my case it has some Rivalry.
Qn2:How to configure UDDI server n PI 7.1
, any step by step guide which applies to PI 7.1 will help.
Qn3:What is the relation between tcode soamanager, services registry and UDDI
Qn4: I am not able to search my services in soamanager->business administration->WS administration
I have activated the services (Webservice Runtime)as mentioned in the Blog
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d06b6392-cde7-2c10-8f8b-bdea5d781dd9

Thanks Raj,
This property specifies a URL for the host name of the *physical machine where the Discovery
API of the UDDI server is located.* Its value is set automatically by default.
I am not able to understand this present in [help.sap |http://help.sap.com/saphelp_nwpi71/helpdata/en/45/c1ea61a1194432e10000000a155369/frameset.htm]
what may be the reason for not able to assign the above roles as per the sap note given above?
Is there any componet needs to be installed line UDDI?Can a technical user role have this roles
accepted,i used my ID for configuration XI super user!
After following the note partially i.e w/o giving the user roles. when in rt click sender agreement and say publish
it slaps me with this error
Com.sap.aii.ib.core.uddi.RegistryCleintException:
A save request exceeded the quantity limits u2026Number of Business Entries Exceeds Your limit of 1(2)
But if i open Services registry i can see that service got published.when i test in WS navigatore it
gives 503 service unavailable error.
How to delete unused published services
. Initialy i took the wsdl URL generated from
disply WSDL and published using publish tab in Services Registry , they dont have any key associated.
How to delete them?I can see any direct option
Regards,
Abhi

Weblogic Admin server - Configuration/Server Start/Arguments ignored?

Hi,
I'm trying to specify a http proxy for a WebLogic Admin Server in order for an application to access external resources. I've placed the settings into the "Server Configuration / Server Start / Arguments", and verified that they have been saved into the config/config.xml file for that domain:
<server-start>
<arguments>-Dhttp.proxyHost=[XXXX] -Dhttp.proxyPort=8080</arguments>
<password-encrypted>[XXXX]</password-encrypted>
</server-start>
However, no matter how I start the server, these settings are ignored despite that the documentation states these should be added to the java command line.
starting weblogic with Java version:
java version "1.6.0_19"
Java(TM) SE Runtime Environment (build 1.6.0_19-b04)
Java HotSpot(TM) 64-Bit Server VM (build 16.2-b04, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=256m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sysext_manifest_classpath weblogic.Server
As a test I created a new managed server in the same domain, specifying the same startup properties, and they were picked up during startup.
If I manually place the settings into the bin/setDomainEnv.cmd batch file for the domain they are also picked up and work.
Is there an undocumented restriction on Admin Servers that they ignore the "Server Start / Arguments" setting, or is there something else I can check as to why this is not working?
Many thanks,
- Micha.

Umm... I already pasted the relevant snippet out of the config.xml, but following is the entire file. The startup arguments, as specified in the admin console, are:
-Dhttp.proxyHost=[XXXXXXXX] -Dhttp.proxyPort=8080
which matches what is saved in the config.xml.
<?xml version='1.0' encoding='UTF-8'?>
<domain xmlns="http://xmlns.oracle.com/weblogic/domain" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/security/xacml http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator/1.0/passwordvalidator.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd">
<name>wls_starter</name>
<domain-version>10.3.2.0</domain-version>
<security-configuration>
<name>wls_starter</name>
<realm>
<sec:authentication-provider xsi:type="wls:default-authenticatorType"></sec:authentication-provider>
<sec:authentication-provider xsi:type="wls:default-identity-asserterType">
<sec:active-type>AuthenticatedUser</sec:active-type>
</sec:authentication-provider>
<sec:role-mapper xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
<sec:authorizer xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
<sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
<sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:name>myrealm</sec:name>
<sec:password-validator xmlns:pas="http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator" xsi:type="pas:system-password-validatorType">
<sec:name>SystemPasswordValidator</sec:name>
<pas:min-password-length>8</pas:min-password-length>
<pas:min-numeric-or-special-characters>1</pas:min-numeric-or-special-characters>
</sec:password-validator>
</realm>
<default-realm>myrealm</default-realm>
<credential-encrypted>[XXXXXXXXXX]</credential-encrypted>
<node-manager-username>weblogic</node-manager-username>
<node-manager-password-encrypted>[XXXXXXXX]</node-manager-password-encrypted>
</security-configuration>
<server>
<name>AdminServer</name>
<max-http-message-size>-1</max-http-message-size>
<ssl>
<enabled>false</enabled>
</ssl>
<log>
<file-name>logs/AdminServer.log</file-name>
<rotation-type>bySize</rotation-type>
<number-of-files-limited>true</number-of-files-limited>
<file-count>7</file-count>
<file-min-size>500</file-min-size>
<rotate-log-on-startup>true</rotate-log-on-startup>
<logger-severity>Trace</logger-severity>
<logger-severity-properties></logger-severity-properties>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<domain-log-broadcast-severity>Notice</domain-log-broadcast-severity>
<memory-buffer-severity>Debug</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>false</redirect-stdout-to-server-log-enabled>
<domain-log-broadcaster-buffer-size>1</domain-log-broadcaster-buffer-size>
</log>
<machine>[XXXXXXXXXX]</machine>
<listen-port>8080</listen-port>
<listen-port-enabled>true</listen-port-enabled>
<web-server>
<frontend-http-port>0</frontend-http-port>
<frontend-https-port>0</frontend-https-port>
<keep-alive-enabled>true</keep-alive-enabled>
<keep-alive-secs>30</keep-alive-secs>
<https-keep-alive-secs>60</https-keep-alive-secs>
<post-timeout-secs>30</post-timeout-secs>
<max-post-size>-1</max-post-size>
<send-server-header-enabled>false</send-server-header-enabled>
<wap-enabled>false</wap-enabled>
<accept-context-path-in-get-real-path>false</accept-context-path-in-get-real-path>
</web-server>
<listen-address></listen-address>
<java-compiler>javac</java-compiler>
<tunneling-enabled>false</tunneling-enabled>
<tunneling-client-ping-secs>45</tunneling-client-ping-secs>
<tunneling-client-timeout-secs>40</tunneling-client-timeout-secs>
<server-start>
<arguments>-Dhttp.proxyHost=[XXXXXXXX] -Dhttp.proxyPort=8080</arguments>
<password-encrypted>[XXXXXXX]</password-encrypted>
</server-start>
<server-life-cycle-timeout-val>30</server-life-cycle-timeout-val>
<startup-timeout>0</startup-timeout>
<graceful-shutdown-timeout>30</graceful-shutdown-timeout>
<ignore-sessions-during-shutdown>false</ignore-sessions-during-shutdown>
<client-cert-proxy-enabled>false</client-cert-proxy-enabled>
</server>
<embedded-ldap>
<name>wls_starter</name>
<credential-encrypted>[XXXXXXXXXX]</credential-encrypted>
</embedded-ldap>
<configuration-version>10.3.2.0</configuration-version>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<machine>
<name>[XXXXXXXXXX]</name>
</machine>
<jms-server>
<name>WseeJmsServer</name>
<target>AdminServer</target>
<persistent-store>WseeFileStore</persistent-store>
</jms-server>
<jms-server>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<persistent-store>WseeFileStore</persistent-store>
</jms-server>
<self-tuning>
<work-manager>
<name>weblogic.wsee.mdb.DispatchPolicy</name>
<target>AdminServer</target>
</work-manager>
</self-tuning>
<file-store>
<name>WseeFileStore</name>
<directory>WseeFileStore</directory>
<target>AdminServer</target>
</file-store>
<jms-system-resource>
<name>WseeJmsModule</name>
<target>AdminServer</target>
<sub-deployment>
<name>BEA_JMS_MODULE_SUBDEPLOYMENT_WSEEJMSServer</name>
<target>WseeJmsServer</target>
</sub-deployment>
<descriptor-file-name>jms/wseejmsmodule-jms.xml</descriptor-file-name>
</jms-system-resource>
<jms-system-resource>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<sub-deployment>
<name>[XXXXXXXXXX]</name>
<target>[XXXXXXXXXX]</target>
</sub-deployment>
<descriptor-file-name>[XXXXXXXXXX]</descriptor-file-name>
</jms-system-resource>
<admin-server-name>AdminServer</admin-server-name>
<jdbc-system-resource>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<descriptor-file-name>[XXXXXXXXXX]</descriptor-file-name>
</jdbc-system-resource>
<saf-agent>
<name>ReliableWseeSAFAgent</name>
<target>AdminServer</target>
<store>WseeFileStore</store>
</saf-agent>
</domain>

Oracle Calendar Server Configuration Assistant fails with Red Hat ES 4

I am trying to install Oracle Collaboration Suite 10.1.2 on a Red Hat ES 4 server platform.
I have installed with the Advanced Installation Option. The infra installation proceeds well then when i try to install the ocs application tier (different Oracle Home) the Calendar Server Configuration Assistant fail.
Output :
================================================================================================================
Output generated from configuration assistant "Calendar Server Configuration Assistant" (attempt 1):
Time zone selected: EBST3EBDT.Warning: Existing node(s) found in unison.ini. Using node 1 for configuration tasks.
Current State for Instance:ocsapp.lf-ocs1.lima_e_falcao.inet
Component Type Up Status In Sync Status
================================================================================
1 HTTP_Server HTTP_Server Up True
2 OC4J_Content OC4J Up True
3 OC4J_Mail OC4J Up True
4 OC4J_OCSADMIN OC4J Up True
5 OC4J_OCSClient OC4J Up True
6 OC4J_Portal OC4J Up True
7 OC4J_RM OC4J Down True(Disabled)
8 OC4J_Wireless OC4J Up True
9 OC4J_imeeting OC4J Up True
10 Service_Component_Cont OC4J Up True
11 home OC4J Up True
Warning: more than one process-type Element in the snippet. only the 1st one is appended
Error: can not append, there is a same named process type element in the exisitng ias-instance.ias-component
Error: Could not configure OPMN module information.
java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.configureOPMN(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.run(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.main(Unknown Source)
3 [main] ERROR emSDK.config - oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
     at oracle.sysman.emSDK.conf.TargetInstaller.addTargetInt(TargetInstaller.java:1148)
     at oracle.sysman.emSDK.conf.TargetInstaller.addTargetFromFile(TargetInstaller.java:1075)
     at oracle.sysman.emSDK.conf.TargetInstaller.main(TargetInstaller.java:3669)
Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
Warning: ocad.conf already included in /u01/oracle/product/10.1.2/ocs_2/Apache/Apache/conf/oracle_apache.conf.
Error: java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1: Registration of ocal_targets.xml into targets.xml failed.unistart: Oracle Calendar Server 10.1.2.0.0
unistart: Copyright (c) 1993, 2005, Oracle.
unistart: All rights reserved.
unistart:
unistart: opmnctl: opmn is already running
unistart: opmnctl: starting opmn managed processes...
unistart: The Calendar Server started successfully.
Orclguest account has already been provisioned for Calendar.
Fatal Exception caught : java.lang.NullPointerExceptionopmnctl: stopping opmn managed processes...
Configuration assistant "Calendar Server Configuration Assistant" failed
================================================================================================================
Someone can help me?
Thanks a lot.

is it a reinstallation or a first one on a bare server ? if there were several attempts please be sure you cleaned evrything before launching the installation :
- product directory
- /etc/ora*
- database
- oraInventory
- /tmp (I had a similar issue with remaining files in /tmp, even after rebooting)
If it doesn't work, check that you don't hit the NO-EXCUTE problem (see the OCS 10.1.2 release notes, look for "noexec")

Newbie problems with getting a local CFB server configured

This started out in another post by me as to what I thought was a port 8500 problem. I had watched the getting started with CFB video, and on that he used localhost as a Server Name and as Host Name. He then assigned port 8500 as the WebServer Port.
When I do this it comes up in the Servers windows as Stopped. If I try to start it the error I get is
'Starting localhost' has encountered a problem
Ensure that the server is not already running or any application is not using the webserver port.
So as an experiment I changed the port to 80 because the admin page does work at http://127.0.0.1/CFIDE/administrator/index.cfm
The Server window at the bottom of the CFB screen then shows a Running server.
I create a small "Hello World" index.cfm page and when I hit one of of the browser tabs, Firefox and IE in my case, I get the following error,
Error while generating preview:
There is no server configured for the project myproject to which the file index.cfm belongs. Configure a server in ColdFusion in ColdFusion server settings before you proceed.
What am I missing ?
Thanks,
Dennis

You need to tell CFB what server CFB should use in order to preview the file.
So you need to associate a server with this Project. To do so, right click on Project -> Properties -> ColdFusion Server Settings.
Here from the dropdown of 'Servers' select the server that you added in CFB.
Once that is done, ensure that your project is in document root of the server which in your case could be the Inetpub\wwwroot.
Once this is done the preview should work.
-Bhakti!
Adobe ColdFusion Team

Running reports created with Reports 9i in client-server configuration

I need to have users run reports created with Oracle Reports 9i on workstations without any Oracle products installed on it, (in a client-server configuration as opposed to Web based) . I am looking for a step-by-step approach to accomplish this. I looked through the installation documents in OTN and I did not see one that addressed this.
BTW, I saw an earlier post in this form which disscussed this,indirectly, for Reports 6i but I don't think these steps will work for 9i rpeorts
** Earlier post
Question:
I have an application in Oracle 8i, Forms 6i, Reports 6i. Now I want to make executable CD which will be installable in nature. I don't know how to make it or what tools to be used for this . Kindly help me out.
Answer:
You can write a .bat file for installation.....
This file should do following things.
1. Oracle8 Personal Setup
Install only Database (no tools)
2. Oracle Developer200 Setup
Install only Forms Runtime
Reports Runtime
Graphics Runtime
3. Use imp/exp to put the desired database...
4. Copy exexutables in some directory and place shortcuts in programs and destkop
5. Make new file-types in start->setting ->folder options-> file-types
and specify that in which runtime-application you want to open your executables....
Thanks in advance,
Audrey Watson

hi audrey,
there is no client/server runtime available for reports9i. what
you can do is to use the rwclient executable shipped with IDS
to submit jobs to the reports server.
there are plans to provide a stand alone thin client in the
future but this is not available yet.
regards,
christian

How can you tell what type of server configuration is installed? is it j2ee or not?

Before I run an updater, how can I tell if the server is a
j2ee server configuration or a "regular" server configuration? Its
on on Linux os...

My "Settings Summary" shows;
Server Product ColdFusion MX
Version 7,0,0,91690
Edition Enterprise
Serial Number blah-blah-blah
Operating System UNIX
OS Version 2.6.15-1.1833_FC4smp
JVM Details
Java Version 1.4.2_05
Java Vendor Sun Microsystems Inc.
Java Vendor URL
http://java.sun.com/
Java Home /opt/coldfusionmx7/runtime/jre
Java File Encoding UTF8
Java Default Locale en_US
File Separator /
Path Separator :
Line Separator Chr(10)
User Name nobody
User Home /
User Dir /opt/coldfusionmx7/runtime/bin
Java VM Specification Version 1.0
Java VM Specification Vendor Sun Microsystems Inc.
Java VM Specification Name Java Virtual Machine Specification
Java VM Version 1.4.2_05-b04
Java VM Vendor Sun Microsystems Inc.
Java VM Name Java HotSpot(TM) Server VM
Java Specification Version 1.4
Java Specification Vendor Sun Microsystems Inc.
Java Specification Name Java Platform API Specification
Java Class Version 48.0
--> and lots more, but no mention whether its a J2EE
configued server or not...so should I assume its not a
regular/non-J2EE server?
I ask because the Updaters instructions show a BIG difference
depending on which type it is to be updated...thanx...Matt

Where is the server configuration data stored?

Where is the server configuration data stored?
<P>
The data is stored an ASCII file named server.conf
. This file is stored in
the config directory on the same server-root as the iCS 2.0 binaries. The
format of the server.conf
file is described in detail in the Administration
Guide.

Try to read
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e1959b90-0201-0010-849c-d2b1d574768b
UME user data is stored in one or more data sources. Each type of data source has its own persistence adapter. The persistence manager consults the persistence adapters when creating, reading, writing, and searching user management data. Persistence adapters for the following types of repositories are available: 1. Database: See the Product Availability Matrix on SAP Service Marketplace (http://service.sap.com/pam60) for details on which databases are supported. 2. u2022 Lightweight Directory Access Protocol (LDAP) directory: See the Product Availability Matrix on SAP Service Marketplace (http://service.sap.com/pam60) for details on which directories are supported. 3. SAP Systems based on Web Application Server 6.20 You can configure UME to use one or more of these persistence devices in parallel. Users can also be stored in several different physical LDAP directory servers, or in different branches of the same LDAP directory server.

Sub:when trying to open "adminisration server configuration"

Hi
all,
when i am trying to open component definitions in admin server configuration, I am getting following error.
An error has occurred creating business component 'Enterprise Service Definitions' used by business object 'Server Admin'. Please ask your systems administrator to check your application configuration.(SBL-DAT-00222)
please let me know the solution.
thanks
sudhakar

Hi,
Maybe you would have already done this activity.
If not just check if the responsibility "Siebel Administrator" is mapped to the user id using which you were getting such errors.
Regards,
Sambit

SQL Server Configuration Tools Disappeared

I know I used to have Server Configuration Tools, but when I just looked for it, it seems like it has disappeared. I'm looking at this.
I'm getting this login error.
I used to be able to reset SQL Server using the Configuration Tools, but now I can't reset it, and I can't login.
Please help!!
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Hello,
When you connect using SSMS ( SQL server management studio) in server name give like
hostname\mssqlserver--if it is default instance
hostanme\instancename if it is named instance
hostname\SQLEXPRESS is it is express edition
now go to run tyoe services.msc look for SQL server services check if it starte dor not if not please start in try connection using above information
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

VM server Configuration.

Similar Messages

Maybe you are looking for