VME-MXI-2 unable to load configuart​ion because it is not compatible with the hardware
Hello Guys,
I would really appreciate if one or more of you help solve this situation. I am trying to load a configuration file to the hardware configuratuion of the VME-MXI-2 board but I am getting the message " Unable to load configuration from file VME-MXI-2.cfg: Save file is incompatible with hardware [-5]". The files is expected to be compatible with the card. What could be happening??
Regards and thank you in advance!!
alcaEli
Hello and thanks for the reply,
The configuration I am trying to load corresponds to a system that uses windows 95. The OS of my system is windows 98; when I save the configuration of my system to a file and load it again to the VME-MXI-2 card, it loads fine. The configuration from the card working with windows 95 is not loading; in the windows 98 system, once I click load, select the folder and windows 95 configuration file and then click OK the error message stated in the previous email is displayed. Could this be happening because of the differences in operating systems???
Thanks!!
alcaEli
Similar Messages
-
I'm unable to backup my iphone. It is saying 'iTunes could not backup because the backup was corrupt or not compatible with the i Phone.' i deleted my previous back up but it still isn't helping. Any suggestions ?
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.
Delete the entire Backup folder if there is anything at all in it. -
When trying to update my iPad to version iOS 7.0.04 I keep getting 'Unable to Verify Update' message 'Because I am not connected to the Internet'. I am connected. I have reset iPad, reset Internet connections but to no avail?
Boy sure what you are doing but the current iOS level is 7.1 not 7.0.4.
You cannot update to 7.0.4. -
I have been unable to sync my iPad with my pc since November 2013. The message that I receive is that "iTunes could not back up the iPad because the backup was corrupt or not compatible with the iPad. My iPad is running the most current update and my iTunes program is also the most recent update. What could be the reason for and solution to this problem?
You might want to try deleting your old backup. That could be the source of the problem.
Launch iTunes and go to Edit>Preferences>Devices>Your backup name. Click on your backup to select it, and then click on Delete. Click on OK.
Connect your iPad to your computer and try again. -
I am unable to backup my iPhone4 (4.3.4) after months of successful backups. Receive "iPhone could not backup the iPhone because the backup was corrupt or not compatible with the iPhone. Followed advise on user forum to delete the old backup... did not help. Need to do a backup. Is there a cure?
The only thing that resolved it for me was to COMPLETELY remove all Apple components per http://support.apple.com/kb/ht1925. I also downgraded to iTunes 10.3 since my issue didn't start until after the 10.4 update. May not be related but oh well....You will have to restore your old iTunes Library file (*.itl) if you downgrade.
-
I'm totally frustrated by iTunes and don't know how to solve my problem. Like a lot of people on here I'm not able to sync or back up my iPad2 with my iTunes (version 10.4.1.10). I'm running Win 7 Ultimate 64 bit. My iTunes worked just fine until the 10.4.xx updates came out and since June I've not been able to back up or sync the iPad2.
When I connect and try to sync I get the error message, “iTunes could not back up the iPad because the backup was corrupt or not compatible with the iPad.”
I've deleted all the old backups so there are none on my system. I've deleted iTunes and re-installed the 64bit version several times but it has not made any difference. I've read and followed several suggestions on these boards about how to remove and reinstall everything but none have worked yet. I'm stumped here.I had the exact same thing with my shuffle - same error message saying that it was corrupt so I restored it (wiping everything in the process) and the same message came up as soon as it reloaded. Thank god I didn't try it with my iPod or iPhone first. So many issues with this new version of iTunes!!!!!!!!
-
Hi,
We have installed FIM MA with an account that have all the sufficient rights.It got created successfully and worked for Full Import and Full Sync. But, due to some version incompatabilities, we have installed a patch.PFB link for the patch.
http://support.microsoft.com/en-us/kb/2969673/en-us
Now, we are trying to refresh the schema of FIM MA. While doing that we are facing an error "Failed to connect to database". The user account with which we are connecting has read and write permissions on DB.In the event viewer some errors are
logged like "the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1122" with event ID 3. PFB images for more detailed
view.
Please advice how to fix the issue.
Thanks
Prasanthi.Hello,
seems to me that you maybe only updated the syncengine but not portal/webservice.
I had that error once after an recovery from scratch and forgot one of the hotfixes to apply to all services.
-Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com -
I am using Kasperski Internet Security
I do not use this, but a quick web search suggests problems may be with the add-ons rather than the core Kasperski Anti Virus program.
See for instance:[http://forum.kaspersky.com/index.php?showtopic=211298&view=findpost&p=1682494] where a forum moderator says "''Kaspersky is aware of the issue and is working on a fix.''"
Additional info: <br> see also thread [/questions/843375]
If the problem is a simple one of the toolbar compatibility, and the toolbar is an add on then try downloading, installing and running [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ compatability reporter] that may be a quick fix. -
compatible with mozilla 8 or 9.,what version do i need to download of mozilla edit
You could use firefox 3.6, which is old but still supported and secure. However the best solution is to give up on using Google Toolbar because Google no longer support it with firefox, mainly because it has little to offer.
You can still save google bookmarks by copying them into Firefox. Please have a look at
* [[google Toolbar is not compatible with Firefox]] <-- clickable link -- <br> which may help with some ideas and proposed solutions.
I am hoping the Norton report you refer to merely says your system has vulnerabilities, rather than that it has an actual infection (or that it has dealt with or quarantined any malware). -
Failure to Load Project: OA Express Datatypes not Compatible with SignalExpress 2014
Hi,
since a few days now, I am trying to get SignalExpress 2014 Full running on my workstation. I deinstalled and reinstalled all National Instruments components multiple times, but I always receive the following error (see also the picture attached) when I try to open a certain project:
Failure to load project
Installed component versions are not compatible with the version of the SignalExpress 2014. Please install the latest versions of the following:
1) OA Express Datatypes
Previously, there was also "DAQ Assistant" mentioned in the list of missing components/components with incompatible versions, but I could solve this with installaing NI-DAQmx. But I could not find anything looking for "OA Express Datatypes" --- I neither know in what package this component is located nor what the purpose of this component is.
Any help is appreciated.Just did a downgrade and it's working again, here are my versions.
linux 3.9.9-1
linux-headers 3.9.9-1
nvidia 319.32-2
nvidia-utils 319.32-1
bbswitch 0.7-4
If you have conflicts, I found it easiest to remove those (bbswitch, virtualbox in my case), downgrade linux and then install the appropriate bbs/vb packages -
Hi Everyone,
Please help me on this issue. I'm a new SSIS User.
I've installed Sql Server 2005 Developer Edition
When I create a new SSIS Project in Business Intelligence Development Studio,
I get the following message:
"Microsoft Visual Studio is unable to load this document: Object reference is not set to an instance of an object".
Error loading 'package.dtsx'bject reference is not set to an instance of an object
When I try to debug the package, I get the below message:
parameter Component(System.Design) is null.
I've uninstalled and installed SS 2005 several times, yet the problem persists.
Please help.
This is the package.dtsx
<?xml version="1.0"?><DTS:Executable xmlnsTS="www.microsoft.com/SqlServer/Dts" DTS:ExecutableType="MSDTS.Package.1"><DTSroperty DTS:Name="PackageFormatVersion">2</DTSroperty><DTSroperty DTS:Name="VersionComments"></DTSroperty><DTSroperty DTS:Name="CreatorName">US\kothand1</DTSroperty><DTSroperty DTS:Name="CreatorComputerName">US6051KOTHAND1</DTSroperty><DTSroperty DTS:Name="CreationDate" DTSataType="7">4/8/2008 10:53:39 AM</DTSroperty><DTSroperty DTS:Name="PackageType">5</DTSroperty><DTSroperty DTS:Name="ProtectionLevel">1</DTSroperty><DTSroperty DTS:Name="MaxConcurrentExecutables">-1</DTSroperty><DTSroperty DTS:Name="PackagePriorityClass">0</DTSroperty><DTSroperty DTS:Name="VersionMajor">1</DTSroperty><DTSroperty DTS:Name="VersionMinor">0</DTSroperty><DTSroperty DTS:Name="VersionBuild">0</DTSroperty><DTSroperty DTS:Name="VersionGUID">{FBD98635-EDDE-4F58-9D53-356E8CB653FB}</DTSroperty><DTSroperty DTS:Name="EnableConfig">0</DTSroperty><DTSroperty DTS:Name="CheckpointFileName"></DTSroperty><DTSroperty DTS:Name="SaveCheckpoints">0</DTSroperty><DTSroperty DTS:Name="CheckpointUsage">0</DTSroperty><DTSroperty DTS:Name="SuppressConfigurationWarnings">0</DTSroperty><DTSroperty DTS:Name="ForceExecValue">0</DTSroperty><DTSroperty DTS:Name="ExecValue" DTSataType="3">0</DTSroperty><DTSroperty DTS:Name="ForceExecutionResult">-1</DTSroperty><DTSroperty DTS:Name="Disabled">0</DTSroperty><DTSroperty DTS:Name="FailPackageOnFailure">0</DTSroperty><DTSroperty DTS:Name="FailParentOnFailure">0</DTSroperty><DTSroperty DTS:Name="MaxErrorCount">1</DTSroperty><DTSroperty DTS:Name="ISOLevel">1048576</DTSroperty><DTSroperty DTS:Name="LocaleID">1033</DTSroperty><DTSroperty DTS:Name="TransactionOption">1</DTSroperty><DTSroperty DTS:Name="DelayValidation">0</DTSroperty>
<DTS:LoggingOptions><DTSroperty DTS:Name="LoggingMode">0</DTSroperty><DTSroperty DTS:Name="FilterKind">1</DTSroperty><DTSroperty DTS:Name="EventFilter" DTSataType="8"></DTSroperty></DTS:LoggingOptions><DTSroperty DTS:Name="ObjectName">Package</DTSroperty><DTSroperty DTS:Name="DTSID">{191D188C-EA6E-46D6-A46A-8C9F3C21C321}</DTSroperty><DTSroperty DTS:Name="Description"></DTSroperty><DTSroperty DTS:Name="CreationName">MSDTS.Package.1</DTSroperty><DTSroperty DTS:Name="DisableEventHandlers">0</DTSroperty></DTS:Executable>
Thanks
Best RegardsNo I have not yet. I've applied just the windows updates. I rebooted after the updates, but the problem persists.
I evern tried importing the .vssettings file from my co-worker's. Also, I tried resetting the user settings
using "%programfiles%\Microsoft Visual Studio 8\Common7\IDE\devenv.exe" /resetuserdata.
I'm on Windows xp 2002 service pack 2. Sql server 2005 Developer edition.
Visual Studio info:
Microsoft Visual Studio 2005
Version 8.0.50727.762 (SP.050727-7600)
Microsoft .NET Framework
Version 2.0.50727 SP1
Installed Edition: IDE Standard
Microsoft Visual Studio 2005 Premier Partner Edition - ENU Service Pack 1 (KB926601)
This service pack is for Microsoft Visual Studio 2005 Premier Partner Edition - ENU.
If you later install a more recent service pack, this service pack will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/926601
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 9.00.1399.00
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 9.00.1399.00
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 9.00.1399.00
Thanks
Best regards -
After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion>=1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and installed. Still no luck.
== This happened ==
Every time Firefox opened
== FF updated to 3.6.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
This application is not compatible with your device and cannot be loaded
Hi,
I have been trying to load an application to my BB 9000 since a monday and getting this error "This application is not compatible with your device and cannot be loaded".
As evident, I am new to BlackBerry development and got to port an existing J2ME project on BB 9000.
To load application I am using
- BB Dektop software 5 (latest)
- BB Device Software 4.6 is installed (which is the version of BB 9000 as well)
I am able to load sample JDE 4.6 applications but I build my project through same JDE and through eclipse (JDE compoment 4.6.0.19) as well but couldn't load it,
I even signed my app since I am using net.rim.device.api.servicebook api which requries signing.
Can someone please explain me
1) why this error occurs in first place
2) how to setup right envioroment to load an application on a given BB handset (BB 9000 vodafon India to be specific)
3) How would manage this process on a single machine if I have 4-5 different BB handsets.
I shall be thanful for any logical pointer to solution to these problems.Hi,
The main problem with your genrated ALX file. I think in your ALX file contains <fileset Java="1.49" _blackberryVersion="[5.0.0)"> TAG and remove the _blackberryVersion attribute. Then it will work.
So your final ALX file contains
<loader version="1.0">
<application id="App">
<name >
App1
</name>
<description >
</description>
<version >
1.0.0
</version>
<vendor >
Vim
</vendor>
<copyright >
Copyright (c) 2010
</copyright>
<fileset Java="1.49">
<directory >
5.0.0
</directory>
<files >
App.cod
</files>
</fileset>
</application>
</loader>
Even thought it is not installed then make sure that your application may not delete from your device. Select the application and click on delete button in Desktop manager.
Still u didnt slove the problem then insted of
<directory >
5.0.0
</directory>
replace as
<directory >
</directory>
Regards:
Jitendra.B
Vimukti technologies Pvt Ltd
Project Manager -
hi, i have an imac which i bought second hand but but the itunes store wont load up nor will me songs ect sync with the itunes on this comp? i have had no issues with this on previous laptops.... any more of this and i may move to samsung! please help!
kaylsk1 wrote:
udated and its on 10.6.8 yet still no change
Your signature in 1st post was 10.8.2.
You went backwards?
Did you reformat and reinstall when you first purchased it?
If not I HIGHLY recommend you do that before you do anything else. -
Need help-
On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????Thank you station_two but I did install them in my
applications>adobe>presets>brushes and still I get this error message......
On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]>
Maybe you are looking for
-
How to get a temporary pin number to my primary email apple ID cause i can not access to my icloud cause i forgot password and answers to the security questions, neither key nor two steps.
-
How to prevent files from being overwritten in PE7?
On a european tour I took about 1400 photos. I then downloaded 600 pix from a friends camera (both Canon). My pix were overwritten by his. Luckily I have my pix on a thumbdrive. How can I prevent overwriting photos taken on similar cameras on the
-
Hello everybody I have configure a cluster with 2 esxi with the version 5.5u2 and a vcenter server on which I have activate the vSphere HA. By default, all the virtual machines associated to the cluster are protected (monitored) by the vSphere HA (us
-
Mavericks Won't Install Onto 120GB SSD
Been using 120GB SSD as start-up drive with user file on larger HHD. Tried Mavericks clean install on to newly formatted SSD but installer failed due to it could not install recovery HD. I have always done clean installs of major updates then use i
-
When the download of Itunes7 was complete I received this message "C:\Documents and Settings\Kareen\Local Settings\Temporary Internet Files\Content.IE5\S0SGZFQA\iTunesSetup[1].exe" is not a valid Win32 application., what does this mean? dell inspiron