VMware tools and hardware version for Cisco vWLC

I am currently running a Cisco vWLC (v8.0.100.0) on VMware vSphere 5.5U2 supporting about 20 APs. I just recently upgraded to vSphere 5.5U2 and I was working my way through updating the VMware tools and VM Versions on all my VMs when I glanced at this info for the vWLC. The vWLC shows a VM version of 1 with the VMware tools not running and not installed. I am curious if it is necessary or even possible to update the VMware tools and VM version for the vWLC. The vWLC is working perfectly fine and I have no issue with leaving well enough alone, but this just kind of peeked my curiosity as I really couldn't find any concrete answers in any online documentation. Does anyone have any insight on this matter?

If it's working, then leave it alone. Some of the Cisco virtual, well maybe most, don't support the VMWARE tools. Updating the version to the latest will make you have to use vCenter as the sphere client will not allow you to edit the VM anymore.
-Scott

Similar Messages

WCS and WLC versions for Cisco 3600 WAP

Hi,
I got a few Cisco Aironet 3602i. The minimum WLC version to support these is 7.1.91.0. I am planning to upgrade to 7.2.103.0. The minimum WCS version to support these WAP is 7.0.220.0 and the next available 7.0.230.0. Checking the release notes for both of these WCS versions, there is no mention of support for WLC versions listed above.
http://www.cisco.com/en/US/docs/wireless/wcs/release/notes/WCS_RN7_0_230.html#wp152663
Am I missing something here ? What versions would be required on WCS and WLC to make all the three entities (WLC, WCS, WAP) inter-operable ?
Thanks,
Regards, Rashid.

Thanks Scott.
Table-5 from your link indicates WCS 7.0.230.0 support for WLC 7.1.91.0, although release notes for WCS fails to mention this. I think thats the only option in the our existing WCS based network then. Other option being to upgrade to NCS.
The NCS page http://www.cisco.com/en/US/products/ps6305/index.html indicates it will be offered to existing WCS customers when releases. Would we be required to pay for the product or both product and licenses or none ?

Recommended IOS XE version for Cisco Catalyst 4500X-16 SFP+ Switch

Could someone confirm IOS XE version for Cisco Catalyst 4500X-16 SFP+ Switch please.
It already has 03.06.00.E on it. I am planning to configure VSS on it with similar switch.
VSS will participate in various Etherchannels (MES).
Just wondering if there are any known bugs in this IOS XE release.

Use the Bug Search Tool to look for issues with vss, vsl, etc.
https://tools.cisco.com/bugsearch/

What is the major differences between 6.5 and 11 version for essabes?

Hi all,
Can anyone list me out the differences between essabase 6.4 and 11 version for essabe?
Thanks
hari

ASO
If you want differences, have a a look at overview tool which will tell you the difference from 9.3 onwards :- https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1092114.1
Otherwise check the documentation for the new feature sections :- https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1092114.1
Cheers
John
http://john-goodwin.blogspot.com/

I have installed 2010 microsoft office 2010 home and business version for my laptop,and i have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this que

I have installed 2010 Microsoft office 2010 home and business version for my laptop,and I have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this issue.
Regards
Raghavendar

Hi Raghavendar,
Generally, when you install Lync 2013 in the computer with Office 2010, a Lync Meeting Add-in will be installed and enabled in Outlook 2010. Please follow these steps to check it:
1. In Outlook, click the File tab, click Options, and then click
Add-Ins.
2. Please take one of the following actions:
If the add-in is in the Inactive Application Add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
COM Add-ins, and then click Go.
b. Click to select the check box next to the add-in, and then click OK.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should be available when you create a new calendar item.
If the add-in is in the Disabled Application add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
Disabled Items, and then click Go.
b. Select the add-in, and then click Enable.
c. Restart Outlook, and then verify that the add-in is displayed in the
Add-ins dialog box.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should now be available when you create a new calendar item.
3. In Event Viewer, view the Application log to see whether an error was logged for Outlook, for Lync 2013, the Lync Meeting Add-in for Microsoft Office 2013.
Thanks,
Winnie Liang
TechNet Community Support

How do I change the size of the tools and the text for the menus in Photoshop? I need a magnifying glass in order to make out what they are.

How do I change the size of the tools and the text for the menus in Photoshop? I need a magnifying glass in order to make out what they are.

Okay, I've figured it out, so I'm going to answer my own question in hopes that it may help anyone else that would like to actually be able to see what they're doing when using Photoshop CC 2014 on a high resolution screen.
1. Open Photoshop.
2. Select Preferences from the Edit Menu, then select General.
3. Change the HUD Color Picker to Hue Strip (Medium).
4. Select Interface from the Preferences menu on the left side of the dialog box.
5. Change the UI Font Size to Large in the Text area of the Preferences dialog box.
6. Select Experimental Features from the Preferences menu on the left side of the dialog box.
7. Select Scale UI 200% for high-density displays (Windows only).
8. Click on OK, then Exit/Quit Photoshop.
9. Open Photoshop and everything should be readable.

Need latest SLD and NWDI version for PI 7.1 EHP1

Can any one update me the latest SLD and NWDI version for PI 7.1 EHP1?
Kindly provide me the path of implementation guides for SLD, NWDI which can be used with PI 7.1 EHP1. For PI 7.1 EHP1, can we use the same version of SLD and NWDI which used IN PI 7.1?
Please help me for the above questions.
Regards,
Yuvaraj.

Hi Yuvaraj,
Please check the NWDI Development Infrastructure 7.11 and SLD 7.11 for the PI 7.1 EHP1.
Go to Service Market Place - Software Download > Support Packages and Patches > Support Packages and Patches - Entry by Application Group > SAP NetWeaver and complementary products > SAP NETWEAVER PI > SAP EHP1 FOR SAP NW PI 7.1 >Entry by Component > Development Infrastructure.
Hope it will helps
Regards
Arun Jaiswal

Software and Hardware Requirement for Management Agent

Can any one help me to find out the software and Hardware requirements for Oracle 10g Management AGent for various platforms.

Hi I have looked the Metalink Note which is mentioned in the reply but that is not having the exact software and Hardware Requirements (i.e os packages required for unix platforms) for OEM Agent. Please help me to know the requirements pls.

How to add additional disks on vmware OEL4 and use it for Oracle 10gR2?

I created a virtual machine on vmware workstation 6 and installed OEL4.
during first install I created 20 GB disk but now I want to add more disks.
from vmware documentation I tried to add more 8 gb disk to the virtual host.
under devices I see two lines;
Hard Disk (SCSI 0:0) 20.0 GB
Hard Disk (SCSI 0:2) 8.0 GB
but I must be missing some step since I can not see 20 + 8 gb at df;
[root@antuhost ~]# df -h
Filesystem            Size Used Avail Use% Mounted on
/dev/sda1              13G 9.7G 2.3G 82% /
none                  506M     0 506M   0% /dev/shm
/dev/sda2             4.9G 851M 3.8G 19% /homeThank you.

Oh the check the answer from Re: How to add additional disks on vmware OEL4 and use it for Oracle 10gR2?

Which axi version is the supported and compatible version for JDK1.4?

Hi,
Can any body tell me Which axi version is the supported and compatible version for JDK1.4.Thanks in advance.
Regards,
Lokesh Kumar Pattajoshi

Hi Jürgen
Please be advised that the customer is correct.
Please see the following note:
539188 TREX installations for E-Selling
For all E-Commerce and ICSS scenarios using
SAP Web Application Server Java 6.40 TREX 6.1. is recommended.
Hope this will be of assistance.
Kind regards Peter
Edited by: Peter Murphy on Jan 23, 2009 3:01 PM

HT4095 2 Some movies may not be available from iTunes in the Cloud. These movies, if purchased in HD, will download both the HD and SD versions for you to sync to your compatible iPod and iOS devices. Previous purchases may be unavailable if they have bee

2 Some movies may not be available from iTunes in the Cloud. These movies, if purchased in HD, will download both the HD and SD versions for you to sync to your compatible iPod and iOS devices. Previous purchases may be unavailable if they have been refunded or are no longer available in the iTunes Store, App Store, or iBookstore.

Do you have a question ? Not all content is available for re-downloading e.g. if the content provider (or Apple) removes them from the store, and there are also some film studios (in countries where film re-downlaoding is possible) who haven't agreed to allow their films to be re-downloaded.
Otherwise, re-downloading : http://support.apple.com/kb/HT2519

Ask the Expert : Initial Set Up and LAN Connectivity for Cisco UCS Servers

Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about related to the initial setup of UCS C & B Series which include LAN connectivity from the UCS perspective with Cisco subject matter expert Kenny Perez.
In particularly, Kenny will cover topics such as: ESXi/Windows installations, RAID configurations (best practices for good performance and configuration), VLAN/Jumbo Frames configuration for B series and C series servers, Pools/Policies/Upgrades/Templates/Troubleshooting Tips for blade and rack servers, Fabric Interconnects configuration, general compatibility of Hardware/Software/drivers amongst other topics
Kenny Perez is a technical leader in Cisco Technical Assistance Center, where he works in Server Virtualization support team. His main job consists of supporting customers to implement and manage Cisco UCS B series and C series. He has background in computing, networking, and Vmware ESXi and has 3+ years of experience support UCS servers and is VCP certified.
Remember to use the rating system to let Kenny know if he has given you an adequate response.
This event lasts through October 10th, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi,
Actually we have UCS 6248 fabric interconnect - first twelve ports are enabled and same in Cisco UCS Manager.
But when more port will be active by expansion module then UCSM can manage that too or need any other licence for UCSM too?

FUS Image version for Cisco 3702 AP

Dear Team,
What is the minimum version of Field Recovery image in WLC for Cisco 3702 series ..?
I have 6.0.182.0 version.. Is that supported..?
Note: I already upgraded WLC code to 7.6.120.0.

We recommend that you install Release 1.9.0.0 of Cisco Wireless LAN Controller Field Upgrade Software (FUS), which is a special AES package that contains several system-related component upgrades. These include the bootloader, field recovery image, and FPGA/MCU firmware. Installing the FUS image requires special attention because it installs some critical firmware. The FUS image is independent of the runtime image. For more information, see http://www.cisco.com/en/US/docs/wireless/controller/release/notes/fus_rn_OL-31390-01.html .
http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn76mr02.html

Show version for Cisco Blocker

Hi,
As I am not really tech savvy here, we curently have an issue where we need to verify a serial number for Cisco Blocker. However, customer said they did not have a show version and instead provided us with the system status information. However, from it, we cannot derive the correct serial either. Is anyone familiar with how to interpret the system status to derive the correct serial for Cisbo Blocker? Or are there other options the customer can give us to get the correct serial?
I am attaching the system status provided by the customer.
Thanks,
Cathy

Hi,
As
I am not really tech savvy here, we curently have an issue where we
need to verify a serial number for Cisco Blocker. However, customer
said they did not have a show version and instead provided us with the
system status information. However, from it, we cannot derive the
correct serial either. Is anyone familiar with how to interpret the
system status to derive the correct serial for Cisbo Blocker? Or are
there other options the customer can give us to get the correct serial?
I am attaching the system status provided by the customer.
Thanks,
Cathy
Cathy,
In the attachment you can able to see the serial number under the version area.
Hope to Help !!
Ganesh.H

Hi I need OID's and the MIBs for CISCO 6504 with SUP32??

Hi I need oids and the related MIBs for cisco 6504 with supervisor 32:
Fanstatus notification, Powerstatus notification, Interface up/down, BGP notifications like peer down bgp established, ospf notifications
Thanks,
Anudeep

Fan status
CISCO-ENV-MON mib
"ciscoEnvMonFanStatusEntry"          "1.3.6.1.4.1.9.9.13.1.4.1"
"ciscoEnvMonFanStatusIndex"          "1.3.6.1.4.1.9.9.13.1.4.1.1"
"ciscoEnvMonFanStatusDescr"          "1.3.6.1.4.1.9.9.13.1.4.1.2"
Power
ciscoEnvMonSupply
S
tatusEntry"          "1.3.6.1.4.1.9.9.13.1.5.1"
"ciscoEnvMonSupplyStatusIndex"          "1.3.6.1.4.1.9.9.13.1.5.1.1"
"ciscoEnvMonSupplyStatusDescr"          "1.3.6.1.4.1.9.9.13.1.5.1.2"
"ciscoEnvMonSupplyState"          "1.3.6.1.4.1.9.9.13.1.5.1.3"
"ciscoEnvMonSupplySource"          "1.3.6.1.4.1.9.9.13.1.5.1.4"
Interface
IF-MIB
ifAdminStatus 1.3.6.1.2.1.2.2.1.7
ifOperStatus   1.3.6.1.2.1.2.2.1.8
BGP
BGP4-MIB
for the rest i will leave it to you to find the exact OIDs
use this link to find other mibs that may interest you
http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=BGP&translate=Translate&submitValue=SUBMIT&submitClicked=true

VMware tools and hardware version for Cisco vWLC

Similar Messages

Maybe you are looking for