Voice memo playback low volume, ipod touch 4th gen bluetooth
After recording a voice memo on my ipod touch 4th gen. I play it back on my bluetooth JBL flip. Now when I playback sound levels are sometimes extremely quiet, and other times play at normal volume. Volume on Ipod touch and JBL flip will be maxed out and still volume playback are extremely quiet. I have tried turning off and on Ipod and not found anything work consistently at solving this issue.
Do you have a Phone? In your case i would save some money for an iPhone. Like i am doing now - i also got a 4G iPod.
Anyways if you really wanna go for another iPod, take the 5G now. The 5G is a big update from the 4G and Apple released it last year, so i think that the 6G will come in 2014.
Similar Messages
-
My new ipod touch 4th gen has a much lower volume than my old one, i have maxed the volumes out and got rid of all volume limits which has nor helped. Can anyone help?
Are you using the same headphones?
Did you officially purchase the in an EU country? They require a lower max volume than the USA and other countries. -
I have an iPod touch 4th gen. and the screen went yellow. The battery wasnt low when it happened. It has been like this all day. What can I do to fix this?? PLEASE HELP!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod touch 4th gen. will not allow me to adjust volume with my speaker, but will with headphones. How do i fix this?
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem
Apple Retail Store - Genius Bar -
TS2771 iPod touch 4th gen playback issues
Why does my iPod touch 4th gen randomly silence during playback or skips to another song
If the music plays OK in iTunes:
- Unsync and resync the music.
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod -
Will the iPod Touch 4th Gen have Siri?
Will the iPod Touch 4th Gen have Siri? I'm curious because it would be cool if every iOS device that's capable would have Siri. would'nt it be nice if they would add Siri and other more features in the next update on iOS 5? just a thought to ponder.
You are talking about Voice Control for music. It has been a feature for a while. For the User Guide:
Voice Control
Voice Control (iPod touch 3rd generation or later) lets you control music playback using voice
commands. To use Voice Control with iPod touch 3rd generation, you need Apple Earphones with
Remote and Mic, or a compatible accessory with a microphone.
François J. Perreault wrote:
I have an iPod touch 4th Gen. with the latest iOS 5 and if I hold the Home button for a bit there's a (new) voice command thingy that activates and tries to guess what I want from what I say.
Most of the time if seems to think I wanna play music though. -
IPod Touch 4th Gen isn't detected on Windows 7 Starter
Device: iPod Touch 4th Gen (lastest update)
iTunes Version: Latest Version
Operating System: Windows 7 Starter (A netbook computer)
My friend just started having this issue with his netbook where his iPod Touch will not be detected at all not even under My Computer. It will charge the device however it will not sync.
Before he had the iTunes Wifi Sync on, but it wasn't really working either for some odd reason.
On booting iTunes I noticed it kept coming up with the need to downgrade to be compatible for iTunes to run probably. I assume the latest version of iTunes cannot naturally run on Windows 7 Starter with downgrading to a lower compatiblity likely either it downgraded to Vista or XP compatibility.
I was wondering with it was an iTunes sync service was not turned on, but another friend had brought her iPhone and right away that device appeared in iTunes so it appears to be a issue with the iPod itself. We swapped usb cables in hopes that his older more worn cable may have been the issue, but still not luck.
We had used all of the following listed from this page: http://support.apple.com/kb/TS1538. As well as another which I can't seem to find that had about 15 items to try.
So basically it doesn't show up as even a usb device in the "Device and Printers" window or as a device under "My Computer".
Thanks for your time.- As asked for the versions since many users think that have the "latest" when they do not have the latest version/
- Q4: I said no that the iPod Touch 4G does not show up in iTunes/My Computer in my post. Please My question read my post.
My queston is does your iPod show up in iTunes when you conenct the iPod to another computer.
"If you connect the 4G iPod to another computer does it show in iTunes/My Computer?"
If no:
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My ipod touch 4th gen is a having a few problems with charging and turning on, my ipod comes up with the extremely low on power symbol and then i put it into my computer and it comes up with the charging symbol then it goes to the apple logo and then onto a blank white screen and then turns off and repeats that process i have tried various things including resetting my ipod trying to connect it to itunes but it doesnt come up with anything so i cant reset it on itunes and have tried various charging devices.
Tried it but it won't do anything all it does is make the screen do a very small flash of white and then continues doing the same thing appearing with apple logo then the white screen and off and keeps repeating that
I'm guessing the white small flash means it's been reset when I hold the 2 buttons down,
Thanks for suggesting. -
My new ipod touch 4th gen with ios 6 wont play soun in the headphones, but only through the speaker when my head phones are unplugged
- You do have the volume set all the way up?
- Have you tried another pair of headphones/do the headphone work in other devices?
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the headphone plug a dozen times or so.
Try the following to rule out a software problem:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
Make an appointment at the Genius Bar of an Apple store. It seems yo have a hardware problem, likely a bad headphone jack.
Apple Retail Store - Genius Bar -
My ipod touch 4th gen won't go off the settings page
Hi!
My Ipod touch 4th gen will not go off the settings page. The home button is not doing anything and neither is the lock button.
I went onto the settings page to delete some large apps as i was getting low on storage and now I cannot get off. The screen won't black out or lock.Try the remaining items of::
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
IPod Touch 4th Gen skipping and popping via USB car stereo...
I have a Pioneer AVH-P3100DVD car stereo and have the iOS 4.2.1 installed on my iPod Touch 4th Gen. Since 4.0.2 my iPod Touch has been flawless with playback. We all know the infamous 4.1 problems with the skipping of music via USB car in-dash car stereos. NOW, with the iOS 4.2.1 there is no skipping whatsoever. However, there is a lot of popping in the playback of my car stereo via USB. I've did a factory restore with iTunes and used some dust remover (air spray container) in the connector on the bottom of the iPod and also used the same dust remover on my USB syncing cable that I use in my car. Does anyone know what the problem may be? Thanks in advance.
I can't help with an answer, but i have noticed the same thing whenever i hook my ipod up to my pioneer 510-ub through the usb...all other mp3s and flashdrives work fine. the pops only occur when the ipod is hooked up.
-
My ipod touch (4th gen 8gb v4.2.1) play music but... somethings worng
Hello, so...
I bought an ipod touch 4th gen model 4 days ago. It was fantastic and so cool. BUT yesterday something happend. I collect my musics (5-6 albums - 60 songs) and synced it. The songs appear in my ipod but when i play a song, its not play from the start, only 0:10, 0:20, 0:47 etc... i don't know what happend but i dont select "remember playback position".
is there a bug, or im a beginner ?:(No... And i dont know what can i do...
sometimes its look good, no problem, sometimes everythings wrong :-\
If u find the solution pls tell me ^^ -
Ipod Touch (4th gen) freezes iTunes when sync'd.
A friend of mine has been having some problems and I have been unable to help him. He bought a new iPod touch 4th gen at the weekend (couldn't resist the lower price or wait a few weeks until the new model) running ios 6, he has just updated itunes to 10.7 but everytime he syncs it iTunes freezes during part 5 or 6 of the sync process and does not recover. His old nano (5th gen) syncs without issue, any ideas? We have tried reseting the iPod to factory setings but this will only allow the iPod to sync correctly once. When we try again iTunes freezes up. We are pretty much at a loss, it's taken the shine of his new purchase.
Thanks.From what I can recall they are preparing to or waiting for changes to be applied, I don't have my laptop to hand so I can't check at the mo. The status bar then does nothing at all, iTunes just freezes up completely. The moving arrows by the iPod stop circling and we have to use the task manager to close the program, just in case it restarted syncing we left it for about 20 mins without joy. Even unplugging the ipod makes no difference.
-
what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network
My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router. -
My ipod touch 4th gen battery only lasts for 3 hours with wifi and brightness fully down
My ipod touch 4th gen battery life if asful only lasts a maxium of 3 hours with wifi turned off and brightness fully down any suggestions?
You can try restoring the iPod. However, it could be that the battery is going bad.
Apple will exchange your iPod for a refurbished onewith a new battery for $79. They do not fix yours.
Apple - iPod Repair price
A third-party place like the followingwill rplace it for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. You can purchace a replacement battery for about $10
iPod Touch Repair – iFixit
Maybe you are looking for
-
The reason beingthat I often want to drag events into the next week so I need to have month view open. But if I can't see them in day view then its impossible to do this.
-
I am displaying a selection screen a checkbox and a select-option in the same line the code is like this: SELECTION-SCREEN BEGIN OF LINE. PARAMETERS: p_check AS CHECKBOX MODIF ID bk1. SELECTION-SCREEN COMMENT 2(9) text-100 FOR FIELD p_check. SELECTI
-
Hi everyone How to make a script for build table: col width 25mm align decimal align on close paren Thanks Teetan
-
Assign GL accounts to the product categories
Hi Experts, We are on 4.0, and classic scenario. We are facing a problem regarding finding the relevant G/L account on behalf of a product category in SRM. Example: For product category 10101500, the user should have the possibility for assigning G/L
-
hi, i created a new table from an old table using the command, create table temp as select * from orders; but the temp table doesn't contains the default values set for the columns of the old table. Can anyone help me in this regards. Regards, Aji