Voice Memos Issues After IOS 8 Upgrade

After upgrading to IOS 8 on my iPhone 5s, the majority of my voice memos are missing and the ones that remain no longer have titles or even play back on my phone.  Any ideas?
Thanks.

I was able to recover my voice memos, though the original titles are gone.
I opened my Voice Memos app like everyone else and I saw each memo quickly deleting and acting glitchy. I then connected my iPhone to my macbook so I could attempt to restore the backup I had made before the ios8 update. It said it couldn't be done because there wasn't enough room. However, when I opened my memos app again, the voice recordings were there! I can't verify if it's all of them but I'm grateful I was able to recover some.
I use this app to record lyrics on the go and I'd really like Apple to step up and fix this.

Similar Messages

  • Voice memos gone after ios 7 upgrade

    The voice memos on my phone are gone following the update to IOS 7.  Does anyone know why they disappeared and how I can get them back on the phone.  I have an iphone 5.  I backed up before the update but I do not see the voice memos in my itunes library.  Any ideas????
    Thank you.

    Yeah I have the same problem. Extremely annoying. This 7.0 looks cool but there appears to be quite learning curve for both iphone users and Apple's design and implementation staff. Any technical help would be much appreciated.

  • POE 3560 Issue after IOS upgrade

    Hello,
    I having issue where 6 WLAN AP's not coming back uo after reboot and IOS upgrade of 3560 POE swtiches - . Prior to changes here most if not all ALL the 23 Aps were mainly on one switch, Now after these changes they are now spread over three switches ( 3560's) - with 17 coming back on line
    I am sure its not the power limitation of the switch(s) as the one switch I am TS at present had a fairly large allocation of the aps attached prior to ios upgrade and reload. and the available power value now showing is applicable.for 8 AP's
    I have tried various TS steps to try and bring them back up - A couple of things I would like to try but I am restricted to do so is to check the APS physically or downgrade the ios!
    Any input on this matter would be truly appreciated.- (attached is the log buffer debug)
    res
    Paul

    c3560-ipbase-mz.122-25.SEE2.bin
    You upgraded the IOS to the switch?  I shudder at the thought of what old version did you upgrade FROM.  
    Available:370.0(w) Used:110.4(w) Remaining:259.6(w)
    You've got more than enough PoE left. 
    Only two things comes to my mind:  
    1.   Cable issue - Unfortunately, the 3560 is a non-GigabitEthernet and this particular sub-model does NOT support TDR.
    2.  Hardware failure - Read THIS.

  • Battery issue after iOS upgrade to 4.1

    I have upgraded my iOS to release 4.1. After that my battery will be empty within a 4 or 5 hours. before the upgrade the battery works more than a day.
    Another issue is to delete emails. If I delete some mails and wait a few seconds the mail will be received again. This happens with my Mobile Me account AND for my exchange account. Before the upgrade was made all works properly.
    I have tried to reset the iPhone to factory settings and make a new configuration manually but the result is still the same.
    Anyone has an idea what kind of issue I have?

    1 & 2, common problems.
    3 - check your settings
    Apple fix the bugs?  Sooner or later. 
    Good luck.
    <Edited by Host>

  • I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
    According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
    DRM audio is not effected as this is handled by the native iOS music app.
    As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
    I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view.

  • 3G icon in the status bar got disappear after ios upgrade 8.1

    3G icon in the status bar got disappear after ios upgrade 8.1

    Nginear48 wrote:
    Thanks for your quick response. I've tried everything you suggested and get only temporary fixes. Sometimes for a day or two, sometimes only until I use Safari for the first time. It's annoying and probably effects battery life between charges.
    You would think that it must have some effect on the battery, but oddly enough, the update to iOS 8 actually helped my battery life, in spite of all of these hinky little issues that are taking place. In my experience, the activity icon is not affecting the battery in a negative way.
    Another issue with IOS 8.1 that you may have seen is the loss of icon pictures on home pages. Again it seems to be Safari related, since app icons found in the App Store are not affected, only web based icons you personally put on home pages. I get what I call a test screen similar to what you used to get on old tv sets on every one of my personal icons.
    I know exactly what you mean. I got that as well. On a few of them, when I opened the websites using the generic test screen icons and then closed them, they changed back to the way that they should look. For the ones that did not change, I recreated the home screen shortcuts and deleted the generic looking ones - the test screen icons.
    And don't get me started on iBooks.
    For the very limited use that I make of the iBooks app, i haven't noticed any problems, but I rarely use the app. I don't read books on the iPad other than a few user guides and if they are pdf guides, they reside in more reliable and feature rich pdf apps on my iOS device.
    I wish that I had the fix for the spinning activity icon, but everything that I try, is temporary at best. IMO, this is the buggiest iOS update that I have seen, and I have been using iOS devices since iOS 3 on my first iPad. I realize that there are plenty of people that are not experiencing issues, but I have seen a number of weird things that I wish I could fix. None of my problems are major, but they are annoying.

  • No valid license found after IOS upgrade on C3750x switch

    HI,
    Two switches below are working fine as a stack with IOS c3750e-universalk9-mz.122-55.SE5.bin & ipbase license.
    Switch#1 (Master, WS-C3750X-24P-S)
    Switch#2 (Member, WS-C3750X-24P-S)
    After IOS Upgrade to c3750e-universalk9-mz.150-2.SE7.bin, The stack was broken. Switch#2 didn’t recognise valid ipbase license with new IOS and came up with lanbase license instead. Therefore stack cannot be composed due to license mismatch between Switch#1 (ipbase) and switch#2(lanbase).
    I’m wondering why Switch#2 didn’t recognise ipbase license with new IOS even though IPASE is running well with previous IOS.
    Here is excerpt from “show version” with 15.x image on Switch#2.
    License Level: lanbase
    License Type: Default. No valid license found.
    Next reload license Level: lanbase
    Here is excerpt from “show version” with 12.x image on Switch Stack.
    License Level: ipbase
    License Type: Permanent
    Next reload license Level: ipbase
    Thanks
    Jeong

    Thanks guys,
    I have fixed the issue by configuring  'license boot level ipbase' on the member switch#2. The switch recognised IPBASE license well and joined the stack successfully.

  • I cant hear Voice during call after i upgrade 7.1 i use iPhone 4

    I cant hear Voice during call after i upgrade 7.1 i use iPhone 4

    Hey there Goesdhar,
    It sounds like you are not getting sounds from your receiver on your phone. I recommend the troubleshooting from the followint article named:
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Increase the volume during the call.
    Make sure nothing is blocking the receiver. If you're using a protective case or display film, remove it and try again.
    Make sure nothing is plugged into the headphone jack or the dock connector.
    Check the receiver opening to see if it is clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush.
    Try another location with better signal. If the audio issue happens only when on a call, it could be due to the location.
    If the iPhone is paired with a Bluetooth headset or a car kit, try turning off Bluetooth on your device. Learn more about troubleshooting Bluetooth connections.
    Restart the iPhone.
    Make sure your device is up to date.
    If the issue is not resolved after restoring the iPhone software, contact Apple Support.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Apple iPad 3. BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Can anyone help me please.

    BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.

    All resolved at last
    Deleted the SMTP setting
    Recreated the SMTP using the same settings
    Able to send emails now
    No logic - as usual - just a bug!

  • Iphone 5 issues after IOS 8.2 update: my husband's phone and my phone get the same phone calls ONLY when we are home.  Any suggestions on where to look to fix this?

    Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home.  Any ideas on how to fix this?

    That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
    You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off

  • IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

    PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore.  Just get an Apple Logo then a flashing blue screen as if it is caught booting up.   This has happened twice before and iTunes restore fixed it.  But this time device not appearing in iTunes.
    Running iTunes for PC.  But as stated restore has worked before!  Any help greatly appreciated!!

    Place the device in DFU mode and let iTunes restore the device to factory condition.

  • Performance Issues after an Upgrade

    Hello!
    We are experiencing performance issues after we upgraded to a new version of Hyperion (11.1.2.1). At this point, I am not too sure about the actual causes for this degrade in performance but I am trying to narrow down the causes and need your inputs. Please help me with your ideas.
    1) What could be the causes/factors for the performance to degrade after an upgrade?
    2) Does the performance of a script depend on the user credentials i.e. who is launching the script? Whether it’s the super admin of the application/application owner or an application specific admin?
    3) Does the performance of the scripts depend on the place you are launching it from? For example - will the performance differ if it’s launched from MaxL Vs EAS?
    Please let me know your thoughts on this.
    Thanks,
    - Krrish

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • Performance issues after iOS4 upgrade

    hello everyone,
    I had notices few issues after I upgraded my iPhone 3GS:
    1- The screen is not rotating (when reading e-mails of flipping photoes).
    2- The resolustion has decreased big time after the upgrade. Now the photos are shown in less resolution and they look hazy.
    3- my Ipod is not working.
    4- I could not restore my device via the itune.
    my big question is there a real tangible benifit for this new upgrade?
    I really appreciate if you can help me soon
    thanks.

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • After ios upgrade to 7.0.4 i got power botton and no sim problem need help      help

    after ios upgrade to 7.0.4 i got power botton and no sim problem anyone having this problem?

    Installing an iOS update does not add a physical button.
    As for the "No SIM" message, try removing and reinserting the SIM or replacing the SIM.

  • Airplay issues after IOS 8  upgrade

    After the latest IOS 8 upgrade I have a lot of issues.
    Both my ipad and iphone are upgraded to IOS8 and after that I can't stream video to my apple tv, you can see that airplay is tries to connect to my apple tv but returns to the ipad/iphone screen after ~5 seconds. Besides of that both devices also have streaming difficulties to my B&W a7 speaker, problem with this one is that it will stop after 15 minutes and to get is working I have to restart the device.
    With IOS 7 I didn't have problems at all.
    Do others also have this many problems and what can I do about it?
    I already tried:
    - Restart ipad/iphone
    - Closed all active programs via the home button
    - Power cycled apple tv / remote speaker
    - Reset ipad/iphone (power + home button)
    - Re-install all related apps (remote, B&W, video streaming apps)
    - Reconnected to my home network
    Since I didn't have a problem before the upgrade and this occured on 2 devices after the IOS 8 upgrade, I would say this must be related to the upgrade.
    Hope someone can give me an advice.

    I was able to recover my voice memos, though the original titles are gone.
    I opened my Voice Memos app like everyone else and I saw each memo quickly deleting and acting glitchy. I then connected my iPhone to my macbook so I could attempt to restore the backup I had made before the ios8 update. It said it couldn't be done because there wasn't enough room. However, when I opened my memos app again, the voice recordings were there! I can't verify if it's all of them but I'm grateful I was able to recover some.
    I use this app to record lyrics on the go and I'd really like Apple to step up and fix this.

Maybe you are looking for

  • Error While Doing GR "Check table YMSEG:"

    I am getting following error while doing GR for sales set  article 303387. Check table YMSEG: entry 303384 0001  does not exist Sales set header 303387 sales set Component 303384 & 303386. can't find any issue with the article (material) setup

  • Itunes wont install on vista, No digital signature

    I had a problem were Itunes would not update or anything Apple related (quicktime etc) so i deleted Itunes and tried to run it as a fresh copy. Yet when i download it and try to run the application i get the box from windows asking me if i want to ru

  • PO requisition and Purchase order

    hi Experts Just i want to know when u raise Po requisition manually or automatically ..before approving i need to know on hand quantity how i can know in requisition form? and when i am going to approve purchase order just i need to know the quantity

  • Unit KG is not Created in language EN-- Error in MMBE

    Dear Guru, When i am running MMBE to verify the stock, system showing the stock as per parameters givien for Unit of Messasurement ( ex. EA.) After Executing the report, at header level when i am chaing Unit of Messasurement  ( Ex. to KG) system givi

  • Help!! serious problem with my zen mi

    help.......my zen cant power on, when i try to power on/reload firmware/format/clean disk.......whatever i do my player also <FONT color=#333333>freeze...can anyone help me . <FONT color=#333333> <FONT color=#333333>note:there are no more warranty le