Voice memos on first gen. nano?

I know woice memos can be used on the second gen. but is there a way to use them on the first gen. nano?

As far as I know, no it's not possible.
Unless I am very much mistaken, the first gen nano software does not suuport this.

Similar Messages

  • Voice Memos on 5th gen ipod

    Hello,
    I have a 5th generation iPod.  I recorded some voice memos and put them onto my iTunes, where they played fine.  Then I tried to put them onto my iPod later, and while my iPod is connected to the computer, they show up as songs on my iPod, but once I disconnect the iPod, they no longer show up.  Does anyone know why this would happen and how I can fix it?
    Thanks!

    iPod Nano 5th Gen. User Manual

  • How do you get the voice memo app on a nano I purchased today?

    I purchased a nano today, in the shop it had a voice memo app on but mine doesn't ?

    you need to plug in a microphone. If you have headphones with a built in mic like the ones that come with an iPhone, those should work.

  • Voice memos disappear off iphone 4 & ipod nano 5th after syncing to mac

    hi. i record voice memos on my ipod nano 5th gen and when i sync the nano to my mac they are in itunes on my mac but not on my ipod anymore. they completely disappear from the nano. there is a v.m. playlist i can see on itunes for the ipod but they are grayed out and do not show up at all on the ipod. i can play them on my mac though. since i would like to have my v.m. on a portable device i tried copying them from itunes on my mac to my iphone 4 and have had strange results. sometimes it works sometimes it doesn't or a few will copy. the playlist doesn't copy to the iphone at all but if i go to the v.m. app on the phone a few will be there. help! how can i get my v.m. that are now all on my mac to one of my portable devices? thanks in advance.

    nevermind. somehow now they are showing up in a music playlist on my nano. not sure if i just missed that as i was looking under extras > voice memos and not music playlists. i'm a happy camper now.

  • Transferring Nano 6G voice memos to iPhone 4?

    I have the latest iTunes and ios versions. Nano 6g and iPhone 4 on iOS 5. PC on windows vista home premium.
    I need to transfer the voice memos recorded on the Nano 6G to my iPhone 4 voice memo recordings folder.
    I have synced the nano and it's voice memos have been automatically transferred to a music playlist and removed from the nano Voice memo recording folder. All my previously synced iPhone 4 voice memos are now in the nano playlist. iTunes has created 2 voice memo folders. One folder has triplicate voice memo files! And all the nano voice memos are now on a playlist on my iPhone. And now when I try to sync my iPhone, iTunes gets hung up on step 6 of 6 that says waiting for files to copy. There is now 8gb of "other"  on my iphone as result of several unsuccessful sync attempts.
    Problem is I need the all the voice memos from both devices on my iPhone 4. Cherry creek Genius' are not helpful and most, if not all, didn't know The Nano 6g had voice memo recording capabilities.
    Someone please help!!!

    Voice memos are synced to the computer through iTunes. From there you can do whatever you want to from there.

  • HT1414 I have a nano the old one or first gen as y'all call it.  With the new itune program I am unable to purchase songs. It ask for security questions I just do not remember any of it.  I owned on 3 cars, I have been in only two states, I had only 3 job

    I HAVE A FIRST GEN NANO, WITH THE NEW UPDATE TO ITUNE PROGRAM I AM UNABLE TO PURCHASE MUSIC.  I DO NOT REMEMBER SECURITY QUESTIONS. I HAD ONLY 3 CARS, LIVED IN ONLY 2 PLACES AND HAD ONLY 3 JOBS. THE SERIAL NUMBER IS NOT ON FILE AND WAS TOLD THAT I HAD TO PAY FOR SERVICE.  I HAVE MONEY ON MY ACCOUNT AND WOULD LIKE TO KNOW HOW TO GET IT BACK.  I DO NOT WANT TO BUY ANOTHER DEVICE FROM APPLY. HELP PLEASE

    Click here for information. If you can't get the answers emailed to you for some reason, contact the iTunes Store staff via the link in that article.
    (75684)

  • Nano first gen replacement program

    With the replacement program what do you get? Another first gen Nano? A newer model perhaps? Or do they just replace the battery?

    Here is a video on youtube which demonstrates the return process of your original Nano:  http://www.youtube.com/watch?v=yo4Lg0ToVlU .
    Apple's customer care representative shared with me that they are putting the 1st generation Nano back into production for a limited time so it is not likely you'll get the newest Nano.

  • Voice memo icon

    The voice memo icon on my nano seems to disappear and reappear at will. It's weird, I'm not too worried about it cuz I seldom use voice memo. I think it might be a glitch, I've restored and it still happens.
    This happening to anyone else?

    Not entirely true. If you once made a recording and saved it and then plugin headphone without a mic, the voice memo app still shows up, so that you can listen to your recordings.

  • 2nd gen nano not recognized by XP or iTunes

    Situation:
    2nd gen nano with Nike+ will not appear in Device Manager nor charge. In essence, the XP pro computer does not see the nano at all. However, Nike+ still works, the nano still works in an iHome clock radio and it will beep when connected to a dock.
    Troubleshooting:
    * 5Rs attempted - however, since the PC Device Manager will not see the nano, I can't issue any restore commands.
    * even with nano in disk mode, PC does not see it
    * older first gen nano still works properly with same iTunes environment.
    Has the USB on the newer nano gone bye-bye?

    Start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Cheers,
    Patrick

  • Problem Updating 1st Gen Nano software from 1.2 to 1.3

    Try this as a separate thread...
    I have a first gen nano with software version 1.2 (from the 6-28-06 update) and when I plug it into my usb port, i tunes 7.0.1.8 launches to sync. This is as it should be; however this action gives a prompt to update from version 1.2 to 1.3, which I wanted to do.
    The problem is that after a short while, I get a message that state that the nano can not be updated because some of the files on it are being used by another program. This is not true as best as I can , other than itunes itself being open.
    Any help with this problem would be appreciated...

    Hey, tampa!
    That's something I was going to mention, if the other suggestions didn't help.
    Try this:
    Go to Task Manager.
    Under the Processes tab, end "iTunes.exe". unplugg all the other USB devices from your computer, reset your iPod (hold the Menu and center buttons together for 7 seconds), then connect it again.
    Then, I was also going to say that this could be drive letter confusion in Windows. Have you tried assigning your iPod a different drive letteR? try these steps:
    Log off of any other users on your computer.
    1 - Don’t plug in your iPod yet.
    2 - Go to "START -> Control Panel -> Admin Tools (if you don't see this, click on "classic view" button on the left panel) -> Computer Management."
    3 - Click on the "Disk Management" button in the left panel area.
    4 - Now, with "Computer Management" and Control Panel windows opened, reset your iPod, and connect it.
    5 - Right-click on your iPod's listing there (after a few moments when it gets recognized in this drive window), and click on "Change Drive letter and Paths". Then the "Change..." button.
    Here's what it should look like:
    Assign your iPod the letter "M" "N", "O" or the like (further along in the alphabet).
    For more details, see this article:
    Windows confuses iPod with network device / Changing drive letter
    We'll see what happens with this..
    -Kylene
    If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

  • My 1st gen nano wont connect at all to my mac! help!

    So I recently recieved my friend's 1gb first gen nano. Whenever i try to connect it, the "do not disconnect" symbol comes up, yet doesnt blink, and the backlight doesn't go off. not only that, it wont come up at all on Finder or iTunes, ot anywhere else. does anyone have any advice??

    I am trying to fix my friends ipod 1st gen nano also with the same exact problem, do not disconnect symbol, backlight stays on, does not mount on desktop or in dick utility. I have reset it, also reset all the settings too in the ipod menu. using a mac pro that I have used many ipods on so not sure on this one. cable is good since it works with my girlfriends ipod, same gen.
    Any help on this subject would be nice! Thanks all!

  • Voice memos in ios 7: lengths not set at first

    Hello;
    I intended to write this as a question about what happened to an important voice memo that
    I recorded yesterday, but going through what I did yesterday leads me to believe that I actually
    deleted it because I thought it was empty.
    I just upgraded to ios 7 on my iphone 4.  Yesterday was my first experience using the new
    voice memo app.  It is my practice to record audio of class meetings and then the post an
    mp3 file to the cloud.  At the end of class, I noticed that a voice memo had been recording as
    I expected.  I don't recall if I paused recording then hit "Done" or hit "Done" directly.  A dialogue
    box came up:
    > New Voice Memo
    > Enter a name for this voice memo
    > New Recording
    > Cancel OK
    A student asked a question and I had to leave the room, so I didn't complete the step of naming the file
    then.
    Later, I noticed a recording of zero length (0:00:00) which I thought had gotten created inadvertently
    (that seemed to be easy to do in the previous version of voice memo, so I didn't think much of it).
    I deleted that file.  The question remained what had happened to my recording (of about 75 minutes).
    As I tried to recreate my problem now, so I coud write it up accurately, I realized that all the voice memos I
    created are shown as 0 length when they first appear on the list of recordings.  As I tried this a few times,
    the delay in changing the length from 0:00:00 to the correct length did vary... from almost
    instantaneously up to a couple of seconds (I don't know if it depends on the length of the file: the longest
    I tried now was about 30 seconds).
    For what it's worth, the zeros should not be displayed at all.
    Best regards,
    Daryl

    i have managed to work out what this issues is being caused by please head over to my blog, but apple needs to fix this up properly.
    http://www.thesuperkev.com/2013/10/ios-7-memo-0000-fix.html

  • Voice memo playback low volume, ipod touch 4th gen bluetooth

    After recording a voice memo on my ipod touch 4th gen.  I play it back on my bluetooth JBL flip.  Now when I playback sound levels are sometimes extremely quiet, and other times play at normal volume.  Volume on Ipod touch and JBL flip will be maxed out and still volume playback are extremely quiet.  I have tried turning off and on Ipod and not found anything work consistently at solving this issue.

    Do you have a Phone? In your case i would save some money for an iPhone. Like i am doing now - i also got a 4G iPod.
    Anyways if you really wanna go for another iPod, take the 5G now. The 5G is a big update from the 4G and Apple released it last year, so i think that the 6G will come in 2014.

  • Pressing "shuffle" on my 7th gen Nano will only randomly pick the first song, then repeats it over and over. How do I get "shuffle to work properly?

    Pressing "shuffle" on my 7th gen Nano will only randomly pick the first song, then repeats it over and over. How do I get "shuffle to work properly?

    Is "REPEAT ONE" highlighted. If it is, touch it to de-select. Cheers!

  • I found an ipod nano first gen and cannot restore it

    I found an old ipod nano first gen and and when i turned it on it said connect to itunes and i did i downloaded the version of this ipod and when its about to start the restoration process it stops and says "couldn't restore ipod in use". I have tried to do the disk mode thingy but it didn't help at all. How can i fix this.

    Did you do anything at all to return it?
    It is probably not repairable. You can use this: http://www.apple.com/support/ipodnano_replacement/

Maybe you are looking for

  • Can't apply AP credit for freight only

    It is sometimes necessary to enter an A/P Credit Memo for freight only.  This has been doen by entering a service-type credit memo, with nothing in the rows but an amount in the Freight section of the footer.  Then this credit memo can be selected al

  • Need Help about Certificate based Authentication

    Hi friends.. Currently, i'm trying to develop an applet that using Certificate Based Authentication.. i have looked at this thread : http://forums.sun.com/thread.jspa?threadID=5433603 these is what Safarmer says about steps to generate CSR : 0. Gener

  • Automatic start dbconsole

    Hi all, I'm working with a two nodes RAC with 11.2 Enterprise edition All is running fine but, when I restart one of my servers, the dbconsole don't start automatically and I've to start it manually with emctl start command. How can I configure it to

  • Windows 8.1 Lost Sign in Options

    Hi, So I have a Dell Venue 11 Pro that I am working on.  It has a built in fingerprint reader and that has worked fine for a couple of days.  However all of a sudden this morning I lost all the sign in options with windows.  I can still set them up u

  • No memory available

    Hi, I came across an error that seems simple but I cant solve the issue. I could'nt pull the startup config from an AP via Cisco works so I connected to it and tryed to do a show startup-configuration. But when I did this, the following error occurre