Voice over came on and now is says my password and xyz and tells me it is disabled...how do I fix this..HELP!!!!!! It is an iPhone 4

I was talking on my phone earlier and voice over came on and started telling me my password back to me and now it won't let me get on it. It is telling me my password is wrong. How can I fix this? HELP!!!!!

did you check if the settings are the same as the one who works ?

Similar Messages

  • I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

    I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

    Reinstall OS X:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • I deleted adobe and now files won't open with preview automatically like they use to. How do I fix this?

    I deleted adobe and now files won't open with preview automatically like they use to. How do I fix this?

    I think you solved my problem! Upon following your advice, I first got a message that I had not allowed a connection to the Tax dept computers, which would prevent the file I need to fill out from being e-filed. I proceeded to then open the file at the top of which was a security banner at which I chose the site as safe. I then filled in the first line of the form which autofilled other lines telling me I was connected with the tax site. In a few days when I have the data I need, I will actually attempt to file the return. If there is a problem, I will send another message. Thanks so much for your assistance!

  • I just updated the software on my iPad2 and now it's asking for my passcode but I never set one. How can I fix this?

    I just updated the software on my iPad2 and now it's asking for my passcode but I never set one. How can I fix this?

    I fixed it!!
    While not connected to any USB cable I put the iPad in recovery mode.
    To do that turn the iPad completely off. Press and hold the home button while turning the iPad on, once you see the apple logo release the home button.
    Turn on your OS X mac after it boots up connect the USB from iPod to Mac. iTunes should start. If not launch itunes.
    Perform the factory restore process paying attention to all of the screen message windows. Then set up the ipad like it was new.

  • IPhone 4 updated from 6.0 to 7.1.2 and now the picture no longer appears when receiving or making phone calls.  How do I fix this?

    I updated the software for my iPhone 4 from 6.0 to 7.1.2 and now pictures (contact picture/picture ID's) no longer appear (take up the entire screen) when receiving or making phone calls.  They only show in a small circle which is not convenient at all.  How do I fix this, please?

    You are welcome. I have seen numerous posts on this subject, so I suspect you are correct. It doesn't seem like a welcome change. You can send feedback to Apple at http://www.apple.com/feedback/iphone.html

  • I changed my Apple ID password, and now my iCloud won't let me sign in on my Mac. How do I fix this?

    I changed my password for my Apple ID yesterday for security reasons (I change all my passwords every 2 months). I can log into iCloud on the internet to check my mail and my calendar plus I was able to change my password on my iPhone so it can still sync. However, my mac keeps rejecting my new password and won't connect. So I deleted the account off my Mac, and now when I'm trying to re-add it it keeps saying "You can't sign in at this time". Is there a glitch in the system? Is anyone else having the same problem?

    ryanofearth
    Jan 12, 2012 2:42 PM 
    I changed my password for my Apple ID yesterday for security reasons (I change all my passwords every 2 months). I can log into iCloud on the internet to check my mail and my calendar plus I was able to change my password on my iPhone so it can still sync. However, my mac keeps rejecting my new password and won't connect. So I deleted the account off my Mac, and now when I'm trying to re-add it it keeps saying "You can't sign in at this time". Is there a glitch in the system? Is anyone else having the same problem?
    MacBook Pro, Mac OS X (10.7.2) 
    I have been having the exact same issue for the last 2 months. has anyone got a fix for this? i also found that my App store will not connect???
    this is sooo frustrating!!! APPLE products are not supposed to  be like this! why does'nt Apple FIX IT!!

  • I recently purchased an ipad and downloaded apps.  They now all say "waiting" under the app icon but I'm connected.  How do I fix this?

    Anyone have an answer for this?

    I faced this problem sometime ago.
    If you let it download thru' the night, it should be completed by morning.
    This "Waiting" problem will disappear after a few days.
    I cannot explain why it happen.

  • HT1923 I had to restore my computer and had to reinstall itunes. Now when I try to open itunes I get a message saying it is a new version than my itunes library. How do I fix this?

    I had to restore my computer and had to reinstall itunes. Now when I try to open itunes I get a message saying it is a new version than my itunes library. How do I fix this?

    Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

  • Updated my MacBook now it says my password is wrong and won't let me log in?

    Updated my MacBook now it says my password is wrong and won't let me log in?

    Have you tried booting off the Installation DVD then dropping into the Utilities to Reset Password? It may have got corrupted, just set it back to the one you are familiar with.

  • During the io 5 update process, my iphone 3gs froze and now will shut off and turn on by itself, and will not allow me to unlock the phone or do anything with it. how do i fix this?

    during the io 5 update process, my iphone 3gs froze and now will shut off and turn on by itself, and will not allow me to unlock the phone or do anything with it. how do i fix this?

    Follow the instructions here > http://support.apple.com/kb/HT1808
    You may need to try a few times to get it to work

  • Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

    Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

    Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

  • A renter used my Apple TV to access Netflix, and now I can't log him out.  Besides calling the renter to ask him to fix this, how do I fix this?

    A renter used my Apple TV to access his Netflix movies, and now I can't log him out.  Besides calling the renter to ask him to fix this using his Netflix.com account, how do I fix this?

    There is no option in Apple TV to log out of Netflix.  The internet tells me to go to netflix.com to "Disconnect from All Devices".  I can't because I'm unable to log in to a renter's Netflix account.
    Why is there no option to log out when using Apple TV?  I can't ask my next renter to reset my Apple TV each time.
    jd

  • IS IT IMPOSSIBLE? My iTunes library says 4149 songs, my iPhone says 4148 songs, and my iPad says 4147 songs.  Why don't they match?!  How can I fix it???

    My iTunes library says 4149 songs, my iPhone says 4148 songs, and my iPad says 4147 songs.  Why don't they match?!  How can I fix it???

    Yes. I selected all songs and checked them (in case I missed a few) and synced.  I have also tried uninstalling iTunes and reinstalling it.  I tried selecting all songs and unchecking them, re-syncing my phone (which didn't get rid of the songs on my phone like i thought it would), then selected all songs again, checked them, and resynced again--nothing changed.  I went to the iTunes store and selected "Check for all available downloads" and it gave me the message"All purchases have been downloaded for this account."  I checked for duplicates, deleted a few and resynced.  This reduced the number of songs, but it still doesn't match what the iTunes library says...I don't know what to try next...

  • I was trying to download latest version of itunes and my computer is saying software requires mac os x 10.6.8 or later. how do i fix this

    i was trying to download latest version of itunes and my computer is saying software requires mac os x 10.6.8 or later. how do i fix this?

    The latest iTunes which is 10.7 does indeed require Mac OS X 10.6.8 or newer. What version of Mac OS X are you running and on what model Mac?

  • My daughter has forgot her password for her ipod and its now disabled how do i fix this??

    my daughter has forgot her password and now her ipod is disabled, how do i fix this??

    If you cannot remember the passcode, you will need to Restore the device...
    1)  Connect to iTunes on the computer you usually Sync with and Restore...
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • I restored a Macbook Pro from a Time Machine backup and now none of my passwords are working (and I know they are the correct passwords).  What can I do?

    I restored a Macbook Pro from a Time Machine backup and now none of my passwords are working (and I know they are the correct passwords).  What can I do?

    First, make sure caps lock is not on.
    Another reason why the password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. You can select one of the available layouts by choosing from the flag menu in the upper right corner, if it's showing, or cycle through them by pressing the key combination command-space or command-option-space. See also this support article.
    If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password. In OS X 10.10 and later, this option also works with FileVault, but only if you enabled it when you activated FileVault. It's not retroactive. Otherwise, see below.
    Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.
    Start up in Recovery mode. When the OS X Utilities window appears, select
              Utilities ▹ Terminal
    from the menu bar at the top of the screen—not from any of the items in the OS X Utilities window.
    In the window that opens, type this:
    resetp
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
    Select the startup volume ("Macintosh HD," unless you gave it a different name) if not already selected. You won't be able to do this if FileVault is active.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select
               ▹ Restart
    from the menu bar.
    You should now be able to log in with the new password, but the Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as the login password), there's no way to recover it.

Maybe you are looking for

  • How can I tell if HD is set up for RAID?

    I received an external Western Digital 4TB drive with some files on it and I'm trying to tell if the drive is already set up for RAID or not. The company I received it from couldn't tell me and according to the WD box, it's "pre-configured for maximu

  • Ipod rocongnised by windows but needs Formatting??

    ok, i have my friends ipod nano... and i have windows XP home... she has about 70 songs and when you click on Settings>about it is not written: Fromat windows as MY ipod video does... she also has ipod version 1.0 so when i plug it to my computer...

  • Can You Disable A PDF Form After X (days or openes)?

    Is there any way to disable a PDF form after X # of days or X # of openes? Here's my situation: I have a time sensitive document that needs to be filled it out and printed within 72 hours from receipt. After 72 hours the form is no longer valid and m

  • How do I get the number of new RSS articles to show in the bookmark bar?

    I have Apple as one of my Bookmarks in my Bookmark bar. On my eMac at school, whenever there was a new Apple Hot News article, I would get a number next to my Apple that would let me know there was new Apple News. I can't figure out how to set that u

  • What is this that shows up in submitted forms?

    This is what shows up in my database when a user submits a form. I have changed the links from http to hxxp, just in case: First name:cpezcxuqaa Last name:cpezcxuqaa Can we contact you?:NO Email:[email protected] Address:xWPfxw <a href=\"hxxp://ailmv