Voice Over: How to set Recording Range in Target ?

Hi guys,
I need help on Voice Over. I have been doing Voice Over without problem.
But now I need help bcos I stumbled upon a new & irritating problem.
QUESTION 1:
When I select Voice Over, I cannot click the RED button to start recording because at the Audio File in Target (just the above the space we are supposed to type the filename), it says:
"No Recording Range set"
Previously, it automatically select A1, A2, A3 or A4 at random but this time it didn't and instead it says "No recording Range Set".
What happened to system ?
QUESTION 2:
How do I specifically set it to output to a track of my choice ?
Thanks

Thanks Ian & Tom for the well explained answers. Now I understand.
But I got another sub-problem.
Like Tom says, it will create another track if there is not enough room. But what I did is slightly different.
Ok, here is what I did. Not wanting to disturb the position of the rest of the voice-over clip, I locked all the audio tracks.
When I did a voice over, it push down a3 to a5, and a4 to a6 so I have two new unlock audio tracks in a3 and a4 where the system placed the voice over clip. When I finally put the voice over clip the the correct position in a5 and a6, I ended up with 2 blank audio tracks.
How do I delete these audio tracks ? I tried right-click and select delete track but the empty tracks remained there.
How do I delete the unwanted tracks, then ?
Thanks

Similar Messages

  • Voice-overs: How to *automatically* remove breaths, clicks; improve voice?

    Hi, i edit voice-overs for tutorials (not commercials) in Audition CC 2014. I know how to manually edit out
    - breathing, inhalation (just ahead of a new sentence)
    - clicks
    I've read some and tried some, but still don't know how to
    - edit out breathing *automatically*
    - edit out clicks automatically
    - do "fade out – almost silence – fade in" automatically
    - give more substance to my voice with a filter
    When editing out breathing manually, usually i replace breathing by "silence" (don't simply cut it away). But sometimes i would like to replace breathing by "fade out – almost silence – fade in", which sounds more natural. I can do this manually (and assigned keys F1, F2, F3 to the three commands); but can i do "fade out – almost silence – fade in" automatically?
    My initial recording is not too bad, but i want to give my voice a little more "substance". I tried the recommended "Broadcast" filter, but it sounds to flashy and aggressive. There is another filter called "Male Voice" (or some such), but it seems not to change anything.
    I also wonder: If i
    - use a filter
    - edit clicks and breathing manually,
    should i apply the filter before the manual editing? I think i should, because breathing and clicks sound different after filter and shoul be judged with filter applied. But then – if i decide to remove the filter, it would be better to apply it at last.
    So here are my questions:
    - Is there a controlled way to remove breathing and clicks automatically?
    - Which filter gives my male voice more substance without "blasting"?
    - How to "fade out – almost silence – fade in" automatically?
    Thanks!

    Steve, thanks for more good advice including positioning of the mic!
    I am just an amateur - a text writer who was forced by ruthless customers to not just produce manuscripts, but also video tutorials, w/out knowing how to, but wishing not to sound as "garage" and "panting" as many others on YouTube (apart from "verbose"). So for my "productions", i write, speak and edit all in one.
    The microphone is a USB Blue Yeti, which looks roughly like a tabletop lamp. It seems popular. I set it to one-directional recording (only front direction.) I have tried about ten different mics, including even more expensive headsets, but i get the rather most consistent results with the Yeti. I also use a windshield (got better recordings after starting to use it) and for recording, i build some kind of tent with woollen blankets on top of a table (so that i can stand upright and talk in a "muted" space). Before and while talking, i will drink buckets of warm water or herbal tea perhaps with fresh lemon, nothing cold, no coffee/black tea/dairies; i've experienced this helps. I've still to understand how to harrumph best.
    On the laptop used for audio recording i can't run Audition, but i record with the freeware Audacity (is that audacious?), save as .flac and edit on a different PC in Audition.
    On the expensive headset microphones i tried, i heard more breathing and – to my surprise – more up and down in volume. I have some, but less, variations in volume also with the Blue Yeti files; so sometimes in Audition i have to change a single sentence by 1,5 or 2,5 dB. I wish that could be done automatically, but perhaps it can?
    Previously you also said that breathing is natural and should stay in the audio. I don't want to fully keep the breathing in – that might be ok for some emotional music or movie, but not for tutorials. But i'd prefer to lower rather than fully suppress breaths; that's why i asked for automatic "fade out – almost silence – fade in". I can do this by selecting three different bits of audio and then select three different commands (now by keyboard shortcuts). But it's too much clicking and i might simply glue silence over most of the exhaust sound.
    I've also tried to wear a headphone during voice recording, closed as well as open headphones. It confused me no end, i was literally speechless (very unpro i guess). But i connect external speakers to the recording laptop and check on results immediately (and keep an eye on the volume levels in Audacity).
    I will print your instructions for microphone positioning and try to follow them exactly next time. But i wasn't much off anyway.
    Thanks again!

  • Screencasting with audio voice over, how?

    I want to use QT to create a screencast tutorial, but need it to record my voice, too. Any way to do that with the free or pro version? (Using OS 10.6)

    Found a post that could help
    Re: Adobe Edge - How to voice over syncing with time-line animation in adobe edge ?
    Thanks,
    Preran

  • How to set the Range size dynamically in an Iterator?

    Hi,
    One of my scenrio, i read the range size of Iterator and i performed the business logic validation. But in my case, range size is changed as per business requriement for a paricular Iterator.
    Is it possible to set the Range size property dynamically in an Iterator of pageDef File.
    I'm using JDeveloper 11.1.1.3.0
    Can anyone help me regarding this???
    Thanks & Regards,
    Perumal S

    Good afternoon,
    This works: f?p=1:#MYPAGENUMBERCOLUMN#::Session:Request:Debug:Clearcache:itemname:itemvalue:printerfreindly
    It works very well. I have been struggling for a couple of hours trying to figure out how to calculate the page number I wanted to link to from a report column defined as a linked item. I ended up modifying my VIEW to include the page number for that particular type of data and use this technique to jump to the correct page.
    Thanks for posting this. Nothing else seems to work.
    Don.

  • How to set input range to 100mv

    I use AI_configure(....) to set input range.And i want to set input range to 100 mv .How should i do.
    Please tell me..........my DAQ is PCI MIO 16E-4

    You will need to set the gain of each channel using the AI_Read function. The input range parameter of AI-Configure is acutually ignored for E Series devices. The polarity parameter will allow you to set the range to unipolar (0 to 10 V) or bipolar (-5 to +5).
    You use the gain parameter of the AI_Read to futher specify the input range. The valid gain settings for the 16E-4 can be found on page A-2 of the appendix in the user manual linked below. For a +/- 100 mV range you would set the polarity of AI_Configure to bipolar and the gain parameter to 50 of the AI_Read. I hope this helps.
    PCI E Series User Manual
    http://digital.ni.com/manuals.nsf/webAdvsearch/06F1C9FB0D0BA5C286256C010057461B?OpenDocument&vid=niwc&node=132100_US
    Regards,
    Todd D.

  • How to set record history for a customized form?

    i have created a customized form and register it onto apps. everything is working fine expect for the Record History part. while going to Help -> Record History for my customized form it showing error message -
    Recird History is not availbale here.
    Please suggest if i have to write a specific trigger for setting the record history. also please provide the sample code for the same.
    Thanks,
    Sam

    Sam,
    Please see if these threads help.
    How to enable record history for custom forms
    How to enable record history for custom forms
    RECORD HISTORY (or) WHO COLUMNS in R12???
    RECORD HISTORY (or) WHO COLUMNS in R12???
    Regards,
    Hussein

  • Voice over: How do I read text? If the VO-Shift-Up and then VO-A don't work?

    Hi,
    All the Voice Over posts say stuff like
    When you get to a "Text Content" or "HTML Content" box, you have to "interact with" it by pressing Ctrl-Option-Shift-Down Arrow. If it doesn't immediately start reading, press Ctrl-Option-A."  (quoted from Archie's post)
    and tell you to take the tutorial. 
    I've taken the tutorial. 
    For non-web documents-- my students .doc file and .pdfs which I need to read--  pressing Ctrl-Option-Shift-Down Arrow, followed by press Ctrl-Option-A. just doesn't do anything. 
    What am I doing wrong.   This is urgent as I am a professor, I need to get grades in and I can't see to read anymore!
    Thanks,
    -jr6g

    Really? No one has an answer?  I can't think reading .doc and .pdf files are beyond what blind users can reasonably expect to do on a Mac. 
    My workaround is converting to HTML, but that's inadequate long term. However, if no one else posts anything perhaps the moderator will give me 10points for answering my own question.
    Thanks!
    -jr6g

  • How to set the camera behavior target ?

    Hi, guys:
    I am sorry to aks this quesion. I know it must be very basic quesion, but I have been search the anwser for a while.
    I don't know if it's wrong key word or what, but I just can't find my way to setting the camera target.
    I want to use the camera behavior, but the target is none, and I just don't konw how to set the target to the object I want.
    Is there anynone can help me with this newbie quesion? Or give me a direction to read?
    Thank you for your time!

    aa33002 wrote:
    Hi, guys:
    …  and I just don't konw how to set the target to the object I want.
    just drag the target/object into that tiny square ...
    but your project actually doesn't list any target-objects.
    or should the word 'target' be the target?
    than drag that into the tiny box .....

  • How to set recording levels?

    I am recording electric guitars using small amps and Shure 57s and 58s through an Alesis MultiMix 8 FW. I'm looking for advice on setting the levels between the gain and level controls on the mixer and the level controls in GB. Should I set GB levels high, (maxed), and control it with the mixer, or set the mixer just below clipping and adjust with GB. Any suggestions would be appreciated.

    Settings --> Sounds

  • Help with portforwarding, how do set a range with the M1424-WR Rev.F?

     Am trying to portforward Call of Duty: Black ops 2, and it's giving me a headache. Portforward.com says the REV.f won't forward ports, I can only DMZ( which I obviously won't do), so I'm following the M1424-WR instructions(http://portforward.com/english/routers/port_forwarding/Actiontec/MI-424-WR/Call_of_Duty_-_Black_Ops_...
    Since I only have an input box( the instructions for the different model gives two input boxes to set range) I simply copy pasted " 4379-4380", am unsure if it recognizes it as a range.

    heizenbrg wrote:
     Am trying to portforward Call of Duty: Black ops 2, and it's giving me a headache. Portforward.com says the REV.f won't forward ports, I can only DMZ( which I obviously won't do), so I'm following the M1424-WR instructions(http://portforward.com/english/routers/port_forwarding/Actiontec/MI-424-WR/Call_of_Duty_-_Black_Ops_...
    Since I only have an input box( the instructions for the different model gives two input boxes to set range) I simply copy pasted " 4379-4380", am unsure if it recognizes it as a range.
    Why not just put in 2 port forwarding rules?  one for 4379 and the second for 4380.  just make them a user defined protocol.
    I saw the comment at portforwarding.com - sounds ridiculous to me - The MI424-WR_Rev.F will not allow you to forward enough ports, to run Call of Duty - Black Ops II
    Even if they don't allow a range there can't be a reason they don't allow a seperate rule for each port.
     Here's the link to the user manual for the router
    http://support.actiontec.com/doc_files/MI424WR_Rev._E&F_User_Manual_20.10.7_v1_GPL.pdf
    you need section 6.4  pretty useless manual too

  • How to set Date range for a input parameter in a report

    Hi,
    I have 2 parameters start and end date. I want users to select the end date only 3 days from which ever start date they select. How to achieve this in parameter validation in SSRS?
    Thanks,
    Preetha

    Just make default value of Enddate parameter as below
    =DateAdd(DateInterval.Day,3,Parameters!StartDate.Value)
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Double tap and voice over, how do I disable?

    I have to hold my finger on whatever I want to use to "highlight" it and then double tap it to get it to open.  When this happened it also won't allow me to scroll down or up any more.  This also applies to my kindle app.  I can't turn the pages anymore.
    As if this weren't frustrating enough a day later Siri now tells me EVERYTHING that comes up on the screen like I'm a blind person.  How the **** do I get these things off?  I tried asking Siri a bunch of different ways to disable but I don't know the correct wording.

    You turned VoiceOver on.
    Settings> General> Accessibility> turn VoiceOver Off.

  • How to set window size for      target="I_blank"

    when viewing a graphic file (only) in a blank window, how do
    I set the
    window size?
    Also, what is the target="ImageWindow" command? I can find
    very
    little info on it.
    Thanks

    You're welcome - for what it's worth, I use the Kaosweaver
    extension and
    have heard good things about 'justso' as well., You can't
    beat the price
    and you get your moneys' worth, I use mine nearly every day.
    Nadia
    Adobe� Community Expert : Dreamweaver
    http://www.csstemplates.com.au
    - CSS Templates | Free Templates
    http://www.DreamweaverResources.com
    - Dropdown Menu Templates|Tutorials
    http://www.macromedia.com/devnet/dreamweaver/css.html
    - CSS Tutorials
    "Canned Heat" <[email protected]> wrote in message
    news:[email protected]..
    > In fact, they just might! Thanks, I'll look into them.
    >
    > On Wed, 26 Apr 2006 13:20:10 +1000, ".: Nadia :. *ACE*"
    > <[email protected]> wrote:
    >
    >>Would any of these extensions work for you?
    >>they open a picture window to the exact dimensions of
    your graphic.
    >>
    >>Great free extension:
    >>www.dreamweaverfever.com/grow/
    >>
    >>another couple of extensions - commercial though:
    >>
    http://kaosweaver.com/extensions/details.php?id=62&cid=7
    >>
    >>and:
    >>Just So Picture Window -
    >>www.valleywebdesigns.com/vwd_dw_JSPW.htm
    >

  • How to set permissions in firewire target mode?

    I have a 12" PowerBook that's running Leopard and a 15" MacBook Pro also running Leopard. The 12" machine won't boot, so I'm about to wipe the hard drive, reinstall Leopard, and try to reload from the time capsule.
    But since I don't really know for sure that Time Machine has been running, I'd like to make a backup first. I connected the machines with firewire cable and booted the 12" machine in target mode. It shows up in the Finder on the 15". But when I open the Users folder, it doesn't show anything. I'm guessing that there's a Permissions problem that I don't know how to overcome. How can I make a disk image of the current disk before I start the restore procedure?
    Chuck

    You can grab a utility named "SuperDuper!" ( http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html ) which is able to create clones of hard drives.
    If all you want to do is have it clone your hard drive then they allow you to use it free. They charge to unlock all of it's more advanced features -- but for what you need to do (make one simple clone of your hard drive before wiping it and re-installing) it's free.
    Incidently, did you try booting from your Leopard install disk to attempt a repair? Pop in the Leopard install media & boot from it. You'll need to select your language on that first screen, but once you do you'll notice a menubar appears at the top of the screen (that most people don't notice) and there's a pull-down menu that'll let you launch Disk Utility. Since you booted from external media (and not your internal disk) it will let you run a "Repair Disk" on the internal boot drive. It may be able to repair it without your needing to reformat and re-install.

  • Ticking clock when recording voice-over

    having just installed iLife 09,i have come to use the garageband to make a podcast when I selected the settings I need to use the voice over, I continued to record, but when I record there is a ticking noise in the background which is quite noisy, this only appears when I pressing record to do a voice over, so I installed it on a different laptop, and the same thing has happen again I was using the iLife 08 software and that was recording perfectly, it seems to me I either have a setting that is not quite correct or there is a fault with this new software can somebody help me with this please. Kind regards

    IMTalk wrote:
    I don't know how to turn the metronome off
    http://www.bulletsandbones.com/GB/GBFAQ.html#metronome
    (Let the page FULLY load. The link to your answer is at the top of your screen)

Maybe you are looking for