VOIP calls not being forwarded from GW to GK and visa versa

I have a VOIP network setup in place using 2691 routers. i have a siemens PBX connected to the 2691 routers using an E1 controller (running QSIG), my WAN interface between the two sides is an ATM interface. when i do a csim start from one router to the extension on the other side the call goes through and the phone rings. However, when i actually dial from one extension to the other, the call is not being forwarded. and what happens is that i hear the dial tone again on the phone im dialing from.
I have taken some debugs but still could pin point the problem, even though in the ccapi inout debug i found that when it tries to look for a node, it doesnt find it.
I have attached the configuration for both sides. Along with the debug from one of the sites.
There are a couple of GW's associated with the GK.
The ones im concerned about are Mussalla_GW & GK-HO.
Thank You in advance
Mouhannad

Try this:
dial-peer voice 2 pots
direct-inward-dial
Without this command the router will not collect the digits coming across the PRI.
Please rate helpful posts.

Similar Messages

Calls not being forwarded to skype number

Hello, I have had my Skype number for 2 years now and never had a problem.However since end of November 2012 calls from the USA are no longer being forwarded to my cellphone in Germany.No , I have not changed my settings , why should I , since it has been working perfectly all these years.There is no way to get help from Skype and I am extremely frustrated with their service.It sucks to pay for a product that won´t work.I am a dissatisfied customer and will leave them if they do not straighten out their stuff.

watsource wrote:
Hello, I have been a SKYPE user for the past 5 years and everything has been working fine. Recently, calls from telephones to my skype number are not being forwarded to my designated number. I've tried to turn off and on forwarding feature but still not working. Calls from other skype contacts using skype calling me are forwarded but not from any landline or mobile contacts calling my skype number.
What happens when you call your Online Number?
If calls directly from other Skype users are being forwarded to your designated number, but not the calls made to your Online Number, call-forwarding appears to be working. You may have a different issue related to your Online Number. Has it expired? If you click on "Account" at the top of this page, you can verify that your Online Number is still in effect by clicking on "Online Number" once you log into your Skype account through that link.
If your Online Number is still in effect, here's something else to check. From a computer (not the Skype app on a mobile phone or other device), can you verify the Privacy setting for Online Numbers? It should be set to allow calls from anywhere. If not, it is possible that this setting was changed, preventing you from getting calls on the Online Number.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Files from mac to RDC and visa versa

I am trying to copy and paste folders from my macbook pro to my RDC and visa versa.Unfortuantly i am not having any luck does anyone have an idea how to do this i am a bit of a beginner on this stuff.cheers

That does not work unfortunately, just extend one of your Mac folders to the RDC destination and you can transfer files simply by putting them in the folder:
Thus:

Managing music on ipod (from mac to ipod, and visa versa)

I cant believe how cumbersone and how totaly ruined by commercial bullshiat ipod and itunes is.
I realy need away to manualy copy from and to,,,and manage my music in the ipod
Is there such a program?? (freeware i hope)

Well you can put your iPod into Manual sync mode and then the manual copying from iTunes to the iPod is as easy and drag and drop.
But the other way around is not enabled to prevent illegal file sharing as this would allow a very simple way for people to share their digital music to other computers. Apple purposely designed the iPod to be a player so that music is sort of one way, onto the iPod or deleted from it, but not transferred off of it to something else.
There are third party apps that can move stuff off the iPod to the computer, but I am not sure if any of them allow normal day to day to and from transfers of individual tracks like you want to do.
Patrick

HT201272 How do you transfer your audiobooks from pad to phone and visa versa

Not sure how to do the above

If they were bought from Apple then you should be able to copy them from the iPad to your computer's iTunes via File > Transfer Purchases, and you can then connect the iPhone to your computer's iTunes and sync them to that via the iPhone's 'Books' tab - and similarly for going from the phone to the iPad. You can't connect an iPhone to an iPad for direct transfer.

How can I sync apps from Mac to iPhone and visa versa.

Hi,
Firstly I'm not having any problems syncing apps to my iPhone.
I'm very OCD and would like to have it so that If I install an app onto my Mac, it sync to my iPhone. And then if I delete it from my Mac and plug my phone in to sync, it will delete it from my iPhone.
Basically I want my iMac to be the hub of the apps, so everything I see on my iMac will be on my phone.
Let me know if you have a solution for this!
Tim

As far as installing is concerned, if you install an iPhone app on your Mac and sync your iPhone to your Mac using either USB or WiFi the app will be installed on your phone. You can also go (on the phone) to Settings/iTunes & App Store and turn on Automatic Downloads for apps. Then whenever you buy or download an app on your computer or another Apple device it will automatically be installed on your iPhone.
For uninstalling, there are 2 ways to uninstall; one is on the phone (which you said you don't want to do) and the other is to connect the phone to iTunes, click on it, then on Apps, and uncheck any apps you don't want on the phone, then sync.

When I sync a certain cd from a certain band all of the music from another band dissapears and vise versa.

This problem has perplexed me for quite some time. I have been trying to find a solution to this for a while now and have had no luck. The problem I face is that I have trouble getting a cd from one band and all of the music from another band to sync to my ipod touch. When I do manage to get one of them to sync the other one isn't synced. I do manage to get the other one to sync but the previous one gets removed from my ipod. In detail it is the plastic beach album from the gorillaz and a two disc greatest hits set from sublime. I have no problem syncing other items to my ipod. Before the last update neither of those items would sync to my ipod. After the update I managed to get the gorillaz cd to sync but no sublime. I unchecked the sublime music and resynced my ipod. Then I checked the sublime music and synced my ipod. This worked in putting the sublime music on my ipod but for some reason removed the gorillaz albume from my ipod. When I went through the same process to try and get the gorillaz ablum back on my ipod it removes the sublime music. I never receive any kind of error message. I highly doubt apple support is going to help at all because I am using a pc and last time I tried to get help from apple support they tried to get me to start messing with my reg key edit. That problem I actually ended up fixing with a hard reset so my faith in the apple support hotline has been demolished. I was hoping there might be someone on here that has run into a similar problem and knows the fix for this.

I would like to add something to this. I just discovered tonight that in the case of both the specific cd and the entire sublime music they will be removed each time I sync my ipod. But if I uncheck them, sync the ipod, then check them again sync the ipod one more time they will the on my ipod. But upon the next sync the songs will be removed even though they are checked.

Getting information from laptop to host and visa versa

Hi!
Here is the situation. I need to tranfer all the data that exits on the laptop to host and I also want the updated data back to laptop. what is the easy way to do that. I have already created the tables on the laptops which is also exactly the same in the host. the oracle that we are using is 8i. could anyone please help me what is real process to go about this and how I can do this process.
people who has a laptop they go out in the field and enters the information and comes back to office and they have to sync back to host all data.
Your help on this process would greatly appriciated. Thank you.
my personal e-mail address is [email protected]
Sincerely
Beshu

Beshu,
I would think the best way to handle this is Snapshots, or Materialized Views. The master table would exist on the host, and each
laptop would have a replica of the master table. This would be an updatable snapshot/MView. Unfortunately, you would need to create
the snapshot/MV on each laptop, rather than use the existing tables you have already created.
With updatable snapshots/MViews, the laptop user can modify the snapshot table, and the changes are recorded in a log file.
When the laptop user goes back to the office, they can run a job which posts their changes to the master table, and then
receives updates from the master table as well. Since you would be using updatable snapshots, you would need to define
conflict resolution on the master table to resolve data conflicts.
Depending on the database versions involved, there are lots of things you could do to make your life simpler, such as using a single
deployment template to instantiate all the laptops.
Janet

Upgrading from Premium to Standard and Visa Versa

Hi all
Our upgrading issues rumble on here at my workplace!
We currently have 2 machines which are installed with CS2.
We have (due to ordering issues - mistakes!) 1 x CS2 - CS5 STANDARD upgrade and 1 x CS5 to CS5.5 PREMIUM upgrade.
My question is, if we upgrade our PREMIUM CS2 to a STANDARD CS5, can we then upgrade again using the PREMIUM CS5-CS5.5?
My question is one of compatibility!
Thanks!

Yes you can upgrade.
Bob

Change printer mode from grey to color and visa versa

I need to know how to change my printer option to print to color. I have changed it to grey and now I need to change back to color. I believe it has to do with color managment and profiles. Help.

Hello @Kat58
Welcome to the HP forums.
I understand that you would like to enable your printer to print in color again.
I would like to help.
This is mostly dependant on software.
So that I may better assist you, can you please answer the following questions.
What operating system is on the computer that you are using?
What version is teh operating system?
Did you mean Officejet 6600?
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Invite Email not being sent from iCal from a Google Apps calendar

Hello,
I am running Mac OS X 10.6.5, iCal 4.0.4, and am attempting to do the following from a Google Apps calendar I have setup in iCal. Please note that it's not gmail, it's Google Apps. If that makes a difference. That being said...
I am trying to create a meeting invite from iCal. I am able to create the invite and add attendees with no problem. When I hit send (from iCal), the invitees do not receive an email notification of the event, but it does appear their calendar (both in iCal and via Google Calendar on the web). I need an email to be sent to the invitees that they have been invited to a meeting, not just to have it appear on their calendars.
When I create the meeting invite via Google Calendar on the Web the invitees do receive an email notification (as specified in their calendar preferences). The issue only happens when the meeting invite is created in iCal.
When an invitee accepts or declines a meeting via iCal I receive an acceptance or declining email. Just not when the meeting invite is sent.
Also, I am able to create a meeting on one of the "On My Computer" calendars in iCal, invite people, and a meeting invitation is sent as expected.
And again, the invitees have notification of meeting invites turned on in their calendar settings (as is shown by the fact that when the invite is sent out via Google Calendar on the Web they receive an email with the invite).
Thanks! Any assistance would be awesome.
Aaron

That was actually my post on the Google forums
Here is what I have found so far (and hopefully some of my assumptions are correct, because we're making the full switch to Google Apps this weekend and I am assuming it will work after this). This is long, but I'm trying to be thorough. Also note that I have updated to 10.6.6 since the time I first posted my last message.
We are currently piloting Google Apps, so our primary domain (which I will refer to from now on as domain.com) still points to our old exchange servers. Mail is currently being delivered to our Google Apps pilot accounts the following way:
1. User sends an email to [email protected]. This email is delivered to our old Exchange servers.
2. Once the email is received on our old Exchange servers it gets forwarded to our Google Apps test domain (gtest.domain.com).
This seems to be an important piece of the puzzle as our primary domain (domain.com) shows up on the Google Apps for Admin dashboard as improperly setup (which is correct, because we're currently piloting)
So, in iCal I have my Google Apps account setup (I'm one of the pilot users) the following way. I added the Account as Google calendar in iCal, but once the account shows up it shows up as a CalDAV account.
Under the account information tab:
CalDAV
Description: [email protected]
User name: [email protected]
Password: my password
Under the server settings tab (*NOTE: these were entered in automatically when I setup the calendar as a Google calendar)
Server address: www.google.com
Server path: the path to my calendar.
Use SSL is checked
Use Kerberos v5 is NOT checked
So, during my testing I was sending meeting invites from people who were in the Google Apps pilot to other people who were in the Google Apps pilot. When I was doing that, no invitations were getting sent.
I created a new email account on our exchange server ([email protected]) but did NOT set it up to be a part of the Google Apps pilot (this means that emails were not being forwarded from [email protected] to [email protected]). Doing this successfully delivered all invites, cancellations, and meeting updates from iCal!
From what I can tell there must be something going on (probably my own fault) when a calendar invite is sent from my Google Apps account, through our old Exchange system, and then back to our Google Account. My assumption is it has something to do with the fact that our MX records for domain.com currently point to our old exchange servers, and the MX records for gtest.domain.com point to the Google Apps servers. It may also have something to do with the SPF record which only allows emails from domain.com to be sent from our Exchange servers.
Those are just guesses though as I am not very knowledgeable in that area.
I hope this helps and I would love to hear about anyone else working on this issue.

Cases where messages are not being consumed from a queue

MQ 4.0
I have a cluster of 3 brokers. Java clients use RANDOMIZE to connect to the cluster of brokers. Message selectors are not used. My consumers are all synchronous, and connection.start() is called prior to calling MessageConsumer.receive().
What I have seen on random occassions are messages not being consumed from the queue. The problem seems to be sporadic.
I was thinking that the reason it is sporadic is because of the RANDOMIZE configuration of the client connetion / object-store.
That is, there is a possibility for the following to happen:
1) There were messages produced on a queue on broker A, but before these messages were consumed, all the consumers have been shutdown. Thus, the messages on queue stayed on broker A .... and have not been copied / clustered to the other brokers in the cluster ( As per online documentation, a queue is "copied" to other brokers only when there is a consumer for that queue on the other brokers ).
2) Then the client applications started up produced and consumers again. This time, the producers were all connected to broker B, and all consumers for the queue were also connected to broker B.
3) Because there are no other consumers for the queue on the other brokers, the messages in the queue on broker A are never consumed.
Can someone confirm that this is a possibility ?

Well ... it does seem to be the case.
I changed the object-store so that instead of using RANDOMIZE for imqAddressListBehavior, it uses PRIORITY. Therefore, all clients ( producers and consumers ) will connect to only 1 broker out of the 3 in the cluster.
After restarting all JMS clients with the new imqAddressListBehavior, there were messages in various queues in the other brokers that were not being consumed, because there are no longer any consumers on any of the other brokers.
All the messages in that broker that all JMS clients connect to are being consumed ...
Except for about 6 messages that stays in the queue for whatever reason. All consumers receiving with receive( 10000 ), and after consuming all messages above the 6, it returns without any more messages in the queue.
Well ... so much for cluster of brokers. I'll have to think of an alternative.

Default File Permission not being inherited from parent Share folders

I'm having some trouble with file permissions
on one of my 10.4.7 file servers (running XServe).
New folders under Shared folders are not getting their
permissions from the parent folders.
Share permission is owner:rw,group:rw,everyone:none
but a new folder created below that becomes
owner:r+w,group:r,everyone:r
and the owner for the new folder is the user who
created it and not the admin (for the machine).
I have the default permission to set to inherit permission
from parent but that doesn't seem to be working.
I have couple other Xserve 10.4.7 file servers that
is behaving the way I want, with default permission
is being inherited from the parent folders, and I've compared them but cannot find any difference between
the two in their settings.
Thank you,
Tadashi

If you deny read and execute access for any parent folder, you've denied the ability to access its contents. The POSIX execute bit for folders is the switch that determines whether or not the folder's contents can be viewed, listed, or searched. If the contents are not enumerable, then it doesn't matter what their privileges are.
But be careful. Just not allowing execute for the POSIX owner, POSIX group or POSIX everyone else field may not be sufficient if you're using Effective Permissions. In this case, you'd want to inspect your ACL entries for the parent to ensure that the following controls were not in relevant ACL Allow entries: readextattr, readattr, readsecurity, list, and search. You could also create an ACL Deny entry which denies these five controls for the group or user you want to block out; but don't block the Everyone or Authenticated Users group because ACL Deny rules are evaluated in such a manner that they "subtract from" ACL Allow and POSIX permissions:
E <=> (P U A)\D
Effective Permissions (E) are logically equivalent to the union of (U) applicable POSIX permissions (P) and applicable ACL Allow entries (A), taking away (\) applicable ACL Deny entries (D).
Further, POSIX permissions, P are defined as P <=> (u xor g xor o); they are either the permissions of the owner (u), group (g), or everyone else (o) fields, but not any combination of the two or three.
--Gerrit

Podcasts not being Removed from my Ipod

I have several old podcasts that I have deleted from my ITUNES that for some reason, are not being deleted from my ipod...? The podcasts are not showing up in my itunes, so not sure how to clear them out from my ipod?? Thanks in advance for your help.

The most likely culprit is a playlist that's getting synced to your iPod.
The big change in this area in 7.7 is that all podcasts, even ones in playlists, appear in the iPod's Podcasts section. Before 7.7 the only episodes that appeared in the Podcasts section were ones that you synced in the Podcasts tab.
The interesting thing is that this change affects only what shows up in the iPod's Podcasts section, it doesn't affect the files that are actually transferred to the iPod.
To check this, find one of the episodes with the play count >= 1 in your iTunes library. Right click (or control click) the episode, and in the contextual menu go to Show In Playlist. See what playlists appear in that list. (Show In Playlist is right under Add To Playlist. If I'm wrong, Show In Playlist won't be there at all.)

My deleted emails on iPhone 4s are not being deleted from server

I'm facing a problem with my iPhone 4s when deleting emails. Unfortunately, they are not being deleted from the server. I tried setting the account in pop and imap with settings to delete from server and trash ticked. Still they keep on appearing in Outlook which is a double work to do. Please advise.

I'm no expert by far, but have had issues with this before.
IMAP should allow your iPhone to remove messages from the server.
But have you made sure both the iPhone and Outlook are connecting via IMAP?
If your iPhone does remove the messages from the server, but your computer is using POP, then the computer may download the email before it is removed form the server by your iPhone.
This was my issue, that my computer had already downloaded the message, and POP does not check later if it is deleted.
If you delete a message from Outlook does it disappear on the iPhone?
Alternativly you may need to check the email server settings.
Who is your email provider?
They may be able to check if IMAP allows you to remove emails.

VOIP calls not being forwarded from GW to GK and visa versa

Similar Messages

Maybe you are looking for