VoIp with Virtual PBX

I'm Having an issue determining how to setup my configs for a VoIP solutions here is what i have.
cisco 2811 with a 3550 switch, the company i work for uses a virtual PBX hosted by another company. i have to install the 2811 with the 3550 and 20 cisco 7960 phones. I have done all the DHCP pools, the trunking and vlans and intervlan's . but the main issue is trying to figure out how to setup the telephony service or do i not need to as the host PBX server has all the configs store on it and the original way was just plug and play in a sense with just a few modifications?
If more details are needed i can provide.

Duplicate
https://supportforums.cisco.com/discussion/12361941/voip-virtual-pbx
And this is Video Over IP section

Similar Messages

VoiP with Virtual Desktops

My company is switching over to VoiP with HUD and we are also looking into using the Virtual Desktops with existing PCs. Will the phone system work with VDI?

Hi
VDI is base in RDP or X11 protocol.
With Windows 2003R2, the RDP sound is on way only. The RDP is not bidirectional yet.
Microsoft plan to put is in Windows 2008R2 Server but is only roadmap.
Best Regard's
Marcelo Moreira Martins
[email protected]
Technical Consultant - Tarantella Systems Engineer
SE- Systems Engineer - M3 System Integrator.
Sun Microsystems do Brasil - Authorized Reseller
VMware VIP Partner
+55-51-3333-2644 - Porto Alegre Office
+55 11-4063-6584 - SP
+55-51-8167-9382 - Mobile Phone
Visit the EduSoft web site: http://www.sun.com/edu/edusoft/

VoIP / virtual PBX

I'm Having an issue determining how to setup my configs for a VoIP solutions here is what i have.
cisco 2811 with a 3550 switch, the company i work for uses a virtual PBX hosted by another company. i have to install the 2811 with the 3550 and 20 cisco 7960 phones. I have done all the DHCP pools, the trunking and vlans and intervlan's . but the main issue is trying to figure out how to setup the telephony service or do i not need to as the host PBX server has all the configs store on it and the original way was just plug and play in a sense with just a few modifications?
If more details are needed i can provide.

That is something you would need to find out within your company, if you have an ISR, you would configure CME
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm.html
You need to find out whether they bought that equipment to configure their own CME, or just to provide connectivity for that hosted PBX, and then ask assistance from them to find out what you need to configure for the phones to work with them.
I would assume they want their own, but that's just my assumption.

RingCentral, GotVMail, Virtual PBX that works well with OSX?

I am looking to use a virtual PBX service like RingCentral or GotVMail for my small business. We are all using Mac with OSX Leopard; some of these services don't seem to work terribly well with OSX:
http://forum.ringcentral.com/viewtopic.php?t=172
Has anyone here found a virtual PBX that works well with OSX?

I like Quicken personally. There is a new version in the works.
Quicken 2007
Quicken 2015 information

SPA 8000 Connection with IP PBX

I have SPA 8000 8 Port Analog Telephone Adapter , i want connect this with IP PBX and use Analog telephone in my home (Assign extension number for each room)
Can you please explain to me how to configure and get extension number from IP PBX to ATA adaptor
Thanks in advance
Shamsheer

Hello,
as far as I know, FAX and VoIP aren't the best friends - those technologies are not designed to work together smoothly ...
You may try following tuning :
Set your fax machine to 9600 (not 14400),
Make sure you only use G711a (Europe) or G711u (US) codec (fax will not work with others).
Activate T38 FAX support if your device FW offers such possibility.

Cisco SPA525g2 Date and time Not Synced with the PBX server

Hello,
We have a couple of SPA525g2 phone connected and registered to our PBX server. We were able to configure 3 extensions on different lines of the phone. However, at times we were encountering issues with the other lines configured on the phone. There are times wherein 1 extension configured on the phone is having one way audio issue, but the other extensions configured on the same phone is working fine. and we have to reboot/reset the phone several times for all the extesions configured on the phone to work.
Also, whenever we reset the phone, the date and time will be way way behind the current date and time, eventhough we have already set the correct date and time before we reset the phone.
How can we resolve the one way audio issue on 1 or 2 extensions of the phone, while the other extensions configured to it is working fine?
How can we make the phone sync the date and time with the PBx server?
Any input and help regarding this issue is greatly appreciated...
Btw, date and time issue not sync with the PBX server is just happening on SPA525g2, we have other phones like SPA303, SPA504, and SPA232D/SPA302D. All other phones' date and time is in sync with the server even though we reset them except SPA525g2.
Thank you very much,

PeterMacSF,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Living with virtual pc 7

I've recently running a failure in my virtual pc 7 running on my imac g5. sin that it is, i need this product to access my quickbooks online business software.
lately i've received the following error message (unrecoverable processor error has been encountered.) from here, it asks to be restarted. the same message appears every time i attempt to use virtural pc. i've uninstalled and reinstalled the program several times to no avail. other than this, my mac work as well as it ever has...flawless.
does anyone have any other suggestions, whether it is with virtual pc, or how to work around quickbooks online prejudice attitude? any and all suggestions are appreciated. thanks all.

Are you saying that Quickbooks for Mac OS X doesn't do what you need it to do?

Installing windows XP using discs supplied with virtual PC

I am currently running Windows XP Home in Virtual PC under 10.3.9 in a powerbook G4. I want to upgrade to a new Macbook for Christmas.
Can I use the Windows discs I purchased with Virtual PC to install Windows for the dual boot process?
Thanks in advance
Rob

Hi Rob,
it is indeed technically possible to use the Windows XP from Virtual PC.
See here for procedure: http://www.macosxhints.com/article.php?story=20060527175405403
But keep in mind that the Windows License does not allow you to use one Windows XP on two or more computers.
And because of the Activation Process of XP they will find out...
Good Luck
Stefan

Lion 10.7.4 issues with Virtual Machines

Hi,
I'm having lot of issues with virtual machines (both Parallels and VMWare)
since having update to lion 10.7.4.
I make myself:
If I switch on Mac OS a run any vitrual machine software
I can run Windows XP and Ubuntu at same time with no issue and very fluently.
But, if I switch on Mac OS and start using Eclipse, Safari 5.2 and other production stuff and
want to use vmware or paralles
they become unusable even if I quit all the tasks ans "purge" memory.
(eg: if i click start button on windows I have to wait seconds before the start menu pops up)
Any Idea?
I have MacBook Pro 13 Unibody mid 2009 with SSD Drive AND 4GB of RAM
and I had no such issues with Lion 10.7.3

alex_75 wrote:
As you wrote before, virtual mchines need big chunks of contigous RAM and
2,5 GB of free RAM wuold have enough ammount of such a RAM.
No, it wouldn't. 2.5 GB of free RAM could consist of 5 chunks of 500 MB of contiguous RAM, separated by RAM allocated by other processes.
Here is a hypothetical memory map. Assume a is application memory, o is operating system memory, and - is free memory.
boot:           oooo--------------
run app1:    ooooaao-----------
run app2:    ooooaaoaaaaaaoo---quit app1:   oooo---aaaaaaoo---
Maybe there is some issue in the way 10.7.4, in some perticolar situations, handle the process of freeing RAM.
What you can't accept, and I don't know why, is that before the update to 10.7.4 everithing was fine.
I don't know why you don't beleve me.
There is nothing in the 10.7.4 update description that mentions a re-write of the virtual memory system. http://support.apple.com/kb/HT5167
I just worte here to see if someone could give any advice to do further invesigations.
I know the price of upgrading RAM but I think that this would be a "microsoft like" solution
and I'm trying to find what service or task or whatever is creating this issue.
The only thing "Microsoft like" about buying more RAM is the fact that you need it to run your Microsoft operating systems. It has been this way as long as I can remember. I upgraded my MacBook to 4 GB RAM in 2008 just so I could run Windows more easily.
Perhaps you have your virtual memory settings too high. Depending on what you are doing in the VM, you may not need the default settings. XP will run low-intensity tasks with a 500 MB VM size. It will run just about anything in 1 GB. Linux should run fine in the same range too.

URGENT HELP WITH VIRTUAL WLC

We had a problem with Virtual Machine which Cisco Virtual WLC installed. Virtual Machine files were damaged and the system was not start normally. We have had to reinstall the WLC, but after installation impossible to import current license to new one.
how can we install this licence again?

Licenses are tied to the device they're being used on. With a virtual WLC, the license is tied to the unique identifier of the vWLC and when you recreated the vWLC after your VMware problems the new vWLC has a different unique identifier.
It's a similar situation to what happens when a physical controller is faulty and is swapped out by cisco, the replacement will have a different serial number and you'd have to re-host the license to the new serial number.

Ipad2: with iOS7 it's quite impossible to type with virtual keyboard (very long time before screening letters).

Ipad2: with iOS7 it's quite impossible to type with virtual keyboard (very long time before screening letters).

I have found a workaround in this bug report.
Make a script in /usr/lib/systemd/system-sleep/keyboard.sh
#!/bin/sh
case $1/$2 in
post/*)
echo -n rescan > /sys/devices/platform/i8042/serio1/drvctl
esac
Do not forget to make it executable:
chmod a+x /usr/lib/systemd/system-sleep/keyboard.sh

WP with Virtual PC on powerbook 867?

Anyone ever tried Windows XP with virtual pc on powerbook 867? Does it guarantee any reasonable speed and stability?

I cannot comment on VPC5 since I never used it. I used to run VPC6 but I was not so convinced of that version (slow and unstable as far as I remember).
The only thing I can add are the system requirements, which can be found at http://www.microsoft.com/mac/howtobuy.aspx?pid=sysreq
VPC 7:
700 MHz native G3, G4 or G5
MacOS X 10.2.8 or newer
512 MB RAM
1024 x 768, thousands of colors
VPC 6.1:
500 MHz native G3 or G4 (G5 not supported)
256 MB RAM
VPC 5 is no more mentioned on this site.
Hope this helps.
Stephan

ORA-00939 when creating XML table with Virtual Columns

Getting error on creating table with VIRTUAL COLUMNS:
Error at Command Line:4 Column:31
Error report:
SQL Error: ORA-00939: too many arguments for function
00939. 00000 - "too many arguments for function"
Without VIRTUAL COLUMNS works fine.
Where to start?
Is it possible to add Virtual Columns after a table is created?
CREATE TABLE TDS_XML OF XMLType
XMLSCHEMA "http://xmlns.abc.com/tds/TDSSchemaGen2.xsd"
ELEMENT "TDSTestData"
VIRTUAL COLUMNS
TESTID AS (
    XMLCast(
              XMLQuery('declare default element namespace "http://xmlns.abc.com/tds/TDSSchemaGen2.xsd"; /TDSTestData/TestID' PASSING OBJECT_VALUE RETURNING CONTENT) AS VARCHAR2(32)
   )SQL*Plus: Release 11.2.0.2.0 Production on Mon Apr 30 20:17:29 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for 64-bit Windows: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
SQL>

victor_shostak wrote:
Figured, Virtual Columns work only for Binary XML.They are only supported, currently, for Binary XML.

Warning: Problems occurred during synchronization in Charm with virtual sys

Hi Team
I have configured charm with virtual system --(Dev>V01>V02>) as client specific STMS , Where V01 is Quality and V02 is production system; When I do consistency check from solar_project_admin tcode for project created, it shows no errors ;
but when i try to activate the charma and click on "refresh" button , it throws following error
"Warning: Problems occurred during synchronization" ;I have checked the logs in SLG1 for object "/TMWFLOW/CMSCV" ; but
there are no errors except warnings for BC Sets , Can you pl guide what might have gone wrong ?
All the RFC's are working fine and there is no authorization issue in solution manager.
Thanks
Swati

hi,
for the CTS activation you must do all the below,
1. SMSY --> landscape creation
2. RFC Creations
3. Client Specific TMS configuration
4. Prj --> CTS activation.
go through the below doc,
[https://websmp209.sap-ag.de/sapdownload/011000358700000657692007E/eCTS_ChaRM_SP12.pdf|https://websmp209.sap-ag.de/sapdownload/011000358700000657692007E/eCTS_ChaRM_SP12.pdf]
jansi

ChaRM implementation with virtual systems

Hello Gurus,
We have successfully installed and done basic settings for Solution Manager 7.0 EHP1 system, we are planning to implement ChaRM and I have already downloaded the guide for it.
But I have few doubts regarding its setup like since we don't have DEV, QAS and PRD setup yet, so is it possible to configure ChaRM right now?? maybe with virtual systems ??
Will it be better to configure ChaRM only after DEV installation ?
Also, I am not clear about the transports which will be done from Solution manager using ChaRM, is it like you create transport request from Solman or from DEV ??
Thanks for providing any valuable information !!
Cheers !!
Shobhit Garg

Hi
these will help you
http://wiki.sdn.sap.com/wiki/display/SM/ChangeRequestManagement
First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
Regards
Prakhar

VoIp with Virtual PBX

Similar Messages

Maybe you are looking for