Volume Logic 1.3.2 and Leopard work-around

I found a good work-around that got VL 1.3.2 working under Leopard.
I found the "fix" at Veerle's blog...
http://veerle.duoh.com/blog/comments/nomore_volume_logicupdate/
Here's the summary so that you don't have to jump to another site...
Quit iTunes
Download iWOW (updated for Leopard) Demo and install - http://www.srs-store.com/store-plugins/mall/iwow-plugin.asp
Quit iTunes or dont start iTunes....
Drag the iWOW plugin out of /Library/Audio/Plug-ins/HAL/ to the desktop
Ctrl Click iWOW plugin (show package contents)
Goto Contents/MacOS/ (you should see iTea.)
Ctrl Click VolumeLogic plugin (show package contents)
Goto Contents/MacOS/ (you should see iTea.)
Replace the iTea located in the Volume Logic plugin with the one from iWOW on the desktop.
This was all I needed to do, since I was able to activate VL without a problem. If you get an activation error from eSellerate, try the following...
Download the Latest eSR SDK - http://webvise.mindvision.com/pub/mac/eSellerateEmbeddedSDK.dmg
Mount the eSellerate Embedded SDK and look in the "eSellerate Libs" folder for "EWSMacCompress.tar.gz"
Go to /Library/Audio/Plug-ins/HAL/VolumeLogic.plugin
Ctrl click and choose "Show Package contents" and open the folder "Resources"
Replace the "EWSMacCompress.tar.gz" with the one from the eSR SDK dmg you just mounted

In one of my projects I used a third-party Jar-file. I placed it into the code/jars directory of my SAP BC package.
The "original" mail.jar resides in sapbc47/Server/lib. Ever tried to replace it with the newer one ?

Similar Messages

I have a MacBook Pro. Lately my volume button is grayed out and not working. Any solutions on how to fix this? Thanks.

I have an older MacBook Pro (circa 2009). Lately I've noticed my volume button is grayed out and I cannot adjust it. I've tried rebooting. Sometimes it becomes available to use and other times not. Any ideas on how to fix this? Thanks!

Reset the SMC. Check the Audio Midi Setup utility. If connected to an external display that has audio, that may have hijacked the audio.

Syncing of Apps and a Work Around I Thought Of

(this is an excerpt from a previous thread which was not answered - if you could kindly help me out with this and offer your expertise it would be greatly appreciated. Thanks!!)
Hi All,
I know this will be quite a change of tone from what you've been getting so far here in this thread, but I want to start of by saying thank you, for all the help and guidance you have been and are giving us. I greatly appreciate it.
I have a question on apps folder structure upon restoring from backup. I will share with you the chronology of events, what I understand, what I hope to achieve and what ways I think this can be achieved. By sharing with you my whole thought process, I hope to get your critique and correction if at any part I have misconstrued the logic. Thanks in advance again.
I have 2 iPhone and 2 iPads. When I bought my first iPad (brand new) I plugged it into iTunes and did a restore from my iPhone 4G backup. I believe I selected "Sync Apps" (though I can't confirm now cause I formatted my computer already) because all my iPhone apps were synced to my iPad - which is great. Q1 --> Because I restored from my iPhone 4G backup which presumably had "Sync Apps" checked, I believe my first iPad's iTunes syncing options also had "Sync Apps" checked as well - reason is that all the "Music", "Movies" and "Photos" options were also transferred over. Am I correct? Thanks
So for the rest of the post, I will assume the iTunes setting for my 1st iPad was set to "Sync Apps" (until you correct me otherwise).
My computer was running a bit crappy --> Windows, I know haha, so I formatted it. I did not save my backup file to an external harddrive and then put it back into the %appdata% iTunes Mobile Sync folder. Therefore after formatting, I plugged my iPad into the new computer and did a backup. Because (if I remember correctly, - (Q2) please correct me if I am wrong) it sensed my iPad as connect to a previous iTunes it asked me if I wanted to disconnect from the previous iTunes and sync to this one cause I do know that we can only sync to one iTunes at a time. I had to re-configure all my "Music, "Movies" and "Photo" settings again as this was a new iTunes configuration - which I do understand. Q3 - if I have a new iTunes because I formatted my computer, but I ported over the old backup file and restored my iPad from there, would it still be considered a new iTunes link and thus I have to configure everything again? I don't think so cause the backup contains all the settings; what I think will happen is that I will just be asked if I want to disconnect from the old iTunes and connect to the new one, and all my settings will be restored from the backup.
So I synced my "Music", "Movies", "Photos" and also "Info" and "Podcasts" (I don't use "TV Shows") and got it all set up. Only thing I didn't tick was the apps - perhaps cause I didn't take the time to understand it previously owing to the fact that I didn't need to then ha, but now I do!! So after everything was synced, I did a backup. After reading your thread, and the link you gave, I understood that I have to transfer purchases from my iPad because my iTunes had no apps - as it is a "new iTunes". So I transferred my purchases.
Next I joined my 2nd iPad (second hand iPad) and did a "Restore" (If you are experiencing problems with you iPad, you can restore its original settings by clicking Restore.) to wipe out apps etc that the previous owner had. Q4 - what is the difference betwixt the "Restore" in iTunes below "Check for Update" and the iPad's "Settings" --> "General" --> "Reset" --> "Erase All Content and Settings"? I believe (with some experiments ha) the "Restore" in the iTunes will give me a "brand new" iPad but I don't know what is the difference betwixt that and "Erase All Content and Settings".
I then restored from the backup of my 1st iPad. But remember just now I mentioned that I did not tick the "Sync Apps" in my 1st iPad's settings? So after the restore was done, I had all my "Music", "Movies" and "Photos" + "Podcasts", "Info", everything but my "Apps" --> because I didn't tick "Sync Apps" in my backup. So my 2nd iPad had everything but "Apps".
Now I need to rectify that and create a mirror of my 1st iPad. I don't jailbreak my iOS devices and all my Apps are bona fide purchases with my hard earned money . Here is the solution I thought of and the single problem I face.
Solution: On my 2nd iPad, click Sync Apps, select all the apps I want in my iPad, and then click Apply. Then I restore the backup of my 1st iPad. That restores all my app data and very importantly, my folder structure (cause when we have a lot of apps and we organise it all into folders, re-putting them back into folders can be quite time consuming; quite the antithesis of computing in the first place).
This truly give me a mirror image of my 1st iPad (please kindly correct me if I am wrong). The only problem is that, the Sync Apps is still not ticked. Q5 - Is there any benefits of my ticking "Sync Apps" vis a vis doing it this work around method? (Update: I thought of something - "Sync Apps" would allow all the apps on my iPad to be automatically synced to my iTunes but for my work around, I need to think of all the apps I want on my iPad and tick them. If it is for example 50 out of 50 apps, it's simple. But if it's 50 apps out of 150 apps in my iTunes then it would be a big headache. Any other benefits / costs?) My "File Sharing" is still working ok - in the sense I can still transfer data to my apps without having it synced (thankfully it is not sync dependent - but please once again correct me if I am wrong).
The reason why I do this work around method is because if I were to click "Sync Apps", it would get all my apps into my iPad but it would destroy all my folder structures. Q6 - however if I do this "Sync Apps", when the apps are transferred to my iPad I would have all the app data on my iPad already right? Because I postulate it work on a n-tier abstraction separating data from the app. I think this is true because previously I restored from backup and had some apps missing, but when I downloaded the app all the data was "magically" there.
Q7 - is there any way to maintain apps folder structures when I am syncing to a new iTunes instead of the work around I have thought of?
Q8 - and last question haha. My iPad has 10 3rd party apps now for example. If I backup now, it would backup the app data of all 10 apps (3rd party apps - notation left out for simplicity sake moving forward). However if I deleted 2 apps from these 10 apps, then if I backup the 8 apps, would it mean that the backup no longer stores the 2 deleted apps's app data? I think that would be the case but I would just like to confirm.
Thank you for reading my very long post and I really appreciate all your help, Allan and all others. Looking forward to your advice, guidance and response!! Thank you once again!!!
P.S. does iTunes lag quite a bit in Windows (if you are a Windows user)? For me it's not the quickest programme around; can get quite laggy sometimes, on my newly formatted and empty 64 bit 4GB Dual Core 2.4 GHz HP TX2 and Acer computer as well

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Volume output way to soft..Any work arounds?

Hi all...ive tried doing a search on this subject but couldnt find any solutions...I have noticed that the sound output for my laptop is way too soft for my liking...I went into the sound properties and have disabled all enhancements as I have noticed with the enhanements on the volume constantly fluctuates (too too sure why but it does)...When my lap top isnt plugged into external speakers I can barely even play games on it because I really cant hear anything..maybe im going deaf but even my POS 4 year ol Hp puts out louder sounds than our Qosmios...For sure the Harmon Kardons can take more than whats being thrown at it so if any one has any suggestions on how to achieve this please do let me know...Someone suggest SX Fidelity Amplifier but for the full version it costs money...Im looking for a preferably free way to work around this issue...Thanks!

If your laptop uses the Realtek HD Audio drivers than chances are the driver is not configured property. These directions are for Windows 7, other operating systems may require a slightly different set of steps.
First, either download and install the latest Toshiba audio drivers for your laptop via the Toshiba Support web site, or download and install the latest Realtek HD Audio drivers from the Realtek website.
Second, once the audio drivers have been updated, enable "Loudness Equalization" on either the Start --> Control Panel --> Hardware and Sound --> Realtek HD Audio Manager --> Sound Effects tab, then click OK to save the setting change. Or on the Start --> Control Panel --> Hardware and Sound --> Sound --> Speaker Properties (select Speakers then the Properties button) --> Enhancements tab, scroll down the list of sound effects to enable "Loudness Equalization" then select the OK button to save the setting changes.
Once the Realtek drivers have been updated and the "Loudness Equalization" has been enabled the system sound audio level is much louder, however the DVD and Audio CD audio levels might continue to be low for some users. Some find that setting the Equalizer, found under the Realtek HD Audio Manager Sound Effects tab or on the Speaker Enhancement tab, to "Powerful" seems to help with the sound levels.

User account errors and some work-arounds

1. Migrate multiple users, but second on no set up correctly
I had this when I tried to migrate one user then a second as a subsequent migration. Home directory was created but no user was created in Sys Prefs. Sadly, the user name was created in the system somewhere and I could not re-use.
Workaround. Migrate all users together.
2. Library being duplicated for every user.
My library file is 25Gb, and this is being duplicated for every user. I thought this was a shared resource under Tiger ....? My disk space is taking a hammering.
Workaround: Unknown
3. Delete a user and try to re-add
If you delete a user, and all files etc., you would expect to be able to re-add. Nope. The name remains persistent in some system file(s) somewhere, even after a re-boot.
Workaround: Fresh install. Ugh!
4. Drag-and-drop not working in Finder/Desktop
OK, got drag and drop working on MBP with 10.5.1 and G5 Quad under 10.5.1.
It appears that the second and on users when performing a migrate are not set up properly.
If drag-and-drop isn't working, go into Sys Prefs, Accounts, and create a Group. Add the non-functioning account to the group (I did both).
I ran Repair Permissions (lots of errors that SUID would not fix, to do with frameworks and identities, so I left alone. Many other permissions errors fixed).
Logged out .... btw, intermittent bug where you cannot log out a second account that's running as it doesn't take the name or password. You have to switch user and log it out that way.
Log back to the user with the drag and drop issue. Shutdown and then start back up.
When you log back in, drag and drop should work..... and keep on working whether you switch user etc.
Also, if you now remove the Group from Sys Prefs./Accounts, drag and drop will still continue to work. (I haven't tried a restart to see whether it is persistent though.)
If anyone has better workarounds or - preferably - fixes, please let me know.
Thank you.

Mary,
You do not tell us the method of authentication you have implemented.
If you are having NTIntegrated authentication, you should check if the eliteadm workflow user record contains her nt logon credentials?
You can flag that user as deleted, but before you do, make sure it does not contain any id that you need to use later (such as email or nt account details, if either is used for user identification purposes.)
RE stalling workitem - when you view the details of the stalled record in the 'Stalled workitems' list, you should be able to also read an error message giving you a clue of what went wrong. Either double click on the item to see details in dialog or expand all columns in the console to read details.
Good luck,
Sanna

Note size limit and slight work-around in Lyrics

I tried to reply to a older post, but since it's archived I wasn't able to so I'll simply reference it.
I followed the suggestions from the following post in order to fit more continuous viewable text on my iPod:
http://discussions.apple.com/thread.jspa?messageID=3412651#3412651
According to the post, since you can fit appx. 256 MB into ID3 tags (and only 4K in Notes), that you could create a short song only for the purpose of storing text in the Lyrics tab. I followed the suggestions and while I was able to fit a little more than twice as much text in the Lyric as I could the note, only a portion of the lyrics was actually viewable on the iPod.
Let me clarify. I could fit the ENTIRE text that I wanted (a text file 200K) into the Lyrics tab and could view all of it in iTunes, only a small portion was viewable on the iPod itself.
So, I was able to slightly work-around the note size limit, I wasn't able to expand it by as much as was suggested in the original post/thread.
Does anyone have any ideas? Obviously, I can't get back to the original posters personally (Chris CA, b noir, and chanyiwai), so hopefully some of them will see this thread.
Has anyone else found a better work-around?

The ID3 tag can be 256MB but how that tag is implemented by Apple in iTunes, I don't know.
Haven't heard of any other workarounds for more text.
Really though, the iPod is not designed for documents/texts.

My iTunes 7 woes and subsiquent work around

When I try and launch iTunes, I get a error message that says "Can't launch iTunes because some files are missing" or some jazz. After a little playing around, i found that when I kill iTunesHelper.exe and relaunch it (it's in the itunes directory) iTunes will launch. Except that everytime I quit iTunes and then try to launch it again later, I have to go through these same steps. Like I said, it's a temporary work around. At any rate this may be the same problem that many of you are having but are just not getting the error that I am seeing.

This new version *****. I'm going back to 6.0.
Make note (for PC users): "DO NOT UPGRADE TO WINDOWS VISTA UNTIL ALL THE MAJOR BUGS ARE FIXED" which will probably be 6 to 12 months after it is released to the public.

I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button, and my volume control on my I pad won't do anything either, but the volume of all my alarms and sounds works perfect, what can I do??

I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button and my volume control on my I pad don't do anything to help, but yet my volume works perfect on everything else, what can I do???

do u have your ipad doing airplay because that could happen

I have a 5th gen ipod nano that freezes when playing songs. i can't turn off, change songs, turn volume down. song stays stuck and nothing works at all. any ideas??

i have a 5th gen ipod nano that freezes when playing songs. i can't skip, turn down volume, turn ipod off. it simply screeches as the song is stuck at a specific point. any suggestions?

You have 2 options: #1 - iPod Repair Tutorials
#2 - take the iPod Nano to an Apple store or an AASP. Whichever is more convenient for you.

Canon IR-C3100N Snow Leopard work around

I just got this printer.
Installed PPD v2.85, setup using LDP, select print from Mac and nothing come out from printer.
UFR II not working on this model.
Finally got it to work by installing older iR-PS v1.8.1 Canon PS driver meant for 10.5. Will not work from setup, need to tweak as below:
1) Install PPD v2.85
2) Install iR-PS v1.8.1
3) Add printer by selecting 'more printers' - Canon IP (PS) mode.
4) Enter printer's IP.
5) The setup will auto select 'Canon iR C3100 Canon PS' as PPD.
6) Change the PPD to 'Canon iR C3100' from v2.85 PPD.
Wahla it works! If you don't change the PPD, the print queue will say driver error, please reinstall driver.
Message was edited by: jonat

Sounds like you went to a lot of trouble for nothing. By selecting the PPD, you have bypassed the Canon PS driver, so the process of adding the PS driver would be a wasted step.
While this may have worked for you, for the sake of anyone else reading this post, there is no need to add the Canon PS driver. The transport modules do not work on Snow Leopard and as you have said, if you left the Print Using set to the iR C3100 CanonPS, then you get an error. And by selecting More Printers > Canon IP (PS), you have basically selected IP > LPD as a protocol.
So, if the iR C3100 supports PostScript, then you select IP > LPD for the protocol, enter the IP address of the Canon, enter a queue name of LP and select the Canon iR C3100 in the Print Using menu.
Pahu

Lion (non-Snow) Leopard Work-Around Question.

I have a four year old Black MacBook running Snow Leopard 10.6.3 and a Two Year Old MacBook Air running Leopard 10.5.2. I can't find my Snow Leopard install disk. If I download Lion to my Black MacBook, can I transfer the install package via Bluetooth to my MB Air? If not, is there some other strategy I can employ?

Only if you frist update to 10.6.7 or later, so you can DL the installer. BTW, you can get a replacement install disc from AppleCare, providing you have the receipt. I've not tried to install Lion on top of Leopard, so don't know if that'll work, so all you can do is try it. Ensure that you have bootable backups/clones of your current installations before embarking on this venture.

Some imovie bugs, and a work-around for one!

CRACKING OF AUDIO IN CROSS DISSOLVES:
This one's been documented a lot - the crackling noise when cross dissolving two clips (anyone been following New Scientist? The podcast on 'crackling' is hilarious). I originally thought it was just a preview glitch, but the movie was actually exported with the sound error as well. It also applies to the titling.
Try this if this if: http://discussions.apple.com/post!default.jspa?forumID=858 doesn't work.
In my movie, I dissolve between shots with virtually the same ambient noise in the background. To fix the problem, I extracted the audio of the clip before the dissolve, copied and pasted it into the timeline after, and clipped it down to a size to cover the cross dissolve. Place it over the transition on the track below, and drop the sound on the transition to zero.
I appreciate this won't work in dissolves between sound fields or scenes and takes some time, but it sorted the problem for me.
OTHER BUGS:
- In the titling pane, the small thumbnail window does not always reflect the time and pause of the final render / 'preview' in full mode. the best example of this seems to be 'scrolling text' - its way out.
- as mentioned, sound dies when titles are added over moving clips. See fix above.
- copy and pasting of extracted audio seems random on the timetime - had to search up and down for where the program dumps it. Should paste at the playhead?
I'm sure some or most of these errors have been documented before. However, I found them all in a single use of imovie, and considering the programs in its 6th version, I consider it a poor performance... the audio problems particularly are unacceptable... does Apple presume that if you don't fork out for Final Cut, you don't need an editor capable of exporting a clean movie? From what I've read, some of these glitches have existed for a while.
If I've documented anytihng new, I hope someone who can relay them further does!
Regards,
Tom
PB 12" G4 1.5ghz Mac OS X (10.4.4)

What I do is lock the punch-in in time, move it to an adjacent track, make a split in the track I punched in over and roll that track back to the extent of the punch-in and then move the punch-in back down to the original track.
Like your method it also sounds harder than it actually is :-)
It just goes to show there's more than one way to .....

NSAPI Failing and no work around

We deploying to a standard weblogic 2-tier cluster, we are using the iPlanet WebServer
4.1 sp7 to host the Proxy Plugin.
Currently, when posts are made to the webserver hosting the proxy, any post that
exceeds 2K in size "kill" the web server and force it to reboot. The user's request
is lost and no information is logged.
We have tried older versions of the proxy (WL 5.1 sp8 proxy, WL 6.0 proxy) and
it appears to allow large posts, but breaks another way since the cookie names
appear to have changed for the server, thus the 6.1 server doesn't acknowledge
the cookie, thus the user always appears logged out and doesn't have sticky sessions.
We have tried the plugin on iPlanet 6.0 WebServer and the same problem exists.
Please help.
Steve

Unfortunately, I don't have that information right now. Sorry.
Eric
"Mark Pluta" <[email protected]> wrote in message
news:[email protected]...
thanks Eric. I know you don't keep the schedule for patches in your back
pocket, but I have at least two bugs assigned to sp3.
do you know when it's due for release?
thanks,
-mark
Eric Gross wrote:
I do believe this is a known problem and will be resolved in 6.1 SP3.
Regards,
Eric
"Mark Pluta" <[email protected]> wrote in message
news:[email protected]...
I am having similar problems with iPlanet Enterprise Server 4.1sp8 andWeblogic
6.1sp1 ( I also tried the 6.1sp2 plugin, but still pointing to ourWeblogic
6.1sp1 app server).
It seems that the plugin halts the POST request when set to clusteringwhenever
the size is over ~2k is directed to the application server. I do get
core
dumps, but more infrequently. Maybe, one in 10 tries.
In our application, two application servers talk to each other usingSOAP
in
which the weblogic imlementation is a POST to a servlet. We have
several
message types and the smaller ones work while the larger ones (~5k)stop
at the
web server. I would liked to load balance across the cluster by
having
the
RPC-SOAP invocation call the web server address and not the
application
server
directly.
In debugging the problem, it seems like the plugin gets the request
(from
looking at the plugin debug log when verbosity set to the max, but theiPlanet
access log doesn't), but doesn't forward it to weblogic. I tried avariety of
different parameters including keepalives and Filecaching, but to noavail.
this is a pretty critical piece for us and any help would be
appreciated.
thanks,
-mark
Eric Gross wrote:
Can you try the plugin from 6.1 SP2 and let us know the results?
Thanks,
Eric
"Steve Tocco" <[email protected]> wrote in message
news:[email protected]...
We deploying to a standard weblogic 2-tier cluster, we are using
the
iPlanet WebServer
4.1 sp7 to host the Proxy Plugin.
Currently, when posts are made to the webserver hosting the proxy,
any
post that
exceeds 2K in size "kill" the web server and force it to reboot.
The
user's request
is lost and no information is logged.
We have tried older versions of the proxy (WL 5.1 sp8 proxy, WL
6.0
proxy)
and
it appears to allow large posts, but breaks another way since the
cookie
names
appear to have changed for the server, thus the 6.1 server doesn'tacknowledge
the cookie, thus the user always appears logged out and doesn't
have
sticky sessions.
We have tried the plugin on iPlanet 6.0 WebServer and the same
problem
exists.
Please help.
Steve

Need email help and/or work around - please :)

Hi all,
I need help with retrieving emails from exchange server. I am the only one who has a blackberry so we do not have any programs installed on the server (for blackberry). I contacted our "IT" guy and he told me that I needed to set up an email on my handheld and direct it to my remote desktops IP address. This makes no sense to me.
What I need to be able to do is receive emails (or copies of them) from my work email to my handheld before the holiday break.
If you have any ideas on how I can do this I would really appreciate it.
Thank you!

Hi and Welcome to the Forums!
You've got two choices:
1) If your firm faces your email via OWA to the internet and does not use ISA, then you can configure BIS email for your BB to work with OWA. Follow these guidelines:
KB03133 How to integrate a Microsoft Outlook Web Access email address with a BlackBerry Internet Service account
It can be tricky to get right, so be patient -- the account name seems to be the trickiest attribute. Also, I was never able to get mine to configure via the device interface to BIS...rather, I had to create BIS credentials at my carrier and then use their web interface from a PC/browser to make it work.
http://www.blackberryfaq.com/index.php/Where_can_I_log_into_my_BIS_account%3F
2) If they don't face OWA to the internet, then you are left with the desktop redirector (which might be what they were directing you toward). You must leave a PC always running that is logged into the internal network and has Outlook open and connected to the Exchange server.
KB15039 How to install BlackBerry Desktop Redirector
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Jnlp incompatibility with Safari and Chrome - work arounds?

I've been developing an extension to live connect that allows remote development from the IDE. As part of this I need to reliably deploy an applet on (Firefox, IE, Safari (Ver 4 on Vista), Opera and Chrome). Everything works fine on Firefox and IE but Safari and Chrome don't even recognize the jnlp urls as java related - just dead tags.
If I deploy using "http://java.com/js/deployJava.js" all browsers work correctly but I loose the jnlp features.
I have questions for two deployment use cases -
Case one is the user case which does not require advanced features such as socket access. Obviously I can deploy using the script and everything's happy - is this the best solution?
Case two is the developer case where the applet creates a socket connection to an running on the IDE. This works fine with jnlp on firefox and explorer but not on other platforms. Do I need jnlp to open the socket to local host? Is there a way to get jnlp to properly deploy/launch on Safari and Chrome?
All answers and advice are appreciated,
Bob

Firstly, apologies for the delayed response! Secondly, thanks for the advice!
I have created another user and both browsers are perfectly fine and instantly responsive.
My security settings are on WPA/WPA2-Personal(PSK).
Any suggestions what in my main user causes the problem?

Volume Logic 1.3.2 and Leopard work-around

Similar Messages

Maybe you are looking for