Volume set to zero but music still plays

Just as described in the subject, I set the volume to zero but I can still hear the music. Happens with each and every song.
Problem is - this lowest volume setting is a bit too high for me. So this is pretty annoying. My common sense says that ZERO volume means ZERO volume.
Please don't tell me to just pause the song, that's not the issue. We should be able to set the volume to zero and hear nothing.
Appreciate any help.

Yes! It happens to me too.
Plus: When I turn the volume to max, it plays on the external speakers too. Pleaseeeee someone help meeeee! I CANT listen to music like this!

Similar Messages

Ipod nano screen is white but music still plays

I have a second generation nano and a couple of months ago I was in my car and turned on my iPod and it powered on but the screen was white. It still played music but I couldn't see what I was playing. Any ideas on how I might be able to fix this???

Please describe in detail all you have attempted to do in order to resolve the issue. Don't want to repeat any solutions you may have already tried. For example, have you tried restoring or restting?

HELP! iTunes Sais My iPod is Corrupted, But Music Still Plays

I plugged in my iPod, and iTunes sais it is corrupted and to restore it, Windows sais it is corrupted also. But all the music and videos still play. I don't want to restore my iPod because my iTunes library got damaged and whenever I import all the songs again, it just gets damaged in a day. So I don't know what to do. Anyway I can fix it?
It is the 5.5g iPod video, Windows XP, Intel Celeron D, 2.8ghz, Dell Dimension 1100, 1gb RAM. Itunes 7.0.1, and the firmware is the newest on the iPod, when I plug the ipod into iTunes it sais: "iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with Itunes. You may also try disconnecting and reconnecting the iPod.". And when I click on the iPod's drive letter in My Computer it sais the disk is not formatted, and it gives an option to do so. But all the music and videos still play fine on the iPod.

I have the same problem... But after HOURS of trying any and all apple support/user submited suport ideas (all failed) i finaly broke down and restored my iPod. But it did nothing, all it did was instead of my iPod "booting" up and i could listen to my music (that was now skipping thanks to iTunes 7) i get a screen with a picture with the http://www.apple.com/support/ipod URL.... So now i have a $400 peice of junk just sitting their thanks to iTunes... isn't life great?
Windows XP 4th Gen 40GB Click Wheel iPod
Windows XP

Blank, white screen but music still playing! Help!!!!!!!!

I've had my iPod Video (30G) for about 5 months. For some reason, today when I switched it on, the screen lighted up but it was completely white and blank. I clicked some random buttons and music started playing. I waited for the battery to run out, and then recharged it on my PC for a while. When I switched it on, the screen was still blank but music could still be played! I tried resetting it by holding MENU and SELECT but it's still broken.
HELP!

Maybe try restoring your ipod. Plug in your ipod, go to the updater through the start menu, and then, once it has recognized your computer, click on the restore button.
Caution: this will remove all songs from your iPod, requiring you to re-sync your iPod with your computer.
hope this helps..
If any answer helps or solves your problem, please mark the post that helped accordingly, it provides an incentive for posters here to try and help and gives others a quicker way of finding solutions faster, thank you

Ipod won't display but music still plays and i can move around in menu...

My Ipod mini won't display anything on the screen even after I reset it, I even hear the click type sound come from the headphones when its turned on. Right now I'm listening to music and the screen isn't showing anything is my screen broke???If it is what do I do???

Open the iPod Software Updater application. It can be found by clicking on the Start menu, pointing to All Programs (Windows XP) or Programs (Windows 2000), and then point to iPod.
It says that but in the computer I don't have an Ipod thingy in my programs???

Music still playing after turning device off

Hello I've got a curve 9300 3g os6, and when I play music on it and decide to switch the device off, the music still plays even though the device is switched off, could you please tell me what could be wrong? Thankyou.

Usually even if you take the tick out of "GPS Satellites", google apps still can access the gps if you had granted it permission, the best way to completely stop GPS is to go to Settings>Location Services and turn off "Access to my location" this will completely shut down GPS from everything. Just restart the phone after that and check if that solved your problem

My iMac makes a beep tone every minute. This persists even though volumes set to zero and notifications have been set to Do Not Disturb.

My iMac makes a beep tone every minute. This persists even though volumes set to zero and notifications have been set to Do Not Disturb.

It's likely that one of your login items is causing the problem. Select the Login Items tab in the Users & Groups pane of System Preferences. Delete any items that you don't recognize.

My iPod freezes....but the music still plays.

My iPod has been slow lately, and it'll freeze, but the music is still playing, but I can't lower the volume, change the song, so to any other screen, or pause it and the screen with freeze for like ten seconds.

Been through these?
The Five Rs.

Screen white but can still play music

i went out of my house for a couple hours and i came back and i turned it on but the screen was white but when you double tap the home but to hit play/pause you can still liste to music.what should i do

Try resetting your iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

Ipod screen and controls freeze for 1 min but it still plays

Hello, any and all help is appreciated.
Listening to music, my ipod's screen and controls will freeze for about a minute, but the ipod still plays music when this happens. It happens every 5 minutes or so. Pretty weird. If I turn on the backlight and it freezes, the backlight will stay on for 1 minute until the thing unfreezes and it kills battery time.
Also, it will remember any buttons that I press while it is in freeze mode and when it unfreezes, it will perform those functions. (i.e. if i'm listening to a song and the screen and controls freeze, it will continue to play that song. if i use the click wheel to change the volume, it won't work, but as soon as it unfreezes, the ipod will remember my actions and lower the volume eventhough i tried to adjust it 30 seconds ago. make sense?)
Has this happened to anybody else? Is there anything I can do?

Place the iOS device in Recovery Mode and then connect to your computer and restore to factory settings/new iPod via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
Then try to recover the information from the iPod
via How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official

Cannot see files in Windows Explorer, but iTunes still plays 'em

hi all,
I have all my music files on an external hard drive. Up until this morning, I could browse the files on the external drive using Windows Explorer. Now the iTunes Music folder appears empty when I click on it, and even says 0kbs when I right-click Properties.
But ... iTunes still plays the files fine, and when I right-click Get Info in iTunes, it gives me the correct file path to my external hard drive. When I right-click Show Song in Windows Explorer, it shows me the correct file, yet when I click back up on the root iTunes Music folder, it still shows up empty!
Any clues? This is most frustrating, as I just got a new laptop and am trying to get my iTunes library back on there.
thanks

Sorry for the double post.
But i should also add that when i go to Edit Preferences and go to iPod and change anything i want to change. Once the ipod is disconnected, it doesnt save and it all goes back to the normal settings.
Thanks again.

Screen Blank - Music still plays

My screen is whitewashed. Nothing comes up when I turn it on, just a blank screen. Music will still play, but only A to Z and it won't do anything else. I've tried resetting it, tried a firewire charge, etc. etc. Nothing is working and there isn't an Ipod store within 3 hours of me. Any suggestions?
2gb nano

It's only audio tracks. Mine doesn't play video and may, in fact, be a 2nd gen if that's the case. Either way, it's just a blank screen. Sometimes the screen will work for a minute or two and then go back to being blank. I'm out of ideas.

RemoveChild() but audio still plays

Hy!
I have a flash website where different pages are movieclips which are added or removed from the main stage, depending on which buttons are clicked.
The problem is that I have a 'video' page where a YouTube player is embedded. The video plays as soon as the movieclip loads, but when I remove the child from the stage and I add another movieclip on top of it, the audio still plays.
I have tried using the SounMixer.stopAll() but it works only when I test swf in Flash. When I open the swf separately from the folder it is in, it doesn't work anymore.
Can somebody please help me?
Thanks a lot!

It is not a FLVPlayback control, it is a YouTube ActionScript 3.0 Player API.
Here is the code :
// The player SWF file on www.youtube.com needs to communicate with your host
// SWF file. Your code must call Security.allowDomain() to allow this
// communication.
Security.allowDomain("www.youtube.com");
// This will hold the API player instance once it is initialized.
var player:Object;
var loader:Loader = new Loader();
loader.contentLoaderInfo.addEventListener(Event.INIT, onLoaderInit);
loader.load(new URLRequest("http://www.youtube.com/apiplayer?version=3")); //load the embedded player
play_btn.addEventListener(MouseEvent.CLICK, playVid);
pause_btn.addEventListener(MouseEvent.CLICK, pauseVid);
video1_btn.addEventListener(MouseEvent.CLICK,playVid1);
video2_btn.addEventListener(MouseEvent.CLICK,playVid2);
video3_btn.addEventListener(MouseEvent.CLICK,playVid3);
mute_btn.addEventListener(MouseEvent.CLICK,muteVideo);
unmute_btn.addEventListener(MouseEvent.CLICK,unmuteVideo);
function onLoaderInit(event:Event):void {
    addChild(loader);
    loader.content.addEventListener("onReady", onPlayerReady);
    loader.content.addEventListener("onError", onPlayerError);
    loader.content.addEventListener("onStateChange", onPlayerStateChange);
    loader.content.addEventListener("onPlaybackQualityChange", onVideoPlaybackQualityChange);
function onPlayerReady(event:Event):void {
    // Event.data contains the event parameter, which is the Player API ID
trace("player ready:", Object(event).data);
player = loader.content;
          player.loadVideoByUrl("http://www.youtube.com/v/v6oJ5rw9mys",0);
    // Set appropriate player dimensions an its position
player.setSize(480, 360);
          player.x=50;
          player.y=220;
          video_title.text="Multiplying Sevens-Times Table";
function onPlayerError(event:Event):void {
    // Event.data contains the event parameter, which is the error code
    trace("player error:", Object(event).data);
function onPlayerStateChange(event:Event):void {
    // Event.data contains the event parameter, which is the new player state
    trace("player state:", Object(event).data);
function onVideoPlaybackQualityChange(event:Event):void {
    // Event.data contains the event parameter, which is the new video quality
    trace("video quality:", Object(event).data);
I have taken this code from its YouTube ActionScript 3.0 Player API Reference

I have email sync set to manual, but it still periodically syncs on its own?

Galaxy Note 3. Sync is on, but set to Manual. Phone still occasionally pulls down email without my input. Why dat is?

My email address is [removed]@sbcglobal.net. Not sure why that would make a difference, but there you go.
Personal information removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

I have authorized my macbook and it is at 4 of 5 but music still asks 4 pw.

When I click on a song it asks me to put i my id and password. Says I have 4 of 5 computers authorized but it still keeps asking for the ID and password when I click on purchased music.

Go tour preferences in iTune on the machine on which the music is stored and open preferences. Go to the sharing tab and uncheck the require password at the bottom of the screen.

Volume set to zero but music still plays

Similar Messages

Maybe you are looking for