Volunteer is looking for job.

Hello
I am a physicist, my expertise is spectroscopy (light). I have a small experience in LV and Vision (level with CLAD). I designed a few applications for cameras (FireWire) and picture analysis. I'm looking for new interesting tasks with Vision but if you give me a chance to work with data acquisition (GPIB) it will be nice. I have my own computer. The one and only problem is I want job in Montreal, Canada.
Remember: I do not want to earn money. I want to learn by experience.
Message Edited by wd40 on 08-07-2008 09:09 AM

As the sysman user...
SELECT job_owner
,job_name
,target_name
,target_type
,job_type
,start_time
,end_time
,status
FROM sysman.mgmt$job_execution_history
WHERE start_time BETWEEN (SELECT SYSDATE - 12/24
FROM dual)
AND SYSDATE /* jobs executed in the last 12 hours */
OR start_time > SYSDATE /* OR jobs scheduled in the future */
ORDER BY start_time DESC;

Similar Messages

Looking for job PDF resumes vs html or doc resumes, what gives?

Hi,
I've been looking for jobs and most of the sites that want my resume, monster, creative group, etc, all want it in doc or html format? what gives??? I designed this great looking resume in InDesign that converts well to PDF with nice fonts and I can't even use it !!!! Now I have to resort to times and other fonts using word to make sure that my resuem at least looks somewhere close to what it should be. What happened? I thought PDF was supposed to be used by all? why does everyone want this stuff in word?
Please shed some light on this for me,
Thanks,
Stan

stan,
>In reference to post 3, is that a bad thing? Should I be wary of employers trying to 'get my guard down'???
Yes. If I were interviewing, I would try to get you to relax and feel at home -- and then see how you, as a potential employee, handle that. I want to see if the person has a tendency towards office behavior that could be inappropriate or that does not fit in with my office environment. In today's market, I'd also be scouring Facebook and other social networking sites for info on candidates I'm considering.
And for the interview, generally dress and act appropriately for going out on a sales call for the potential employer's clients -- if hired, you may be expected to do that.
As for portfolio presentation, personally, I'd rather the portfolio binder be like the frame around a picture, not an in-your-face statement. Do you want interviewers to remember the binder or its content? But other folks running with more arty clients may have a different spin on this than I. And always stick a few extra résumés in the portfolio; the designed ones are fine there.
I once had a portfolio sent to me for review that was held together with more elaborate folds and strings than an origami dog walker. I had several additional portfolios still lined up with little time to review them. All I wanted to do is rip the damn thing open. And I can't remember anything about the work inside.
And network. Most jobs are through networking with friends, family, neighbors, acquaintances and sites like LinkedIn, etc.
Neil

Electrical Engineer with automated test experience looking for job in San Antonio Area

I am an Electrical Engineer with 33 years of experience. Much of my experience involves computer programming with an emphasis on electrical systems, either controlling equipment or automated testing. I have experience in numerous languages, most recently LabView, LabWindows/CVI, and TestStand, but also including 'C', Visual Basic, FORTRAN, and Z80 assembler. I have most recently worked in the MS Windows environment, but I have worked in the UNIX environment as well.
In addition to programming I have done some hardware design and equipment specification. I have done drafting of schematics in Visio, but I also have some experience with AutoCAD. I have written user's manuals and done hardware/software integration. I feel I have a broad range of experience in many areas of engineering and programming. I also feel that my engineering background helps be to understand the needs of the customer and thus be better able to translate those needs into the control or test program they need.
I currently live in San Antonio, Texas and am looking for a job in this area. A job on the south side of Austin might be considered if I could tele-commute or work in my home with occasional trips, eg. weekly, to Austin.

I would like to speak to you about your current work situation and the type of position you may be seeking. Currently, I am looking to hire experienced LabView programmers/Project engineers for a long-term opportunity. The following is a brief job description:
LabView Programmer/Project Engineer
Albuquerque, New Mexico
The company follows the industry with LabVIEW coding techniques. Using standards as old as VXI Plug-n-Play and as new as the parallel loop Event Structure / QueuedState Machine. This code is used as the centerpiece for Test & Measurement systems that span most industries including military/aerospace, biomedical, semiconductor, automotive and telecom.
Candidate will handle LabView integration projects from beginning to end. Will work closely with customers to understand requirements, participate in bid process, manage timelines on projects, perform LabView programming, and handle customer questions and concerns. The position requires 60% programming, 20% hardware design and test, 20% customer interface and project management. Prefer candidates with 7 to 10 years of LabView programming experience.
Ability to get a DoD security clearance required.
Please email me at [email protected] or call Sun Vega 505-342-5013 or 800-222-8406.

Job Board: Looking for Job? Looking for a BizTalk specialist?

Friend of mine was looking for a BizTalk professional recently and it was painful process because of lack of resources.
So let's help each other on job market :)
For BizTalk professionals: You can place here your information, if you are on market now. Please, use the format below:
Position: (Entry / Middle / Sr. level ; Architect / Team Lead / Developer / Administrator; etc)
BizTalk Server experience: _ years
Good at: _________________
Expert at: ________________
LinkedIn profile link.
Please do not place here your resume :) It is too big for forums.
This is only for individuals.
If you are looking for a BizTalk professional, please, place the job description in this format:
Position (Entry / Middle / Sr. level ; Architect / Team Lead / Developer / Administrator; etc)
Location
Duration
Contact email or LinkedIn profile
I will monitor this thread and remove all unrelated posts.
Thanks!
Leonid Ganeline [BizTalk MVP] BizTalk Development Architecture

Hi Leonid, We have good and experience team on Biztalk and worked on Middleware tool AMTrix.
Please find our details:-
iVision Software is a 9 year old software development organization with expertise in Biztalk among other technologies. We have worked for clients like GE in various geographies like USA, Scandinavia
and India doing both EAI and B2B integrations. Our people work closely with their client counterparts taking care of their business needs utilizing Agile methodologies. We provide an optimal combination of people who are experts in their field and in working
offshore with onsite business teams resulting in great quality service at low prices. Please find below a brief description of our capabilities.
The iVision BizTalk Developer Team have the following competencies:
Developing xml schema, flat file schema and EDI Schemas.
Developing simple and complex maps as per the requirement.
Implementing various Integration patterns in BizTalk.
Implementing various design patterns in Orchestration.
Comfortable in handling Exceptions.
Working on BRE and BAM.
Creating C# helper class, custom functoid and custom pipeline components whenever required .
Proficient with Visual studio , SQL Server .
Working with following adapters : FILE, FTP,SMTP, WCF-SQL, SQL, SOAP, WCF-custom
Custom XSLT
Packaging and deploying application.
Expertise in EDI X12 , EDIFACT and major XML standards(cXML, OIOXML,UBL,Svefaktura,Finvoice,xCBL etc).
Proficient in creating EDI Agreements and Trading Partner Profile.
For further discussion, please drop email to me at [email protected] or skype me at atul.kumar651984
Regards,

Labview engineer looking for job in china

I am a labview engineer for more than one year in philips lighting (shanghai china).Working on labview7 and RS232,GPIB interface instruments.Now I looking for a job in shanghai china.
more detail please contact [email protected]

Hi Alec,
Your organisation sponsor visa for non-local residents?

Young labview guru with B.S. degree looking for job in mid-atlantic region

Hello,
I recieved a B.S. degree in materials science engineering from cornell university in december '04. I am currently working as a materials engineer but I am looking to make a switch to a job that will make better use of my programming / LabVIEW talents. I am looking for something in the Mid-Atlantic region or New England.
Please email me at [email protected] and I will gladly send you my resume. Feel free to call me at 412.874.8740 with any other inquiries.
Thanks,
-Zach Samuels

Instrumentation Engineering, LLC is looking for an experienced Test Engineer who is proficient in LabVIEW and systems integration. 3-5 years experience preferred. Competitive salary and benefits.
Instrumentation Engineering is located in Oakland, New Jersey and has been in business since 1969. IE is a engineering company whose sole focus is ATE Systems design, fabrication and integration.
We currently have one opening in the Engineering department and are currently accepting Resumes.
Please email your resume to:
David Rosenthal
Vice President
Instrumentation Engineering
http://www.ietest.com
[email protected]

Looking for job execution from backend

All,
I need a bit a help. OEM apprently doesn't keep snapshots after the database is shutdown and restarted. What I'm looking for is a way to view what jobs are schedule and had run within the last twelve hours from SQL*Plus.
Any ideas?
Thanks,
Bobby

As the sysman user...
SELECT job_owner
,job_name
,target_name
,target_type
,job_type
,start_time
,end_time
,status
FROM sysman.mgmt$job_execution_history
WHERE start_time BETWEEN (SELECT SYSDATE - 12/24
FROM dual)
AND SYSDATE /* jobs executed in the last 12 hours */
OR start_time > SYSDATE /* OR jobs scheduled in the future */
ORDER BY start_time DESC;

LabVIEW Engineer looking for job

I have attached my resume to review.
Attachments:
Resume.pdf ‏50 KB

Dear Sir / Madam,
I am an experienced engineering professional skilled in Post Silicon Validation by Automating using LabVIEW, Power Measurements, Jitter Measurement & Analysis, Audio Characterizations, Silicon Validation Test Cases, Multi-Channel Data acquisition and Triggering using NI DAQ Cards, Control Systems, Serial Communications using VISA and Serial I/O Interface, Code Native Interfaces, Call Library functions to interface with third party and custom dlls, ATMEL and PIC Micro Controller programming, Temperature Controllers like Honeywell, ESPEC-641, TestEquity 115, Hand held terminal programming to drive servo motors, C/C++/VB Programming for developing embedded applications.
Good experience on Windows API, protocol implementations, ARM11 & ARM7TDMI on-chip programming using Register Map and Pinout Specs using C/C++ Metrowerks Code Warrior and MULTI-ICE for ARM Debugger.
Looking for L1/H1 Job
Thank you for your time and consideration.
Please find an attachment of my resume in MS-Word format.
Sincerely yours,
K.Sowjanya. B.Tech
Message Edited by Support on 04-04-2008 08:39 AM

Tier 1 UK VISA Holder, looking for Job assignment.

Hello,
I have Tier 1 HSMP UK VISA, looking for employment in UK.
A little about me:
1) 4 Years of experience in NI LabVIEW / Test Stand Programming Environment
2) Extensive hands on various instruments interfacing like Agilent, Rodhe & Schwarz & Anritsu.
3) Database i.e MySQL interfacing experience.
3) Able to understand hardware board schematics & prepare test plan documentation.
4) Experience on various interfaces like Serial/GPIB/JTAG/Ethernet/I2C/SPI etc.
5) Passport available
If any vacancy which matches the above requirement, please reply to this post with the e-mail address on which I can send my detailed information and resume.
Thanks!
CLA 2014
CCVID 2014

Please See http://www.raymarine.co.uk/about-us/careers/portsmouth-uk/?cid4=1434837&entryid4=65430

Certified LabVIEW Associate Developer with 6 month of MNC Industry work experience looking for job change

Hi,
I am Vishal. I am Certified LabVIEW Associate Developer. Working on contract position as Junior Engineer from sasken communication on customer place National Instrument. Looking for permenant position.

I am need of a CLD or CLAD for a direct hire or long term contract opportunity in western New York. Please contact me at 716-677-2667 Ext 12 or 888-297-4825 Ext 12 to discuss.
Thank you,
Vanessa
:: vanessa boone :: contract staffing manager :: systems personnel group :: west seneca ny :: ( 716.677.2667 x12 :: * [email protected]

Looking for job, one came up but at place with jerk admin.

Holo wrote:if you lack experience and hope to get it, suck it up and work for the asshole. Leave 6 months later when you have experience. As of now, reading all your posts, you seem to have troubles landing a position. So try and land it and gain that experience.
Thought had crossed my mind too. I have contacts at local government from an internship they said because of some new things they've taken on they are basically struggling to get ahead of putting out fires. Sounded like they were considering bringing me on as I could at least do helpdesk, basic server stuff, and whatever they want me to learn. Of course they didn't say when they thought that may happen or even 100% it would. If I ended up working at this place and the local gov't makes me offer even if less pay i'd probably put in my 2 weeks, and if asked why i'll say because...

I do some SMB consulting right now, been looking for full-time position though. A network tech position came up at a relatives work, but from what I know the admin there is a bit of a jerk, and almost everyone that knows him seems to think that. Some even have said if you run across a person that acts like may be friends with him look out because their probly not someone you want to deal with either.
I don't think he does anything illegal or the like, but knowing a little about him he is arrogant, and I've been told when he messes up it's always someone else's fault. That last part bothers me as if he messes up he may try and fire me and how am I supposed to defend from that in future when I have to say oh I was fired from ...
I almost think I'd be better off take something working in electronics or something at some store and wait for a...
This topic first appeared in the Spiceworks Community

Looking for job in UK (london)

Could you recommend me sites like creativeheads or simmilars?
Thanks a lot.
Any suggestion will be welcome.

I would like to speak to you about your current work situation and the type of position you may be seeking. Currently, I am looking to hire experienced LabView programmers/Project engineers for a long-term opportunity. The following is a brief job description:
LabView Programmer/Project Engineer
Albuquerque, New Mexico
The company follows the industry with LabVIEW coding techniques. Using standards as old as VXI Plug-n-Play and as new as the parallel loop Event Structure / QueuedState Machine. This code is used as the centerpiece for Test & Measurement systems that span most industries including military/aerospace, biomedical, semiconductor, automotive and telecom.
Candidate will handle LabView integration projects from beginning to end. Will work closely with customers to understand requirements, participate in bid process, manage timelines on projects, perform LabView programming, and handle customer questions and concerns. The position requires 60% programming, 20% hardware design and test, 20% customer interface and project management. Prefer candidates with 7 to 10 years of LabView programming experience.
Ability to get a DoD security clearance required.
Please email me at [email protected] or call Sun Vega 505-342-5013 or 800-222-8406.

Electrical Engineer looking for Job

ARCHANA BHALERAO
1025 University Avenue # 128, Sacramento, CA 95825. Phone No: 916-752-4429,
Email: [email protected]
CAREER OBJECTIVE
Seeking a position as Project Engineer where I can apply my hardware, and instrumentation knowledge and LabVIEW programming skills to challenging projects.
EDUCATION
Master of Science in Electrical and Electronic Engineering, California State University, Sacramento. (2004)
Bachelor of Science in Instrumentation Engineering, Pune University, India. (2000)
QUALIFICATIONS
* Hardware: PC-based instrumentation, GPIB, PXI and serial instrumentation, sensors, and signal wiring Analog/ Digital circuit design, testing, and troubleshooting Microcontroller-based Systems design, interface and programming
* Systems: Data Acquisition, Motion Control, Machine Vision and Image Analysis, Industrial Automation, SCADA Systems.
* Software Tools used: LabVIEW, TestStand, MATLAB, SIMULINK, ORCAD CAPTURE, and MS-Office.
CAREER EXPERIENCE
Research Assistant â Engineering and Computer Science Department, CSUS 2002âPresent
* LabVIEW Programming for Industrial Projects.
* Analog and Digital Circuits.
* Microcontroller-Based Systems.
* Motion Control and Vision Analysis.
Customer Support Engineer â Theta Controls, India (Alliance Member âNI, USA) 2001â2002
* System Design for Data Acquisition using LabVIEW.
* Providing technical support to customers.
Graduate Engineer (Maintenance Department) â Gabriel India Ltd, India. 2000â2001
* Preventive Maintenance and Automation Projects.
INDUSTRIAL PROJECTS:
PC Based System to Measure Surface Tension of a Liquid using Pendant Drop Method
* Use LabVIEW to control the motion of a Syringe connected to a Stepper Motor and Motion Controller Card.
* Use IMAQ Vision with LabVIEW to extract the x and y coordinates of a shape of a bubble.
* Develop a DLL to compile a code in C language and use it with LabVIEW.
UV Detector Project â Reflect Scientific, CA
* Interface signals from two photodiodes to a 12-bit A/D converter, interface keypad, LCD, A/D and a D/A converter to a microcontroller to read percent transmittance of a liquid passing through a liquid chromatograph.
* Develop an Application Program to calculate absorbance of a chemical using Beers Law.
* Develop a Datalogger using LabVIEW to log data from 3 channels of the UV Detector.
Microcontroller Based Prosthetic Arm Monitoring Device â Shriners Hospitals for Children, CA
* Interface signals from a force sensing resistor, electric motor and EMG sensors to a microcontroller to log the data related to usage of a prosthetic arm by a disabled child.
* Design the signal conditioning circuitry, and develop an Application Program.
PAPER PRESENTATIONS
* Microcontroller Based Prosthetic Arm Monitoring Device â Winner at the 18th Annual California State University Student Research Competition.
* Optical Fiber Amplifiers
* Mobile Intel Pentium M Processor
RELEVANT GRADUATE / UNDERGRADUATE COURSEWORK
Machine Vision, Advanced Robot Control, Artificial Intelligence, Process Control and Instrumentation, Micro Computer System Design, Advanced Digital Signal Processing, Fiber Optic Communication, Biomedical Instrumentation
PERSONAL SKILLS
Excellent written and verbal communication skills, quick learner, self motivated and positive attitude, demonstrated leadership skills, ability to work with a team as well as independently, experience in interacting with customers, experience in making technical presentations.

Hello Archana,
If you are now in India, you could write to me with your CV.
We are recruiting LV skills. My email id is [email protected]
If you are based elsewhere, check http://www.calbay.com/index.htm
I read that they are recruiting.
Another good option could be simply to goto google and search with "LabVIEW job" and such other combinations.
Goodluck!
- Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Looking for job training

Hello
I hope you will be generouse to advise me
how can I find a job training with flashbulder,php,mysql ???
I have searched for a month and got nothing to mention
Thank you

This is not a job board.

Im looking for jobs. my email, and password keep changing.

can you please let me know what my password is , and what my username is? i only use the andriod phone in the docking station . i have no internet or computor. the tech at verizin store gave me new names n paswords .
i'm an idiot when it comes to this stuff and i understand u need a desktop to work it right.can you help me? please
<sub>edit: removed personal information for your protection. (philipp)</sub>

hello, you're in a support forum for mozilla products - nobody from us volunteer contributors is able to help you with account credentials from third-party sites. i'm afraid you'll have to contact their support channels directly...
[[Problems with email and how to find help]]

Volunteer is looking for job.

Similar Messages

Maybe you are looking for