VPN error - Function CreateFile failed with an error code of 0x00000002
I got an error when connecting VPN, detailed messages are attached. I am using administrator to log on. The issue is there after I run a virus clean activity. Any help is appreciated.
Cisco Systems VPN Client Version 4.6.04.0043
Copyright (C) 1998-2005 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 5.1.2600 Service Pack 2
1 15:16:21.625 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
2 15:16:22.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
3 15:16:23.046 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
4 15:16:23.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
5 15:16:24.046 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
6 15:16:24.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
7 15:16:25.046 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
8 15:16:25.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
9 15:16:26.046 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
10 15:16:26.546 10/10/09 Sev=Warning/2 CVPND/0xE3400003
Function CreateFile failed with an error code of 0x00000002(DRVIFACE:718)
Please see my post in the IPsec and Firewall forum.
Similar Messages
-
hello All,
when I try to delete or edit any DBA Job in transaction DB13 the following error is displayed:
An error occurred when processing system
Function DB6_PLAN_DELETE_BATCH failed with return code = Job error
How can I fix this error and delete or change my DBA jobs?
My syste is SAP ECC 6.0 SR3 - Solaris 10 - Oracle 10.2.0.4.0
Thanks
HernandoHello Hernando,
Let's see what this SAP Note says,
Note 1093883 - ORACLE: Function module DB6_PLAN_ADD_BATCH fails
Edit: However, 'valid release' makes confusion
Regards
Subbarao
Edited by: subbarao chinta on Oct 8, 2009 9:00 PM -
OCIEnvCreate fails with -1 return code on Solaris 9 x86 with Oracle 10g
Hi
OCIEnvCreate function is failing with -1 return code on solaris 9 x86. The database I use is, Oracle 10g release 1. I tired to connect with sqlplus and am able to connect to dataserver. Why does OCIEnvCreate fails? Can someone help me in this regard.
ThanksCan place the sample code.
-
Wrapper.createfile failed with error 3: The system can't find this path
Hi,
I have a problem of installing Java on my computer. I saw the error which is "wrapper.createfile failed with error 3: The system can't find this path specified."
I searched a lot of sites to solve it, but i havent found. How do I solve it ?
Thanks...Hi,
Error code 0x80070003 = "The system cannot find the path specified."
Have you checked the log file smsAdminUI.log? Maybe it can give us some clues.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi team,
I have issue with "SAP_COLLECTOR_FOR_PERFMONITOR" Job .it has been Finished but in Job Log I get error as below:
Job started
Step 001 started (program RSCOLL00, variant , user ID DDIC)
Clean_Plan:Cleanup of DB13 Plannings
Clean_Plan:started by RSDBPREV on server sapqas01
Clean_Plan:Cleaning up jobs of system QAS
Function DB6_PLAN_STOP_BATCH_JOB failed with return code = Job error
Clean_Plan:terminated with error
REASON=Job error
Database system not supported
Reorganization of the database started
Reorganization of the database ended
Job finished
I have alredy reschedule this Job in 000 with DDIC User.
Please help me ,
Thanks
VijayHello Vijay,
The "Database system not supported" error you see, suggests that your TCOLL table is not setup correctly. You probably have a report scheduled in your TCOLL which is for a different DB then the one you run.
If the collector canels all the time, then this is probably a report which is scheduled to run every hour in your TCOLL. If it only cancels sometimes, then it should be easier to identify which report is causing it in your TCOLL.
The bottom line is to ensure your TCOLL is setup correctly and that you are not running DB reports there that are for a different DB than the one you use. The SAP note you follow to setup your TCOLL table depends on your SAP system version:
12103 - Contents of the TCOLL table
970449 - Contents of TCOLL table in SAP_BASIS 640
966309 - Contents of table TCOLL in SAP_BASIS 700
966631 - Contents of TCOLL table in SAP_BASIS 710
Regards,
Brendan -
IMP-00017: following statement failed with ORACLE error 1849
Hi
We have a instance 11.1.0.7
while doing import i got the issue as:
IMP-00017: following statement failed with ORACLE error 1849:
"BEGIN "
"dbms_scheduler.create_job('"MAXIMOTSSYNC"',"
"job_type=>'STORED_PROCEDURE', job_action=>"
"'maximo_ts_job'"
", number_of_arguments=>0,"
"start_date=>'30-AUG-12 15.12.04.000000 +04:00', repeat_interval=> "
"'SYSDATE + 5/1440'"
", end_date=>NULL,"
"job_class=>'"DEFAULT_JOB_CLASS"', enabled=>FALSE, auto_drop=>TRUE,comments="
">"
"NULL"
"dbms_scheduler.enable('"MAXIMOTSSYNC"');"
"COMMIT; END;"
IMP-00003: ORACLE error 1849 encountered
ORA-01849: hour must be between 1 and 12
ORA-06512: at line 2
IMP-00091: Above error occurred on the following function and object: CREATE MAXIMOTSSYNC. Remaining PL/SQL blocks for this object will be skipped.
Import terminated successfully with warnings.
My imp command is:
imp system/manager file=schema.DMP log=schema.log fromuser=max touser=max
Please suggest on this
Thanks
ShaikORA-01849: hour must be between 1 and 12Error: ORA 1849
Text: hour must be between 1 and 12
Cause: An invalid hour was specified for a date using the 12-hour time format.
If a 12-hour format code (HH or HH12) is used, the specified hour must
be between 1 and 12.
Action: Enter an hour value between 1 and 12. -
CONNECT failed with sql error '1017'
Hello,
nus650pa:dv8adm 23% more trans.log
4 ETW000 R3trans version 6.05 (release 46D - 12.07.06 - 16:40:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 date&time : 14.08.2014 - 16:58:18
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [developertra,00000] Thu Aug 14 16:58:19 2014 170924 0.170924
4 ETW000 [developertra,00000] db_con_init called 1225 0.172149
4 ETW000 [developertra,00000] create_con (con_name=R/3) 22426 0.194575
4 ETW000 [developertra,00000] Loading DB library '/usr/sap/DV8/SYS/exe/run/dboraslib.so' ...
4 ETW000 136 0.194711
4 ETW000 [developertra,00000] load shared library (/usr/sap/DV8/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000 369207 0.563918
4 ETW000 [developertra,00000] Library '/usr/sap/DV8/SYS/exe/run/dboraslib.so' loaded
4 ETW000 174 0.564092
4 ETW000 [developertra,00000] function DbSlExpFuns loaded from library /usr/sap/DV8/SYS/exe/run/dboraslib.so
4 ETW000 694 0.564786
4 ETW000 [developertra,00000] Version of library '/usr/sap/DV8/SYS/exe/run/dboraslib.so' is "46D.00", patchlevel (0.2186)
4 ETW000 15725 0.580511
4 ETW000 [developertra,00000] function dsql_db_init loaded from library /usr/sap/DV8/SYS/exe/run/dboraslib.so
4 ETW000 60 0.580571
4 ETW000 [developertra,00000] function dbdd_exp_funs loaded from library /usr/sap/DV8/SYS/exe/run/dboraslib.so
4 ETW000 121 0.580692
4 ETW000 [developertra,00000] New connection 0 created 96 0.580788
4 ETW000 [developertra,00000] db_con_connect (con_name=R/3) 14511 0.595299
4 ETW000 [developertra,00000] find_con found the following connection for reuse:
4 ETW000 53 0.595352
4 ETW000 [developertra,00000] Got ORACLE_HOME=/oracle/DV8/920_64 from environment
4 ETW000 73038 0.668390
4 ETW000 [developertra,00000] -->oci_initialize 589 0.668979
4 ETW000 [developertra,00000] Got ORACLE_SID=DV8 from environment 56 0.669035
4 ETW000 [developertra,00000] Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
4 ETW000 52 0.669087
4 ETW000 [developertra,00000] Logon as OPS$-user to get SAPR3's password 33 0.669120
4 ETW000 [developertra,00000] Connecting as /@DV8 on connection 0 ... 91 0.669211
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='', dbname='DV8') 999 0.670210
4 ETW000 [developertra,00000] Thu Aug 14 16:58:20 2014 245280 0.915490
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017 263 0.915753
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 858 0.916611
4 ETW000 [developertra,00000] Try to connect with default password 38 0.916649
4 ETW000 [developertra,00000] Connecting as SAPR3/<pwd>@DV8 on connection 0 ...
4 ETW000 53 0.916702
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='SAPR3', dbname='DV8')
4 ETW000 46 0.916748
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017 118256 1.035004
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 86 1.035090
4 ETW000 [developertra,00000] Got ORACLE_SID=DV8 from environment 716 1.035806
4 ETW000 [developertra,00000] Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
4 ETW000 55 1.035861
4 ETW000 [developertra,00000] Logon as OPS$-user to get SAPR3's password 33 1.035894
4 ETW000 [developertra,00000] Connecting as /@DV8 on connection 0 ... 29 1.035923
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='', dbname='DV8') 28 1.035951
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017 126719 1.162670
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 165 1.162835
4 ETW000 [developertra,00000] Try to connect with default password 36 1.162871
4 ETW000 [developertra,00000] Connecting as SAPR3/<pwd>@DV8 on connection 0 ...
4 ETW000 47 1.162918
4 ETW000 [developertra,00000] -->oci_logon(con_hdl=0, user='SAPR3', dbname='DV8')
4 ETW000 42 1.162960
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'olog' failed: rc = 1017 123784 1.286744
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 70 1.286814
4 ETW000 [dblink ,00627] ***LOG BY2=>sql error 1017 performing CON 1140 1.287954
4 ETW000 [dblink ,00627] ***LOG BY0=> 42 1.287996
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DV8'"
Please help.
Thanks
Priyanshu SrivastavaHi
Could you check this SAP Notes Error message
"ORA-01017: invalid username/password; logon denied
BR310E Connect to database instance DV8 failed"
1576837 - ORA-01017: invalid username/password;
1860519 - SAP fails to connect to the database
BR
SS -
ERROR = CONNECT failed with sql error '1017'
Hi,
we are getting the following error when we run r3trans -dx.It is an windows system.
Here i have attached the trans.log.
4 ETW000 r3trans version 6.14 (release 700 - 16.10.08 - 16:26:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 30.11.2010 - 08:58:12
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Nov 30 08:58:14 2010 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 3857 0.003857
4 ETW000 [dev trc ,00000] using "E:\usr\sap\TQ1\DVEBMGS10\exe\dboraslib.dll"
4 ETW000 22 0.003879
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 9 0.003888
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 18 0.003906
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.167)
4 ETW000 143 0.004049
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 16 0.004065
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 25 0.004090
4 ETW000 [dev trc ,00000] New connection 0 created 18 0.004108
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 29 0.004137
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 16 0.004153
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 15 0.004168
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 18 0.004186
4 ETW000 [dev trc ,00000] CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 223 0.004409
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.2.0' 6714 0.011123
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 23 0.011146
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.WE8DEC 2397 0.013543
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPRP1's password 16 0.013559
4 ETW000 [dev trc ,00000] Connecting as /@TQ1 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
4 ETW000 22 0.013581
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 18 0.013599
4 ETW000 [dev trc ,00000] 0 WE8DEC 1 0000000006E6C090 000000000032AFF0 0000000006E7E378
4 ETW000 109 0.013708
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 6894 0.020602
4 ETW000 [dev trc ,00000] Allocating server context handle 14 0.020616
4 ETW000 [dev trc ,00000] Attaching to DB Server TQ1 (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608)
4 ETW000 37 0.020653
4 ETW000 [dev trc ,00000] Assigning server context 0000000006E80608 to service context 0000000006E7E238
4 ETW000 21591 0.042244
4 ETW000 [dev trc ,00000] Allocating user session handle 32 0.042276
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608,usrhp=000000000032B808)
4 ETW000 32 0.042308
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
4 ETW000 34551 0.076859
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 23657 0.100516
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1017 13 0.100529
4 ETW000 [dev trc ,00000] Try to connect with default password 12 0.100541
4 ETW000 [dev trc ,00000] Connecting as SAPRP1/<pwd>@TQ1 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
4 ETW000 17 0.100558
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 16 0.100574
4 ETW000 [dev trc ,00000] 0 WE8DEC 1 0000000006E6C090 000000000032AFF0 0000000006E7E378
4 ETW000 18 0.100592
4 ETW000 [dev trc ,00000] Assigning username to user session 000000000032B808
4 ETW000 15 0.100607
4 ETW000 [dev trc ,00000] Assigning password to user session 000000000032B808
4 ETW000 23 0.100630
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608,usrhp=000000000032B808)
4 ETW000 18 0.100648
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
4 ETW000 3281 0.103929
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 19 0.103948
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1017 10 0.103958
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 1017 performing CON [dblink#5 @ 431]
4 ETW000 10634 0.114592
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#5 @ 431]
4 ETW000 17 0.114609
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'TQ1'"Hi,
LOG BY0=>ORA-01017: invalid username/password; logon denied
You need to change your schema users password using "brconnect"
Try as follow:
1. Login as ora<sid>
2. Use below command to reset SAPRP1 users password
# brconnect -u system -f chpass -o SAPRP1 -p <new password>
If it still doesn't work... just set the password as "sap" (it is default password for schema user)
# brconnect -u system -f chpass -o SAPRP1 -p sap
Hope, it helps you...
Suggestions:
Above thing will help even if OPS$ mechanism is not set correctly...
But it is recommended to create and set permissions for OPS$ user. Else some BRTools function will produce errors...
Relevant notes are already suggested by others...
Please go through it word by word...
Regards.
Rajesh Narkhede -
F *** ERROR = Node 'bootstrap' failed with exit code 503.
Hi,
i installed the sap nw 7.2 trial version succesfully and due to sapgui problem i downloaded a new sapgui 720 patches from the service place and installed and when installation ,i installed jre for the sapgui. after that when i start the sap server the jstart.exe is not started it is stopped. and showing the errror message
F *** ERROR => Node 'bootstrap' failed with exit code 503.
dev_jstart
trc file: "dev_jstart.3508", trc level: 1, release: "720"
trc file: "dev_jstart.new", trc level: 1, release: "720"
sysno 00
sid CE1
systemid 560 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 22
intno 20020600
make multithreaded, Unicode, optimized
profile D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
pid 3508
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, egi
Sat May 22 10:55:11 2010
trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
arg[ 1] : pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
F
F Sat May 22 10:55:11 2010
F ********************************************************************************
F Java environment properties (D:\usr\sap\CE1\J00\work\jstart.jvm)
F root directory : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007/sapjvm_6
F vendor : SAP AG
F version : 1.6.0_07
F cpu : x86
F java vm type : server
F java vm version : 6.1.007
F jvm library name : jvm.dll
F library path : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin
F executable path : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin
F ********************************************************************************
F SAP extensions : available
F ********************************************************************************
I [Thr 3512] MtxInit: 30002 0 2
trc file: "dev_jstart", trc level: 1, release: "720"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, egi
F [Thr 3512] *** LOG => connected to Enqueue Server.
F [Thr 3512] *** LOG => connected to Message Server.
F [Thr 3512] *** LOG => Starting run level 1.
F ********************************************************************************
F Java process [deployment] properties:
F section name : deployment
F config file : D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : Deploy_offline
F home directory : D:\usr\sap\CE1\J00\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 3512] *** LOG => Instance state is "Deploying offline components" (STARTING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Starting nodes: runlevel 1.
F ********************************************************************************
F Starting process: D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=deployment
F arg[ 5] = -file=D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F arg[ 6] = -jvmFile=D:\usr\sap\CE1\J00\work\jstart.jvm
F arg[ 7] = -traceFile=D:\usr\sap\CE1\J00\work\dev_deployment
F arg[ 8] = -javaOutFile=D:\usr\sap\CE1\J00\work\jvm_deployment.out
F env : JStart/ReserveSize=0x60000000
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F libPath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin;D:\usr\sap\CE1\J00\j2ee\os_libs;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F stdout : D:\usr\sap\CE1\J00\work\std_deployment.out
F stderr : D:\usr\sap\CE1\J00\work\std_deployment.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process Deploy_offline started with pid 3648
F ********************************************************************************
F [Thr 3512] *** LOG => Process deployment started (pid 3648).
F
F [Thr 3512] Sat May 22 10:55:14 2010
F [Thr 3512] *** LOG => Process deployment stopping (pid 3648).
F
F [Thr 3656] Sat May 22 10:55:14 2010
F [Thr 3656] *** LOG => Signal 13 SIGCHLD.
F [Thr 3512] *** LOG => Process deployment stopped (pid 3648).
F [Thr 3512] *** LOG => Instance state is "Deploying offline components" (STOPPING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Run level 1 completed.
F [Thr 3512] *** LOG => Starting run level 2.
F
F Sat May 22 10:55:15 2010
F ********************************************************************************
F Java process [bootstrap] properties:
F section name : bootstrap
F config file : D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : Instance_bootstrap
F home directory : D:\usr\sap\CE1\J00\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 3512] *** LOG => Instance state is "Synchronizing binaries" (STARTING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Starting nodes: runlevel 2.
F ********************************************************************************
F Starting process: D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=bootstrap
F arg[ 5] = -file=D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F arg[ 6] = -jvmFile=D:\usr\sap\CE1\J00\work\jstart.jvm
F arg[ 7] = -traceFile=D:\usr\sap\CE1\J00\work\dev_bootstrap
F arg[ 8] = -javaOutFile=D:\usr\sap\CE1\J00\work\jvm_bootstrap.out
F env : JStart/ReserveSize=0x60000000
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F libPath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin;D:\usr\sap\CE1\J00\j2ee\os_libs;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F stdout : D:\usr\sap\CE1\J00\work\std_bootstrap.out
F stderr : D:\usr\sap\CE1\J00\work\std_bootstrap.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process Instance_bootstrap started with pid 3736
F ********************************************************************************
F [Thr 3512] *** LOG => Process bootstrap started (pid 3736).
F
F [Thr 3512] Sat May 22 10:55:20 2010
F [Thr 3512] *** LOG => Process bootstrap stopping (pid 3736).
F
F [Thr 3744] Sat May 22 10:55:21 2010
F [Thr 3744] *** LOG => Signal 13 SIGCHLD.
F
F [Thr 3512] Sat May 22 10:55:21 2010
F [Thr 3512] *** LOG => Process bootstrap stopped (pid 3736).
F [Thr 3512] *** WARNING => Node bootstrap failed: result 1, exit code 503. [sfxxnode.hpp 1011]
F ********************************************************************************
F Native process [snapshot] properties:
F section name : snapshot
F config file : D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : snapshot
F home directory : D:\usr\sap\CE1\J00\work
F shutdown timeout : 122000 ms
F sf support : false
F ********************************************************************************
F ********************************************************************************
F Starting process: D:\usr\sap\CE1\SYS\exe\uc\NTI386\sapcontrol.EXE
F arg[ 1] = -prot
F arg[ 2] = PIPE
F arg[ 3] = -nr
F arg[ 4] = 00
F arg[ 5] = -function
F arg[ 6] = CreateSnapshot
F arg[ 7] = Servercrash
F arg[ 8] = postmortem?node=bootstrap&exitcode=503
F arg[ 9] = 1
F arg[10] = 10000
F arg[11] = ""
F arg[12] = ""
F arg[13] = DEFAULT
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F libPath : PATH=D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F stdout : D:\usr\sap\CE1\J00\work\std_snapshot.out
F stderr : D:\usr\sap\CE1\J00\work\std_snapshot.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process snapshot started with pid 3884
F ********************************************************************************
F [Thr 3512] *** LOG => Process snapshot started (pid 3884).
F [Thr 3512] *** LOG => Process snapshot running (pid 3884).
F [Thr 3512] *** LOG => SAP Start Service (pid 1240) connected.
F [Thr 3512] *** LOG => SAP Start Service (pid 1240) disconnected.
F
F [Thr 3892] Sat May 22 10:55:29 2010
F [Thr 3892] *** LOG => Signal 13 SIGCHLD.
F
F [Thr 3512] Sat May 22 10:55:29 2010
F [Thr 3512] *** LOG => Process snapshot stopped (pid 3884).
F [Thr 3512] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Run level 2 completed.
F [Thr 3512] *** LOG => Instance state is "Some processes failed" (STOPPED @ 0, INACTIVE).
I [Thr 3512] MPI: dynamic quotas disabled.
I [Thr 3512] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
F
F ********************************************************************************
F *** ERROR => Node 'bootstrap' failed with exit code 503.
F ***
F *** Please see section 'Failures in the 'synchronizing binaries' phase'
F *** in SAP Note 1316652 for additional information and trouble shooting advice.
F ********************************************************************************
F
F [Thr 3512] *** LOG => exiting (exitcode 22002, retcode 1).<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[C:\Documents and Settings\Administrator\.sdtgui\log\SDTServer.log]/>
<!PATTERN[SDTServer.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%6s]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
May 23, 2015 10:45:07 AM [Info ]: *************************************************
May 23, 2015 10:45:07 AM [Info ]: Starting SL Controller ...
May 23, 2015 10:45:07 AM [Info ]: StorageService switched off.
May 23, 2015 10:45:07 AM [Info ]: Initializing SecurityManager ...
May 23, 2015 10:45:07 AM [Info ]: Key Store management switched off.
May 23, 2015 10:45:08 AM [Info ]: Configuring HTTPManager ...
May 23, 2015 10:45:08 AM [Info ]: WebstartService switched off.
May 23, 2015 10:45:08 AM [Info ]: RoleService switched off.
May 23, 2015 10:45:08 AM [Info ]: AlertService switched off.
May 23, 2015 10:45:08 AM [Info ]: Starting NotesService ...
May 23, 2015 10:45:08 AM [Info ]: ProcessService switched off.
May 23, 2015 10:45:08 AM [Info ]: Starting MIDService ...
May 23, 2015 10:45:08 AM [Info ]: Starting FileService ...
May 23, 2015 10:45:08 AM [Info ]: LogService switched off.
May 23, 2015 10:45:08 AM [Info ]: MailService switched off.
May 23, 2015 10:45:08 AM [Info ]: Starting services ...
May 23, 2015 10:45:08 AM [Info ]: Starting service "SAPinstService" ...
May 23, 2015 10:45:08 AM [Info ]: Service "SAPinstService" started
May 23, 2015 10:45:08 AM [Info ]: Services started.
May 23, 2015 10:45:08 AM [Info ]: Starting HTTP server listening on port 4239 ...
May 23, 2015 10:45:08 AM [Info ]: HTTP server started.
May 23, 2015 10:45:08 AM [Info ]: SL Controller started.
May 23, 2015 10:45:08 AM [Info ]: Starting GUI ...
May 23, 2015 10:45:11 AM [Info ]: GUI started.
May 23, 2015 10:46:53 AM [Info ]: *************************************************
May 23, 2015 10:46:53 AM [Info ]: Starting SL Controller ...
May 23, 2015 10:46:53 AM [Info ]: StorageService switched off.
May 23, 2015 10:46:53 AM [Info ]: Initializing SecurityManager ...
May 23, 2015 10:46:53 AM [Info ]: Key Store management switched off.
May 23, 2015 10:46:53 AM [Info ]: Configuring HTTPManager ...
May 23, 2015 10:46:53 AM [Info ]: WebstartService switched off.
May 23, 2015 10:46:53 AM [Info ]: RoleService switched off.
May 23, 2015 10:46:53 AM [Info ]: AlertService switched off.
May 23, 2015 10:46:53 AM [Info ]: Starting NotesService ...
May 23, 2015 10:46:53 AM [Info ]: ProcessService switched off.
May 23, 2015 10:46:53 AM [Info ]: Starting MIDService ...
May 23, 2015 10:46:53 AM [Info ]: Starting FileService ...
May 23, 2015 10:46:53 AM [Info ]: LogService switched off.
May 23, 2015 10:46:53 AM [Info ]: MailService switched off.
May 23, 2015 10:46:53 AM [Info ]: Starting services ...
May 23, 2015 10:46:53 AM [Info ]: Starting service "SAPinstService" ...
May 23, 2015 10:46:53 AM [Info ]: Service "SAPinstService" started
May 23, 2015 10:46:53 AM [Info ]: Services started.
May 23, 2015 10:46:53 AM [Info ]: Starting HTTP server listening on port 4239 ...
May 23, 2015 10:46:53 AM [Info ]: HTTP server started.
May 23, 2015 10:46:53 AM [Info ]: SL Controller started.
May 23, 2015 10:46:53 AM [Info ]: Starting GUI ...
May 23, 2015 10:46:56 AM [Info ]: GUI started.
May 23, 2015 10:47:19 AM [Info ]: *************************************************
May 23, 2015 10:47:19 AM [Info ]: Starting SL Controller ...
May 23, 2015 10:47:19 AM [Info ]: StorageService switched off.
May 23, 2015 10:47:19 AM [Info ]: Initializing SecurityManager ...
May 23, 2015 10:47:19 AM [Info ]: Key Store management switched off.
May 23, 2015 10:47:20 AM [Info ]: Configuring HTTPManager ...
May 23, 2015 10:47:20 AM [Info ]: WebstartService switched off.
May 23, 2015 10:47:20 AM [Info ]: RoleService switched off.
May 23, 2015 10:47:20 AM [Info ]: AlertService switched off.
May 23, 2015 10:47:20 AM [Info ]: Starting NotesService ...
May 23, 2015 10:47:20 AM [Info ]: ProcessService switched off.
May 23, 2015 10:47:20 AM [Info ]: Starting MIDService ...
May 23, 2015 10:47:20 AM [Info ]: Starting FileService ...
May 23, 2015 10:47:20 AM [Info ]: LogService switched off.
May 23, 2015 10:47:20 AM [Info ]: MailService switched off.
May 23, 2015 10:47:20 AM [Info ]: Starting services ...
May 23, 2015 10:47:20 AM [Info ]: Starting service "SAPinstService" ...
May 23, 2015 10:47:20 AM [Info ]: Service "SAPinstService" started
May 23, 2015 10:47:20 AM [Info ]: Services started.
May 23, 2015 10:47:20 AM [Info ]: Starting HTTP server listening on port 4239 ...
May 23, 2015 10:47:20 AM [Info ]: HTTP server started.
May 23, 2015 10:47:20 AM [Info ]: SL Controller started.
May 23, 2015 10:47:20 AM [Info ]: Starting GUI ...
May 23, 2015 10:47:23 AM [Info ]: GUI started.
May 23, 2015 11:27:57 AM [Info ]: Stopping services ...
May 23, 2015 11:27:57 AM [Info ]: Stopping service "SAPinstService" ...
May 23, 2015 11:27:57 AM [Info ]: Service "SAPinstService" stopped.
May 23, 2015 11:27:57 AM [Info ]: Services stopped.
May 23, 2015 11:27:57 AM [Info ]: Server shutdown by SAPinstService -
Trans.log file showing 'ERROR = CONNECT failed with sql error 12541'
Dear All
We have upgraded our datatabse from Oracle 9.2.0.8 to Oracel 10.2.0.4 on our ECC 5.0 IS-AFS SAP system. When we check version from SQL, it's showing 10.2.0.4. That means database is successfully upgraded. Now, when we login through our <SID>adm user and checking R3trans -d, it is showing
'This is R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
R3trans finished (0012).'
In the trans.log file it is showing,
4 ETW000 R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.06.2009 - 11:56:40
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Jun 22 11:56:40 2009 110 0.000
110
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000
137
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 62 0.000
199
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' ...
4 ETW000 77 0.000
276
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/VAP/SYS/exe/run/dboraslib.o), hdl
0
4 ETW000 8142 0.008
418
4 ETW000 [dev trc ,00000] Library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' loaded
4 ETW000 43 0.008
461
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/VAP/SYS/exe/r
un/dboraslib.o
4 ETW000 61 0.008
522
4 ETW000 [dev trc ,00000] Version of '/usr/sap/VAP/SYS/exe/run/dboraslib.o' is "640.00",
patchlevel (0.276)
4 ETW000 421 0.008
943
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/VAP/SYS/exe/
run/dboraslib.o
4 ETW000 46 0.008
989
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/VAP/SYS/exe
/run/dboraslib.o
4 ETW000 75 0.009
064
4 ETW000 [dev trc ,00000] New connection 0 created 48 0.009
112
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 53 0.009
165
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 55 0.009
220
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 53 0.009
273
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 49 0.009
322
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=/oracle/VAP/102_64 from environment
4 ETW000 521 0.009
843
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 84 0.009
927
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000 65 0.009
992
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 2033 0.012
025
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPVAP's password 49 0.012
074
4 ETW000 [dev trc ,00000] Connecting as /@VAP on connection 0 (nls_hdl 0) ... (dbsl 640 1
80309)
4 ETW000 57 0.012
131
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 49 0.012
180
4 ETW000 [dev trc ,00000] 0 UTF8 1
0x1113a4400 0x1113b6b00 0x1113b63b8
4 ETW000 58 0.012
238
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 48 0.012
286
4 ETW000 [dev trc ,00000] Allocating server context handle 42 0.012
328
4 ETW000 [dev trc ,00000] Attaching to DB Server VAP (con_hdl=0,svchp=0x1113b97d8,srvhp=0
x1113b99f8)
4 ETW000 95 0.012
423
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 4556 0.016
979
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error 12541.
4 ETW000 59 0.017
038
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541 39 0.017
077
4 ETW000 [dev trc ,00000] Try to connect with default password 184 0.017
261
4 ETW000 [dev trc ,00000] Connecting as SAPVAP/<pwd>@VAP on connection 0 (nls_hdl 0) ...
(dbsl 640 180309)
4 ETW000 46 0.017
307
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 48 0.017
355
4 ETW000 [dev trc ,00000] 0 UTF8 1
0x1113a4400 0x1113b6b00 0x1113b63b8
4 ETW000 48 0.017
403
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=0x1113b99f8)
4 ETW000 54 0.017
457
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0x1113b97d8,srvhp=0x1
113b99f8)
4 ETW000 54 0.017
511
4 ETW000 [dev trc ,00000] Deallocating server context handle 0x1113b99f8 42 0.017
553
4 ETW000 [dev trc ,00000] Allocating server context handle 33 0.017
586
4 ETW000 [dev trc ,00000] Attaching to DB Server VAP (con_hdl=0,svchp=0x1113b97d8,srvhp=0
x1113b99f8)
4 ETW000 54 0.017
640
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 2547 0.020
187
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error 12541.
4 ETW000 45 0.020
232
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541 28 0.020
260
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error 12541 performing CON [dblink#3 @ 428]
4 ETW000 220 0.020
480
4 ETW000 [dblink ,00428] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 428]
4 ETW000 42 0.020
522
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
Checked the listener service. It is already started and status is OK. Please help.
Regards
Shashank ShekharHi
Yes, I am trying it with orasid user also. There in trans.log file it is showing:
'4 ETW000 R3trans version 6.13 (release 640 - 07.01.08 - 14:25:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.06.2009 - 15:54:42
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Jun 22 15:54:42 2009 109 0.000
109
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000
136
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 61 0.000
197
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' ...
4 ETW000 79 0.000
276
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/VAP/SYS/exe/run/dboraslib.o), hdl
0
4 ETW000 8174 0.008
450
4 ETW000 [dev trc ,00000] Library '/usr/sap/VAP/SYS/exe/run/dboraslib.o' loaded
4 ETW000 43 0.008
493
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/VAP/SYS/exe/r
un/dboraslib.o
4 ETW000 61 0.008
554
4 ETW000 [dev trc ,00000] Version of '/usr/sap/VAP/SYS/exe/run/dboraslib.o' is "640.00",
patchlevel (0.276)
4 ETW000 430 0.008
984
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/VAP/SYS/exe/
run/dboraslib.o
4 ETW000 46 0.009
030
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/VAP/SYS/exe
/run/dboraslib.o
4 ETW000 76 0.009
106
4 ETW000 [dev trc ,00000] New connection 0 created 48 0.009
154
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 53 0.009
207
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 57 0.009
264
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 54 0.009
318
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm =
YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 49 0.009
367
4 ETW000 [dev trc ,00000] Got ORACLE_HOME=/oracle/VAP/102_64 from environment
4 ETW000 526 0.009
893
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 84 0.009
977
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000 64 0.010
041
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIEnvCreate(mode=16384)' failed: rc = -
1
4 ETW000 1464 0.011
505
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code -1 40 0.011
545
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
4 ETW000 58 0.011
603
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error -1 performing CON [dblink#3 @ 428]
4 ETW000 74 0.011
677
4 ETW000 [dblink ,00428] ***LOG BY0=>Cannot get Oracle error text. [dblink#3 @ 428]
4 ETW000 55 0.011
732
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'V
AP'"
Someone suggested 'The solution is to download the new oracle client dll into the kernel'. Can anyone tell from where i can get the client dll for the kernel.
Regards
Shashank Shekhar -
RAID 1 setup fails with POSIX error
I am trying to set up a RAID 1 array using 2 brand-new Iomega eGo 2TB Desktop Hard Drives. They are connected via Firewire 800, with the second connected to the first through Firewire pass-through. I'm on 10.6.8, on an iMac 9,1 with the 2.66Ghz Core 2 duo and 8GB RAM.
I complete all the steps to create the RAID array, add the drives to the array, select "Automatically rebuild RAID mirror sets", and when I hit "create", Disk Utility unmounts the disk, starts to create the array, and then gives me the following error.
Creating RAID set failed with the error:
POSIX reports: The operation couldn't be completed. Operation not permitted.
Am I doing something wrong in the setup? Does this mean one of the drives is a dud? Does this mean I can't create a RAID array with pass-through Firewire drives?
Any help or advice would be greatly appreciated.I ran the 1.1.1 upgrade this afternoon. I've been through the same process three times, but I was getting error 1602. Now when I unplug, reboot the Mac and reboot the phone, wait for everything to load, iPhoto recognizes the camera/pictures, but iTunes does not recognize the iPhone, and when it does, I get the spinning color wheel until I'm told that my iPhone timed out (or I get the error message above again). I've not hacked the iPhone, and even though iTunes isn't recognizing it, the phone is as fully functional as it was before the ill fated upgrade.
There is a support article but it appears to be geared towards Windows.
Error 1601 or 1602 when restoring iPhone or iPod touch in iTunes
Issue
When trying to restore your iPhone in iTunes, you may see the following message followed by an error code 1601 or 1602:
The iPhone could not be restored. An unknown error occurred.
Or when trying to restore your iPod touch in iTunes, you may see the following message:
The iPod "[username]" could not be restored. An unknown error occurred (1602)
Products affected
iPhone
iPod touch
iTunes 7.4 or later
Solution
Restart the computer and try to restore the iPhone or iPod touch again.
Completely remove iTunes and Apple Mobile Device support and then reinstall iTunes. Select the appropriate link below for instructions on how to accomplish this for your operating system.
Windows XP
Windows Vista
Try restoring the iPhone or iPod touch on a different computer using iTunes (if another computer is available).
Message was edited by: Lane Baysden -
Rendering of Proxies in AE fails with generic error messages.
*sigh* working with AVC in CS4 on my quad core has been an exercise in pain.
I've followed the optimization guides linked to in the different forum posts and that lets me zip along until I actually start adding effects. Then I am right back to a crawl. I recently discovered proxies in AE and learned that I can use "replace" in premeire to leverage those same proxies... Sweet... When I works I am back to editing in both in real time!
The problem is AE is regularly failing to generate proxies for me and I cannot figure out why. All my video is shot the same 24mbps, 60fps, 1080p (true 60i). All shot from my Canon HF S10.
The error is always "Error reading frame from file" and it always occurs just before the render is about to complete. Sometimes I get lucky and a working .mov was generated in spite of the error. Bu most times the file isn't there.
So my 2.4ghz quad core with 8gb ram can't edit the originals and I can't create proxies... I'm effectively dead in the water.
I tried using Media Encoder to generate my proxies with no success either. It fails with "Unspecified Error".
Both times I am trying to encode to Quicktime, Jpeg, Draft Settings. For the heck of it I tried different codecs, etc. Nothing seems to help. Even worse is sometimes if I just queue the same file multiple times it eventually works.
Is there anything at all I can do to make successful proxy generation less like winning the lottery?Yeah I updated to that right away. Premiere itself seems to behave most of the time. To be honest I've hardly had any problems with Premiere even before the 4.2 update.
But AVC (mts files) seem to be very problematic in AE in general. I also experience the issue mentioned here:
http://forums.adobe.com/message/2404464
Sounds like re-encoding to another format is the only way I'll be able to work in AE reliably. So I have to figure out a way to get Media Encoder to finish it's jobs. -
Cube refresh fails with an error below
Hi,
We are experiencing this problem below during planning application database refresh. We have been refreshing the database everyday, but all of a sudden the below error is appearing in log. The error is something like below:
Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.EOFException
When the database refresh is done from workspace manually, the database refresh is happening successfully. But when triggered from unix script, its throwing the above error.
Is it related to some provisioning related issue for which user has been removed from MSAD?? Please help me out on this.
Thanks,
mani
Edited by: sdid on Jul 29, 2012 11:16 PMI work with 'sdid' and here is a better explaination of what exactly is going on -
As part of our nightly schedule we have a unix shell script that executes refresh of essbase cubes from planning using the 'CubeRefresh.sh' shell script.
Here is how our shell looks like -
/opt/hyperion/Planning/bin/CubeRefresh.sh /A:<cube name> /U:<user id> /P:<password> /R /D /FS
Here is what 'CubeRefresh.sh' looks like -
PLN_JAR_PATH=/opt/hyperion/Planning/bin
export PLN_JAR_PATH
. "${PLN_JAR_PATH}/setHPenv.sh"
"${HS_JAVA_HOME}/bin/java" -classpath ${CLASSPATH} com.hyperion.planning.HspCubeRefreshCmd $1 $2 $3 $4 $5 $6 $7
And here is what 'setHPenv.sh' looks like -
HS_JAVA_HOME=/opt/hyperion/common/JRE/Sun/1.5.0
export HS_JAVA_HOME
HYPERION_HOME=/opt/hyperion
export HYPERION_HOME
PLN_JAR_PATH=/opt/hyperion/Planning/lib
export PLN_JAR_PATH
PLN_PROPERTIES_PATH=/opt/hyperion/deployments/Tomcat5/HyperionPlanning/webapps/HyperionPlanning/WEB-INF/classes
export PLN_PROPERTIES_PATH
CLASSPATH=${PLN_JAR_PATH}/HspJS.jar:${PLN_PROPERTIES_PATH}:${PLN_JAR_PATH}/hbrhppluginjar:${PLN_JAR_PATH}/jakarta-regexp-1.4.
jar:${PLN_JAR_PATH}/hyjdbc.jar:${PLN_JAR_PATH}/iText.jar:${PLN_JAR_PATH}/iTextAsian.jar:${PLN_JAR_PATH}/mail.jar:${PLN_JAR_PA
TH}/jdom.jar:${PLN_JAR_PATH}/dom.jar:${PLN_JAR_PATH}/sax.jar:${PLN_JAR_PATH}/xercesImpl.jar:${PLN_JAR_PATH}/jaxp-api.jar:${PL
N_JAR_PATH}/classes12.zip:${PLN_JAR_PATH}/db2java.zip:${PLN_JAR_PATH}/db2jcc.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/css-9_
3_1.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/ldapbp.jar:${PLN_JAR_PATH}/log4j.jar:${PLN_JAR_PATH}/log4j-1.2.8.jar:${PLN_JAR_
PATH}/hbrhppluginjar.jar:${PLN_JAR_PATH}/ess_japi.jar:${PLN_JAR_PATH}/ess_es_server.jar:${PLN_JAR_PATH}/commons-httpclient-3.
0.jar:${PLN_JAR_PATH}/commons-codec-1.3.jar:${PLN_JAR_PATH}/jakarta-slide-webdavlib.jar:${PLN_JAR_PATH}/ognl-2.6.7.jar:${HYPE
RION_HOME}/common/CLS/9.3.1/lib/cls-9_3_1.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/EccpressoAll.jar:${HYPERION_HOME}/common/
CLS/9.3.1/lib/flexlm.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/flexlmutil.jar:${HYPERION_HOME}/AdminServices/server/lib/easse
rverplugin.jar:${PLN_JAR_PATH}/interop-sdk.jar:${PLN_JAR_PATH}/HspCopyApp.jar:${PLN_JAR_PATH}/commons-logging.jar:${CLASSPATH
export CLASSPATH
case $OS in
HP-UX)
SHLIB_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${SHLIB_PATH:-}
export SHLIB_PATH
SunOS)
LD_LIBRARY_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LD_LIBRARY_PATH:-}
export LD_LIBRARY_PATH
AIX)
LIBPATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LIBPATH:-}
export LIBPATH
echo "$OS is not supported"
esac
We have not made any changes to either the shell or 'CubeRefresh.sh' or 'setHPenv.sh'
From the past couple of days the shell that executes 'CubeRefresh.sh' has been failing with the error message below.
Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.EOFException
This error is causing our Essbase cubes to not get refreshed from Planning cubes through these batch jobs.
On the other hand the manual refesh from within Planning works.
We are on Hyperion® Planning – System 9 - Version : 9.3.1.1.10
Any help on this would be greatly appreciated.
Thanks
Andy
Edited by: Andy_D on Jul 30, 2012 9:04 AM -
At DI R3trans fails with this error code ORA-12545, but CI runs
Hello Gurus,
We have our BW System on two instances with a separated oracle database server.
Last week the system was unreachable and we must restarted it hard.
After that, the Listener could started and runs. The DB could started, mounted and opened successfully.
Now we have a special problem.
The central instance can connect at startup to the database. But the dialog instance not.
The DI get the following error:
|> R3trans -x
This is R3trans version 6.14 (release 701 - 12.06.09 - 15:20:00).
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'BW2'"
R3trans finished (0012).
The trans.log entry are:
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541' 17 0.187511
4 ETW000 [dev trc ,00000] set_ocica() -> SQL error code 12541 13 0.187524
4 ETW000 [dev trc ,00000] -->oci_get_errmsg (con_hdl=0, rc=12541) 14 0.187538
4 ETW000 [dev trc ,00000] OCIErrorGet -> SQL error code: 12541 14 0.187552
4 ETW000 [dev trc ,00000] ORA-12541: TNS:no listener
4 ETW000 22 0.187574
4 ETW000 [dblink ,00433] ***LOG BY2=>sql error 12541 performing CON [dblink#4 @ 433] 14396 0.201970
4 ETW000 [dblink ,00433] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#4 @ 433] 39 0.202009
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'BW2'"
A telnet connection test to port 1527 are also unsuccessful.
But sporadicly the telnet or R3trans connection are successful, but the second check are unsuccessful.
We have checked the telnet connection to another oracle database server (ERP) at port 1527 and it works.
The CI have some entry's in ST22 with DBIF_RSQL_SQL_ERROR --> ORA-03114: not connected to ORACLE.
Are someone known something about this issue?
regards
Chris@ Sunny Pahuja:
We checked sapmnt.
Sapmnt is common on CI and DI. It was never mounted on DB. But DB runs perfectly until this issue.
@ Ankit Gupta
We checked the configuration of listener.
It is the same like the listener configuration of our ERP system with CI, DI and DB on separate Servers, too.
@ Rajesh Narkhede
From DB Server
|> tnsping BW2
TNS Ping Utility for IBM/AIX RISC System/6000: Version 10.2.0.2.0 - Production on 06-MAY-2010 07:40:56
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/BW2/102_64/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP)
(HOST = bw2dba) (PORT = 1527))) (CONNECT_DATA = (SID = BW2) (GLOBAL_NAME = BW2.WORLD)))
OK (100 msec)
On CI and DI we don't have tnsping.
Just copy it don't work.
|> tnsping BW2
TNS Ping Utility for IBM/AIX RISC System/6000: Version 10.2.0.2.0 - Production on 06-MAY-2010 08:39:17
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Message 3511 not found; No message file for product=network, facility=TNS
Message 3512 not found; No message file for product=network, facility=TNS
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP)
(HOST = bw2dba) (PORT = 1527))) (CONNECT_DATA = (SID = BW2) (GLOBAL_NAME = BW2.WORLD)))
Message 3509 not found; No message file for product=network, facility=TNS
How to get it on the CI and DI. In the SAR files at SAP it is not included. I can't found something in the Web. -
i ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.
What's the error mesage?
Maybe you are looking for
-
Upon startup, myG40 shows the POST page, then I hear a high pitch noice briefly, and the display goes dark. The external video connector does work, but the lcd screen stays dark. I have a second machine that I can use for parts. Can someone recommen
-
Which LCD screen do I need for replacement?
Hi, I'm looking to switch out my damaged LCD screen for my BB Curve 8530. I've had a look at purchasing a replacement online, but have noticed there are 3 different kinds. How can I tell which one I need without opening the phone up first. 004/005 or
-
Stage Flashes White On Browser
At one time, the stage did not show up in my Edge splash page at http://www.lingersguideservice.com but now the stage shows up as very briefly before the Edge project works on the page. Is there a way to prevent. This started in the past couple of da
-
Problems with adobe flash player popup
Hello . Every time I download the Adobe Flash Player, a popup appears that comes up every time I click the mouse. I click the "don't allow" button and it goes away. But, it comes up again when I go to a different webpage or click the mouse again. I h
-
Lizenz-Probleme mit Mocha After Effects CC
Hallo, Wenn ich ein .m4v Video aufrufen will, dass ich mit iphoto erstellt habe (Imac) erscheint der Hinweis License Error: mocha AE CC must only be launched from After Effects. Wenn ich AE deinstalliere, läßt sich das Video öffnen, aber das kann ja