Vritual Fibel adapter failed to start the Virtual Machine

Hi All,
I have installed windows server 2012 R2 RTM with Hyper-V. I have created virtual machine with virtual fiber channel adapter connected to physical one. When I start the virtual machine it gets failed to start and the following error occurs.
Thanks,

take a lool on that
http://social.technet.microsoft.com/wiki/contents/articles/18698.hyper-v-virtual-fibre-channel-troubleshooting-guide.aspx
I guess also that some Part of the Chain do not Support all needed Settings like NPIV.
dealing with vFC inside a Guest ist really tricky and following Support Matrix is really key, it starts on the FCP SAN Array and Ends up having the latest Hotfixes regarding vFC Problems. Between you need to have all Setup right and supported Drivers,
FW and so on.
In my view using this Feature you loss the my most Importent Sexy Thing why i do Virtualisation ? beeing seperate from the HW Layer.
Udo

Similar Messages

  • Hyper-V - 'Failed to start the virtual machine 'test' because one of the Hyper-V components is not running.'

    Hi all,
    Having a bit of a nightmare with Hyper-V on my Windows 8 Pro laptop - Whenever I create a new VM and try to start it I receive the following error;
    'Failed to start the virtual machine 'test' because one of the Hyper-V components is not running.'
    I sometimes also receive an error saying something along the lines of 'Unable to change virtual machine state'
    I have done a lot of searching a seen two common answers - The first is to try removing the Hyper-V role and re-adding it - I have tried this several times to no avail. (Intel VT and all virtualisation capabilities are enabled in BIOS). The second issue
    it would seem
    some people have had relates to editing the VMX configuration file and adding the line
    hypervisor.cpuid.v0 = "FALSE" - I thought VMX files were only present in VMware Virtual Machines...
    Any help would be greatly appreciated.
    Many thanks in advance.
    James

    The hypervisor event log message is generated only at boot - so this would be expected.  Also vmbus should not be running on the host (I was looking at a VM yesterday)...  This error message is generated only when the vid is determined not to be
    running or cannot communicate with the hypervisor.
    I have seen this due to anti-virus software in the past or due to driver verifier being configured.  Since it looks like you checked driver verifier already do you have anti-virus software installed?  If so have you followed the best practices
    and exempted the Hyper-v services? 
    http://technet.microsoft.com/en-us/library/dd283088(WS.10).aspx
    To resolve this problem, configure the real-time scanning component within your antivirus software to exclude the following directories and files:
    Default virtual machine configuration directory (C:\ProgramData\Microsoft\Windows\Hyper-V)
    Custom virtual machine configuration directories
    Default virtual hard disk drive directory (C:\Users\Public\Documents\Hyper-V\Virtual Hard Disks)
    Custom virtual hard disk drive directories
    Custom replication data directories, if you are using Hyper-V Replica
    Snapshot directories
    Vmms.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
    Vmwp.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
    -Taylor Brown<br/> -Program Manager, Hyper-V<br/> -http://blogs.msdn.com/taylorb

  • Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine

    I have Hyper-v running on Dell Precision T3600 with Windows 8 OS.  I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
    "Windows8VM" failed to start.
    Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
    "Windows8VM" failed to start.  (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
    The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
    I have turned the hyper-v feature on in the "Turn Windows feature on or off.  The BIOS has virtualization enable.  Help!!! driving me nuts for a week now.
    Nick :(

    Okay,  I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration.  Made sure that both Virtualization and VT for Direct I/0 are on.  Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
    the DVD point to Windows8 ISO file on hard drive.  When I clicked on start, it stayed in the Starting status mode for about 5 minutes.  Then of course it failed.  I looked at the Hyper-V-VMMS log and here is what it output:
    Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
    1) Error: The virtualization infrastructure driver (VID) is not running.
    2) Info:  Found a certificate for server authentication. Remote access to virtual machines is now possible.
    3) Info:  Successfully started the Virtual Machine migration connection manager.
    4) Info:  Virtual Machine Management service is started successfully.
    5) Info:  The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
    6) Info:  The WMI provider 'VmmsWmiEventProvider' has started.
    7) Info:  The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
    8) Info:  The WMI provider 'VmmsWmiEventProvider' has started.
    9) Info:  The Integration Services Setup Disk image was successfully updated.
    10) Error: The virtual machine bus is not running.
    11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
    12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
    13) Error:  The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
    14) Error:  'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
    Nick

  • An error occured when trying to start the virtual machine

    I am getting an error whn trying to start an hyperv vm. The error is shown attached. any idea?

    Hi,
    Please confirm you dismount that guest VM disk first and did you install the AV soft on Hyper-V host? If yes, also please try to disable the AV soft then try to start the
    guest vm again.
    More information:
    Antivirus and Hyper-V (or: Why can’t I start my virtual machine?)
    http://blogs.msdn.com/b/virtual_pc_guy/archive/2009/03/17/antivirus-and-hyper-v-or-why-can-t-i-start-my-virtual-machine.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I cant start 2 Virtual machines at the same time in a Hyper-V enabled machine

    Hi,
    I have installed Windows 2008 Enterprise edition. Updated all patched from windows updated. Add the Hyper-V role and installed Windows 2003 in one Virtual Machine and Windows 2008 in another. After the first VM installation itself i had the problem as the below error was coming ibn.
    I has to shutdown the Windows 2003 to install Windows 2008.
    Now i can only run 1 OS at a time. Shut down 1 to start the other
    [Window Title]
    Hyper-V Manager
    [Main Instruction]
    An error occurred while attempting to change the state of virtual machine New Virtual Machine.
    [Content]
    'New Virtual Machine' failed to start.
    Microsoft Emulated IDE Controller (Instance ID {83F8638B-8DCA-4152-9EDA-2CA8B33039B4}): Failed to power on with Error 'The process cannot access the file because it is being used by another process.'
    Failed to open attachment 'E:'. Error: 'The process cannot access the file because it is being used by another process.'
    [Expanded Information]
    'New Virtual Machine' failed to start. (Virtual machine 418ACD0E-5FBA-4053-AFDD-1EDA51694EF5)
    'New Virtual Machine' Microsoft Emulated IDE Controller (Instance ID {83F8638B-8DCA-4152-9EDA-2CA8B33039B4}): Failed to power on with Error 'The process cannot access the file because it is being used by another process.' (0x80070020). (Virtual machine 418ACD0E-5FBA-4053-AFDD-1EDA51694EF5)
    'New Virtual Machine': Failed to open attachment 'E:'. Error: 'The process cannot access the file because it is being used by another process.' (0x80070020). (Virtual machine 418ACD0E-5FBA-4053-AFDD-1EDA51694EF5)
    Hide details  [Close]
    Any help is of great use.
    REgards
    Sharath

    I have both the vm's created in different drives. E drive is my DVD drive....
    I renamed them,Reinstalled OS, Created a new set of vm's after the first i get the error
    It works fine if i stop 1 vm and install the other or stop 1 and start the other...Running both at the same time is the problem

  • Blade server is start but virtual machine is not started

    i have a oracle virtual machine on blade server if any outage or planned activity is done the blade server is started automatically but virtual machines is not started
    manually start the virtual machines any suggestions kindly share me.

    Hi user,
    As long as youhave access to the linux sever from your windows server, you're good to go. Open your admin tool, go to File --> Open --> Offline.
    The Open window pops up. On the "File Name" field, enter the path of rpd file in the linux server (Ex: \\Server_Name\local\MyRpd.rpd). Select the file, and voilà!
    I hope this helps.
    J.

  • Message "Failed to create Java Virtual Machine" after starting Design Studio 1.2 SP1

    Hi experts,
    after I installed the SP1 of Design Studio 1.2 I become the Message "Failed to create java virtual machine" and I´m not able to start the Design Studio.
    My java version is 1.7
    My SapDesignStudio.ini File (C:\Program Files\SAP BusinessObjects\Design Studio) looks like as follow:
    -startup
    plugins/org.eclipse.equinox.launcher_1.3.0.v20130327-1440.jar
    --launcher.library
    plugins/org.eclipse.equinox.launcher.win32.win32.x86_1.1.200.v20130521-0416
    -name
    SAP
    BusinessObjects
    Design
    Studio
    -vmargs
    -Xmx1024m
    -Xms256m
    -XX:PermSize=32m
    -XX:MaxPermSize=512m
    -XX:+HeapDumpOnOutOfMemoryError
    -Dfile.encoding=UTF-8
    -Dosgi.requiredJavaVersion=1.6
    -Djava.net.preferIPv4Stack=true
    -Djdk.xml.entityExpansionLimit=0
    -Djavax.net.ssl.trustStoreProvider=SunMSCAPI
    -Djavax.net.ssl.trustStoreType=Windows-ROOT
    -Dorg.osgi.framework.os.name=win32
    Any ideas or experiences?
    Many thanks and regards,
    Michael

    Hello Max,
    many thanks for your reply and your in my case absolutely correct answer!
    In respect to your solution proposal I have renamed my Analysis-workspace folder to "Analysis-workspace-V0"
    After I have started the Design Studio 1.2 SP1 a new Analysis workspace folder was created with the typical standard name "Analysis-workspace"
    So I have my old Design Studio Application and an new empty Analysis folder.
    By the way, in my case in addition to the folder rename it was necessary to change the -Xmx Value (SapDesignStudio.ini File) a little bit lower as in standard (in the DS1.2 SP1 setting) 1024m. To become not the Message "Failed to create Java Virtual Machine" I have changed the -Xmx Value from 1024m to 512m.
    Now I´m able to start the Design Studio 1.2 SP1 as expected without Message and without breaks down after 5-6 seconds during the startup.
    Thanks again!
    Best regards,
    Michael

  • Remote Desktop Virtualization Host failed to get redirection authentication information from the virtual machine

    Hello,
    When implementing a VDI solution, I'm getting an error on our virtualization host server.  The error is:
    Remote Desktop Virtualization Host failed to get redirection authentication information from the virtual machine [VDI-PC].
    Hresult 0x8000FFFF
    Event ID 8467, Severity: Warning, Source: Microsoft-Windows-TerminalServices\TSV\VmHostAgent
    This error happens every time a user or admin connects to a VDI desktop.  This is a fresh install of Remote Desktop Services on completely fresh servers.  This is in testing and we have not ever had it working before without the error.
    Topolgy: Server2012 R2, Windows 7
    Srv-RDCB1: Is the connection broker and Web Access server.  It is Virtualized thru Hyper=V.
    Srv-RDVH1: Is the virtualization host.  It is a physical server. It also has a separated hyper-v role (for RDS VDI deployment).
    Everything seems to be functional other than this error in the log, and I haven't found any information on what this could mean.
    Any help is greatly appreciated, thanks!

    Hello. I have this trouble too.
    All roles on one server.
    Deployment type - Quick start
    Deployment Scenario Virtual mashine-based desktop deplyment
    Reinstall all roles 2 times
    Warning TerminalServices-TSV-VmHostAgent
    8467 Orchestration
    Remote Desktop Virtualization Host failed to get redirection authentication information from the virtual machine [per-0] . 
    Hresult: 0x8000FFFF
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
      <Provider Name="Microsoft-Windows-TerminalServices-TSV-VmHostAgent" Guid="{92618A87-2F6A-4B75-9AE2-E77BE7EAF43C}"
    />
      <EventID>8467</EventID>
      <Version>0</Version>
      <Level>3</Level>
      <Task>22</Task>
      <Opcode>14</Opcode>
      <Keywords>0x4000000000000000</Keywords>
      <TimeCreated
    SystemTime="2014-11-11T13:24:45.579138000Z" />
      <EventRecordID>1655</EventRecordID>
      <Correlation
    ActivityID="{F4200EF7-FEDD-4CAD-9F5D-6219A5F30000}" />
      <Execution ProcessID="3164" ThreadID="13164" />
      <Channel>Microsoft-Windows-TerminalServices-TSV-VmHostAgent/Operational</Channel>
      <Computer>blade2.vzfei.local</Computer>
      <Security UserID="S-1-5-20" />
      </System>
    <UserData>
    <EventXML xmlns="Event_NS">
      <param1>per-0</param1>
      <param2>0x8000ffff</param2>
      </EventXML>
      </UserData>
     </Event>
    In RD Gateway Manager, right-click on the RD RAP and click Properties.  On Network Resources tab select
    “Allow users to connect to any network resource”.
    not work.

  • Fail to deploy the "Virtual Shop Lite " Sample

    Fail to deploy the "Virtual Shop Lite " Sample in
    SAP Netweaver J2EE Preview (Release SAP NetWeaver™ 2007).
    I select the SAP Server node and choose Publish from the context menu. The SAP NetWeaver Developer Studio switches to the Deploy View Console view.
    At this time, the "Logon to SAP J2EE Engine" window appear.
    I enter the below user and password.
    user : Administrator
    password : <master-password>
    In the Deploy View Console, the below messages appear:
    com.sap.ide.eclipse.deployer.api.AuthenticationException:
    [#1]:Session::checkForTicketException:[Base Login Exception], cause=The user account is expired,or not valid yet.[more]
    [#1]:DC API is trying to connect to "localhost:50004".
    What should I do ?
    (I try the 10th time but the result is the same.)

    Same problem:
    Fail to deploy the "Virtual Shop Lite " Sample
    Is it a BUG ???

  • Fail to deploy the "Virtual Shop Lite " Sample in

    Fail to deploy the "Virtual Shop Lite " Sample in
    SAP Netweaver J2EE Preview (Release SAP NetWeaver™ 2007).
    I select the SAP Server node and choose Publish from the context menu. The SAP NetWeaver Developer Studio switches to the Deploy View Console view.
    At this time, the "Logon to SAP J2EE Engine" window appear.
    I enter the below user and password.
    user : Administrator
    password : <master-password>
    In the Deploy View Console, the below messages appear:
    com.sap.ide.eclipse.deployer.api.AuthenticationException:
    [#1]:Session::checkForTicketException:[Base Login Exception], cause=The user account is expired,or not valid yet.[more]
    [#1]:DC API is trying to connect to "localhost:50004".
    What should I do ?
    (I try the 10th time but the result is the same.)

    see the below link (same problem):
    Deploying Virtual Shop Lite
    I think it may be a BIG BUG.
    You can see it by yourself.

  • File adapter fails to pickup the complete file

    Hi Guys,
    I have a file to idoc scenario configured.
    Sender is an FTP server and the file type is XML
    Here are the details of my file adapter
    FTP Connection parameters,
    Connect Mode      : Permanently
    Transfer Mode     : Binary
    Processing parameters,
    QoS     : Exactly Once
    Poll Interval     : 15 secs
    Processing Mode     : Archive
    Most of the time my scenario works perfectly fine.
    And sometimes my file adapter fails to pickup the complete xml file and my scenario fails.
    The file is read partially and my mapping throws an error.
    Am i missing any parameter to be set in File adapter???
    Thanks in Advance,
    BBnu

    >>The file is read partially and my mapping throws an error.
    Thats the normal behaviour of XI,if you get a partial file,you will get a error message.
    There are several work arounds for this,first of all have a script independant of XI which is running on FTP server,this script will keep on checking for modifications in file and once the file is completely written,it will rename the file to some other extension(for e.g .dat) and XI file adapter will only pick .dat file,this will make sure that only complete files are picked up.
    Second option is to have a tag all the way in the end of XML which says EOF(of any other character),in your mesage mappin create the root node of target only if this last tag is EOF.Since in incomplete file you will not have this last tag,message processing will stop.
    Thanx
    Aamir

  • 'SERVERNAME' failed to perform the operation. The virtual machine is not in a valid state to perform the operation. (Virtual machine ID "GUID")

    DPM 2012 R2
    Server 2012 R2 and Server 2012 (R1). Both CSV volumes and Hyper-V hosts with non clustered volumes.
    ISCSI Attached Storage. (Nimble SAN)
    Every time a VM backup is made this error message occurs:
    "'SERVERNAME' failed to perform the operation. The virtual machine is not in a valid state to perform the operation. (Virtual machine ID "GUID")"
    The backup seems to finish fine most of the time, but it also seems to be causing some VM's to be in a hung/frozen state when this happens.

    Hi Nordland,
    So it seems that there are some non-backup operation that is trying to occur on the Virtual machine while the backup is in progress. Does this VM have replication enabled on it. Is there a Hyper-V replica server to which this machine get's replicated?
    Regards,
    Siddharth Jha

  • Unable to import Thesaurus in SharePoint 2013 - Failed to start the flow

    I am having issue with importing Thesaurus into SharePoint 2013. I have tried with seed file on local and remote server without success. On ULS stack, it lists  "Cannot start flow. The admin service is unavailable". But if
    I retrieve status of search topology, it lists admin components (running on two app server) are active. Any idea how this could be resolved or direction I can head to?
    This is what I have tried :
    PS C:\Users\user> $sa = Get-SPEnterpriseSearchServiceApplication
    PS C:\Users\user> Import-SPEnterpriseSearchThesaurus -SearchApplication $sa -FileName \\server_name\testThesaurus.csv 
        + CategoryInfo          : ResourceUnavailable: (Microsoft.Offic...aurusDictionary:ImportThesaurusDictionary) [Import-SPEnterpriseSearchThesaurus],  
       InvalidOperationException
        + FullyQualifiedErrorId : Microsoft.Office.Server.Search.Cmdlet.ImportThesaurusDictionary
    On ULS I get the following entries:
    CtsConnection.StartFlow: Failed to start the flow: Microsoft.ThesaurusDeployment. Exception: System.ServiceModel.FaultException: Cannot start flow. The admin service is unavailable.    Server stack trace:     
     at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)    
     at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)    
     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)    
     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown
     at [0]:     
     at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)    
     at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)    
     at Microsoft.Ceres.ContentEngine.Services.ContentIntegrationEngine.IContentIntegrationEngineManagementAgent.ExecuteFlow(String name, FlowEvaluationConfig config)    
     at Microsoft.Ceres.ContentEngine.ComponentClient.CtsConnection.StartFlow(String flowName, IDictionary`2 parameters)
    MK Sin

    Hi,
    Please check if it is related to the primary search host controller, make sure it is enabled for the farm, then check results again.
    $searchApp = Get-SPEnterpriseSearchServiceApplication
    Get-SPEnterpriseSearchLinguisticComponentsStatus -SearchApplication $searchApp
    Get-SPEnterpriseSearchHostcontroller
    Import-SPEnterpriseSearchThesaurus -SearchApplication $searchApp -Filename \\sp\custom_thesaurus.csv
    Thanks
    Daniel Yang
    TechNet Community Support

  • I fail to start the sap server with error:Operating system call recv failed

    I fail to start the sap server in SAP R3 Management Console and the message in the syslog was :
    R/3 Basis System: Operating system call           recv failed (error no. 10053)
    Is there any one could tell me how to resolve the problem or give me some advice?I will appreciate him/her very much.Thank you.

    trc file: "dev_disp", trc level: 1, release: "620"
    Sun May 07 13:14:30 2000
    kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
    length of sys_adm_ext is 304 bytes
    systemid   560 (PC with Windows NT)
    relno      6200
    patchlevel 0
    patchno    674
    intno      20020600
    pid        3628
    ***LOG Q00=> DpSapEnvInit, DPStart (00 3628) [dpxxdisp.c   978]
         shared lib "dw_xml.dll" version 674 successfully loaded
         shared lib "dw_xtc.dll" version 674 successfully loaded
         shared lib "dw_stl.dll" version 674 successfully loaded
    Sun May 07 13:14:32 2000
    WARNING => DpNetCheck: NiAddrToHostCanon() took 2 seconds
    Sun May 07 13:14:37 2000
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3212]
    MtxInit: -2 0 0
    DpShMCreate: sizeof(wp_adm)          12784     (752)
    DpShMCreate: sizeof(tm_adm)          1690816     (8412)
    DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpShMCreate: sizeof(comm_adm)     192000     (384)
    DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 001E0040, size: 1977824)
    DpShMCreate: allocated sys_adm at 001E0040
    DpShMCreate: allocated wp_adm at 001E0560
    DpShMCreate: allocated tm_adm_list at 001E3750
    DpShMCreate: allocated tm_adm at 001E3778
    DpShMCreate: allocated wp_ca_adm at 00380438
    DpShMCreate: allocated appc_ca_adm at 00384A88
    DpShMCreate: allocated comm_adm_list at 003861F8
    DpShMCreate: allocated comm_adm at 00386210
    DpShMCreate: allocated ca_info at 003B5010
    DpShMCreate: allocated wall_adm at 003B5018
    MBUF state OFF
    Sun May 07 13:14:38 2000
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation std
    <EsNT> Memory Reset enabled as NT default
    <EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
    <ES> 2457 blocks reserved for free list.
    ES initialized.
    ***LOG Q0K=> DpMsAttach, mscon ( db01) [dpxxdisp.c   9115]
    CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6200, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   941]
    DpMsgAdmin: Set patchno for this platform to 674
    Release check o.K.
    Sun May 07 13:15:18 2000
    ERROR => W2 (pid 4776) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W2
    Sun May 07 13:15:38 2000
    ERROR => W5 (pid 4548) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W5
    ERROR => W8 (pid 4592) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W8
    ERROR => W9 (pid 4584) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W9
    ERROR => W12 (pid 4676) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W12
    ERROR => W13 (pid 4272) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W13
    my types changed after wp death/restart 0xbf --> 0xb7
    Sun May 07 13:15:58 2000
    ERROR => W4 (pid 4888) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W4
    ERROR => W6 (pid 4788) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W6
    ERROR => W15 (pid 4596) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W15
    Sun May 07 13:16:18 2000
    ERROR => W1 (pid 4892) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W1
    ERROR => W3 (pid 4904) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W3
    ERROR => W7 (pid 4000) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W7
    ERROR => W10 (pid 4864) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W10
    my types changed after wp death/restart 0xb7 --> 0xb5
    Sun May 07 13:16:38 2000
    ERROR => W0 (pid 4900) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W0
    ERROR => W11 (pid 4500) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W11
    ERROR => W14 (pid 4636) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W14
    ERROR => W16 (pid 3532) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W16
    my types changed after wp death/restart 0xb5 --> 0x80
    DP_FATAL_ERROR => DpEnvCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    DpModState: change server state from STARTING to SHUTDOWN
    Sun May 07 13:16:42 2000
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9341]
    MBUF state OFF
    MBUF component DOWN
    ***LOG Q05=> DpHalt, DPStop ( 3628) [dpxxdisp.c   7883]

  • Javax.resource.ResourceException: Failed to start the connection

    I have created the JMS bridge in Weblogic10.0 to connect with MQ server, I am getting error when startingup the weblogic server. Below the error
    ####<28-Mar-2009 10:56:25 o'clock GMT> <Info> <MessagingBridge> <clx25ao02> <aauat100-02> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1238237785804> <BEA-200042> <Bridge MQ_TO_JMS_1 failed to connect to the source destination and will try again in 20 seconds. This could be a temporary condition unless the messages repeat several times. (javax.resource.ResourceException: Failed to start the connection)>
    I deployed the JMS adaptor also in weblogic10.0.
    Could you please tell me the reason for the error?

    A problem occurred with a Messaging Bridge between two JMS topics running in two Managed
    Servers in the same domain, running on the same machine. As the Messaging Bridge was being
    started during WebLogic Server startup, it threw the following warning message. Messages
    could not be forwarded.
    Analysis revealed that the bridge failed to create the message listener because it was
    configured for durable topics and there was no JMS store available. The Bridge encountered an
    internal error when trying to log the resource exception so the customer was not able to tell
    why the bridge was failing.
    The problem was resolved by a code change to allow the bridge to throw the correct resource
    exception. Now, the correct exception is logged by the bridge.

Maybe you are looking for