VTFL copy control settings not visible

hi
i am facing some problem in copy control settings - vtfl - delivery to billing type copy control
when i am doing the required settings i.e copying ZLLZ delivery to ZFD billing type and saving the settings, a transport request is being generated and also it says tht data has been saved,but when i see the list i cannot see the new copy control tht i did.
i can see these entries in the table TVCPF. but these entries shows billing type ZFD n delivery type ZLLZ
along with additional entry in sales doc column as "ED"
i am not able to understand from where this entry is being picked...
an why i cant see the entries at VTFL
can anyone help.

Hi friend,
Please try to check you documents in transaction code VTFL by giving the Billing document (first) and the delivery document.
Definitely you can find the combination
And for your another question , In the table TVCPF you can see the sales document type ED which would have maintained in the VTAF copy controls from the Sales document to Billing documents
Please let me know if you have further queries.
santosh

Similar Messages

Copy control settings for Multilevel variant configuration

Dear All,
I have the following scenario for variant configuration A quotation is created for configurable material with multilevel configurable material
with reference to this quoatation a sales order is created.
My requirement is that the quoatation must get copied to sales order as it is along with the values for subitems also.
In copy control settings there is a field at item level called
configuration :
In this if I maintain value
A: The variant is getting copied but the values for subitems is not getting copied the values for main material is in changable mode.
B: The variant is getting copied but the values for subitems is not getting copied the values for main material are not in changable mode.
C:The variant is getting copied   the values for subitems is getting copied the values for main material are in changable mode but the values for subitems are not in changable mode.
My requiremnt is that
The variant must get copied
the values for subitems must get copied
the main material vlaues must be in changable mode
the subitems vlaues must be in changable mode
How can I fullfill this requiremnt, has any one of you come across this scenario, Pleae provide with solution it is urgent
Informative answers will be provided maximum points.
Deepak

Hai Deepak Mehmi,
please check in T CODE VTAA
In the position check
SalesDocType : Sales order type
SalesDocType : Inquiry type
Double clcik and check
DataT 051 General header data       Copying requirements 002 Header-diff.customer
DataT 101 Header business data
DataT 001 Partner header
And Tick mark for Copy Item Number
For further check:
In Item
                                  Copying requirements 301
DataT 151 General item data                                          Pos./neg. quantity   +
                                                           Copy quantity
DataT 102 Bus.data/item compl.                                     Pricing type         G
DataT 002 Partner item                       2 Update document flow   Cont. item copy mode
                                                    Copy product select.
FPLA 251 Conditions                Configuration
                                                           Campaign Deter.
Regards,
Mani

Copy control Settings from a Quotaion to Value contract/Quantity Contract

Hello Friends,
I would like to know whether it is possible to create a Value/Quantity contract in R3 with reference to a Quotation,Currently I am not able to see the copy control settings between quotation and Value/Quantity ,Also it help me a lot if you can provide me the copy control settings -Header and Item level
Thanks and Regards
Mohammed Roshan

if you run VTAA you would try to create a copy control as follows:
source: QT (quotation)
target: CQ (quantity contract)
say, take the existing record QT->AA (just an example) highlight it and hit 'Copy As'. Type 'CQ' in Target SalesDocTyp field.
hit Enter. Hit 'copy all'. (if you get a message regarding the "-" or "+" quantityt set this field blank (empty)
save it and test.
good luck!

Basic Difference: Copy Control Settings

Dear All,
I have got confused over Copy Control Settings b/w
VTFA & VTFL.
Please help me to understand the both (with differences).
Best Regards,
Amit.

Hi
VTFA is order to billing copy controls
that is in order's item category the billing relevence will be order related billing like cash sales , return order etc
Means your sales order is referrered for billing
VTFL is Delivety to billing copy controls
that is in your order's item category the billing relevence will be delivery related billing like standard order, rush sales etc
Means your delivery document is referred for billing
Hooe it calrifies
Regards
Raja
Edited by: ramanathan raja on Sep 15, 2008 4:33 PM

STO Process Copy control settings

Dear Gurus,
I am having issues with item number in purchase order and delivery document. I require the same item numbers in purchase order to be copied to delivery document. I think i got to do something with copy control settings. Please help me. I am confused since its an STO process.
Thanks in advance

Hi George,
Here customization can be done as follows:
Step 1: SPRO --> MM --> Purchasing --> PO --> Set up STO
In this step the customer number and sales area is assigned to Supplying & Delivering plants.
Step 2: SPRO --> Logistics Execution --> Shipping --> Delivery --> Copy control --> Specify Copy control for Deliveries
Check the settings made for DL to NL (STO) and DL to NLCC (Cross company) copy control settings.
Step 3: T.Code OVLK
The Delivery document types NL and NLCC needs to be assigned with "B" in the order required field. Thus, the system understands the data for delivery document has to be copied from Purchase order.
Thanks & Regards,
Sharan

Copy control settings needed for order related billing

hi,
sap gurus,
please provide the copy control settings related order related billilng and order related proforma invoice.
thanks in advance
regards,
balaji.t

Dear,
1 )Use TCODE -- VTFA and maintain between OR ( source doc)TO F2 (Target Doc.) for ORDER RELATED BILLING
If u want Z Document type then copy OR and make ur OWN SALES DOC like ZMFG and also copy F2 and create like ZFGR
and maintain as suggested above.
At Header Level -- COPYING REQUIREMENT (001)
At ITEM Level-- COPYING REQUIREMENT (001)
                          DATA VBRK/VBRP (003) SINGLE INVOICE OR (001) SPLIT INVOICE
                         Billing quantity (A) / Pos./neg. quantity (+)/ Pricing type (C)
2) Use TCODE -- VTFA and maintain between OR ( source doc)TO F5(Target Doc.) for ORDER RELATED PROFARMA BILLING in similar way u can maintain for ur Z Documents
At Header Level -- COPYING REQUIREMENT (007)
At ITEM Level-- COPYING REQUIREMENT (008)
                          DATA VBRK/VBRP (003) SINGLE INVOICE OR (001) SPLIT INVOICE
                         Billing quantity (A) / Pos./neg. quantity (+)/ Pricing type (C)
need further help revert back.
Regards
AJIT K SINGH
HAPPY TO HELP U

Easy Setups and settings not visible

I've created a few different easy setups and other settings for various situations as I've been working but for some reason none of the settings I've saved are accessible after I close the program. I've tried clicking the "show all" checkbox on the Easy Setups box but the only thing that happens then is that I'm unable to expand the list of Easy Setups or hit cancel (meaning all I can do is either uncheck the box or hit OK).
I have no clue why this is doing this and would appreciate any help. I'm using Final Cut 5.1.4 on a Dual-core Mac Pro...

Hi friend,
Please try to check you documents in transaction code VTFL by giving the Billing document (first) and the delivery document.
Definitely you can find the combination
And for your another question , In the table TVCPF you can see the sales document type ED which would have maintained in the VTAF copy controls from the Sales document to Billing documents
Please let me know if you have further queries.
santosh

Credit control field not visible in customer master after checking Spro

Hello Gurus,
I have configured Automatic Credit Control In IMG.
I have checked all the necessary spets required for the avtivation of Automatic Credit Control.
But I am facing in problem and will appreciate all your help for this problem.
In Customer master> Sales area data> Billing Document--> delivery and payment terms. Within delivery and payment terms the feild for credit control area is not visible.
I have checked in spro>financial accounting> Ac rec & Ac payable>customer account>master data>preparation for creating customer master> define account groups with screen laypouts (customers).
Within Define account groups with screen laypouts (customers)>account group 001(soldtoparty)details>field status>sales data>billing-->Hedging and credit contr. area I have tried it with optional as well as reuired entry and still the credit control field is not visible in customer master.
Pls provide me the steps as well as solutions for the problem.
Thanks & regards,
Dev.

pls check accunt group again
rgds
nitin

[Solved]Web Service Data Control operation not visible in Data Controls

Hi!
I've created Web Service Data Control (named MyDataControl ) in my DataModel project for my web application (ADF BC 10.1.3.3). I've finished the wizard successfully (added initiate operation to the right side in step 2: Data Control Operations) but when the wizard finishes the initiate operation is not visible in the Data Controls (MyDataControl is visible without the operation). I'm using CVS so I think maybe some files were write protected while creating the control.
These are the files where Data Control is written to:
DataControls.dcx:
<AdapterDataControl id="MyDataControl" FactoryClass="oracle.adf.model.adapter.DataControlFactoryImpl"
                      ImplDef="oracle.adfinternal.model.adapter.webservice.WSDefinition" SupportsTransactions="false"
                      SupportsSortCollection="false" SupportsResetState="false" SupportsRangesize="false"
                      SupportsFindMode="false" SupportsUpdates="false" Definition="MyDataControl"
                      BeanClass="MyDataControl" xmlns="http://xmlns.oracle.com/adfm/datacontrol">
    <Source>
      <definition xmlns="http://xmlns.oracle.com/adfm/adapter/webservice" name="MyDataControl" version="1.0"
                  provider="oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider"
                  wsdl="my_wsdl_location">
        <service name="MyService" namespace="urn:eu.emsa.ssn" connection="MyDataControl">
          <port name="MyServicePort">
            <operation name="initiateMyService">
              <dataformat format="XML"/>
            </operation>
          </port>
        </service>
      </definition>
    </Source>
</AdapterDataControl>and MyDataControl.xml:
<?xml version="1.0" encoding="UTF-8" ?>
<JavaBean xmlns="http://xmlns.oracle.com/adfm/beanmodel" version="10.1.3.41.57" id="MyDataControl"
          BeanClass="MyDataControl" isJavaBased="false">
<MethodAccessor id="initiateMyService">
    <ParameterInfo id="ReplyTo_Address" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="ReplyTo_PortType" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="ReplyTo_ServiceName_PortName" Type="java.lang.Object" isStructured="false"/>
    <ParameterInfo id="ReplyTo_ServiceName" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="MessageID" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="payload" Type="java.lang.String" isStructured="false"/>
</MethodAccessor>
</JavaBean>A couple of days ago I've created a Data Control for another BPEL process the same way and everything was OK.
Any ideas why this is not working?
Regards!
BB
Message was edited by:
Brokenbone

Found out the reason. The problem was in ...MyApp\.adf\META-INF\connections.xml file which had write protection.
BB

[Solved]WS Data Control operation not visible in Data Controls in JDev

Hi!
I've created Web Service Data Control (named MyDataControl ) in my DataModel project for my web application (ADF BC 10.1.3.3). I've finished the wizard successfully (added initiate operation to the right side in step 2: Data Control Operations) but when the wizard finishes the initiate operation is not visible in the Data Controls (MyDataControl is visible without the operation). I tried on JDev forum but had no success.
DataControls.dcx:
<AdapterDataControl id="MyDataControl" FactoryClass="oracle.adf.model.adapter.DataControlFactoryImpl"
                      ImplDef="oracle.adfinternal.model.adapter.webservice.WSDefinition" SupportsTransactions="false"
                      SupportsSortCollection="false" SupportsResetState="false" SupportsRangesize="false"
                      SupportsFindMode="false" SupportsUpdates="false" Definition="MyDataControl"
                      BeanClass="MyDataControl" xmlns="http://xmlns.oracle.com/adfm/datacontrol">
    <Source>
      <definition xmlns="http://xmlns.oracle.com/adfm/adapter/webservice" name="MyDataControl" version="1.0"
                  provider="oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider"
                  wsdl="my_wsdl_location">
        <service name="MyService" namespace="urn:eu.emsa.ssn" connection="MyDataControl">
          <port name="MyServicePort">
            <operation name="initiateMyService">
              <dataformat format="XML"/>
            </operation>
          </port>
        </service>
      </definition>
    </Source>
</AdapterDataControl>and MyDataControl.xml:
<?xml version="1.0" encoding="UTF-8" ?>
<JavaBean xmlns="http://xmlns.oracle.com/adfm/beanmodel" version="10.1.3.41.57" id="MyDataControl"
          BeanClass="MyDataControl" isJavaBased="false">
<MethodAccessor id="initiateMyService">
    <ParameterInfo id="ReplyTo_Address" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="ReplyTo_PortType" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="ReplyTo_ServiceName_PortName" Type="java.lang.Object" isStructured="false"/>
    <ParameterInfo id="ReplyTo_ServiceName" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="MessageID" Type="java.lang.String" isStructured="false"/>
    <ParameterInfo id="payload" Type="java.lang.String" isStructured="false"/>
</MethodAccessor>
</JavaBean>A couple of days ago I've created a Data Control for another BPEL process the same way and everything was OK.
Any ideas why this is not working?
Regards!
BB
Message was edited by:
Brokenbone

Found out the reason. The problem was in ...MyApp\.adf\META-INF\connections.xml file which had write protection.
BB

Audio Interface (Presonus) on Intel iMac - Control software not visible

I'm trying to use core audio compatible Presonus Inspire 1394 firewire audio interface on my new Intel iMac. My main problem is the only controls for the interface are onscreen, but software for said control panel doesn't visibly open. The icon for the device oscillates side-to-side in my dock, and trying to move the inspire file from the desktop reveals that "the app is open." However, I can not see the control panel or any other evidence the file is open. With the help of Presonus tech, I've discovered a couple of things:
1. The device syncs with my iMac, as evidenced by its presence in the Audio Midi Setup panel, plus
2. Play back of a song in iTunes goes through the interface's headphone jack just fine.
My install procedure has revealed two things, also:
When I put the software disk in, open the Inspire control panel file, then the control panel is visible. However, when I then plug in the firewire device, I get an eternally revolving beachball and eventually have to force quit (new to mac, but I figure that is my only option at that point.)
However, if I plug in the firewire first, then try to open the control panel file, I get the open-but-not-visibly-so problem I first mentioned (appears in dock, etc.).
Does anyone have any suggestions? Has anyone experienced a newly loaded app appearing in the dock but not visibly open?
I've tried restarting mac, reinstalling sw and device, downloading said software from the Personus web site (vs the disc supplied version), and both repairing and verifying HD permissions. I am at a loss. Presonus said the device is plug-and-play with core audio. a check reveals the device is PowerPC, but they said it should run on intel mac too, based on their assurances from apple personnel and other stuff I didn't understand (it is an OS X issue, not platform...or something).
Thanks for any suggestions.
Intel iMac 17 in Mac OS X (10.4.4) 1 GB RAM

I got the following message yesterday from Presonus:
Hello,
The new Intel Mac's have a proprietary OSX that does not fully support our
products yet.
They will, but I have no ETA.
Check our website from time to time for future posts and available
downloads.
Butch Richard
Interface Technical Support

Copy control settings in billing plan order ( Milestone billing)

Hi ALL,
in my scenario i have a billing plan order in which there is a material of total value 500 rs and then divided into three billing plans. like first date it will be say 100rs, 2nd date 300rs and then on the 3rd date 200rs, then the sales order is saved. when i created a proforma invoice from the sales order i am getting 3 line item there in the proforma invoice like as follows
material
XYZ------ 100rs
XYZ------ 300rs
XYZ------ 200rs
so the material is divide into 3 line items according to the billing plan which is maintained in the sales order.
can it be possible to bring only onle line item in the proforma invoice with the total amount like
Material
XYZ--- 500rs
are there any settings in copy control between sales order and billing which i missed?
Looking forward.
regards,
Subhrangshu

Dear Subhrangshu,
If you want the entire amount to be reflected in the invoice, why are you using a billing plan?
Can you share with us the scenario in detail?
Thanks & Regards,
Hegal K Charles

Copy Control settings : Copy Only Manual conditions

Hi,
I have following configuration in SPRO for 'copying control of item categories':
Source item category- ZSPP
Target item category - ZPQL
Copying routine - 900004
Copy Conditions - Only Copy Manual conditions
This copy control configuration will be used in 2 scenarios :
1. When creating service contract quote as follow-up to service contract
2. When creating service contract as follow-up to some other document type which is custom
My copying routine is required only for first scenario. So, I have put one conditions in my copy routine(CRM_COPY_BADi) and it is working fine. This copying routine is getting triggerd only for first scenario.
However, my another requirement is,
Copy conditions - should be "Copy Manual conditions" for scenario 1 and
Copy Conditions - should be "Copy All Conditions" for scenario 2.
So, could you please let me know, how can control this, sinca same item categories are used in both the scenarios. I can't create or change the item categories since already they are in use.
The baseliine is : I am able to control the copying routine by keeping a condition in CRM_COPY_BADI. But, at the same time I should control "COPY CONDITIONS" also.
Is there any way to control through config or coding?
Please help me.
Thanks,
Sandeep
Edited by: Sandeep Reddy on Aug 17, 2010 1:37 PM

Dear,
1 )Use TCODE -- VTFA and maintain between OR ( source doc)TO F2 (Target Doc.) for ORDER RELATED BILLING
If u want Z Document type then copy OR and make ur OWN SALES DOC like ZMFG and also copy F2 and create like ZFGR
and maintain as suggested above.
At Header Level -- COPYING REQUIREMENT (001)
At ITEM Level-- COPYING REQUIREMENT (001)
                          DATA VBRK/VBRP (003) SINGLE INVOICE OR (001) SPLIT INVOICE
                         Billing quantity (A) / Pos./neg. quantity (+)/ Pricing type (C)
2) Use TCODE -- VTFA and maintain between OR ( source doc)TO F5(Target Doc.) for ORDER RELATED PROFARMA BILLING in similar way u can maintain for ur Z Documents
At Header Level -- COPYING REQUIREMENT (007)
At ITEM Level-- COPYING REQUIREMENT (008)
                          DATA VBRK/VBRP (003) SINGLE INVOICE OR (001) SPLIT INVOICE
                         Billing quantity (A) / Pos./neg. quantity (+)/ Pricing type (C)
need further help revert back.
Regards
AJIT K SINGH
HAPPY TO HELP U

Some flash content (like flash player settings) not visible

Hello,
I am running the newest versions of Flash Player in both FireFox 3.6 and IE8 on Windows XP Pro.
I can see most Flash things (like this page: http://www.adobe.com/software/flash/about/ which in both browsers says "You have version 10,0,45,2 installed"). Several things do not appear. For instance, none of the Settings Panel windows show up. Also, some Facebook apps do not work (i.e. Pet Society) while others by the same vendor (i.e. Crazy Planets) work fine.
Both browsers behave the same. I cannot see the settings windows in either one.
I have run the uninstaller, and re-installed Flash several times.
I'll be grateful for whatever help can be provided.
J

I actually tried an older version of 10, but yes, I went back to the current version.
The only Java is Java 6 update 18, I ran the Java update and it confirms that I'm current. Adobe DLM and GetPlus are already gone.
Here's the plugins from IE8 ("All Add-ons" not just the currently used ones):
Name                   SysProWmi Class
Publisher              (Not verified) Dell Computer Corp.
Status                 Enabled
File date              Thursday, January 23, 2003, 2:23 PM
Version                2. 0. 0. 1
Name                   Shockwave Flash Object
Publisher              Adobe Systems Incorporated
Status                 Enabled
File date              Tuesday, January 26, 2010, 6:58 PM
Version                10.0.45.2
Name                   Adobe PDF Reader Link Helper
Publisher              Adobe Systems, Incorporated
Status                 Enabled
File date              Friday, December 18, 2009, 2:16 AM
Version                8.2.0.81
Load time              0.03 s
Name                   RealPlayer G2 Control
Publisher              Control name is not available
Status                 Enabled
Name                   Web Anti-Virus statistics
Publisher              Kaspersky Lab
Status                 Enabled
File date              Monday, November 19, 2007, 2:42 PM
Version                6.0.3.837
Name                   Research
Publisher              Microsoft Corporation
Status                 Enabled
File date              Thursday, April 19, 2007, 1:10 PM
Version                11.0.8164.0
Name                   MUWebControl Class
Publisher              Microsoft Corporation
Status                 Enabled
File date              Thursday, August 06, 2009, 6:23 PM
Version                5.8.0.2469
Name                   InformationCardSigninHelper Class
Publisher              Microsoft Corporation
Status                 Enabled
File date              Sunday, March 08, 2009, 3:31 AM
Version                8.00.6001.18702
Name                   Windows Media Player
Publisher              Microsoft Corporation
Status                 Enabled
File date              Monday, July 13, 2009, 10:43 PM
Version                11.0.5721.5268
Name                   XML DOM Document
Publisher              Microsoft Corporation
Status                 Enabled
File date              Thursday, July 30, 2009, 10:35 PM
Version                8.100.1051.0
Name                   DHTML Edit Control Safe for Scripting for IE5
Publisher              Microsoft Corporation
Status                 Enabled
File date              Monday, July 27, 2009, 4:27 PM
Version                6.01.9247
Name                   Tabular Data Control
Publisher              Microsoft Corporation
Status                 Enabled
File date              Sunday, March 08, 2009, 3:30 AM
Version                8.00.6001.18702
Name                   Microsoft Office Control
Publisher              Microsoft Corporation
Status                 Enabled
File date              Thursday, April 19, 2007, 1:10 PM
Version                11.0.8164
Name                   XML Document
Publisher              Microsoft Corporation
Status                 Enabled
File date              Thursday, July 30, 2009, 10:35 PM
Version                8.100.1051.0
Name                   Windows Media Player
Publisher              Microsoft Corporation
Status                 Enabled
File date              Monday, July 13, 2009, 10:43 PM
Version                11.0.5721.5268
Name                   XML DOM Document 6.0
Publisher              Microsoft Corporation
Status                 Enabled
File date              Friday, July 31, 2009, 10:05 AM
Version                6.20.1103.0
Name                   Free Threaded XML DOM Document 6.0
Publisher              Microsoft Corporation
Status                 Enabled
File date              Friday, July 31, 2009, 10:05 AM
Version                6.20.1103.0
Name                   XSL Template 6.0
Publisher              Microsoft Corporation
Status                 Enabled
File date              Friday, July 31, 2009, 10:05 AM
Version                6.20.1103.0
Name                   XML HTTP 6.0
Publisher              Microsoft Corporation
Status                 Enabled
File date              Friday, July 31, 2009, 10:05 AM
Version                6.20.1103.0
Name                   RMGetLicense Class
Publisher              Microsoft Corporation
Status                 Enabled
File date              Wednesday, October 18, 2006, 8:47 PM
Version                11.0.5721.5145
Name                   SearchAssistantOC
Publisher              Microsoft Corporation
Status                 Enabled
File date              Monday, April 14, 2008, 5:42 AM
Version                6.00.2900.5512
Name                   VIDEO__X_MS_ASF Moniker Class
Publisher              Microsoft Corporation
Status                 Enabled
File date              Monday, July 13, 2009, 10:43 PM
Version                11.0.5721.5268
Name                   VIDEO__X_MS_WMV Moniker Class
Publisher              Microsoft Corporation
Status                 Enabled
File date              Monday, July 13, 2009, 10:43 PM
Version                11.0.5721.5268
Name                   Discuss
Publisher              Not Available
Status                 Enabled
Version                6.0.2900.5512
Name                   Windows Messenger
Publisher              Not Available
Status                 Enabled
Name                   Diagnose Connection Problems...
Publisher              Not Available
Status                 Enabled
Name                   {CD67F990-D8E9-11D2-98FE-00C0F0318AFE}
Publisher              Not Available
Status                 Enabled
Name                   Research
Publisher              Not Available
Status                 Enabled
Name                   Web Anti-Virus statistics
Publisher              Not Available
Status                 Enabled
Name                   Java(tm) Plug-In 2 SSV Helper
Publisher              Sun Microsystems, Inc.
Status                 Enabled
File date              Monday, January 11, 2010, 8:42 PM
Version                6.0.180.7
Load time              0.53 s
Name                   Java Plug-in 1.6.0_18
Publisher              Sun Microsystems, Inc.
Status                 Enabled
File date              Thursday, December 17, 2009, 5:14 PM
Version                1.6.0.18
Name                   Java Plug-in 1.6.0_18
Publisher              Sun Microsystems, Inc.
Status                 Enabled
File date              Thursday, December 17, 2009, 5:14 PM
Version                1.6.0.18
Could we concentrate on getting it running in IE? I never use IE and am willing to do any necessary experiements on it. It's more difficult to type up all my Firefox extensions and plugins (no easy copy & paste), and I would rather leave my otherwise fully functional Firefox installation alone. If not, maybe there's a plugin that dumps info about all the plugins into a text file.
Wags

The shuttle controls are not visible in Aperture 3

the shuttle control units are not anymore shown in Aperture only the scolling arrows. Is it possible to deactivate them? Any idea how to reactivate?
Thanks

They were removed at some point after 3.0.
You can still use the keyboard shortcuts ("j", "k", "l").

VTFL copy control settings not visible

Similar Messages

Maybe you are looking for