W540 - Failure due to missing i/o HD light

Word of warning about TuneUp utilities AVG Zen.
Yesterday I got the offer to upgrade my license to the new PC-Tune from AVG. Failed on the W540 with error @AVGMSI_Error1729 [0xC00706C1].
Advised to run repair file AVG_BFEfix.exe
Program says "WORK IN PROGRESS - Please be patient..." OK, it's been running for 25+ minutes. Program only has a flashing square box, no metering, or other status information.
On my other systems, AVG Zen works, but it's sole purpose seems to be to sell you other programs and license administration. Many of these programs are vertical in nature, and claim YOUR machine as THEIRS.
So... the question is: Is the W540 working? Cleaning something? Is the computer locked? All this cloud business is a failure for people who work. Adobe ruined my install of PS CC and most Cloud tech support want to log into your machine remotely.
Think carefully. Why did Lenovo follow MS's directive and removed the HD light or WiFi light??

Using 'DriveGleam v1.12'. Seems to work OK when there is a screen to look at (e.g. fully booted), but on boot and shut down, or MS updates, I still have no idea what gives. I have yet to get the right colors in DriveGleam.
I did get a Rikiki drive as my external backup and a USB 3.0 Lexar NOT SANDISK USB key!, as my external boot drive for True Image. The restores are great, no issues after 20+ restores. Maybe a USB 3.0 256gig is in the offing. No Rikiki then. The restores are relatively quick. Would be quiker with an external SSD/USB3 or to the 2nd SSD in the caddy.
Ummm let me think, added items to use as a workstation:
1) Mouse or Wacom
2) USB SD card reader
3) Rikiki
4) DVD drive (I have a fixed SSD in the DVD slot, no easy field swap)
5) USB 3 port extender AND PSU for powered ports.
6) Inline switch on power brick with neon light
7) Cables for all the workarounds.
Thank goodness the battery sticks out in the back, this partially protects the power cord from bending. Albeit, my plug is already slightly bent from accidentally lifting from the front. I'm a klutz.

Similar Messages

Bootcamp Win 7 - system restore failure due to missing drivers

brand new MacBookAir6,2 Intel Core i7 MacOS 10.9
Installation of Win 7 prof. 64bit via bootcamp (no problems)
I ran a back-up of the system over my network and then tried a restore. This fails due to the fact that upon invoking the restore option with win 7 and reboot/choice of OS, I get a window asking for the language to be chosen which I cannot manipulate. Apparently, at this point no single driver is installed: neither the aplle keyboard driver nor a usb driver (tried an external usb keyboard - no success).
This means that at this point bootcamp win7 backups are useless since they can't be addressed if the need arises.
Suggestions welcome.
Siggi

Are you using NTFS driver in Mac OS X to WRITE to your MyBook?
If so, switch to Paragon Software's. Demo is fine.
MyBooks are often trouble, though usually under OS X.
In Windows, do chkdsk on it.

ICal event invitation failures due to missing/malformed email addresses

These problems, although slightly different, appear in both 10.5.8 and 10.6.1. I don't see in the release notes that this was addressed in 10.6.2, but I have not installed it yet.
In 10.5.8, sometimes when a user is invited through the iCal invitation, an email is (attempted) to send with no email address in the to field; it's completely blank, and the mail server rejects it with a bounce message. Below is an example of the bounce message:
+This is an informative message sent by mail.xxx.com.+
+The server was not able to deliver your email message+
+Subject: xxx+
+Date: Tue, 27 Oct 2009 22:38:54 -0400+
+to the following addresses:+
+*<invalid:nomail> (mail.xxx.com: Mailbox does not exist)*+
10.6.1, instead of the full email address being included in the invitation, some additional information gets put in the email address section (see the bold section):
+From: Mail Delivery Subsystem <[email protected]>+
+Date: November 11, 2009 3:35:51 PM EST+
+To: <[email protected]>+
+Subject: Returned email: tes+
+This is an informative message sent by mail.xxx.com.+
+The server was not able to deliver your email message+
+Subject: tes+
+Date: Wed, 11 Nov 2009 15:35:50 -0500+
+to the following addresses:+
+</caldav/users/[email protected]/> (xxx.com: 553 Invalid recipient (Cannot validate domain): /caldav/users/[email protected]/, )Reporting-MTA: dns; mail.xxx.com+
+Arrival-Date: Wed, 11 Nov 2009 15:35:50 -0500+
+Original-Recipient: /caldav/users/[email protected]/+
+Final-Recipient: rfc822;/caldav/users/[email protected]/+
+Action: failed+
+Status: 5.1.1+
+Remote-MTA: xxx.com+
+Diagnostic-Code: SMTP; 553 Invalid recipient (Cannot validate domain): /caldav/users/[email protected]/,+
+Received: from [x.x.x.x] ([x.x.x.x])+
+ by mail.xxx.com (Kerio MailServer 6.7.2)+
+ for /caldav/users/[email protected]/;+
+ Wed, 11 Nov 2009 15:35:50 -0500+
+Message-ID: <[email protected]>+
+From: [email protected]+
+To: /caldav/users/[email protected]/+
+Subject: tes+
+Date: Wed, 11 Nov 2009 15:35:50 -0500+
+MIME-Version: 1.0+
+Content-Type: multipart/alternative;+
+ boundary="MIME--453666918-1637820692-delim"+
Note how it's including /caldav/users/ in with the email address.
Message was edited by: Will O'Neal

OK, I've discovered the 10.6 issue is a bug in Kerio Mail Server 6.7.2 and is scheduled to be fixed with the release of 6.7.3.
The 10.5 issue remains open.

ORA-19612: datafile 0 not restored due to missing data

Hello,
I'm testing a restore of the controlfile. The database is in archivelog mode and autobackup is set to ON. I successfully did a full backup and backup as copy database.
To test I did the following:
- note the DBID
- shutdown the database
- renamed both controlfiles:
$ mv /u02/rcat/control01.ctl /u02/rcat/control01.ctl_old
$ mv /u02/fra/rcat/control02.ctl /u02/fra/rcat/control02.ctl_old
When I try to restore the controlfile form autobackup I receive the following error. What could be reason please?
[rcat@oel54]$ rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 10 00:07:41 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: RCAT (not mounted)
RMAN> set dbid 502889862;
executing command: SET DBID
RMAN> restore controlfile from autobackup;
Starting restore at 10-DEC-10
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=19 device type=DISK
recovery area destination: /u02/fra
database name (or database unique name) used for search: RCAT
channel ORA_DISK_1: AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp found in the recovery area
channel ORA_DISK_1: looking for AUTOBACKUP on day: 20101210
channel ORA_DISK_1: looking for AUTOBACKUP on day: 20101209
channel ORA_DISK_1: restoring control file from AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/10/2010 00:09:55
ORA-19870: error while restoring backup piece /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
ORA-19612: datafile 0 not restored due to missing data
$ ll /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
-rw-r----- 1 oracle dba 10354688 Dec 9 23:44 /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkpThanks!

The file was indeed corrupted as below will show.
Very strange. Perhaps something with the latest Virtualbox or the SSD/hybrid harddrive. (host MacOSX 10.6, guest Oracle Linux 5.5 UEK)
$ mv /u02/rcat/control01.ctl_old /u02/rcat/control01.ctl
$ mv /u02/fra/rcat/control02.ctl_old /u02/fra/rcat/control02.ctl
SQL> startup mount
ORACLE instance started.
SQL> recover database;
ORA-00283: recovery session canceled due to errors
ORA-00264: no recovery required
SQL> alter database open;
Database altered.
$ rman target /
connected to target database: RCAT (DBID=502889862)
RMAN> backup current controlfile;
piece handle=/u02/fra/RCAT/backupset/2010_12_10/o1_mf_ncnnf_TAG20101210T012420_6j2wsoko_.bkp
Finished backup at 10-DEC-10
Starting Control File and SPFILE Autobackup at 10-DEC-10
piece handle=/u02/fra/RCAT/autobackup/2010_12_10/o1_mf_s_737342662_6j2wspvf_.bkp comment=NONE
Finished Control File and SPFILE Autobackup at 10-DEC-10
RMAN> restore validate controlfile;
piece handle=/u02/fra/RCAT/autobackup/2010_12_10/o1_mf_s_737342662_6j2wspvf_.bkp tag=TAG20101210T012422
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: validation complete, elapsed time: 00:00:02
Finished restore at 10-DEC-10
SQL> shutdown immediate
$ mv /u02/rcat/control01.ctl /u02/rcat/control01.ctl_old
$ mv /u02/fra/rcat/control02.ctl /u02/fra/rcat/control02.ctl_old
SQL> startup nomount
$ rman target /
connected to target database: RCAT (not mounted)
RMAN> set dbid 502889862;
RMAN> restore controlfile from autobackup;
Starting restore at 10-DEC-10
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=19 device type=DISK
recovery area destination: /u02/fra
database name (or database unique name) used for search: RCAT
channel ORA_DISK_1: AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_10/o1_mf_s_737342662_6j2wspvf_.bkp found in the recovery area
channel ORA_DISK_1: looking for AUTOBACKUP on day: 20101210
channel ORA_DISK_1: restoring control file from AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_10/o1_mf_s_737342662_6j2wspvf_.bkp
channel ORA_DISK_1: control file restore from AUTOBACKUP complete
output file name=/u02/rcat/control01.ctl
output file name=/u02/fra/rcat/control02.ctl
Finished restore at 10-DEC-10

Datafile not restored due to missing or corrupt data

Hi all,
I was asked to restore a RMAN backup which we got from another region, the rman backup contains controlfiles and datafiles as compressed backupset.
oracle version is 10.2.0.3.0
aix version 6
First, I have restored the control file using the below command:
run
+{+
allocate channel t1 type disk;
restore controlfile from '/oracle/app/prod/rman/cf_t799873684_s17_p1';
alter database mount;
+}+
Second, I have cataloged the backup piece:
catalog backuppiece '/oracle/app/prod/rman/df_t794754324_s12_p1';
catalog backuppiece '/oracle/app/prod/rman/df_t793567544_s13_p1';
catalog backuppiece '/oracle/app/prod/rman/df_t731097654_s14_p1';
catalog backuppiece '/oracle/app/prod/rman/df_t792538698_s15_p1';
catalog backuppiece '/oracle/app/prod/rman/df_t792183472_s16_p1';
catalog backuppiece '/oracle/app/prod/rman/cf_t799873684_s17_p1';
Third, used below command to restore:
+run {+
allocate channel t1 type disk;
allocate channel t2 type disk;
allocate channel t3 type disk;
allocate channel t4 type disk;
set newname for datafile 01 to '/oracle/app/oradata/dbprod/system01.dbf';
set newname for datafile 02 to '/oracle/app/oradata/dbprod/undotbs01.dbf';
set newname for datafile 03 to '/oracle/app/oradata/dbprod/sysaux01.dbf';
set newname for datafile 04 to '/oracle/app/oradata/dbprod/users01.dbf';
set newname for datafile 06 to '/oracle/app/oradata/dbprod/datafile005.dbf';
set newname for datafile 07 to '/oracle/app/oradata/dbprod/datafile006.dbf';
set newname for datafile 08 to '/oracle/app/oradata/dbprod/datafile007.dbf';
set newname for datafile 09 to '/oracle/app/oradata/dbprod/datafile008.dbf';
set newname for datafile 10 to '/oracle/app/oradata/dbprod/datafile009.dbf';
set newname for datafile 11 to '/oracle/app/oradata/dbprod/datafile010.dbf';
set newname for datafile 14 to '/oracle/app/oradata/dbprod/datafile001.dbf';
set newname for datafile 15 to '/oracle/app/oradata/dbprod/datafile002.dbf';
set newname for datafile 16 to '/oracle/app/oradata/dbprod/datafile003.dbf';
set newname for datafile 17 to '/oracle/app/oradata/dbprod/datafile004.dbf';
set newname for datafile 18 to '/oracle/app/oradata/dbprod/indfile001.dbf';
set newname for datafile 19 to '/oracle/app/oradata/dbprod/indfile002.dbf';
set newname for datafile 20 to '/oracle/app/oradata/dbprod/indfile011.dbf';
restore database;
switch datafile all;
recover database;
+}+
But while restoring, I got error like below:
Starting restore at 22-OCT-12
channel t1: starting datafile backupset restore
channel t1: specifying datafile(s) to restore from backup set
restoring datafile 00004 to /glotam3/oracle10g/oradata/T24DEV3/users01.dbf
restoring datafile 00007 to /glotam3/oracle10g/oradata/T24DEV3/datafile006.dbf
restoring datafile 00011 to /glotam3/oracle10g/oradata/T24DEV3/datafile010.dbf
restoring datafile 00012 to /glotam3/oracle10g/oradata/T24DEV3/recop01.dbf
restoring datafile 00014 to /glotam3/oracle10g/oradata/T24DEV3/datafile001.dbf
channel t1: reading from backup piece /oracle/app/prod/rman/df_t793567544_s13_p1
channel t2: starting datafile backupset restore
channel t2: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /oracle/app/oradata/dbprod/system01.dbf
restoring datafile 00003 to /oracle/app/oradata/dbprod/sysaux01.dbf
restoring datafile 00008 to /oracle/app/oradata/dbprod/datafile007.dbf
restoring datafile 00015 to /oracle/app/oradata/dbprod/datafile002.dbf
restoring datafile 00018 to /oracle/app/oradata/dbprod/indfile001.dbf
channel t2: reading from backup piece /oracle/app/prod/rman/df_t792538698_s15_p1
channel t3: starting datafile backupset restore
channel t3: specifying datafile(s) to restore from backup set
restoring datafile 00002 to /oracle/app/oradata/dbprod/undotbs01.dbf
restoring datafile 00009 to /oracle/app/oradata/dbprod/datafile008.dbf
restoring datafile 00013 to /oracle/app/oradata/dbprod/prefstat01.dbf
restoring datafile 00016 to /oracle/app/oradata/dbprod/datafile003.dbf
restoring datafile 00019 to /oracle/app/oradata/dbprod/indfile002.dbf
channel t3: reading from backup piece /oracle/app/prod/rman/df_t731097654_s14_p1
channel t4: starting datafile backupset restore
channel t4: specifying datafile(s) to restore from backup set
restoring datafile 00006 to /oracle/app/oradata/dbprod/datafile005.dbf
restoring datafile 00010 to /oracle/app/oradata/dbprod/datafile009.dbf
restoring datafile 00017 to /oracle/app/oradata/dbprod/datafile004.dbf
restoring datafile 00020 to /oracle/app/oradata/dbprod/indfile011.dbf
channel t4: reading from backup piece /oracle/app/prod/rman/df_t794754324_s12_p1
ORA-19870: error reading backup piece /oracle/app/prod/rman/
df_t793567544_s13_p1
ORA-19612: datafile 11 not restored due to missing or corrupt data
channel t3: restored backup piece 1
failover to piece handle=/oracle/app/prod/rman/
df_t731097654_s14_p1 tag=TAG20120822T184703
channel t3: restore complete, elapsed time: 01:06:05
channel t2: restored backup piece 1
failover to piece handle=/oracle/app/prod/rman/
df_t792538698_s15_p1 tag=TAG20120822T184703
channel t2: restore complete, elapsed time: 01:09:10
ORA-19870: error reading backup piece /oracle/app/prod/rman/
df_t794754324_s12_p1
ORA-19612: datafile 20 not restored due to missing or corrupt data
failover to previous backup
released channel: t1
released channel: t2
released channel: t3
released channel: t4
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 10/22/2012 15:11:23
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 20 found to restore
RMAN-06023: no backup or copy of datafile 17 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN>
This same rman backup has been restored in other server, the commands were same but the db was not restored in my server.
Kindly help me....
Thanks in advance,
nonuday

Hi mseberg,
When I executed the below command with same date. This is what is got and am not able to understand what it says.
RMAN> run
+{+
SET UNTIL TIME "TO_DATE('10/22/2012','MM/DD/YYYY')";
restore database preview;
+}2> 3> 4> 5>+
executing command: SET until clause
Starting restore at 23-OCT-12
using channel ORA_DISK_1
List of Backup Sets
+===================+
BS Key Type LV Size       Device Type Elapsed Time Completion Time
+8 Full 11.68G DISK 02:10:15 22-AUG-12+
BP Key: 18   Status: AVAILABLE Compressed: YES Tag: TAG20120822T184703
Piece Name: /oracle/app/prod/rman/df_t793567544_s13_p1
List of Datafiles in backup set 8
File LV Type Ckp SCN    Ckp Time Name
+4 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/users01.dbf+
+7 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile006.dbf+
+11 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile010.dbf+
+12 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/recop01.dbf+
+14 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile001.dbf+
BS Key Type LV Size       Device Type Elapsed Time Completion Time
+10 Full 11.35G DISK 02:15:49 22-AUG-12+
BP Key: 16   Status: AVAILABLE Compressed: YES Tag: TAG20120822T184703
Piece Name: /oracle/app/prod/rman/df_t792538698_s15_p1
List of Datafiles in backup set 10
File LV Type Ckp SCN    Ckp Time Name
+1 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/system01.dbf+
+3 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/sysaux01.dbf+
+8 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile007.dbf+
+15 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile002.dbf+
+18 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/indfile001.dbf+
BS Key Type LV Size       Device Type Elapsed Time Completion Time
+11 Full 10.78G DISK 02:20:07 22-AUG-12+
BP Key: 15   Status: AVAILABLE Compressed: YES Tag: TAG20120822T184703
Piece Name: /oracle/app/prod/rman/df_t731097654_s14_p1
List of Datafiles in backup set 11
File LV Type Ckp SCN    Ckp Time Name
+2 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/undotbs01.dbf+
+9 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile008.dbf+
+13 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/prefstat01.dbf+
+16 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile003.dbf+
+19 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/indfile002.dbf+
BS Key Type LV Size       Device Type Elapsed Time Completion Time
+12 Full 16.83G DISK 03:25:43 22-AUG-12+
BP Key: 14   Status: AVAILABLE Compressed: YES Tag: TAG20120822T184703
Piece Name: /oracle/app/prod/rman/df_t794754324_s12_p1
List of Datafiles in backup set 12
File LV Type Ckp SCN    Ckp Time Name
+6 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile005.dbf+
+10 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile009.dbf+
+17 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile004.dbf+
+20 Full 30013719101 16-AUG-12 /u01/oradata/dbproddata/datafile011.dbf+
archive logs generated after SCN 30013719101 not found in repository
Media recovery start SCN is 30013719101
Recovery must be done beyond SCN 30013719101 to clear data files fuzziness
Finished restore at 23-OCT-12
RMAN>
Thanks for reply,
Nonuday

Background process BCTL_** terminated due to missing confirmation

Hi Experts,
I have a step in Process chain for activation of a request in DSO. But its failing frequently with error message "Background process BCTL_* terminated due to missing confirmation*". I tried to remove the step from process chain and rebuild it, this avoided the failure for a day. But its failing again at same place.
Can you please guide if anything can be done to stop this failure in future?
Regards,
Nirmal

Hi,
I also faced the same issue.
Error when activate DSO in SAP BI :          "Background process BCTL_*   terminated due to missing confirmation"
I Resolved by the following way:
Steps :
1.ODS Activation window > Click the button u201CActivate in parallelu201D> Changed    the Number of process 3 to 1-->Save
2.ODS Activation window >Click the button u201CGet SIDs in parallelu201D> Changed    the Number of process 3 to 1--> Save
Then start the activation
Successfully completed.
Hope it will help.
Thanks & Best Regards,
Hema

Write Failure due to packet loss

Hi All,
Is it possible to occur a cache put failure due to packet loss. The below JMX report log (network-health-detail.txt) shows that TX success as 0.9999 for NodeId(8 PROXY node) and RxSuccess shows 0.9999 (node id 9 which is a STORAGE) exactly the same time.
At the same time I have inserted a cache item which went missing in the cache.
Is it possible to correlate the cache loss with the below data.
Please correct me if my understanding is work. Really looking forward for some expert look at this.
Regards
Srinivas
Batch Counter Report Time RefreshTime Node Id Tx Success Rx Success PacketsSent Current Packets Sent PacketsResent Current Packet Resent PacketsRepeated Current Repeated PacketsReceived Current Packets Received
24962 Thu May 05 15:54:37 BST 2011 Thu May 05 15:54:37 BST 2011 8 0.9999806938625789 1.0 116249593 51797.0 20 1.0 179 0.0 479093147 107230.0
24962 Thu May 05 15:54:37 BST 2011 Thu May 05 15:54:37 BST 2011 9 1.0 0.9999898626387551 110148867 169211.0 118 0.0 61.0 55759817 98645.0

It is more likely that you had other issues that caused your data to go "missing". Lost packets would be resent anyway so should get there eventually. The success rates of 0.9999 would be fine, you would be lucky to get a success rate of 1.0 all the time unless your cluster was not doing much.
When you say the data goes "missing" what do you mean. Presumably you do a put to get data into the cache, how to you try to get it back - a get or a query using a Filter.
What classes are you using for the keys - this can be important and can affect whether your cache works as you expect it to.
JK

Install failure due to "faulty DVD" problem: only with Family Pack?

After going through a few threads on the subject of installation failure due to tbe pseudo-faulty DVD, I have the impression that many users mention that they were using a Family Pack install DVD or in one case a "drop in". The former is my case. Please post if you have had this problem with Leopard install, and whether you were using a single licence, family pack or drop in. It's just a hunch, but perhaps this problem only affects a specific set of disks.

I believe that they are holding back on sending a new DVD until they know why there were defective ones. I read somewhere that they require a new SKU so that they will actually be a separate batch.
Can you borrow a DVD from anyone to install Leopard? You certainly would be allowed to legally do that. I am surmising that Apple is overloaded with requests for a replacement DVD and really want to make sure it works. You know that old thing about "fool me once..."
Stuff happens - but with Leopard, a lot of stuff sure happened at once. They sold 2 million DVDs. If only 5% have problems, that's a lot of problems to deal with, one at a time.
In time it will sort itself out, but in the meantime the rooms are full of smoke

ETL Failure Due to Failure of a Task

Hi All,
I am getting ETL failure due to failure of a task, sporadically. Also, when i re-run the ETL, the ETL completed successfully.
I have copied the informatica session log file.
DIRECTOR> VAR_27027 Use default value [0] for user-defined workflow/worklet variable:[$$passInStatus].
DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].
DIRECTOR> VAR_27028 Use override value [SEBL_80] for session parameter:[$DBConnection_OLTP].
DIRECTOR> VAR_27028 Use override value [1] for mapping parameter:[$$DATASOURCE_NUM_ID].
DIRECTOR> VAR_27028 Use override value [] for mapping parameter:[$$Hint1].
DIRECTOR> VAR_27028 Use override value [] for mapping parameter:[$$Hint2].
DIRECTOR> TM_6014 Initializing session [VisibilityActivityParty_Full] at [Wed Aug 17 00:31:31 2011]
DIRECTOR> TM_6683 Repository Name: [Oracle_BI_DW_Base]
DIRECTOR> TM_6684 Server Name: [Oracle_BI_DW_Base_Integration_Service]
DIRECTOR> TM_6686 Folder: [SDE_SBL_80_Adaptor]
DIRECTOR> TM_6685 Workflow: [VisibilityActivityParty_Full]
DIRECTOR> TM_6101 Mapping name: VisibilityActivityParty [version 1]
DIRECTOR> TM_6827 [D:\Informatica\PowerCenter8.1.1\server\infa_shared\Storage] will be used as storage directory for session [VisibilityActivityParty_Full].
DIRECTOR> CMN_1802 Session recovery cache initialization is complete.
DIRECTOR> TM_6703 Session [VisibilityActivityParty_Full] is run by 32-bit Integration Service [node01_sb8anaprd], version [8.1.1 SP5], build [0822].
MANAGER> PETL_24058 Running Partition Group [1].
MANAGER> PETL_24000 Parallel Pipeline Engine initializing.
MANAGER> PETL_24001 Parallel Pipeline Engine running.
MANAGER> PETL_24003 Initializing session run.
MAPPING> CMN_1569 Server Mode: [ASCII]
MAPPING> CMN_1570 Server Code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING> TM_6151 Session Sort Order: [Binary]
MAPPING> TM_6156 Using LOW precision decimal arithmetic
MAPPING> TM_6180 Deadlock retry logic will not be implemented.
MAPPING> TM_6307 DTM Error Log Disabled.
MAPPING> TE_7022 TShmWriter: Initialized
MAPPING> DBG_21075 Connecting to database [obieeprd], user [OLAP]
MAPPING> DBG_21474 Warning: Update Strategy transform [UPDTRANS] is disabled. Set session type to [Data Driven] to enable it.
MAPPING> TM_6007 DTM initialized successfully for session [VisibilityActivityParty_Full]
DIRECTOR> PETL_24033 All DTM Connection Info: [<NONE>].
MANAGER> PETL_24004 Starting pre-session tasks. : (Wed Aug 17 00:31:31 2011)
MANAGER> PETL_24027 Pre-session task completed successfully. : (Wed Aug 17 00:31:31 2011)
DIRECTOR> PETL_24006 Starting data movement.
MAPPING> TM_6660 Total Buffer Pool size is 36000000 bytes and Block size is 65536 bytes.
READER_1_1_1> DBG_21438 Reader: Source is [SB8PRD], user [SIEBEL]
READER_1_1_1> BLKR_16003 Initialization completed successfully.
WRITER_1_*_1> WRT_8146 Writer: Target is database [obieeprd], user [OLAP], bulk mode [ON]
WRITER_1_*_1> WRT_8106 Warning! Bulk Mode session - recovery is not guaranteed.
WRITER_1_*_1> WRT_8397 Appending output data to file [D:\Informatica\PowerCenter8.1.1\server\infa_shared\BadFiles\w_act_party.bad] (initial size [717]).
WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL INSERT statement:
INSERT INTO W_ACT_PARTY(INTEGRATION_ID,DATASOURCE_NUM_ID,ETL_PROC_WID,TABLE_WID,ACTIVITY_ID,PARTY_ID) VALUES ( ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL UPDATE statement:
UPDATE W_ACT_PARTY SET ETL_PROC_WID = ?, ACTIVITY_ID = ?, PARTY_ID = ? WHERE INTEGRATION_ID = ? AND DATASOURCE_NUM_ID = ? AND TABLE_WID = ?
WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL DELETE statement:
DELETE FROM W_ACT_PARTY WHERE INTEGRATION_ID = ? AND DATASOURCE_NUM_ID = ? AND TABLE_WID = ?
WRITER_1_*_1> WRT_8270 Target connection group #1 consists of target(s) [W_ACT_PARTY]
WRITER_1_*_1> WRT_8003 Writer initialization complete.
READER_1_1_1> BLKR_16007 Reader run started.
READER_1_1_1> RR_4029 SQ Instance [SQ_S_ACT_EMP] User specified SQL Query [SELECT
     AEMP.ROW_ID,
     AEMP.ACTIVITY_ID,
     U.PAR_ROW_ID
FROM
     V_ACT_EMP AEMP,
     S_USER U
WHERE
     AEMP.EMP_ID = U.ROW_ID]
READER_1_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
WRITER_1_*_1> WRT_8005 Writer run started.
WRITER_1_*_1> WRT_8158
*****START LOAD SESSION*****
Load Start Time: Wed Aug 17 00:31:32 2011
Target tables:
W_ACT_PARTY
READER_1_1_1> RR_4050 First row returned from database to reader : (Wed Aug 17 00:31:32 2011)
LKPDP_1> DBG_21097 Lookup Transformation [LKP_W_ACT_PARTY]: Default sql to create lookup cache: SELECT ETL_PROC_WID,INTEGRATION_ID,TABLE_WID,DATASOURCE_NUM_ID FROM W_ACT_PARTY ORDER BY INTEGRATION_ID,TABLE_WID,DATASOURCE_NUM_ID,ETL_PROC_WID
LKPDP_1> TE_7212 Increasing [Index Cache] size for transformation [LKP_W_ACT_PARTY] from [1048576] to [1050000].
LKPDP_1> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_1:READER_1_1> DBG_21438 Reader: Source is [obieeprd], user [OLAP]
LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
LKPDP_1:READER_1_1> BLKR_16019 Read [0] rows, read [0] error rows for source table [LKP_W_ACT_PARTY{{DSQ}}] instance name [LKP_W_ACT_PARTY{{SRC}}]
LKPDP_1:READER_1_1> BLKR_16008 Reader run completed.
LKPDP_1:TRANSF_1_1> DBG_21682 Lookup table row count : 0
LKPDP_1:TRANSF_1_1> DBG_21297 Lookup cache row count : 0
LKPDP_1:TRANSF_1_1> DBG_21294 Lookup cache creation completed : (Wed Aug 17 00:31:32 2011)
LKPDP_1:TRANSF_1_1> CMN_1671 Created new cache files PMLKUP12190_9W32.[dat/idx] in directory D:\Informatica\PowerCenter8.1.1\server\infa_shared\Cache for Lookup [LKP_W_ACT_PARTY].
LKPDP_1:TRANSF_1_1> DBG_21641 LKP_W_ACT_PARTY: Index cache size = [1050000], Data cache size = [2097152]
LKPDP_1:TRANSF_1_1> DBG_21216 Finished transformations for Source Qualifier [LKP_W_ACT_PARTY{{DSQ}}]. Total errors [0]
TRANSF_1_1_1> CMN_1079 WARNING: Lookup table contains no data.
TRANSF_1_1_1> DBG_21524 Transform : LKP_W_ACT_PARTY
TRANSF_1_1_1> DBG_21313 Lookup table : W_ACT_PARTY
TRANSF_1_1_1> DBG_21562 WARNING : Output rows from LKP_W_ACT_PARTY will be the default port value
LKPDP_2> DBG_21097 Lookup Transformation [LKP_ETL_PROC_WID]: Default sql to create lookup cache: SELECT ETL_PROC_WID,ROW_WID FROM W_PARAM_G ORDER BY ROW_WID,ETL_PROC_WID
LKPDP_2> TE_7212 Increasing [Index Cache] size for transformation [LKP_ETL_PROC_WID] from [1048576] to [1050000].
LKPDP_2> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_2:READER_1_1> DBG_21438 Reader: Source is [obieeprd], user [OLAP]
LKPDP_2:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_2:READER_1_1> BLKR_16007 Reader run started.
LKPDP_2:READER_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
LKPDP_2:READER_1_1> BLKR_16019 Read [0] rows, read [0] error rows for source table [LKP_ETL_PROC_WID{{DSQ}}] instance name [LKP_ETL_PROC_WID{{SRC}}]
LKPDP_2:READER_1_1> BLKR_16008 Reader run completed.
LKPDP_2:TRANSF_1_1> DBG_21682 Lookup table row count : 0
LKPDP_2:TRANSF_1_1> DBG_21297 Lookup cache row count : 0
LKPDP_2:TRANSF_1_1> DBG_21294 Lookup cache creation completed : (Wed Aug 17 00:31:32 2011)
LKPDP_2:TRANSF_1_1> CMN_1671 Created new cache files PMLKUP12190_10W32.[dat/idx] in directory D:\Informatica\PowerCenter8.1.1\server\infa_shared\Cache for Lookup [LKP_ETL_PROC_WID].
LKPDP_2:TRANSF_1_1> DBG_21641 LKP_ETL_PROC_WID: Index cache size = [1050000], Data cache size = [2097152]
LKPDP_2:TRANSF_1_1> DBG_21216 Finished transformations for Source Qualifier [LKP_ETL_PROC_WID{{DSQ}}]. Total errors [0]
TRANSF_1_1_1> CMN_1079 WARNING: Lookup table contains no data.
TRANSF_1_1_1> DBG_21524 Transform : LKP_ETL_PROC_WID1
TRANSF_1_1_1> DBG_21313 Lookup table : W_PARAM_G
TRANSF_1_1_1> DBG_21562 WARNING : Output rows from LKP_ETL_PROC_WID1 will be the default port value
WRITER_1_*_1> WRT_8167 Start loading table [W_ACT_PARTY] at: Wed Aug 17 00:31:32 2011
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8229 Database errors occurred:
ORA-01400: cannot insert NULL into (ETL_PROC_WID)
Database driver error...
Function Name : Execute Multiple
SQL Stmt : INSERT INTO W_ACT_PARTY(INTEGRATION_ID,DATASOURCE_NUM_ID,ETL_PROC_WID,TABLE_WID,ACTIVITY_ID,PARTY_ID) VALUES ( ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8425 ERROR: Writer execution failed.
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8114
Row # [1] in bad file
WRITER_1_*_1> CMN_1053 : Rowdata: ( RowType=0(insert) Src Rowid=1 Targ Rowid=1
INTEGRATION_ID (INTEGRATION_ID:Char.30:): "1-B8THY"
DATASOURCE_NUM_ID (DATASOURCE_NUM_ID:Double:): "1.000000000000000"
ETL_PROC_WID (ETL_PROC_WID:Double:): "(NULL)"
TABLE_WID (TABLE_WID:Double:): "68.00000000000000"
ACTIVITY_ID (ACTIVITY_ID:Char.15:): "1-N8FBX"
PARTY_ID (PARTY_ID:Char.15:): "0-1"
WRITER_1_*_1> WRT_8164 Error loading into target [W_ACT_PARTY] : Bad rows exceeded Session Threshold [1]
WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> CMN_1022 Database driver error...
CMN_1022 [
ORA-24795: Illegal ROLLBACK attempt made
Database driver error...
Function Name : Commit
Database driver error...
Function Name : Rollback]
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8183 Rollback failed for the target [W_ACT_PARTY]
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8080 Writer run terminated. [Error loading data and error threshold reached]
WRITER_1_*_1> WRT_8168 End loading table [W_ACT_PARTY] at: Wed Aug 17 00:31:32 2011
WRITER_1_*_1> WRT_8035 Load complete time: Wed Aug 17 00:31:32 2011
LOAD SUMMARY
============
WRT_8036 Target: W_ACT_PARTY (Instance Name: [W_ACT_PARTY])
WRT_8038 Inserted rows - Requested: 488 Applied: 0 Rejected: 1 Affected: 0
WRITER_1__1> WRT_8043 ****END LOAD SESSION*****
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [W_ACT_PARTY] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [UPDTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [UPDTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [FILTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [FILTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [LKP_ETL_PROC_WID] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [LKP_ETL_PROC_WID] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [EXPTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [EXPTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
TRANSF_1_1_1> DBG_21511 TE: Fatal Transformation Error.
MANAGER> PETL_24031
***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
Thread [READER_1_1_1] created for [the read stage] of partition point [SQ_S_ACT_EMP] has completed: Total Run Time = [0.656254] secs, Total Idle Time = [0.390627] secs, Busy Percentage = [40.476246].
Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [SQ_S_ACT_EMP] has completed: Total Run Time = [0.562504] secs, Total Idle Time = [0.406252] secs, Busy Percentage = [27.777928].
Thread [WRITER_1_*_1] created for [the write stage] of partition point [W_ACT_PARTY] has completed. The total run time was insufficient for any meaningful statistics.
MANAGER> PETL_24005 Starting post-session tasks. : (Wed Aug 17 00:31:33 2011)
MANAGER> PETL_24029 Post-session task completed successfully. : (Wed Aug 17 00:31:33 2011)
MAPPING> TE_7216 Deleting cache files [PMLKUP12190_9W32] for transformation [LKP_W_ACT_PARTY].
MAPPING> TE_7216 Deleting cache files [PMLKUP12190_10W32] for transformation [LKP_ETL_PROC_WID].
MAPPING> TM_6018 Session [VisibilityActivityParty_Full] run completed with [0] row transformation errors.
MANAGER> PETL_24002 Parallel Pipeline Engine finished.
DIRECTOR> PETL_24013 Session run completed with failure.
DIRECTOR> TM_6022
SESSION LOAD SUMMARY
================================================
DIRECTOR> TM_6252 Source Load Summary.
DIRECTOR> CMN_1740 Table: [SQ_S_ACT_EMP] (Instance Name: [SQ_S_ACT_EMP])
     Output Rows [50592], Affected Rows [50592], Applied Rows [50592], Rejected Rows [0]
DIRECTOR> TM_6253 Target Load Summary.
DIRECTOR> CMN_1740 Table: [W_ACT_PARTY] (Instance Name: [W_ACT_PARTY])
     Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [1]
DIRECTOR> TM_6023
===================================================
DIRECTOR> TM_6020 Session [VisibilityActivityParty_Full] completed at [Wed Aug 17 00:31:33 2011]
Can some one help me to debug the issue please ?
Thanks

Hi Nat,
Thanks a lot for your response.
I am running this ETL task from DAC. This task is a part of Daily Full load ETL. As i mentioned earlier, this task fails sporadically and failing till now. After restarting the ETL, it gets completed.
Please let me know if you have any question.
Thanks,
Neeraj

Block documents due to missing business partner

Hello to everyone,
I have problem with blocked documents in GTS due the missing external business partner account. I have to give for every blocked document, the business partner account manually in order to release the document. Eventhough the vendor master record has been correctly maintained, also on purchasing organization, I can not understand why the business partner account is missing in GTS. In Screedshot you can see first line is always blocked with block sign.
Can anybody help me to find the solution for that ? Thanks in advance.
Please see attached screenshot (unfortunately avaliable in German language only, I hope you would understand).

Hi Aman,
Thanks for your replay. I have again tested the Business parter transfer by changing in name field. The data was transfered sucessfully from R/3 to GTS.
Regards,
Iftikhar

Document Store Operation Failed due to missing authorisations.

Hi
I am using BW 3.5, One of the user is getting the following error message while accessing one of the report:
Document Store Operation Failed due to missing authorisations.
The user has previously accessed this report many times. But when I tied to access the report, there was no problem.
Could any one of you advise me how to rectify this error?
Many Thanks in advanc
Regards
Ishi

Hi Suresh
Thanks for the response; I have checked authorizations and user is authorised to access all the existing reports in BW. Checks were successful.
What might be the reason then?
Thanks

'Document store operation failed due to missing authorization'

Hi all,
I am getting the error message 'Document store operation failed due to missing authorization' when trying to save the workbook as the existing Workbook after changing the structure for it. We are using the Authorization Hierarchies.
What is the problem and how can I fix it, PLEASE ???
Thanks.
Message was edited by: Venkat Kodi

check out the related thread:
What is this error

How do I update my InDesign CS3 plugins? I received a document from a colleague created in CS3 and I can't open it due to missing plugins.

How do I update my InDesign CS3 plugins? I received a document from a colleague created in CS3 and I can't open it due to missing plugins.

The error message is below. When I get info on the file it says it's a CS3 file.

Asset values cannot be displayed due to missing text

Hi guru's,
I am facing the problem while i am displaying the asset values,i am able to create asset through as91 but when i go for awo1n system showing error" Asset values cannot be displayed due to missing"
help would be appreciated.
Thanks
Ravi

Hi Vyas,
I am getting error like below.
Asset values cannot be displayed due to missing texts
Message no. AY363
Diagnosis
The values of the selected asset cannot be displayed. Text elements are missing in logon language EN.
System response
Processing is terminated.
Procedure
First, check if you are logged on in a language that is maintained for this system.
This error can also occur, if the company code of the selected asset is assigned to a chart of depreciation that is not fully maintained.
In many cases, the problem can be corrected by re-importing the missing texts from the reference chart of depreciation. You can do this using repair program RACORR14. Refer to SAP note 0773639 for more information.
Thanks
Ravi

Anytime I open firefox I get a verizon installation started and then stops at 30%, then goes to "the flow will not proceed due to missing hand-off parameters: cutomertype.

Anytime I open Firefox a Verizon "resume verizon high speed installation" icon appears and then automatically Verizon installation appears, stops at 30%. Then the box goes white and "The flow will not proceed due to Missing Hand-off Parameters:
customertype
guid value=2219665f-914a-b241-28ef-00254bc03fc8
ver value=9.2.0
accesstype value=
service_provider value=verizon
customertype value=
sp value=0
thd value=238147
password value=
language value=english
line value=
phonenumber value=
regstep value=wba1
cpu value=2147
etc..
Verizon/frontier tech had me restart modem and clear cache but the problem continues.

solved

W540 - Failure due to missing i/o HD light

Similar Messages

Maybe you are looking for