WAD - Problems with Filter

Hi Friends,
I have got the feedback from our user about new web applications implemented with WAD 7.x.
Almost everybody does not like new filters.
That is why I want to ask if it is possible to change layout of the filter or use somehow the old ones (I think in BEx Analyzer it is possible to change layout of the filters).
Two things are particularly uncomfortable:
1. If we want to go into the filter, at first we have to choose "edi"t (really unnecessery), In the old version it was better.
2.I can not find possibility in filter inside to "Select All" position. Do you know maybe some workaround.
Regards
Erwin

Dear Erwin,
This "Edit" option will allow you to change the values of Characteristic or KF.Either you can select the value for a characteristic through Dropdown or select "Edit"->Selector dialog->Select the values.
And Selecting all the values in the values in the selector dialog is not possible with Web report,You have to select one by one.
As you said,this is not user friendly.
Rgds,
Murali

Similar Messages

  • Problems with filter exception using Network IP range

    We are using a spam filtering service for out incoming email. As such, all
    our email is directed to our SMTP server from their IP address range. We
    employ a dual firewal set up. We have a Netscreen firewall connected to the
    Internet and the Border Manager 3.8 server sits between the Netscreen and
    our internal network. On the BM server I have set up a generic proxy with a
    proxy port of 1025 to proxy the incoming email to our internal mail server.
    The Netscreen is set up to forward all SMTP (port 25) traffic to the
    BorderManager server on port 1025. Using FiltCfg I also set up a packet
    filter exception to allow traffice from the service providers network
    (Network = 104.56.144.0, Mask = 255.255.248.0) to port 1025. With this
    setup most email is received just fine. However I was getting reports of
    bounced and delayed email. Working with our service provider it was
    detemined that randomly some connections were failing. I used PktScan to
    collect packet trace infomation from our BM server. On a regular basis
    there are groups of SYN packets from the service providers email servers
    which are not receiving a response from the BM server. In some cases the BM
    server does eventuall respond with a SYN/ACK. There are also times when the
    BM server responds immediately after the first SYN. All the incoming
    connections from the service provider are currently comming in from two IP
    addresses, 104.56.144.247 and 104.56.145.247. The BM server is showing the
    same problem for both IP addresses, sometimes it responds immediatley to the
    SYN, sometimes it takes a few SYN packets before it responds, and sometimes
    the BM server never responds to the connection attempt. On a whim I added
    filter exceptions which specifed the two host IP addresses specifically
    (other than that the rules are identical to the one using the Network
    specification). After doing this the BM server is now responing immediately
    to all the incoming SMTP connection attempts from the service provider. Why
    would I be seeing this problem with the filter exception defined with a
    Network specification but not with Host specifications? Is there anything I
    can do to fix this?
    Thank you for any help provided,
    Brad Johnson

    Yes. I created 8 separate 255.255.255.0 exceptions. In viewing the packet
    trace data for the last couple of days it appears this resoloved the
    problem.
    Thanks
    Brad Johnson
    "Craig Johnson" <[email protected]> wrote in message
    news:[email protected]..
    > In article <XCo8l.13813$[email protected]>, Brad Johnson
    > wrote:
    >> Both servers are running NW 6.5 sp 6. After this problem started I
    >> applied
    >> BM38sp5_IR1, TCP681K, and wsock6o. This had no affect on the issue.
    >>
    >> If I create individual exceptions for the IP addresses I am currently
    >> receiving mail from, rather than using the range of potential addresses,
    >> the
    >> problem goes away.
    >>
    > Well, it sounds definitive enough, but I think if it were a generic issue
    > to
    > the patch level I would have heard about it from my clients who use
    > Postini
    > mail filtering service. All of the Postini-related servers have a network
    > address as a source in the filter exceptions for smtp.
    >
    > Instead of using a 255.255.248.0 mask, does it work if you set up 8
    > different
    > 255.255.255.0 exceptions?
    >
    >
    > Craig Johnson
    > Novell Support Connection SysOp
    > *** For a current patch list, tips, handy files and books on
    > BorderManager, go to http://www.craigjconsulting.com ***
    >
    >

  • Photosho cs4 - problem with filter liquify and gallery

    Hello averydoby, when i try to open the filters liquify and the gallery filters happens that before you open takes 10 minutes to load and when you open the program takes any action carried out for 2-3 minutes. The problem essentially is that charge too.
    I own a compute macbook pro with 512 mb video card and 2 gb of ram, I have also tried to use the filters with images of a few kb but the same thing happens.
    Someone knows what could be the problem?
    Thanks to all

    I asked because I had the same problem with PS CS2 and mac OS 10.2.8 on a 2 x 1Ghz mac.
    (adbobe level 3 Support was able to reproduce the error but there was no solution)
    I don't have the this Problem neither with PS CS4 nor PS CS2 on a mac pro (early 2008) running mac os 10.5.6 anymore.
    I was just curious if I 'd have an idea to solve this problem.

  • Problem with filter object

    Hi, i have a filter (client number) in my WAD
    In a query i have the same client number infoobject with some attributes as a detail.
    When i run the WAD in Internet Explorer, and i search by client number, the query detail don´t show me the client number and the attributes.
    I don´t know what's the problem
    Thanks

    Hi,
    By default you get data for first 1000 records and the client may be more than that. Try increasing teh number of records under Heading "Maximum"

  • Problem with filter function in tableview

    Hello,
    I am face the whole day with an issue. I hope to find an expert to solve my problem.
    I have a table on my view. And in most cases it is a standard functionality to filter the columns via mouseclick (see excel).
    So what I want is to implement these function in my own coding. When the event is started my table should be filtered automatically with previously (in the coding) defined options.
    So, how to implement this requirement?
    Best regards,
    Marcus

    Hi Markus,
    If I understand it correctly then you have a dropdown box and on the basis of value selected in dropdown box you need to filter the records displayed in the table view below...
    If this is the requirement then you will have to write your custom code to filter data. For your dropdown field redefine get_p_xxxx to add a server event once the value is selected in dropdown box.
    Please refer to:
    Re: Tableview - get changed data event???
    Since server round trip would be triggered you can loop on data from your context and filter it in do_prepare_output or else you can create your event handler as well...
    e Regards,
    Bhushan

  • Problems with "filter","zoom""#position""-moz-opacity""right""width""verical-align""ignored declaration"

    Are these problems related to any add-ons? I use Mac latest OS and version 4.0 Firefox.All my extensions and plugins are as far as I know updated to latest version.

    I am sorry, but you have changed the CSS beyound recognition; I do not want to spend my time going through it to correct it.
    One example that has angered me is
    BROWSER HACKS: the hacks below should not be changed unless you are an expert
    /* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
    ul.MenuBarVertical iframe
        position: absolute;
        z-index: 1010;
        filter:alpha(opacity:0.1);
        margin: 0;
        padding: auto;
        list-style-type: katakana;
        font-size: 100%;
        cursor: default;
        width: 13em;
        border-top-color: #edeeee;
        border-top-style:groove;
        border-bottom-color:#313132;
            border-bottom-style:groove;
        border-left-color:#cbcccd;
            border-left-style:groove;
        border-right-color:#3d3d3e;
        border-right-width: thin;
            border-right-style:groove;
    Changing this has not made you an expert
    Another example on or about line 155 is this line which is sure to upset the browser.
    ul.MenuBarVertical a:focus
    Yet another one
    /* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
    ul.MenuBarVertical ul.MenuBarSubmenuVisible
       left: -11px;
        border-top-color: #edeeee;
        border-top-style:groove;
        border-bottom-color:#313132;
        border-bottom-style:solid;
            border-bottom-style:groove;
        border-left-color:#cbcccd;
            border-left-style:groove;
        border-right-color:#3d3d3e;
        border-right-width: thin;
            border-right-style:groove;
    I suggest you start with a new widget, but before you do, read this http://www.dwcourse.com/dreamweaver/ten-commandments-spry-menubars.php#one
    Gramps

  • Problem with filter mapping

    Hello.
    I am creating a login web application. At the moment I am using tomcat 5.5. I am using the memoryRealm to authenticate the user. This seems to be a very common problem but after a day of searching cannot find why this is not working. Basically I have created my filter like so:
    package com.login;
    import javax.servlet.*;
    public class LoginFilter implements Filter {
         protected FilterConfig filterConfig;
         public void init(FilterConfig filterConfig) throws ServletException {
              this.filterConfig = filterConfig;
         public void destroy() {
              this.filterConfig = null;
         public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain)
              throws java.io.IOException, ServletException {
              System.out.println("Hello World!");
              System.out.println("I am working!");
              chain.doFilter(request, response);
    }This is then mapped in the web.xml descriptor:
    <filter>
              <filter-name>LoginFilter</filter-name>
              <filter-class>com.login.LoginFilter</filter-class>
              <description>Performs pre-login and post-login operation</description>
         </filter>and the mapping is as follows:
    <filter-mapping>
              <filter-name>LoginFilter</filter-name>
              <url-pattern>/j_security_check</url-pattern>
         </filter-mapping>I then have a JSP form whos action is "j_security_check" when the user clicks submit this should cause the mapping to trigger my servlet. This is not the case and I cannot see why my filter is not being triggered.
    Any ideas?

    Brent,
    Thanks for reporting this. As it turns out, we removed the /* filter-mapping, in the 10.1.2.1 release, and did not add the ordDeliverMedia mapping. I just tested it and yes, with the 10.1.2.1 we now get the same NullPointerException as you got. When creating a non-Jhs ViewController project with drag and drop, there is no longer a /* filter-mapping, and a new ordDeliverMedia mapping, so your fix is as it should be, and we will add this mapping in the next maintenance release.
    Steven Davelaar,
    JHeadstart Team.

  • OWB9i - problems with filter

    Does anybody know that problem :
    when I use a filter which expression uses a referenced column, the load doesn't work properly, but it works fine with the result of a function.

    Look at my shema :
    sysdate -------------> |
    SOURCE table-------> FILTER ---------> | TARGET table
    when I remove the sysdate pre-defined function, it works fine.
    when I remove the filter, it works fine.
    I can't leave the SYSDATE function and the filter in the same mapping !
    very strange, isn't it ? Mark,
    For this kind of filters, I would recommend you to use external tables (if your database is 9i), as the set of filtering operators on a flat files is limited. In Oracle 9i you can view a formatted flat file as a table and perform a powerful set of SQL operations on them (including filtering). These objects are called external tables. Please refer to Oracle 9i documentation, by going to http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/index.htm and searching on the keyword "external tables".
    If you cannot make use of external tables, you will have to import the records into a staging table and than apply the filter in a second mapping from the staging table to the target.
    Regards:
    Igor

  • Upload Excel File : Problem with Filter

    Hi Experts,
    by using "TMP_GUI_FILE_OPEN_DIALOG" with these parameters:
         window_title      = 'Please select an Excel File'
         default_extension = '*.xls'
         file_filter       = '*.xls'
         multiselection    = ' '
         init_directory    = 'C:\temp'
    it doesn't show any file the first time we call the Function, we have to close the window and then restart the Function Then it show all Fileformat, I just want to see .XLSX files.
    Any idea?
    Regards,
    David

    I found the solution:
    Initialisierung
      CONCATENATE 'Alle-Dateien(.)|.|'
                  'Word-Dateien(.doc)|.doc|'
                  'Bild-Dateien(.gif)|.gif|'
                  'Bild-Dateien(.jpg)|.jpg|'
                  'Mail-Dateien(.msg)|.msg|'
                  'PDF-Dateien(.pdf)|.pdf|'
                  'Bild-Dateien(.tif)|.tif|'
                  'Text-Dateien(.txt)|.txt|'
                  'Excel-Dateien(.xls)|.xls'
             INTO filter.
    Datei abfragen
      CALL METHOD cl_gui_frontend_services=>file_open_dialog
        EXPORTING
          window_title      = 'Datei auswählen'
          file_filter       = filter
          initial_directory = 'C:'
        CHANGING
          file_table        = i_file[]
          rc                = rcode
        EXCEPTIONS
          OTHERS            = 1.
    Regards,
    David

  • ALV problem (with filter use)

    Hi all !!
    When setting a filter on ALV grid (called with fm 'Reuse_alv_grid_display') after enter, the selection field are truncated at 10 bytes, also using a match code .
    the result of the list is consequently mistaken.
    Somebody know how to fix that ??
    Regards , Andrea

    Hi,
    Can you explain a little more? How are you setting the filter, and F4 at what place, is this a editable field which is having this issue?
    Regards,
    Ravi

  • Problem with filter gallery

    My filter gallery is not running anymore. Re-installed Photoshop but didn't work. What can I do?

    1. The Artistic Gallery will not show as an option in filters until you change it in the preferences dialogue box. Photoshop>File>Preferences>Plugins - show all Gallery Names
    2. Artistic filters will only work on 8 bit images - not 16 or 32, so save your original as a jpeg or some other 8 bit format. If your option is ghosted it is because the filter cannot be used  on your images bit size.

  • WAD problem with query variable sequence

    Hi Everyone,
    I have created 3 Queries of which all of them have common but different number of selection variables
    eg: query 1 : A, B,C,D,E
          Query 2: D
          Query 3: C
    I need to display the variables in WAD as displayed in Query 1.But they are displaying randomly.
    For this I arranged the variable sequence of Query 1 in the query designer using the menu path
    Query -> Properties and in the right panel select the "Variable sequence" tab
    But,it is still picking randomly.
    Is there any other option either in Query or WAD Designer?
    thanks,
    Taru

    try in this way
    keep variables only in query 1
    try if this will help

  • Problem with Filter function in bubbleSeries

    Hi,
    I have a bubbleSeries. Its dataprovider has item values having both blank('') and negative values. I don't want to show such values, hence I have used a filter function in which a check is made and adds those items which are valid.
    I have data for various years so I have used interpolation effect.
    While playing the animation or viewing data for different time series, a small bubble is displayed on top-left corner of the chart which is not part of the valid data.
    If I dont use a filter function, I dont get this small bubble on top-left corner. But as per my requirements, I need to have a filter function.
    Please help me in guiding through the reason of such behavior of filter function.
    Thanks,
    Tanu

    Hi Gregory,
    Please find below the sample code which shows a small bubble on top-left corner when animation is played. We need to click on "play" button to start the animation and "stop" button to stop the same.
    <?xml version="1.0" encoding="utf-8"?>
    <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                   xmlns:s="library://ns.adobe.com/flex/spark"
                   xmlns:mx="library://ns.adobe.com/flex/mx"
                   minWidth="955" minHeight="600"
                   creationComplete="init()" >
        <fx:Declarations>
           <mx:SeriesInterpolate id="seriesEffect" duration="1000"  easingFunction="Linear.easeIn"/>
        </fx:Declarations>
        <fx:Script>
            <![CDATA[
                import mx.charts.series.items.BubbleSeriesItem;
                import mx.collections.ArrayCollection;
                import mx.effects.easing.*;
                import mx.events.FlexEvent;
                private var oTimer:Timer =  new Timer(1000);
                private var currentDp:int = 1;
                [Bindable]
                public var expenses1:ArrayCollection = new ArrayCollection([          
                    { Profit:10, Expenses:10, Amount:''},
                    { Profit:'', Expenses:50, Amount:''},
                    { Profit:'', Expenses:41.6, Amount:''},              
                    { Profit:'', Expenses:43.6, Amount:''},
                    { Profit:'', Expenses:86, Amount:''},
                    { Profit:'', Expenses:11.4, Amount:''},              
                    { Profit:'', Expenses:99.2, Amount:''},
                    { Profit:'', Expenses:12.8, Amount:''},
                    { Profit:'', Expenses:'', Amount:10}
                [Bindable]
                public var expenses2:ArrayCollection = new ArrayCollection([
                    { Profit:30, Expenses:'', Amount:10},
                    { Profit:95, Expenses:-90, Amount:50},
                    { Profit:20, Expenses:60, Amount:23},
                    { Profit:67, Expenses:'', Amount:56},
                    { Profit:-23, Expenses:56, Amount:34},
                    { Profit:30, Expenses:'', Amount:10},      
                    { Profit:95, Expenses:-90, Amount:50},
                    { Profit:70, Expenses:30, Amount:93},
                    { Profit:22, Expenses:'', Amount:10}      
                private function init():void
                    oTimer.addEventListener(TimerEvent.TIMER,onTick);
                    bubbleSeries.dataProvider = expenses1;
               public function onTick(event:TimerEvent):void
                    if(currentDp == 1)
                        bubbleSeries.dataProvider = expenses2;
                        currentDp = 2;
                    else
                        bubbleSeries.dataProvider = expenses1;
                        currentDp = 1;
                private function clickHandler():void
                    oTimer.start();
               public function myFilterFunction(cache:Array):Array
                    var filteredCache:Array=[];
                    var n:int = cache.length;
                    for(var i:int = 0; i < n; i++)
                        var isValid:Boolean = true;
                        var bubbleSeriesItem:BubbleSeriesItem = BubbleSeriesItem(cache[i]);
                        if( bubbleSeriesItem.item.Profit == "" || bubbleSeriesItem.item.Expenses == "" || bubbleSeriesItem.item.Amount == "")
                            isValid= false;
                        if(isValid)              
                            filteredCache.push(bubbleSeriesItem);                   
                    return filteredCache;
            ]]>
        </fx:Script>
        <mx:Button x="10" label="Play" click="clickHandler()"/>
        <mx:Button x="250" label="stop" click="{oTimer.stop()}"/>      
        <mx:VBox x="10" y="100" width="80%" height="70%" label="Bubble" >      
            <mx:BubbleChart id="bubbleChart" width="100%" height="100%" showDataTips="true"
                            minRadius="5" maxRadius="15">
                <mx:series>
                    <mx:BubbleSeries  id="bubbleSeries"
                                      showDataEffect="{seriesEffect}"
                                      xField="Profit" yField="Expenses" radiusField="Amount"
                                      filterFunction="myFilterFunction"
                                      />
                </mx:series>
                <mx:horizontalAxis>
                    <mx:LinearAxis id="horLinAxis"  minimum="-100" maximum="100" />      
                </mx:horizontalAxis>
                <mx:verticalAxis>
                    <mx:LinearAxis id="verLinAxis" minimum="-100" maximum="100" />
                </mx:verticalAxis>
            </mx:BubbleChart>
        </mx:VBox>
    </s:Application>
    Please help.
    Thanks,
    Tanu

  • Problem with applying filter?

    Hello All,
      I am facing problem with filter.
      I am developing a smart sunc application using
      following BAPIs.
           GetList          MEREP_CONTACT_GETLIST        
           GetDetail        MEREP_CONTACT_GETDETAIL      
           Create           MEREP_CONTACT_CREATE         
           Modify           MEREP_CONTACT_MODIFY         
           Delete           MEREP_CONTACT_DELETE         
      I am using person number as filtering criteria.
      When i use emulator then it works properly.
      But at the MI client it does not seem to be working
      as all records are getting downloaded.
      Can anyone help me in this?
      Thanks in advacne.

    Hello Kishor,
    I am now getting following exceptions.
    [20060713 09:38:45:281] E [MI/Smartsync             ] Error while Smart Sync inbound processing: java.lang.IllegalStateException: No field available :ReusableFieldDescriptorIt [rowDescriptor=cZCONTACTSB_010, index=3]
    java.lang.IllegalStateException: No field available :ReusableFieldDescriptorIt [rowDescriptor=cZCONTACTSB_010, index=3]
         at com.sap.ip.me.smartsync.syncIn.processors.InternalRowProcessor.setNextFieldWithWriter(InternalRowProcessor.java:138)
         at com.sap.ip.me.smartsync.syncIn.processors.RowProcessorManager$RowProcessorDispatcher.setNextField(RowProcessorManager.java:409)
         at com.sap.ip.me.smartsync.syncIn.SaxSyncInProcessor$4.characters(SaxSyncInProcessor.java:730)
         at com.sap.ip.me.xmlParser.MIXMLEventHandlerManager.characters(MIXMLEventHandlerManager.java:72)
         at com.sap.ip.me.xmlParser.MIXMLParser.sendCharacters(MIXMLParser.java:263)
         at com.sap.ip.me.xmlParser.MIXMLParser.parse(MIXMLParser.java:158)
         at com.sap.ip.me.smartsync.syncIn.SaxSyncInProcessor.processSyncInMessage(SaxSyncInProcessor.java:87)
         at com.sap.ip.me.smartsync.syncIn.SyncInRuntimeImpl.processSyncInMessage(SyncInRuntimeImpl.java:250)
         at com.sap.ip.me.smartsync.core.SmartSyncRuntimeImpl.process(SmartSyncRuntimeImpl.java:344)
         at com.sap.ip.me.smartsync.core.SmartSyncRuntimeManager.process(SmartSyncRuntimeManager.java:214)
         at com.sap.ip.me.smartsync.core.SyncAdapter.process(SyncAdapter.java:56)
         at com.sap.ip.me.sync.SyncManagerImpl.processSingleContainer(SyncManagerImpl.java:160)
         at com.sap.ip.me.sync.SyncManagerMerger.processInboundContainers(SyncManagerMerger.java:166)
         at com.sap.ip.me.sync.SyncManagerImpl.processSyncCycle(SyncManagerImpl.java:709)
         at com.sap.ip.me.sync.SyncManagerImpl.syncForUser(SyncManagerImpl.java:1142)
         at com.sap.ip.me.sync.SyncManagerImpl.processSynchronization(SyncManagerImpl.java:774)
         at com.sap.ip.me.sync.SyncManagerImpl.synchronizeWithBackend(SyncManagerImpl.java:402)
         at com.sap.ip.me.sync.SyncManagerImpl.synchronizeWithBackend(SyncManagerImpl.java:285)
         at com.sap.ip.me.api.sync.SyncManager.synchronizeWithBackend(SyncManager.java:79)
         at com.sap.ip.me.apps.jsp.Home$SyncRunnable.run(Home.java:447)
         at java.lang.Thread.run(Thread.java:534)
    regards,
    Abhijit

  • Problem with affinetransformOp method...

    I have a serious problem with filter method
    I Want to make a image flipping or some other filtering by using
    AffineTransformOp
    but it printouts an erro like this
    cannot resolve symbol
    op.filter (img, flipped)
    (the error pointer shows ".after the op")
    a code from my one of the filters
    BufferedImage flipped = new BufferedImage(img.getHeight(), img.getWidth(),BufferedImage.TYPE_INT_RGB);
    AffineTransform trans = new AffineTransform(0, 1, 1, 0, 0, 0);
    AffineTransformOp op = new AffineTransformOp(trans, AffineTransformOp.TYPE_NEAREST_NEIGHBOR);
    op.filter(img, flipped); //img is my buffered image source
    I used some other ways like (img, null) but always give out error.
    thanks..

    Did you declare "img" as BufferedImage or something else?
    What is the full error message?

Maybe you are looking for