WAD Question

Hi,
I have a WAD report and im using another wad template to export my data to excel. I have a INFO web item which is passing all variables used in the report to excel. Now I wud like to pass all variables other than exit variables to excel. Is this possible. Im using the same excel export template in all wad reports and each wad report has diffferent set of variables. So Icant really list out the variables that i need to pass to excel using 1 INFO web item each for 1 variable.

Hi Rahul,
InfoField webitem only provides you display options for static/dynamic filters & all/specific variables with/without values. If your customer exit variables return values before display of variable screen, I'm afraid they will show up, else you always have the option to display only variables with values.
--Priya

Similar Messages

WAD question: fix each chart series to a specific key figure

Hi All,
I hope you can help.
In WAD is it possible to fix each series in a chart to a specific key figure from the data provider (query)?
We need to be able to do this because the opening position of our query has a number of hidden key figures, that are displayed later in navigation.
Without being able to fix the series to key figures, in the opening view some key figures are appearing as columns rather than lines and vice versa.
Thanks and regards
IM

Thanks for your help, Pcrao.
My scenario is:
I have 15 key figures in the columns of my query (data provider).
The first 12 of these KFs are to be displayed as bars (columns) and the last 3 as lines in the chart of my web query.
I can set this no problem in WAD.
But my problem is that because a number of my key figures are set as hide in the query designer (to be unhidden later in navigation) the last three KF's are displaying (incorrectly) as bars until I unhide all KF's in the navigation.
In other words, it seems to me that I need to fix each series in the chart editing to a specific key figure. But I don't know how.
Thanks again and regards
IM

When .ai files are actually PDFs

So, in an earlier thread today, AI or EPS?, Wade questioned whether .AI files are really PDFs.
I did a survey just now with Illustrator CS5 (15.0.2) on Mac OSX, on a document with a single letter 'p' (400pt Myriad Pro Regular). Saving in all current and historical Illustrator formats:
Bytes
Format
"file" output
226448
PDF
PDF document, version 1.5
927086
CS5.ai
PDF document, version 1.5
918678
CS4.ai
PDF document, version 1.5
924026
CS3.ai
PDF document, version 1.5
924062
CS2.ai
PDF document, version 1.4
1267139
CS.ai
PDF document, version 1.4
1196072
10.ai
PDF document, version 1.4
1102797
9.ai
PDF document, version 1.4
249039
8.ai
PostScript document text conforming DSC level 3.0
7179
3.ai
PostScript document text conforming DSC level 3.0
Now, I realize you might not trust the "file" program... If you're not familiar with it, according to the manpage:
file tests each argument in an attempt to classify it. There are three sets of tests, performed in this order: filesystem tests, magic tests, and language tests. The first test that succeeds causes the file type to be printed.
But it just does some crude (and not-so-crude) pattern matching.
You can also run some reports in Acrobat Pro. For instance, running "Report PDF Syntax Issues" produces two identical reports, except the AI version has a Color space section (different uuids, diffrent embedded subset font names, etc.). That's not very helpful.
Browsing the PDF contents does show some more information. Indeed, half of the file size difference is color space information, though I'm not sure what the other half is:
There are other subtle differences.
Convinced yet?

No one's harmed as we all know this since forever.
It is wel documented on the forum.
By not saving it with the pdf option check reduces the size a great deal many users use it to save master files and then do a save as with the option turned on when they place it in another application.
In case you are not familiar with this option turned off and printed to a postscript printer the file will print properly even if it does not display the right way.
At least that is my understanding.

Question about WAD 3.5 and Firefox 3.0

Hello everyone,
I have a question concerning WAD 3.5.
Our company is migrating from Internet Explorer 6.0 to Mozilla Firefox 3.0.
All right, when we execute a WAD template web in IE6 and hover the mouse over a graphic's legend, we are able to see an ALT text - that yellow-rectangle wrapped text.
In Firefox 3, however, we are not able to see the ALT text when we hover the mouse over a graphic's legend. Does anyone knows if there is anyway to make it work in Firefox, or is it a browser / WAD version limitation?
I know WAD 7.0 work just fine with graphic's ALT attribute, but at this moment we have to try to make it work in WAD 3.5.
Thanks in advance for you attention.
Carlos Eduardo Lacombe
Edited by: Carlos Eduardo Lacombe on Dec 9, 2008 1:26 PM

Ok Mike, thank you very much! I was already guessing it would really not work in Firefox, and we would have to look for alternative solutions.
We followed your advice and we are now trying to use a Firefox plugin named IE Tab, and it looks like its going to solve our problem.
Thanks a lot for your attention.
Sincerely,
Carlos Eduardo Lacombe

Question about WAD print version configuration

Hi gurus,
We are having a problem with the WAD print version. We have created two WAD templates, one of them is for be viewed at the portal and the other one for the export to PDF.
Our template has several tables(data providers) in a horizontal line. The template for the export is exactly like this original template, but despite this, when we press the "print version" button in the portal, the PDF appears desconfigure and shows the data providers one under the other, in a vertical line.
We have tried to change the size of the data providers but we are not getting the expected result.
Could anyone give me some idea of how to proceed correctly for this situation?
Thank you in advanced.
Manuel.

Ok Mike, thank you very much! I was already guessing it would really not work in Firefox, and we would have to look for alternative solutions.
We followed your advice and we are now trying to use a Firefox plugin named IE Tab, and it looks like its going to solve our problem.
Thanks a lot for your attention.
Sincerely,
Carlos Eduardo Lacombe

Question on WAD's "Variable Entry" screen values

Hi,
I've one Web Template Report contains "Variable Entry" screen.
It has one entry for Plant.
Also inside a report I'm having one DropDownList that is for Plant only.
My Requirement is:
If I enter some "1000" as a input in Plant at Variable screen, that same "1000" should be passed inside the report. And that corresponding DropDownList should show the "1000" as the selected value.
Now I'm getting "Show all values" as the default selected item.
Kindly suggest to achive this requirement.
Full points will be given.
Thanks
-Jay Jay

Hi,
1)If i didn't give any value in Variable Entry screen, in the result DropDownList shows "No data" in disabled mode.
Ans. Since you have not checked "Display All Values", i think if you dont give any selection in the Variable Screen, the DropDown box will not be highlighted.
2)The Selected plant Not only having Name and id, But also having all characteristics like, 1402,Pen,Business Partner: xxxxx, Distribution channel:xxx, etc.,
Ans. Since we are reading from the Master Data, i think all these values will also be displayed.
I still dont know if you are using WAD 3.5 or 7 ? Maybe we have better options in 7. You can try with different properties.
Hope it helps.

*** Question How to load a file into BI-Integrated Planning and use WAD 7.0

Hi, I created an manual DTP upload to my planning infocube and it works fine. The transformation rules convert 0CALMONTH into the relevant Calendar and Fiscal characteristics. So all of my Time Characteristics are fine, both Calendar and Fiscal.
However, When using the "How to load a file into BI-Integrated Planning and use WAD 7.0" solution, only the Calendar Characteristics are populated and not the Fiscal. The upload application somehow knows to populate the 0CALMONTH2, 0CALQUART1, 0CALQUARTER, and 0CALYEAR.
How can I get the upload to populate my Fiscal Period Characteristics?
Would it be best to modify the "Upload Application, or can I write a planning function to update the fiscal characteristics, or some other way?
Thanks!

My planning data is being uploaded via the SDN Planning File Upload Solution. What I did was end up modifiying the upload class ZCL_RSPLF_FILE_UPLOAD Method EXECUTE.
I added the following code if anyone is interested.
*{ INSERT BWDK902323 1
THIS SECTION OF CODE POPULATES THE FISCAL PERIOD CHARACTERISTICS
USING THE FISCAL YEAR VARIANT 'NK' AND THE CALENDAR MONTH/YEAR
FIELD-SYMBOLS <0FISCVARNT> TYPE /BI0/OIFISCVARNT. " Fiscal Year Variant
FIELD-SYMBOLS <0FISCYEAR> TYPE /BI0/OIFISCYEAR. " Fiscal Year
FIELD-SYMBOLS <0FISCPER> TYPE /BI0/OIFISCPER. " Fiscal Year/Period
FIELD-SYMBOLS <0FISCPER3> TYPE /BI0/OIFISCPER3. " Posting Period
FIELD-SYMBOLS <0CALMONTH> TYPE /BI0/OICALMONTH. " Calendar Month/Year
ASSIGN COMPONENT '0CALMONTH' OF STRUCTURE <L_S_DATA> TO <0CALMONTH>.
ASSIGN COMPONENT '0FISCPER' OF STRUCTURE <L_S_DATA> TO <0FISCPER>.
ASSIGN COMPONENT '0FISCVARNT' OF STRUCTURE <L_S_DATA> TO <0FISCVARNT>.
ASSIGN COMPONENT '0FISCPER3' OF STRUCTURE <L_S_DATA> TO <0FISCPER3>.
ASSIGN COMPONENT '0FISCYEAR' OF STRUCTURE <L_S_DATA> TO <0FISCYEAR>.
<0FISCVARNT> = 'NK'.
CALL FUNCTION 'FISCPER_FROM_CALMONTH_CALC'
EXPORTING
IV_CALMONTH = <0CALMONTH>
IV_PERIV = <0FISCVARNT>
IMPORTING
EV_FISCPER3 = <0FISCPER3>
EV_FISCPER = <0FISCPER>
EV_FISCYEAR = <0FISCYEAR>.
*} INSERT

Question in WAD

Its regaridng EXPORT command in WAD. I have a template A with all web items. I used a pushbutton
and assigned EXPORT commmand in XLS format. In the EXPORT command properties, we have a property Internal Display -->Web Template to choose the web template so that we can see A data in the selected template format.
Now when I leave this Web Template Parameter as default ( which means EXPORT is using same template A itself as the Excel Export template), and after running A report and click on the Export Pushbutton, I get a popup to Open/Save/Cancel the XLS document and the data is displayed in excel sheet which is fine.
But when I choose a template of my own (say Template B) in the EXPORT command property, then im not getting any
popup for Open/Save/Cancel and the data is opening up in a web page with excel format. I dont understand why its different! I want to open the exported data in a excel sheet not in web page in excel format.

Hi
Please replace the export to excel code with below piece of code in to the XHTML TAB of your web template
<bi:BUTTON type="COMPOSITE" index="2" >
<bi:CAPTION >
   <bi:text program="SAPLRRSV" key="748" />
     </bi:CAPTION>
      <bi:TOOLTIP >
         <bi:text program="SAPLRRSV" key="748" />
      </bi:TOOLTIP>
   </bi:ACTION type="CHOICE" value="INSTRUCTION" >
<bi:INSTRUCTION >
<bi:EXPORT >
<bi:TEMPLATE value="0ANALYSIS_PATTERN_EXPORT" text="Analysis Pattern Export" />                                                            </bi:EXPORT>
</bi:INSTRUCTION>
</bi:ACTION>
</bi:BUTTON>
Assing Points if helpfull.
Rajesh

Question about Chart in WAD ?

Hi everybody :
i have designed a query about data for every year , and each year has some months , but not every year has integrated data for every month ,it means there have some years only has data less than 12 months.
then i must prepare a chart relevant to this analysis , but i just want every year's overall result data to draw chart ?
how can i gain the overall result about every year ?
who can give some tips ?
tks very much !

should i design a special query for this chart ?
otherwise, have other methods more convenient ?
kindly you to give me any reply !

Question About Bex wad portfolio chart design

hi,
user wants to compare sales and cost value and see where the department is. ie user want to see sales as Xaxis and cost as Yaxis and department has bubbles in portfolio graph . but when i use this graph i am unable to assign the values to axis and graph i am not able dispalyed correctly . can anyone help me out for this example how to use this graph .
Department       Sales    /    Retail Value /    Cost Value
BUILDING         1,658     /       100         /      200
DECORATIVE       9,101    /         171     /          888
ELECTRICAL       7,663     /        3,025   /          946
anyone who has successfully designed portfolio chart pls give me your solution ,thanks very much.points will be rewarded.
Best regards,
Jason
Edited by: jason su on Aug 12, 2008 5:58 PM

Hello,
Goto start menu -> Run -> give '%temp%' and execute. This will show the temp folder here, then find the folder BW and delete this folder complately. Now open BEx analyzer for the first time after this & connect with system, so that the right texts are entered to the temp file in the desktop.
After this the issue should be fixed.
Best Regards,
Michael

Print button on WAD template

Hi,
Presently we are in BW 3.5 version with support pack 22. We enhanced the html code based on ' How to ... Web printing with MS Excel' document. We imported the transport file which contains package and ABAP Classes.
After click on the print button on Web report, it was giving the same result area in the same page instead of giving the excel open or save options.
How to debug the enhanced html code in the WAD template? How to check the ABAP class('ZCL_RSR_XLS_HELP_WINDOW_PRINT') which i used in the
code?
Or is there any way to print the result area of Web report?
Please help me.
Thanks in advance.

This question has been answered

How to change & manage different ports in a mixed web environment (BSP/WAD)

Hi everybody,
our scenario is the following:
We constructed a mixed environment web application, consisting out of a BSP application and WAD web templates. Unfortunately the url of web templates and the bsp-application differs - meaning the server is the same, but the port is different. That's why it is not easy to link the application each other, because for transportation reasons, we would like to have relative url paths.
After searching the SDN and reading several help files, we found out, that the port of the BSP can be changed by adding an entry to the HTTPURLLOC table.
See also: [Configuration Table HTTPURLLOC|http://help.sap.com/saphelp_nw70/helpdata/en/42/d547ab30b6473ce10000000a114e5d/frameset.htm]
We managed to do that and in addition we created a BEX role for our BSP application. But with the new port the BSP does not appear in the browser window. So we still didn't fulfil our requirement to call the BSP in a include item of the WAD without passing the complete URL server:port/sap/bsp/...
Question: How can we link the BSP out of the WAD environment, respectively is it possible to call the BSP with the same port, being used by the web templates...?
Thanks for any comments and hints!
Best regards,
Sebastian

Hi Raja and everybody,
thank you for your comments... meanwhile we just solved the problem by appliying method two mentioned above. Therefore we created a Customer web item class as denoted in [Creating an ABAP Class for the Custom Extension Web Item|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a1c1237d753ca2e10000000a42189b/content.htm].
In the Initialize method I constructed the IFrame HTML-Code:
DATA: serverURL TYPE STRING.
DATA: serverPort TYPE STRING.
DATA: bspName TYPE STRING.
DATA: iFrameURL TYPE STRING.
* Fetch the BSP port from internal table
SELECT SINGLE VALUE FROM it_table.
* Create iFrame URL
serverURL = 'https://www.sap.com'.
bspName = 'myBSP'.
CONCATENATE serverURL ':' serverPort '/' bspName INTO iFrameURL.
* Create the iFrame Tag
CLEAR generatedHTML.
generatedHTML = '<iframe src="%IFRAMEURL%" valign="top" width="100%"/>'.
REPLACE '%IFRAMEURL%' IN generatedHTML WITH iFrameURL.
In the execute the code is parsed with the method:
CALL METHOD cl_bics_cons_webitem_util=>string_2_utf8_xstring
Many thanks to Raja and everybody else for helping me!
Sebastian

Difference between Bex Analyzer and Bex WAD

Hi Every one,
I am pretty new to SAP, and working on SAP BW Front end.
I am pretty aware of Bex Analyzer and also Browser, but i always have a doubt about Bex WAD.
In my present job i talk to the users and take the requirments and create queries in the Bex analyzer which i am comfortable doing it.
I also know all the features of Analyzer and created quries and also published it on web, and also created workbooks and inserting multiple quries in the workbook etc etc..
However i have zero knowledge on WAD and how it is useful to me, and as if now i haven't got any requirment from the client for me to create any report in WAD or do some thing in WAD.
I have gone through SAP SDN help etc but i am not understanding it at all.
So can any one explain me in a laymans terms what WAD is and how it will be useful to me?
and also if possible send me link which has got PDF screen shots of what WAD is?
Points is for sure.
Regards,
Ram

Raj,
Thanks for the reply, but i still did not get the understanding about WAD. i have studied the link which you sent me.
I am still not able to understand how it is helpful for people like me,
See i create my report in Query designer, and i can execute the query in Analyser. and if i want i can execute it in the Web from my query designer, and also i can create chart on the web if i want.And i can Broadcaste it in the Web.
and also if i want i can create it in the workbook and create chart in that work book.
Then what is the point of Web Application Designer (WAD).
See i have created the Query in Designer in Development say Sales report Query on the infoprovider for SD, now what should i do with it in WAD.
How can i get it in WAD, i went to start> all Programs>Bex> WAD and i logged in to development and a sereen opend. And from here what i can do, i mean how can i open my created query in WAD?
As you guys know i am new to SAP itself, but i dont see any advantage about WAD, i read all the articals and there i found that i can create Web Items, HTML etc etc, but i already have HTML, when i execute my query from the Designer i get it in Web Browser...
See my question is simple, i have a query which i have created in the Query Designer, now how can i get it to WAD and after getting it what can i do with it??
If any one has a screen shots of there pls send me.
And Sanjeev has sent me a PDF which i saw earlear and i done the same in my WAD but i am not about to get it to work.
I have given the points to every one but still what i need i did not get yet.
Regards,
Ram

How do I delete a single line in a WAD input layout?

Hello to all,
I've created a standard delete function and I don't know how to "data bind" it to a single line of my web layout in order to only delete the selected line.
Can anyone please help and explain how to do it?
Thanks in advance for your help.
Best regards,
Francesco

Hi Francesco,
have never done this before using a delete function but for similar planning requirements. Just give it a try with this procedure:
At WAD you can set the behavior for each analysis item individually. If you set the "row selection" (analysis item, properties, web items parameters) for the rows to "single" or "multiple" the user can select rows (probably this is nothing new to you).
Just imagine you have the variable "product" in the row of your query. In this case just create a variable for this characteristic. In doing so you can use the variable within your delete function or within the planning filter belonging to this function for the characteristic "product". The last step is to "link" the characteritic value(s) of the selected rows to the planning function/filter. If you implement the planning fuction or the planning sequence in WAD you can do a data binding for the variable(s) as follows:
Variable: (name of your variable)
Variable type: Selection_binding_type
Binding type: item_characteristic
Web Item: (technical name of your selectable analysis item)
characteristic: (name of your characteristic)
Please keep us updated if it works, for questions just let us know.
Brgds,
Marcel

How to revert to diagnostics.wadcfg configuration from wad-control-container blob.

Hello all,
In our project at some point in the past we have enabled Diagnostics module for getting our log entries in Azure Storage. We added <Import moduleName="Diagnostics" /> to ServiceDefinition.csdef file and then enabled logs transfering and performance
counters gathering in WebRole.OnStart method via DiagnosticMonitor.Start():
DiagnosticMonitorConfiguration cfg = DiagnosticMonitor.GetDefaultInitialConfiguration();
cfg.OverallQuotaInMB = 8192;
cfg.Logs.ScheduledTransferLogLevelFilter = LogLevel.Verbose;
cfg.Logs.ScheduledTransferPeriod = TimeSpan.FromSeconds(30);
cfg.Logs.BufferQuotaInMB = 1000;
// Define performance counter configuration.
foreach (var counterName in PERFORMANCE_COUNTERS_NAMES)
PerformanceCounterConfiguration perfCounterConfiguration = new PerformanceCounterConfiguration();
perfCounterConfiguration.CounterSpecifier = counterName;
perfCounterConfiguration.SampleRate = TimeSpan.FromSeconds(5);
cfg.PerformanceCounters.DataSources.Add(perfCounterConfiguration);
cfg.PerformanceCounters.BufferQuotaInMB = 1024;
cfg.PerformanceCounters.ScheduledTransferPeriod = TimeSpan.FromMinutes(1);
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString", cfg);
Then using Windows Azure Management Portal we activated Verbose monitoring mode and added several additional performance counters there in order to try the feature. I assume that doing that through the portal we actually modified wad-control-container blob
so we got new performace counters configuration.
Later we've realized that it would be better to manage all diagnostic configuration in diagnostics.wadcfg. We removed the code from role start and added diagnostics.wadcfg file to the project that declares the same we did before via code. When we redeployed
we saw that the configuration remained as it was before - it didn't change at all. It still included new performance counters we added through the portal. It is because the order of precedence, where wad-control-container blob has the highest priority. So
we deleted all the blobs from wad-control-container in order to revert back to diagnostics.wadcfg and redeployed the service. New blob was created in wad-control-container. It included everything from diagnostics.wadcfg as we expected and
again we saw these custom performance counters we added via portal time ago. See below the blob content:
<?xml version="1.0"?>
<ConfigRequest xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DataSources>
<OverallQuotaInMB>8192</OverallQuotaInMB>
<Logs>
<BufferQuotaInMB>1024</BufferQuotaInMB>
<ScheduledTransferPeriodInMinutes>1</ScheduledTransferPeriodInMinutes>
<ScheduledTransferLogLevelFilter>Verbose</ScheduledTransferLogLevelFilter>
</Logs>
<DiagnosticInfrastructureLogs>
<BufferQuotaInMB>1024</BufferQuotaInMB>
<ScheduledTransferPeriodInMinutes>5</ScheduledTransferPeriodInMinutes>
<ScheduledTransferLogLevelFilter>Warning</ScheduledTransferLogLevelFilter>
</DiagnosticInfrastructureLogs>
<PerformanceCounters>
<BufferQuotaInMB>4096</BufferQuotaInMB>
<ScheduledTransferPeriodInMinutes>5</ScheduledTransferPeriodInMinutes>
<Subscriptions>
<PerformanceCounterConfiguration>
<CounterSpecifier>\Memory\Available Mbytes</CounterSpecifier>
<SampleRateInSeconds>10</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\Processor(_Total)\% Processor Time</CounterSpecifier>
<SampleRateInSeconds>10</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\ASP.NET Applications(__Total__)\Requests/Sec</CounterSpecifier>
<SampleRateInSeconds>5</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\ASP.NET Applications(__Total__)\Requests Executing</CounterSpecifier>
<SampleRateInSeconds>5</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\ASP.NET Applications(__Total__)\Requests In Application Queue</CounterSpecifier>
<SampleRateInSeconds>5</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\ASP.NET Applications(__Total__)\Requests Failed</CounterSpecifier>
<SampleRateInSeconds>30</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\ASP.NET Applications(__Total__)\Requests Timed Out</CounterSpecifier>
<SampleRateInSeconds>30</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\ASP.NET\Requests Rejected</CounterSpecifier>
<SampleRateInSeconds>30</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\ASP.NET\Worker Process Restarts</CounterSpecifier>
<SampleRateInSeconds>600</SampleRateInSeconds>
</PerformanceCounterConfiguration>

<PerformanceCounterConfiguration>
<CounterSpecifier>\Memory\Available MBytes</CounterSpecifier>
<SampleRateInSeconds>180</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\Web Service(_Total)\ISAPI Extension Requests/sec</CounterSpecifier>
<SampleRateInSeconds>180</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\Web Service(_Total)\Bytes Total/Sec</CounterSpecifier>
<SampleRateInSeconds>180</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\ASP.NET Applications(__Total__)\Errors Total/Sec</CounterSpecifier>
<SampleRateInSeconds>180</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\ASP.NET\Requests Queued</CounterSpecifier>
<SampleRateInSeconds>180</SampleRateInSeconds>
</PerformanceCounterConfiguration>

</Subscriptions>
</PerformanceCounters>
<WindowsEventLog>
<BufferQuotaInMB>0</BufferQuotaInMB>
<ScheduledTransferPeriodInMinutes>0</ScheduledTransferPeriodInMinutes>
<Subscriptions />
<ScheduledTransferLogLevelFilter>Undefined</ScheduledTransferLogLevelFilter>
</WindowsEventLog>
<Directories>
<BufferQuotaInMB>256</BufferQuotaInMB>
<ScheduledTransferPeriodInMinutes>5</ScheduledTransferPeriodInMinutes>
<Subscriptions>
<DirectoryConfiguration>
<Path>C:\Resources\directory\ac17d63416cf41c8acfebbbcb3d90052.Mbo.Services.Web.DiagnosticStore\CrashDumps</Path>
<Container>wad-crash-dumps</Container>
<DirectoryQuotaInMB>256</DirectoryQuotaInMB>
</DirectoryConfiguration>
</Subscriptions>
</Directories>
</DataSources>
<IsDefault>false</IsDefault> 
</ConfigRequest>
We tried to directly edit this XML. We removed redundant counters and changed IsDefault to "true" value in the XML and updated the blob in the wad-control-container using Azure Management Studio. Next time we redeployed the service - the counters
again appeared in the configuration and IsDefault reverted to false again.
Does anyone know how to permanently revert to managing diagnostics configuration only via diagnostics.wadcfg file and force the Azure to forget about manual edits we did via the portal?
We use Azure SDK 1.4.
Thanks in advance for any insights!
Vitaly

Hi Vitaly,
Did you try to change diagnostics configuration in VS? Like this:
I suggest you could click the "Edit", and select your diagnostics metrics. Also, I want you double check your re-deployment project whether is right. Please try it.
By the way, I suggest you could upgrade your SDK version and refer to this sample:
http://www.windowsazure.com/en-us/develop/net/common-tasks/performance-profiling/
http://msdn.microsoft.com/en-us/library/windowsazure/hh411542.aspx
Any question or result, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

WAD Question

Similar Messages

Maybe you are looking for