Wait for 30 seconds to execute the two functions
Dear Sir
I have a package in which two functions are written.Once the first function is executed I wanted the second function to wait for 30 seconds to execute the second functions.Could you please tell me how can I do it?
Regards
Go to $ORACLE_HOME/rdbms/admin and read the header:
-- DESCRIPTION
-- These routines allow the user to request, convert and release locks.Granting privileges on USER_LOCK is, at least according to the docs I've read, intended to limit the amount of damage a user with execute privs can do.
You can, of course, find SLEEP in four different Oracle packages:
* dbms_backup_restore
* dbms_drs
* dbms_lock
* user_lock -- note the granularity is different from dbms_lock and the othersI have documented all of them here:
http://www.morganslibrary.org/reference/sleep.html
I think people point those that ask questions to DBMS_LOCK only because it is the one best known.
Similar Messages
-
Error "The application could not execute the required function"
Hi All,
When I try to activate the DTP the following error occurs."the application could not execute the required function".
I was able to activate the DTP for the same DataSource 2 days back but now I am unable to activate .
Kindly suggest what could be the possible reason for the same.
Regards,
Santosh ManiIf you have transformation, check it is active. Is the object 0plant is acitve or not?
Ravi Thotahdri -
My machine has gone dead slow. I have to wait for minutes to perform every single function. Like it stopped typing four times during this question.
If this started happening without your having made any changes and without a warning of low disk space, then it's likely that the boot drive, or some other hardware component, is failing. Back up all data immediately, then run the Apple Hardware Test or Apple Diagnostics.
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly. -
PS has given up waiting for an assessment of the graphics display driver?
I replaced my graphics card because it was not supported and some PS CC graphics functionality (smart sharpening, etc) wouldnot operate. I purchased and installed a new Gigabyte AMD HD7770 as per the list of supported cards. The latest drivers have been installed. (Windows 7 64bit)
I am now getting a message "PS has given up waiting for an assessment of the graphics display driver. Enhancements that use the graphics hardware have been disabled. Check the manufacturer's website site for the latest software."
What is happening? Why am I paying for features that I cannot access despite having gone to the expense of purchasing a new card and following the PS CC requirements to the letter?
This is very frustrating and annoying.
Addendum: I am now getting a message that 3D requires a minimium of 512Mb of vRAM. However, my new card is 1 GB......?????????
Can someone provide a solution for this problem please?The best thing to do is to go into Help > System Info, copy and paste the contents into your reply.
One of us or several should be able to sort it out for you.
Gene -
My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!
Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?
-
Lion in the app store I bought, now he is waiting for 12 hours in the dock on
lion in the app store I bought, now he is waiting for 12 hours in the dock on is this normal?
Go to appstore > purchases > does it say install?
If so, go install it
Enjoy! -
i have snow leopard, 10.6.8 on my mac pro. would it make sense to wait for mountain lion in the summer vice upgrading to Lion then mountaion lion?
Nobody can tell you that. We don't yet know what the pricing will be or what kind of compatibility issues may arise. If you don't need anything in Lion right now, you can certainly wait, and if you do find the features of Lion compelling, there's no reason to wait for 6 months. Buy what you need when you need it, and don't worry so much about what's ahead... there's always something new coming soon!
-
How LONG I'll need to wait for Apple GENIUS fix the incompatibility
I need to work....How LONG I'll need to wait for Apple GENIUS fix the incompatibility # KEYNOTE and LION???
What is the best thing I've to do???
Downgrade the OS??? Change the Plataform????Each region has little differences that need to be changed and setup in order for it to work on your phone correctly. Just need to sit and wait...
Nokia 5800 XpressMusic Red V52.0.007
Hit the Kudos if I helped! -
unable to pair my iphone 4s to my mac using bluetooth been to apple store who have told me there is a clitch and to wait for undates to cure the problem ?
I have my iPhone 4S paired with my macbook retina, so hexonxonx's reply is incorrect.
After you pair your phone and your computer, go into network preferences on your computer. Click the bluetooth pan, check that you see your phone and click connect.
That worked for me.
If I click connect from the phone it tells me that my retina mbp isn't compatible and it forces me to forget this device. If this happens just repair it...
Good luck -
my iphone5 is stuck at the i tunes logo whenever i try to restore it the iphone reboots at the waiting for iphone stage and the i tunes logo appears againe
Water damage is really a tough hurdle to get over if the steps you have already tried do not work.
The next step would be to tranfer your Logic Board to a working 3GS to see if it works.
If the Logic Board is good or you just want to try one more thing, try cleaning the Dock Port very well with Isopropyll Alcohol. If still problem, at most replace the Dock Port Assembly.
Throwing good money after a bad iPhone is not a good idea. -
CCP related: A timeout occured waiting for a response from the ECU
Hello All,
I had just started using ECU Calibration tool kit software. Iam using USB 8473 for my application.When I tried to run the VI after loading the *.A2L file, I see an error message saying "A timeout occured waiting for a response from the ECU ". Does anyone know how to communicate with the ECU through CCP.
Iam pretty sure that Iam using the right cable. I also checked the address of the parameters using Get property.vi what iam trying to read, wether they are matching with the address in the *.A2L file or not.They are matching. However I was able to communicate with my ECU when I use the same device to read the data over J1939 data link, based on arbitration ID's, with the Vi's from CAN Frame to Channel Conversion Library.
Can any pls help me out how to communicate with my ECU using CAN Calibration Toolkit software.
-Lucky.Hello,
I am sending you an attachment of the manual for the ECU Calibration tool kit . Please go through the manual it will clarify your doubt. Moreover , check for can vi's in the example finder in labVIEW. Those will help ....
I am sending you a link which gives you some insight about the installation of CCP command set and the use of the toolkit with the USB CAN hardware.
http://digital.ni.com/softlib.nsf/websearch/D7DE248D07CAD00086256ED3004BAB8A?opendocument&node=13206...
Drivers and Updates: ECU Measurement and Calibration Toolkit 2.1
Attachments:
can manual.pdf 1437 KB -
My ipod touch wouln't turn on because I dropped it, so I plugged it into the computer. It went into recovery mode and is now stuck on a waiting for ipod screen. The ipod shows the apple logo and and an empty loading bar. Please help. Thank you.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
DNS is waiting for AD to signal the initial replication has completed
Hello,
First off, thank you for your help in advanced. Any help you can offer would be appreciated, and let me know if there's more information you need
me to provide, or utilities to run.
I have just joined a Server 2012 R2 DC to my Server 2008 R2 domain. Topology is it only had one DC previously, the 2008 R2, running AD/DNS/DHCP.
I ran the forest prep & domain prep on the 2008 R2 domain controller, then ran a dcpromo on the 2012 R2. From there, I migrated the FSMO roles over to the 2012 R2 server using ntdsutil.exe. The ultimate goal is to retire the 2008 R2 DC and
bring on line a 2nd 2012 R2 DC for this domain.
My Issues
Windows 7 client PC's do not always resolve/pass traffic to the Server 2012 R2 server, sometimes I need to ping
the server by IP before it will resolve, other times if I just repeatedly double click on the shared folder mapped to the Server 2012 R2 DC it will work eventually. This is intermittent/random,
and not always repeatable with any specific procedures. Sometimes the user will be working, then all of the sudden they can't resolve DNS to the internet, nor internally.
I am getting the following errors in the event log on my 2012 R2 DC
Log Name: DNS Server
Source: Microsoft-Windows-DNS-Server-Service
Date: 3/16/2014 8:02:34 PM
Event ID: 4013
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: HSSserver.carman.local
Description:
The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start
until the initial synchronization is complete because critical DNS data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there
is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet Protocol properties of this computer. This event will
be logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.
Log Name: Directory Service
Source: Microsoft-Windows-ActiveDirectory_DomainService
Date: 3/16/2014 8:56:17 PM
Event ID: 2092
Task Category: Replication
Level: Warning
Keywords: Classic
User: ANONYMOUS LOGON
Computer: HSSserver.carman.local
Description:
This server is the owner of the following FSMO role, but does not consider it valid. For the partition which contains the FSMO, this server has
not replicated successfully with any of its partners since this server has been restarted. Replication errors are preventing validation of this role.
Operations which require contacting a FSMO operation master will fail until this condition is corrected.
FSMO Role: CN=Partitions,CN=Configuration,DC=carman,DC=local
User Action:
1. Initial synchronization is the first early replications done by a system as it is starting. A failure to initially synchronize may explain why a FSMO role cannot be validated. This process is explained in KB article 305476.
2. This server has one or more replication partners, and replication is failing for all of these partners. Use the command repadmin /showrepl to display the replication errors. Correct the error in question. For example there maybe problems with IP connectivity,
DNS name resolution, or security authentication that are preventing successful replication.
3. In the rare event that all replication partners are expected to be offline (for example, because of maintenance or disaster recovery), you can force the role to be validated. This can be done by using NTDSUTIL.EXE to seize the role to the same server. This
may be done using the steps provided in KB articles 255504 and 324801 on.
The following operations may be impacted:
Schema: You will no longer be able to modify the schema for this forest.
Domain Naming: You will no longer be able to add or remove domains from this forest.
PDC: You will no longer be able to perform primary domain controller operations, such as Group Policy updates and password resets for non-Active Directory Domain Services accounts.
RID: You will not be able to allocation new security identifiers for new user accounts, computer accounts or security groups.
Infrastructure: Cross-domain name references, such as universal group memberships, will not be updated properly if their target object is moved or renamed.
Log Name: Directory Service
Source: Microsoft-Windows-ActiveDirectory_DomainService
Date: 3/16/2014 8:56:17 PM
Event ID: 2092
Task Category: Replication
Level: Warning
Keywords: Classic
User: ANONYMOUS LOGON
Computer: HSSserver.carman.local
Description:
This server is the owner of the following FSMO role, but does not consider it valid. For the partition which contains the FSMO, this server has
not replicated successfully with any of its partners since this server has been restarted. Replication errors are preventing validation of this role.
Operations which require contacting a FSMO operation master will fail until this condition is corrected.
FSMO Role: CN=Schema,CN=Configuration,DC=carman,DC=local
User Action:
1. Initial synchronization is the first early replications done by a system as it is starting. A failure to initially synchronize may explain why a FSMO role cannot be validated. This process is explained in KB article 305476.
2. This server has one or more replication partners, and replication is failing for all of these partners. Use the command repadmin /showrepl to display the replication errors. Correct the error in question. For example there maybe problems with IP connectivity,
DNS name resolution, or security authentication that are preventing successful replication.
3. In the rare event that all replication partners are expected to be offline (for example, because of maintenance or disaster recovery), you can force the role to be validated. This can be done by using NTDSUTIL.EXE to seize the role to the same server. This
may be done using the steps provided in KB articles 255504 and 324801 on
The following operations may be impacted:
Schema: You will no longer be able to modify the schema for this forest.
Domain Naming: You will no longer be able to add or remove domains from this forest.
PDC: You will no longer be able to perform primary domain controller operations, such as Group Policy updates and password resets for non-Active Directory Domain Services accounts.
RID: You will not be able to allocation new security identifiers for new user accounts, computer accounts or security groups.
Infrastructure: Cross-domain name references, such as universal group memberships, will not be updated properly if their target object is moved or renamed.
Log Name: DFS Replication
Source: DFSR
Date: 3/16/2014 11:21:43 PM
Event ID: 5014
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: HSSserver.carman.local
Description:
The DFS Replication service is stopping communication with partner CARMANSERVER for replication group Domain System Volume due to an error. The service will retry the connection periodically.
Additional Information:
Error: 1726 (The remote procedure call failed.)
Connection ID: 020D5B10-4876-4888-9214-45E3D8B3206D
Replication Group ID: 8A8ADB84-CB25-495E-8C28-AE9FD1761E85
From the Server 2008 R2 DC, I get the following errors/warnings in my event log:
Log Name: Directory Service
Source: Microsoft-Windows-ActiveDirectory_DomainService
Date: 3/16/2014 8:02:45 PM
Event ID: 2088
Task Category: DS RPC Client
Level: Warning
Keywords: Classic
User: ANONYMOUS LOGON
Computer: CARMANSERVER.carman.local
Description:
Active Directory Domain Services could not use DNS to resolve the IP address of the source domain controller listed below. To maintain the consistency of Security groups, group policy,
users and computers and their passwords, Active Directory Domain Services successfully replicated using the NetBIOS or fully qualified computer name of the source domain controller.
Invalid DNS configuration may be affecting other essential operations on member computers, domain controllers or application servers in this Active Directory Domain Services forest,
including logon authentication or access to network resources.
You should immediately resolve this DNS configuration error so that this domain controller can resolve the IP address of the source domain controller using DNS.
Alternate server name:
HSSserver.carman.local
Failing DNS host name:
25346b74-2fc2-4311-a54d-d500669d4026._msdcs.carman.local
NOTE: By default, only up to 10 DNS failures are shown for any given 12 hour period, even if more than 10 failures occur. To log all individual failure events, set the following
diagnostics registry value to 1:
Registry Path:
HKLM\System\CurrentControlSet\Services\NTDS\Diagnostics\22 DS RPC Client
User Action:
1) If the source domain controller is no longer functioning or its operating system has been reinstalled with a different computer name or NTDSDSA object GUID, remove the source
domain controller's metadata with ntdsutil.exe, using the steps outlined in MSKB article 216498.
2) Confirm that the source domain controller is running Active Directory Domain Services and is accessible on the network by typing "net view <DC
name>" or "ping <source DC name>".
3) Verify that the source domain controller is using a valid DNS server for DNS services, and that the source domain controller's host record and CNAME record are correctly registered,
using the DNS Enhanced version of DCDIAG.EXE available on
dcdiag /test:dns
4) Verify that this destination domain controller is using a valid DNS server for DNS services, by running the DNS Enhanced version of DCDIAG.EXE command on the console of the
destination domain controller, as follows:
dcdiag /test:dns
5) For further analysis of DNS error failures see KB 824449:
Additional Data
Error value:
11004 The requested name is valid, but no data of the requested type was found.
Log Name: DNS Server
Source: Microsoft-Windows-DNS-Server-Service
Date: 3/16/2014 8:02:19 PM
Event ID: 4013
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: CARMANSERVER.carman.local
Description:
The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start
until the initial synchronization is complete because critical DNS data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there
is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet Protocol properties of this computer. This event will be
logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.
Log Name: System
Source: Microsoft-Windows-DNS-Client
Date: 3/16/2014 8:01:55 PM
Event ID: 1014
Task Category: None
Level: Warning
Keywords:
User: NETWORK SERVICE
Computer: CARMANSERVER.carman.local
Description:
Name resolution for the name _ldap._tcp.dc._msdcs.carman.local timed out after none of the configured DNS servers responded.
Log Name: System
Source: NETLOGON
Date: 3/16/2014 8:02:07 PM
Event ID: 3096
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: CARMANSERVER.carman.local
Description:
The primary Domain Controller for this domain could not be located.
Log Name: System
Source: Microsoft-Windows-WinRM
Date: 3/16/2014 8:05:08 PM
Event ID: 10154
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: CARMANSERVER.carman.local
Description:
The WinRM service failed to create the following SPNs: WSMAN/CARMANSERVER.carman.local; WSMAN/CARMANSERVER.
Additional Data
The error received was 8344: %%8344.
User Action
The SPNs can be created by an administrator using setspn.exe utility.
Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 3/16/2014 10:50:55 PM
Event ID: 10009
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: CARMANSERVER.carman.local
Description:
DCOM was unable to communicate with the computer 208.67.222.222 using any of the configured protocolsSorry, the forum limited me to only 60000 characters per post, so here is some more detailed information:
Here's some initial diags/info from my server 2012 DC:
c:\windows\system32\dcdiag /test:DNS /v /e
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine HSSserver, is a Directory Server.
Home Server = HSSserver
* Connecting to directory service on server HSSserver.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=carman,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=carman,DC=local
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=carman,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=CARMANSERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=carman,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=HSSSERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=carman,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 2 DC(s). Testing 2 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\CARMANSERVER
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
The clock difference between the home server HSSSERVER and target
server CARMANSERVER is greater than one minute. This may cause
Kerberos authentication failures. Please check that the time service
is working properly. You may need to resynchonize the time between
these servers.
......................... CARMANSERVER passed test Connectivity
Testing server: Default-First-Site-Name\HSSSERVER
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... HSSSERVER passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\CARMANSERVER
Test omitted by user request: Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Test omitted by user request: FrsEvent
Test omitted by user request: DFSREvent
Test omitted by user request: SysVolCheck
Test omitted by user request: KccEvent
Test omitted by user request: KnowsOfRoleHolders
Test omitted by user request: MachineAccount
Test omitted by user request: NCSecDesc
Test omitted by user request: NetLogons
Test omitted by user request: ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Test omitted by user request: Replications
Test omitted by user request: RidManager
Test omitted by user request: Services
Test omitted by user request: SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Test omitted by user request: VerifyReferences
Test omitted by user request: VerifyReplicas
Testing server: Default-First-Site-Name\HSSSERVER
Test omitted by user request: Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Test omitted by user request: FrsEvent
Test omitted by user request: DFSREvent
Test omitted by user request: SysVolCheck
Test omitted by user request: KccEvent
Test omitted by user request: KnowsOfRoleHolders
Test omitted by user request: MachineAccount
Test omitted by user request: NCSecDesc
Test omitted by user request: NetLogons
Test omitted by user request: ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Test omitted by user request: Replications
Test omitted by user request: RidManager
Test omitted by user request: Services
Test omitted by user request: SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Test omitted by user request: VerifyReferences
Test omitted by user request: VerifyReplicas
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
Starting test: DNS
See DNS test in enterprise tests section
for results
......................... HSSSERVER passed test DNS
See DNS test in enterprise tests section for results
......................... CARMANSERVER passed test DNS
Running partition tests on : ForestDnsZones
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : DomainDnsZones
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : Schema
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : Configuration
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : carman
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running enterprise tests on : carman.local
Starting test: DNS
Test results for domain controllers:
DC: HSSserver.carman.local
Domain: carman.local
TEST: Authentication (Auth)
Authentication test: Successfully completed
TEST: Basic (Basc)
The OS
Microsoft Windows Server 2012 R2 Standard
(Service Pack level: 0.0)
is supported.
NETLOGON service is running
kdc service is running
DNSCACHE service is running
DNS service is running
DC is a DNS server
Network adapters information:
Adapter [00000010] Broadcom NetXtreme Gigabit
Ethernet:
MAC address is F0:1F:AF:E1:D1:C4
IP Address is static
IP address: 192.168.17.7, fe80::35d3:8713:ce0a:3680
DNS servers:
192.168.17.7
(HSSSERVER) [Valid]
192.168.17.5 (carmanserver.carman.local.) [Valid]
The A host record(s) for this DC was found
The SOA record for the Active Directory zone was found
The Active Directory zone on this DC/DNS server was found primary
Root zone on this DC/DNS server was not found
TEST: Forwarders/Root hints (Forw)
Recursion is enabled
Forwarders Information:
208.67.220.220 (<name unavailable>) [Valid]
208.67.222.222 (<name unavailable>) [Valid]
TEST: Delegations (Del)
Delegation information for the zone: carman.local.
Delegated domain name: _msdcs.carman.local.
DNS server: carmanserver.carman.local. IP:192.168.17.5 [Valid]
TEST: Dynamic update (Dyn)
Test record dcdiag-test-record added successfully in zone carman.local
Test record dcdiag-test-record deleted successfully in zone carman.local
TEST: Records registration (RReg)
Network Adapter
[00000010] Broadcom NetXtreme Gigabit Ethernet:
Matching CNAME record
found at DNS server 192.168.17.7:
25346b74-2fc2-4311-a54d-d500669d4026._msdcs.carman.local
Matching A record found
at DNS server 192.168.17.7:
HSSserver.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_ldap._tcp.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_ldap._tcp.e6c304e4-c161-4258-8d51-5a2f20a61c7a.domains._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_kerberos._tcp.dc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_ldap._tcp.dc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_kerberos._tcp.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_kerberos._udp.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_kpasswd._tcp.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_ldap._tcp.Default-First-Site-Name._sites.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_kerberos._tcp.Default-First-Site-Name._sites.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_ldap._tcp.gc._msdcs.carman.local
Matching A record found
at DNS server 192.168.17.7:
gc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_gc._tcp.Default-First-Site-Name._sites.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_ldap._tcp.pdc._msdcs.carman.local
Matching CNAME record
found at DNS server 192.168.17.5:
25346b74-2fc2-4311-a54d-d500669d4026._msdcs.carman.local
Matching A record found
at DNS server 192.168.17.5:
HSSserver.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_ldap._tcp.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_ldap._tcp.e6c304e4-c161-4258-8d51-5a2f20a61c7a.domains._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_kerberos._tcp.dc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_ldap._tcp.dc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_kerberos._tcp.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_kerberos._udp.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_kpasswd._tcp.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_ldap._tcp.Default-First-Site-Name._sites.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_kerberos._tcp.Default-First-Site-Name._sites.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_ldap._tcp.gc._msdcs.carman.local
Matching A record found
at DNS server 192.168.17.5:
gc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_gc._tcp.Default-First-Site-Name._sites.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_ldap._tcp.pdc._msdcs.carman.local
DC: CARMANSERVER.carman.local
Domain: carman.local
TEST: Authentication (Auth)
Authentication test: Successfully completed
TEST: Basic (Basc)
The OS
Microsoft Windows Server 2008 R2 Standard
(Service Pack level: 1.0)
is supported.
NETLOGON service is running
kdc service is running
DNSCACHE service is running
DNS service is running
DC is a DNS server
Network adapters information:
Adapter
[00000007] Broadcom BCM5716C NetXtreme II
GigE (NDIS VBD Client):
MAC address is A4:BA:DB:12:D1:77
IP Address is static
IP address: 192.168.17.5
DNS servers:
127.0.0.1
(carmanserver.carman.local.) [Valid]
192.168.17.7 (HSSSERVER) [Valid]
The A host record(s) for this DC was found
The SOA record for the Active Directory zone was found
The Active Directory zone on this DC/DNS server was found primary
Root zone on this DC/DNS server was not found
TEST: Forwarders/Root hints (Forw)
Recursion is enabled
Forwarders Information:
208.67.220.220 (<name unavailable>) [Valid]
208.67.222.222 (<name unavailable>) [Valid]
TEST: Delegations (Del)
Delegation information for the zone: carman.local.
Delegated domain name: _msdcs.carman.local.
DNS server: carmanserver.carman.local. IP:192.168.17.5 [Valid]
TEST: Dynamic update (Dyn)
Test record dcdiag-test-record added successfully in zone carman.local
Test record dcdiag-test-record deleted successfully in zone carman.local
TEST: Records registration (RReg)
Network Adapter
[00000007] Broadcom BCM5716C NetXtreme II
GigE (NDIS VBD Client): -
Application waits for a responce from the DB ...
Hi friends,
I have a multi threaded .NET application that interacts with ORACLE 10g DB.
When the multi thread is executing for less than 4hrs continuously there is no problem, but if it continuous execution for more than 5hrs the application doesn't respond.
To track the problem i have followed the standard logging process i.e. to a file. When i analyzed the file i could see the application sending a request to the DB and waits for the reply, but the server doesn't reply.
One thing to be looked in is that the same piece of code was execution for 5hrs.
I have no idea of this behavior, some one please help me out ...Hi Pierre Forstmann,
I am not a ORACLE DBA expert but managed to get some information,
Error message in database alert log file.
Alert_<DB_NAME>.log
ORA-1654: unable to extend index SYSMAN.MGMT_SYSTEM_PERF_LOG_IDX_01 by 8 in tablespace SYSAUX
There are no queries waiting on DBA_WAITERS or DBA_BLOCKERS.
The application is executing PL/SQL statement (Procedure, Functions).
Four tables are related to this process.
Initial Count
T1 - 0 Records
T2 - 0 Records
T3 - 0 Records
T4 - 0 Records
Count after 4-5 hrs of execution
T1 - 38269 Records
T2 - 654818 Records
T3 - 992579 Records
T4 - 4422 Records
I have identified the session that is used by my code from V$SESSION.
Initially when i issued the below select statement:
SELECT status,state,wait_time,seconds_in_wait FROM V$SESSION WHERE USERNAME = 'XXX';
STATUS;STATE;WAIT_TIME;SECONDS_IN_WAIT
INACTIVE;WAITING;0;1377
ACTIVE;WAITED SHORT TIME;-1;2
ACTIVE;WAITED SHORT TIME;-1;0
INACTIVE;WAITING;0;1
INACTIVE;WAITING;0;1377
INACTIVE;WAITING;0;1377
INACTIVE;WAITING;0;1377
INACTIVE;WAITING;0;1377
INACTIVE;WAITING;0;4
INACTIVE;WAITING;0;1377
Yes, The data in V$SESSION changes over time.
After 5 Min interval
INACTIVE;WAITING;0;1496
ACTIVE;WAITED SHORT TIME;-1;2
ACTIVE;WAITED SHORT TIME;-1;5
INACTIVE;WAITING;0;2
INACTIVE;WAITING;0;1496
INACTIVE;WAITING;0;1496
INACTIVE;WAITING;0;1496
INACTIVE;WAITING;0;1496
INACTIVE;WAITING;0;0
INACTIVE;WAITING;0;1496
After 2 Min interval
INACTIVE;WAITING;0;1452
INACTIVE;WAITING;0;0
INACTIVE;WAITING;0;0
INACTIVE;WAITING;0;0
INACTIVE;WAITING;0;1452
INACTIVE;WAITING;0;1452
INACTIVE;WAITING;0;1452
INACTIVE;WAITING;0;1452
INACTIVE;WAITING;0;5
INACTIVE;WAITING;0;1452
After 1 Min interval
INACTIVE;WAITING;0;1751
ACTIVE;WAITED KNOWN TIME;2;0
ACTIVE;WAITED KNOWN TIME;1;1
INACTIVE;WAITING;0;7
INACTIVE;WAITING;0;1751
INACTIVE;WAITING;0;1751
INACTIVE;WAITING;0;1751
INACTIVE;WAITING;0;1751
INACTIVE;WAITING;0;1
INACTIVE;WAITING;0;1751
After 4-5 hrs of execution and when the application was waiting for the reply from the DB server i issued the same select statement.
Result is : No rows returned.
I would like to know what would be the reason that all the 10 session have disappeared from V$SESSION. -
WORKFLOW PROCESS IS NOT WAITING FOR USER INPUT LIKE RE-ASSIGN FUNCTION
I am using Stand alone Workflow 2.6, In my workflow process
which is an Issue tracking system which is working fine. On Enhancement I would like to create my own RE-ASSIGN function which will, Change the ownership of an issue totally to other user.
For this I Created a package(CHANGE_OWNER.CREATE)which will show list of Users and Comment field(Just like Re-Assign).
Here user can pick other user, and add comment,
once submit for that Item key I am updating the workflow notification table so that paritcular issue ownership will be changed.
In my workflow process I created a lookup code called "Change Owner". On click of Change Owner it will call the Function
in workflow process which will call CHANGE_OWNER.CREATE, here
the workflow process supposed to wait and get the User to be
changed. BUT THE PROCESS IS NOT WAITING, IT JUST DISPLAYED THE
SCREEN AND CONTINUED THE WORKFLOW PROCESS. I WANT THE MY
WORKFLOW PROCESS TO BE ACT AS RE-ASSINGN BUTTON WHICH WILL WAIT
FOR THE USER INPUT.
HOW TO DO IT.
Thanks
Bala.Hi Bala
What enhancements were you adding to the Workflow Reassign/Delegate feature, which included being able to add comments? A good idea is to look for any differences between how workflow implements the reassign feature, and your customization.
Also, make sure you only use the Public documented PL/SQL APIs and do not update the tables directly to ensure no Support or Upgrade Issues.
Cheers
Mark
I am using Stand alone Workflow 2.6, In my workflow process
which is an Issue tracking system which is working fine. On Enhancement I would like to create my own RE-ASSIGN function which will, Change the ownership of an issue totally to other user.
For this I Created a package(CHANGE_OWNER.CREATE)which will show list of Users and Comment field(Just like Re-Assign).
Here user can pick other user, and add comment,
once submit for that Item key I am updating the workflow notification table so that paritcular issue ownership will be changed.
In my workflow process I created a lookup code called "Change Owner". On click of Change Owner it will call the Function
in workflow process which will call CHANGE_OWNER.CREATE, here
the workflow process supposed to wait and get the User to be
changed. BUT THE PROCESS IS NOT WAITING, IT JUST DISPLAYED THE
SCREEN AND CONTINUED THE WORKFLOW PROCESS. I WANT THE MY
WORKFLOW PROCESS TO BE ACT AS RE-ASSINGN BUTTON WHICH WILL WAIT
FOR THE USER INPUT.
HOW TO DO IT.
Thanks
Bala.
Maybe you are looking for
-
Printing is offset in weird way
I have a file that has a 1.5"h x 3.5"w box in the very top left hand corner (0,0). I understand that my printer will not allow me to print to the very edge of the document so this is not a bleed question (or at least I don't think it is). Here's the
-
HELP!!!! nano won't display my album artwork!!!
I just got my nano yesterday, and i decided to put a few album artwork on it, everything worked out pertty well, i went into itunes to to enable artwork display for my nano, and then i applied the artworks onto some songs, but when i play the music o
-
When it will be the camera raw update for the nikon d750 in Lightroom 4?
When it will be the camera raw update for the nikon d750 in Lightroom 4?
-
Foriegn currency selling rate to maintain in document header
Hi I want to maintain the selling rate of my foriegn currency in my document header item and system shoucl capture the exchange rate gain or loss posting in line item Thanks & Regards
-
WebLogic 12.1.1 Message Bridge to WebLogic 10.3.5
I'm trying to create a bridge from wls 12.1.1 to a topic on wls 10.3.5. The resulting target of the bridge is a queue on wls 12.1.1. However, when the 12.1.1 server is started, it ends up printing the following: <Dec 11, 2012 4:19:35 PM MST> <Warning