Wait_time.v$session_active_history, any interest or benefic usage ?

Hello all,
All in the title.
I use always time_waited.v$session_active_history to understand why our sessions are waiting.
But, what is the utility of wait_time column ?
I understand that it gives the time waited for the last event, but how this information can be usefull or interesting for a DBA ?
Thanks in advance

I don't think so. And i don't know if i am wrong.
Wait_time= total of last wait in microseconds when session_state="waiting", otherwise "0".
Time_waited = time of wait in progress when session_status="waiting", otherwise "0".
(First Wait_time when session_state=ON CPU )= sum(of all previous time_waited related to the last event)
So, we cannot add time_waited and wait_time to do anythings.
Am i wrong ?

Similar Messages

Any interest in daily built e17 cvs snapshots?

Hi i have created a system for myself in which i build, mostly daily, a bleeding edge version of e17. I do not wish to compete with the rensel repository, I only want to find out if there is any interest, as i build them anyway for private use. If there is enough interest i can create an unofficial repository.
btw I create the following packages:
ecore-CVS_20050326-1.pkg.tar.gz
epeg-CVS_20050326-1.pkg.tar.gz
e-CVS_20050326-1.pkg.tar.gz
epsilon-CVS_20050326-1.pkg.tar.gz
edb-CVS_20050326-1.pkg.tar.gz
erss-CVS_20050326-1.pkg.tar.gz
edje-CVS_20050326-1.pkg.tar.gz
esmart-CVS_20050326-1.pkg.tar.gz
eet-CVS_20050326-1.pkg.tar.gz
etox-CVS_20050326-1.pkg.tar.gz
elicit-CVS_20050326-1.pkg.tar.gz
e_utils-CVS_20050326-1.pkg.tar.gz
embryo-CVS_20050326-1.pkg.tar.gz
evas-CVS_20050326-1.pkg.tar.gz
emotion-CVS_20050326-1.pkg.tar.gz
evidence-CVS_20050326-1.pkg.tar.gz
engage-CVS_20050326-1.pkg.tar.gz
ewl-CVS_20050326-1.pkg.tar.gz
engrave-CVS_20050326-1.pkg.tar.gz
examine-CVS_20050326-1.pkg.tar.gz
entice-CVS_20050326-1.pkg.tar.gz
iconbar-CVS_20050326-1.pkg.tar.gz
entrance-CVS_20050326-1.pkg.tar.gz
imlib2-CVS_20050326-1.pkg.tar.gz
envision-CVS_20050326-1.pkg.tar.gz
imlib2_loaders-CVS_20050326-1.pkg.tar.gz
Best regards Nick.

cdk wrote:
WOW ..... e17 rocks. i just tried it out! its flipping sweet m8s! i havent spent much time in it but is it very usable. i dont mean it has to be super stable but is is usable enough for everyday?
cheers,
cdk
Yes it is usable, though it seems to crash now and then sometimes, I've ran it without any problem for several days. Also keep an eye on http://lude.net/edocs/, the unofficial documentation. It is usually quite up to date.
The only disturbing thing about e17 is that there are almost no eapp files included by default.
perhaps I should include some additional eapp files in my builds and extend the menu a bit. Another thing you should try is load engage instead of ibar, as it is a wonderfull dockapp and a lot more.
For that do the following, all steps only required once:
load the engage module:
open a terminal and run /opt/e17/bin/enlightenment_remote -module-load /opt/e17/lib/engage/module.so
then disable ibar:
left click on the desktop | modules | ibar | toggle enable
populate ~/.e/e/application/engage/.order with for example
[nick@Nick ~]$ cat .e/e/applications/engage/.order
kontact.eapp
azureus.eapp
gimp.eapp
firefox.eapp
enterminus.eapp
xmms.eapp
evidence.eapp
konqueror.eapp
pan.eapp
gtick.eapp
all eapp files should be in ~/.e/e/applications/all/ and can be made using e_util_eapp_edit from the e_util package.
After that enable engage in the same way as you disabled ibar:
left click on the desktop | modules | engage | toggle enable
You can create a wallpaper with e17setroot, it will set it as a background after it creates it, and it stores your background file somewhere in your ~/.e tree. After that you can use emblem to switch/choose any wallpaper you created in that way.
except for the engage module you can load several others too, they can be found in /opt/e17/lib/enlightenment/modules and most aren't loaded by default. if a module is not loaded it will not be listed in the e17 menu.
Hope this helps a lot of people
EDIT:
I added the icons suggested on http://aje.codewordt.co.uk/ from one of the devs of e17. I do not know if you have to delete your ~/.e before they are picked up, anyway just reinstall e for it to work.

Any interest in a medical repo?

Hi all,
As a med student with an interest in linux I was wondering if there was any interest in a medical repo? I have made a few packages for personal use, mostly DICOM viewers and libraries, one of which is in AUR and the rest of which will follow soon. There is quite a lot of open source medical stuff though, and I know there is a medical repository for debian, so if there was interest I could package these too.
I have hosting that should give me enough bandwidth (unless there are more arch-using medics out there than I thought:)). Let me know what you think.
Stewart

Quite old when looking at the dates but I think I'm interested in it.
I'm a radiologist and quite like things working. The distro of my choice is arch, unfortunately the amounts of working dicom viewers is approaching zero.
Besides I like the simple workflow of Arch I'm forced to use three different OS at the moment. (Arch, Win7 and MacOS).
Standard is Arch, Win7 for scientific papers..thanks to endnote. And the MacOS with OsiriX as DICOM viewer.
In some harsh words: That sucks alot!
Besides there are good programs in my Arch world like the DICOM viewer ginkgo-cadx https://aur.archlinux.org/packages.php?ID=47365 or the citation managers zotero https://aur.archlinux.org/packages.php?ID=46784 / mendeley https://aur.archlinux.org/packages.php?ID=44071
I think other programs like GNUmed or maybe aeskulap and many more are also helpful for your daily workflow.
The problem as a doctor is you need things just working everytime and anywhere and for me I'm just to stupid to build and fix things myself.
I've tried though but I failed so far. For these cases I need alot assistance.
So if we could form a team, help each other out and could assure PKBUILD files in the AUR work out of the box I would be totally in. I don't think we need a medical repo. AUR is working quite well.
Anyone else?

Any interest in a repo of cross-compilers?

I recently had to make a couple of cross-compilers for a project that I was working on and wondered if there was any interest in a repo for cross-compilers?
These are compilers that I know I can easily build (target triplet in brackets)
linux-32bit:
arm (arm-none-linux-gnueabi)
ppc (powerpc-unknown-linux-gnu)
mips (mips-unknown-linux-gnu / mipsel-unknown-linux-gnu)
sparc (sparc-unknown-linux-gnu)
linux-64 bit:
alpha (alpha-unknown-linux-gnu)
mips64 (mips64-unknown-linux-gnu / mips64el-unknown-linux-gnu)
sparc64 (sparc64-unknown-linux-gnu)
ppc64 (powerpc64-unknown-linux-gnu)
hppa (hppa-unknown-linux-gnu) [probably...]
other:
windows (i686-pc-mingw32)
And some that I think can be done and would be quite interesting...
bsd (i686-pc-kfreebsd-gnu) - the start to the often suggested ArchBSD maybe...
hurd (i686-pc-gnu) - ArchHURD anyone? I didn't think so!
So, would these be useful for anyone and are there any other architectures people would like?
For those that are interested, my mingw32 compiler PKGBUILDs are here. They are quite different to those in the [community] repo...

I'll be doing lots of stuff with arm since I'm starting to make some homebrew apps for nds.
But I'm already using:
pkg: cross-arm-elf-binutils
pkg: cross-arm-elf-gcc-base

Another Kernel pkg: any interest?

Hey guys, I am just trying to see if there is any interest for yet another kernel set for arch.
Basically, I had gotten in the habit of building my own kernel package (called neotweek) since about 2.6.19 based on a patchset that was a modification of kamikazee that centred around the ck patches and scheduler. I stopped working neotweek when CK stopped developing for the linux kernel; but I was wondering if people would be interested in a legacy pkg build of this particular kernel. Here is the broken-out patch list.
2.6.22-sd-1.0-boost.patch
2.6.22-sd-1.0-boost-tunable.patch
acpi-buggy-bios.patch
acpi-dsdt-initrd-v0.8.4-2.6.22.patch
ahci-link-power-management-2.6.22.patch
alsa-cvs-20070721-2.6.22.patch
atapi-asynchronous-notification-2.6.22.patch
aufs-cvs-071807-2.6.22.patch
centrino_undervolt.patch
cpu-support-rollup-2.6.22.patch
enable-4k-stacks-default-2.6.22.patch
ene-cardreader-support-2.6.22.patch
ext4-updates-2.6.22.patch
genpatches-2.6.22-2.patch
gspca-20070508-2.6.22.patch
hrtimers-2.6.22-1.patch
hz-864-kconfig-option.patch
ipw2100.patch
ipw2200-1.2.2-2.6.22.patch
ipw3945-1.2.1-2.6.22.patch
iwlwifi-0.1.2-2.6.22.patch
linux-phc-0.3.0-pre1-2.6.22.patch
mactel-patches-2.6.22-1.patch
neotweek-version.patch
patch-2.6.22.1
patch-2.6.22-ck1
powertop-2.6.22.patch
realtime-lsm-2.6.22.patch
reiser4-2.6.22.patch
sata_nv-sw-ncq-support-2.6.22.patch
series
suspend2-2.2.10.2-for-2.6.22.patch
toshiba-bluetooth.patch
udf-2.50-2.6.22.patch
unionfs-2.6.22.patch
usb-storage-unusual-devs.patch
uvesafb-0.1-rc3-2.6.22.patch
xpad-360-support-2.6.22.patch
This build seems to work well with the arch boxes I use, but I wanted to see if there was any community interest in such a kernel before I go through the efforts to cleanup the PKGBUILDS and sanitizing the default configs, etc etc for an AUR submission.
PS - the centrino undervolt patch is my own personal patch for manual undervolting of centrino sonoma cpus.

Hey guys, I am just trying to see if there is any interest for yet another kernel set for arch.
Basically, I had gotten in the habit of building my own kernel package (called neotweek) since about 2.6.19 based on a patchset that was a modification of kamikazee that centred around the ck patches and scheduler. I stopped working neotweek when CK stopped developing for the linux kernel; but I was wondering if people would be interested in a legacy pkg build of this particular kernel. Here is the broken-out patch list.
2.6.22-sd-1.0-boost.patch
2.6.22-sd-1.0-boost-tunable.patch
acpi-buggy-bios.patch
acpi-dsdt-initrd-v0.8.4-2.6.22.patch
ahci-link-power-management-2.6.22.patch
alsa-cvs-20070721-2.6.22.patch
atapi-asynchronous-notification-2.6.22.patch
aufs-cvs-071807-2.6.22.patch
centrino_undervolt.patch
cpu-support-rollup-2.6.22.patch
enable-4k-stacks-default-2.6.22.patch
ene-cardreader-support-2.6.22.patch
ext4-updates-2.6.22.patch
genpatches-2.6.22-2.patch
gspca-20070508-2.6.22.patch
hrtimers-2.6.22-1.patch
hz-864-kconfig-option.patch
ipw2100.patch
ipw2200-1.2.2-2.6.22.patch
ipw3945-1.2.1-2.6.22.patch
iwlwifi-0.1.2-2.6.22.patch
linux-phc-0.3.0-pre1-2.6.22.patch
mactel-patches-2.6.22-1.patch
neotweek-version.patch
patch-2.6.22.1
patch-2.6.22-ck1
powertop-2.6.22.patch
realtime-lsm-2.6.22.patch
reiser4-2.6.22.patch
sata_nv-sw-ncq-support-2.6.22.patch
series
suspend2-2.2.10.2-for-2.6.22.patch
toshiba-bluetooth.patch
udf-2.50-2.6.22.patch
unionfs-2.6.22.patch
usb-storage-unusual-devs.patch
uvesafb-0.1-rc3-2.6.22.patch
xpad-360-support-2.6.22.patch
This build seems to work well with the arch boxes I use, but I wanted to see if there was any community interest in such a kernel before I go through the efforts to cleanup the PKGBUILDS and sanitizing the default configs, etc etc for an AUR submission.
PS - the centrino undervolt patch is my own personal patch for manual undervolting of centrino sonoma cpus.

Are there any interesting tricks that the iphone 5 can do?

Are there any interesting tricks that the iphone 5 can do? Are there any secrets?

How about these:
Apple - iPhone 5 - Learn some helpful iPhone tips and tricks.
50 iPhone 5 tips and tricks - Opinion - Trusted Reviews

Any interest in scheduled network TM and VM backups

Hi,
I spent sometime writing some launchctl and bash scripts to setup Time Machine backups on an Apple Desktop while excluding all meaningless items (Applciations, System Files, Downloads folders, Music etc...) and also excluding VMs from the Time machine backups. It is scheduled on a machine to run based on a CSV file (1 csv file per all machines, located on the hdd of each machine). The script will actually wake up the desktop to run the backup as well.
It also will backup all VMs (Virtual Box & VMWare Fusion) that have been ran in the last week on a weekly basis. Just keeping a single backup every week.
It was important for us to do this as we had problems with a bunch of TM Backups running at the sametime overloading the central backup server.
Any interest so that I post the scripts etc... online?
Thanks~

Hi,
Sorry to jump in on this thread,
Once you change the preferences with the 'Time Machine App' (i.e. to once a week at 8.00pm) how do you go about changing it back in the future if this software isn't an actual application?
Just asking because i'm sure i'll forget the link to this app and not be able to figure out how to change it back to an hourly backup in the future if need be.
I've opened my Time Machine preferences but there's no options to change it back to an hourly backup.
Thanks!
UPDATE:
Sorry, just figured out that I could drag the TimeMachineEditor.app to my applications folder to have it for future changes. It said earlier it wasn't a application so I assumed that it wouldn't create an App programme icon. Sorry, but hopefully it helps someone who had a stupid moment like me
Message was edited by: dherron

Any interesting Annual Reports built with Adobe DPS?!

Hello
I have a client that may be interested in building an app for their Annual Report. Lots of flashy diagrams and charts etc will be needed! I come from a design for print background so I can only use basic flash and I have tried Adobe Edge. Can you export flash to html 5 with the new CS6?
Also anybody got any interesting links to any AR apps that are out there?
Any help appreciated!
Cheers
Gemma

Ya GE's one is not too bad thanks! I downloaded Audi, Bertelsmannan, Carlsberg and Telenet too. Some of them have just taken their print versions and uploaded them which don't really work. Two colums of text and type is not legible etc.
I have tried Hype which seems to be more intuitive than Edge but its probably good to stay with Adobe as it will be more compatible with Photoshop and illustrator?
Cheer
Gemma

Is there any way to limit usage on certain jetpacks?

Hi~
I have a shared everything plan 40GB. I live in the middle of nowhere. I homeschool and need to do a lot online. Area monopolized by satellite which is an awful but necessary evil. When it rains, forget TV or internet. They do still offer dialup. Ha! Anyway, so I chose this plan and it has been "okay". The signal is spotty and the 4G I was told I would get is hardly what I get on my phone when I am in the main cities. Still, we make do.
Here is my current dilemma. My elderly mother in law is staying with us for... a while. She is not a pro, but she can certainly get online. Of course, I have passwords (of my own making). My kid put a password on her laptop when she said she needed to check email. Well, it turns out that granny likes to play online games. The ones that stream. She sucked up all 40 GB in a few short days. Uploads, downloads, you name it. She has been told time and again that the usage was OVER. That she had to wait for it to roll over. She was still going online. I was in a panic with the emails about overages, etc. I had to disconnect the boxes and take out the batteries, just to be sure.
I do know that the boxes can be configured to only work with the mac addresses you designate. That's great. I did that with the first one, but not yet with the newer one, b/c it was only my husband, myself and kids-we are all VERY clear on usage. So, yeah..the one she has been using is the newer one b/c we trusted she would listen to what we told her.
My question is this: Is there any way that I can create a dedicated user "account & password" to her and then limit THAT usage? I know something kind of like this can be done for kids phones, but no clue about boxes. I really don't want to have to block her, but I cannot afford to sacrifice my kids education b/c she wants to play games. My spouse will never deny his mom anything, but he gets mad when told the usage is gone after a week. My usage is about to roll over again and I NEED it.
I asked a rep on "live chat" & they couldn't help-told me to call. I will call, but prefer to do it during the week, when no one will "overhear" and get offended. Any help or guidance would be greatly appreciated.
Thanks in advance'

Windchimes74, oh wow! That is a lot of usage in a short amount of time. We do have a great application called Family Base. You can restrict the amount of time/amount of usage that a particular device can be used. By doing this you can put a limit when Mom is online. Once the jetpack reaches that limit it will not allowed to be downloading anything else. This package is $5 a month for the whole account. It is an awesome feature that I myself use for many lines on my account.
RobinD_VZW
Follow us on twitter @VZWSupport

Any interest in sending emails as Outlook appt. request???

All,
I recently had a business need to send emails as meeting requests in Outlook. There are two ways to do this:
1. The appt is sent as an attachment that a user can open and accept.
2. The appt is sent as the email.
The latter was the business requirement. This is done be combining a vcalendar standard with some things that Outlook needs to see the email as an appointment.
It was a pain in the butt but I've made progress and got it working. It will NOT work with APEX_MAIL.
I'm posting this because I know this is not just ApEx specific but if some people are interested, and the forum administrators don't mind, I'll post some details to get the ball rolling for others.
Please respond to this if you are interested.
Regards,
Dan

All,
Of the two methods I mentioned before I will explain the second: sending the appointment as the email. The trick here, and the reason APEX_MAIL will not work, is that the email is a MIME multipart message that consists of two parts: the icalendar object and the regular message data. APEX_MAIL, at least for now ;), is not robust enough to allow us to create and specify the custom MIME types needed. For the basics on multipart messages see the following...
http://en.wikipedia.org/wiki/MIME#Multipart_Messages
For those of you that have the ability to use Java, the javax.mail package will work BUT REQUIRES MODIFICATION. See the following for details...
http://forum.java.sun.com/thread.jspa?threadID=169827&start=0&tstart=0
If you would prefer to keep your solution in PL/SQL or do not have the ability to use Java, I've included a specification and body for a basic procedure, SEND_MAIL, that can be added to any package. This is only a basic procedure to help get you started and requires EXECUTE ON UTL_SMTP.
All you have to do is call the SEND_MAIL procedure passing a valid icalendar object to the p_body_cal parameter. For details on that see the following…
http://en.wikipedia.org/wiki/ICalendar
I HIGHLY recommend creating a function to create your icalendar objects for you. Let me know if you would like an example of such a function.
SEND_MAIL spec
   PROCEDURE send_mail (
      p_from         IN VARCHAR2
    , p_to           IN VARCHAR2
    , p_subj         IN VARCHAR2
    , p_body_html    IN VARCHAR2
    , p_body_cal     IN VARCHAR2
   );SEND_MAIL body
   PROCEDURE send_mail (
      p_from         IN VARCHAR2
    , p_to           IN VARCHAR2
    , p_subj         IN VARCHAR2
    , p_body_html    IN VARCHAR2
    , p_body_cal     IN VARCHAR2
   AS
      l_connection   UTL_SMTP.CONNECTION;
      l_mail_server VARCHAR2(255) := 'mail.yourserver.com';
      l_mail_port    PLS_INTEGER := 25;
      l_msg_hrd      VARCHAR2(32767);
      l_msg_body     VARCHAR2(32767);
      l_lf           VARCHAR2(2) := CHR(13)||CHR(10);
   BEGIN
      l_msg_body := ''
         || 'Date: ' || TO_CHAR(SYSDATE,'DAY, DD-MON-RR HH24:MI') || l_lf
         || 'From: <' || p_from || '> ' || l_lf
         || 'Subject: ' || p_subj || l_lf
         || 'To: ' || p_to || l_lf
         || 'MIME-Version: 1.0' || l_lf
         || 'Content-type: multipart/mixed; boundary="frontier"' || l_lf
         || '--frontier' || l_lf
         || 'Content-Type: text/calendar' || l_lf
         || 'charset="utf-8"' || l_lf
         || 'method=REQUEST' || l_lf
         || 'component=vevent' || l_lf
         || l_lf
         || p_body_cal || l_lf
         || '--frontier' || l_lf
         || 'Content-Type: text/html' || l_lf
         || 'charset="utf-8"' || l_lf
         || l_lf
         || p_body_html || l_lf
         || '--frontier--';
      l_connection := utl_smtp.open_connection(l_mail_server, l_mail_port);
      utl_smtp.helo(l_connection, l_mail_server);
      utl_smtp.mail(l_connection, p_from);
      utl_smtp.rcpt(l_connection, p_to);
      utl_smtp.data(l_connection, l_msg_body);
      utl_smtp.quit(l_connection);
   END send_mail;Good luck and happy coding.
Regards,
Dan
I forgot to define l_lf...
Message was edited by:
dmcghan

Yamaha 01V MIDI Controller Map - Any interest?

Hello
The Yamaha 01V classic (i.e. not 01V96) is not supported directly under Logic Pro 8, however a passable workaround should be possible by:
1. Assigning an appropriate set of MIDI send messages to each control change in the 01V.
2. Developing an Automation Quick Access set in Logic to respond to these MIDI control changes.
Do you think it would be possible to make an Automation Quick Access which is generic and thereby would respond intelligently to track re-shuffles, track additions and similar? e.g. fader number one on the 01V would always control the volume of "sequencer track 1" rather than "audio channel 1".
The alternate solution if a generic set isn't available is to set up a template song with a track count requisite to song needs, but this is less than ideal because the number of channels/software instruments/buses etc usually varies between projects!
Would love to hear feedback from interested parties.
Carl

Automation Quick Access is for using one controller, like a mod wheel or slider, to control any current automation parameter.
There is no such thing as an "Automation Quick Access set". There is only one automation quick access parameter to learn.
What you want is to use the controller assignments window to create a set of custom controller assignments. Yes, you can handle bank offsets for faders and things like that. make sure you read the control surfaces manual and section, and understand what modes and zones are, and the available functionality in the controller assignments window.
Doing a "complete" (-ish) controller assignments set correctly implementing bank offsets, plugin parameters, mixes parameters, audio instrument parameters and so on is not trivial, and some of the more sophisticated functionality that you get with the Mackie Control such as feedback and other niceties you can't use wihout a custom programmed control surface module (which only Apple can make).
Also be aware that the controller assignments are vey buggy. Do it carefully, make lots of backups of your control surface prefs (these are only saved on exit of Logic) and take it slowly.
Good luck!

Photoshop Premiere 9 vs 13? Are there any problems with CPU usage and crashing?

I stopped using Premiere, because they the computer would freeze and/or the program. I was curious if there was any issue with people currently using Version 13? I think I loaded it on this computer along with Photoshop Elements 9. After a while I just kept Photoshop Elements.
System Specs:
Windows 7 premium home edition
Processor Intel R Core TM i5-2410M CPU @ 2.30 GHz 2.30 GHz
Installed Memory 6.00GB 826 GB free
64 Bit Operating system

stephanies
If 64 bit, while 9 will be a 32 bit application with the limitations of a 32 bit application on 64 bit system, 13 will be a 64 bit application which translates into more computer resources available to 13.
Elements Organizer 9 will not integrate with Elements Organizer 13 although you can convert the 9 catalog in Elements Organizer 13. And there is a marked difference in the workspace between the two versions. Principles tend to stay the same, but features can be moved, changed, or discontinued.
I would have expected Premiere Elements 9/9.0.1 to have worked in your computer environment. Since it did not, I would strongly suggest that you look at the free 30 days tryout of Premiere Elements 13/13.1 in your computer environment to assure the compatibility of it with your computer environment and project goals.
Lots of causes for program crashes (any version).
a. Conflicts with antivirus program.
b. Problem with video card graphics card
c. Use of a pen and table device instead of mouse
d. Problematic source media and format conflicts
e. Not running program as Administrator
f. Poor installation
g. Failure to install QuickTime along with Premiere Elements on the computer
h. Not meeting System Requirements in some way.
i. Other
https://helpx.adobe.com/premiere-elements/kb/system-requirements-premiere-elements.html
Please review and consider. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Any interest in a Device Driver course

My Company is interested in me attending the Sun Solaris Device Driver Writing course.
The only scheduled dates for this are in the US.
Our training Dept. understand that a course could be made available in the UK if we could muster at least 5 people wishing to attend.
If anyone is interested please contact me and we can take it from there.
Please Email directly if you wish
Bruce Levick

Quite old when looking at the dates but I think I'm interested in it.
I'm a radiologist and quite like things working. The distro of my choice is arch, unfortunately the amounts of working dicom viewers is approaching zero.
Besides I like the simple workflow of Arch I'm forced to use three different OS at the moment. (Arch, Win7 and MacOS).
Standard is Arch, Win7 for scientific papers..thanks to endnote. And the MacOS with OsiriX as DICOM viewer.
In some harsh words: That sucks alot!
Besides there are good programs in my Arch world like the DICOM viewer ginkgo-cadx https://aur.archlinux.org/packages.php?ID=47365 or the citation managers zotero https://aur.archlinux.org/packages.php?ID=46784 / mendeley https://aur.archlinux.org/packages.php?ID=44071
I think other programs like GNUmed or maybe aeskulap and many more are also helpful for your daily workflow.
The problem as a doctor is you need things just working everytime and anywhere and for me I'm just to stupid to build and fix things myself.
I've tried though but I failed so far. For these cases I need alot assistance.
So if we could form a team, help each other out and could assure PKBUILD files in the AUR work out of the box I would be totally in. I don't think we need a medical repo. AUR is working quite well.
Anyone else?

Any interested in the V

Is anyone else in the US interested in the Muvo Vidz? It seems like it has the potential to be a great product. I wouldn't want to watch an epic on it but it would be great for some sitcoms and such when you have some time to kill.

Ah right kewl I hadn't heard of that since I'm in the UK.
Thouhg it seems rather nice.
It won't hold too much mind you, and the screen might be slightly too small, but it'd be okay if you only had a small collection.

Any simple example of Usage Data consumer out there? Python?

The sample Billing Adapter is really heavy lifting. We need to get something up and running for simple chargeback proof-of-concept demonstration. Anyone know of any examples in a lightweight language like Python? Thanks.

Hello Scott,
Here is a simple sample project.
Good Luck, Ruben.

Wait_time.v$session_active_history, any interest or benefic usage ?

Similar Messages

Maybe you are looking for